I have had my diamond for about 2 weeks now and the wifi worked fine for the first few days I had it. I did a hard reset to fix another problem and then after that the wifi didn't work. I may have changed a setting but I don't remember. I have looked at every setting that there is and I can't figure out everything. I know that there should be wifi working because I use it on my ipod and laptop. I have tried putting my battery to performance, but that didn't work. Any suggestions of what I can do or try?
you tried the usual? restart ur wireless AP/router? delete the connection on ur diamond, try redo it, does it pick up your wireless AP/router?
Does bluetooth work ok? If not, then its a hardware fault and would need to be repaired.
Yes, I have tried your method beany and my bluetooth works, I just tried and it works fine. I can not get wifi anywhere. My house's wifi doesn't work, and at the gym, it doesnt work. No networks at all even show up. I need a solution.
Go to Settings>Connections Tab>Wlan>Power Mode> Slide the slider to the far left (Best performance). Should fix it
happened to me too the first few times, even when holding the phone up to the antenna of the router it wouldn't connect. i don't know why the "best battery" option is even available
Yes, I know that. That was the first thing I ever did. It didn't help. No wifi shows up anywhere. Is there any settings that I may have changed in Network adaptors?
I need something because it is so annoying with no wifi.
same problem here. No Wifi... But Bluetooth works OK
Maybe some radio patch or something??
I really don't know what to do anymore. My Iifi stop working without reason. I saw some topic about it but it seems nobody now how to fix it.
Please, help me.
I have already updated everything, it works randomly if I reset my phone.
Thanks
Related
I SIM unlocked to use T-Mobile with my SX66 to do a comparison with my Wizard to see how this BA performs: I cant figure out if this is an older unit (05 versus 06??) or a newer one (400 MHz rather than 190 and a 2 megaixel camera on the camera units rather than a 1.3???) and installed Helmi, which has lots of features I don't need but which seems to be the only WM6 ROM around for this unit (?).
Installation went fine and without a hitch but now on boot up, I don't get a splash screen of whatever type: I get the initial bootloader screen, which is curious! But seems to be correct. However on that screen on soft reset, it shows the OS correctly but with a R 1.02.10 and a G of 1337.35. What is unusual is that on hard reset it shows both these settings as empty. Only on soft reset does it show the radio etc.
Slightly more worryingly (as I would like to test out VoIP on this unit) this BA wont connect to the Internet. WLAN is off by default and turning it on just flashes up a list of local WiFi LANs: It wont actually connect to any of them. it does take you through the steps and asks all the seemingly obvious questions (Is this the Internet or a work VPN? WHY SHOULD YOU CARE??) and at the end of the process, it just doesn't connect. Even more annoyingly, when it doesnt connect, it turns WLAN off again, so you don't really know when it did this (or, of course, why). It takes you through all the steps and then gives you the Configure Wireless Networks screen which shows all local networks which you KNOW to be available as "unavailable".
Is this a known problem with Helmi or does anyone recognise what I am doing wrong please?
I had the same problem with my BLUEANGEL (MDA III). The Upgrade to WM6 was totally ok. Everything is working, except the WLAN. Did you tried this: http://forum.xda-developers.com/showthread.php?t=343862
No, it just keeps disconnecting (things getting worse)
player_no1 said:
I had the same problem with my BLUEANGEL (MDA III). The Upgrade to WM6 was totally ok. Everything is working, except the WLAN. Did you tried this: http://forum.xda-developers.com/showthread.php?t=343862
Click to expand...
Click to collapse
The WLAN started trying to connect as I describe but now just doesn't even turn on in Comm Mgr.
Also tried upgrading to xplode but BA loses communication during the upgrade process. (Attempted to ask Xplode himself on that thread and will see if he has any idea)
i donno if this helps but wad i did was i turned on bluetooth. thn i turned on wifi.
it detected my wifi router entered my wep key thn logged on to internet. thn i switched off my bluetooth. i tried surfing and was ok.
i switched off wifi waited awhile thn turn on wifi.. it works flawlessly..for now
edit: u gotta use comms manager
badass7 said:
i donno if this helps but wad i did was i turned on bluetooth. thn i turned on wifi.
it detected my wifi router entered my wep key thn logged on to internet. thn i switched off my bluetooth. i tried surfing and was ok.
i switched off wifi waited awhile thn turn on wifi.. it works flawlessly..for now
edit: u gotta use comms manager
Click to expand...
Click to collapse
Yes, although bluetooth was already working, this seems to do something: I dont know what it is but it appears to be some combination of turning off and turning on again all sorts of things in CommMgr. Now it is working.
I wonder how long it will continue to work? It certainly doesnt let me open VoIP settings while connected. I still get a fatal exception when I try to do so and even though I have inputted all my VoIP settings, VoIP still doesnt work.
Still trying to figure out whether Xplode knows what is causing my failure to communicate WHILE upgrading from Helmi to Xplode.
licensedtoquill said:
Yes, although bluetooth was already working, this seems to do something: I dont know what it is but it appears to be some combination of turning off and turning on again all sorts of things in CommMgr. Now it is working.
I wonder how long it will continue to work? It certainly doesnt let me open VoIP settings while connected. I still get a fatal exception when I try to do so and even though I have inputted all my VoIP settings, VoIP still doesnt work.
Still trying to figure out whether Xplode knows what is causing my failure to communicate WHILE upgrading from Helmi to Xplode.
Click to expand...
Click to collapse
i am a noobie so i don't understand the term VoIP yet as i haven't read thru all FAQs and technical stuff lol pardon my noobness haha
anyway i wanted to update that today very early in morning when i tried using
wifi again the normal way but could not so i followed the steps again... and when it was working i pushed the reset button and till now which is abt 12hrs later still works ok ... i do not noe if its by chance or there is no way it shld work by my steps but it works for me and i hope it works for u too
btw i am using helmi's rom if it helps
cheers
hemi rom wifi not working
wifi not working i've tried it to turn on and turn off but to no avail
licensedtoquill said:
Yes, although bluetooth was already working, this seems to do something: I dont know what it is but it appears to be some combination of turning off and turning on again all sorts of things in CommMgr. Now it is working.
I wonder how long it will continue to work? It certainly doesnt let me open VoIP settings while connected. I still get a fatal exception when I try to do so and even though I have inputted all my VoIP settings, VoIP still doesnt work.
Still trying to figure out whether Xplode knows what is causing my failure to communicate WHILE upgrading from Helmi to Xplode.
Click to expand...
Click to collapse
I have made an interesting discovery about this flaky WiFi on the Blue Angel
pda2kstar said:
wifi not working i've tried it to turn on and turn off but to no avail
Click to expand...
Click to collapse
Often when I try to connect using IE and it says it isn't connected, it IS. I often get the message that I cant connect with the usual reference to completely useless settings pages or an offer to dismiss and give up on the internet connection.
But if I ignore it, I find that I mysteriously AM connected.
Guys,
I don't know if this is actually a cure yet, but it seems to have worked on my first attempt.
First the background...
When I first got my Kaiser (UK Orange Tytn II) I was at work, I quickly enabled the wifi and all was well. When I got back home later that day I really struggled to get a connection to my access point at home. I connect to a Cisco aironet in both locations (I know there is a post about cisco extensions but I know that is not my problem as I can and have connected to both APs on at least one occasion with no problem).
After deleting wireless settings and a few soft resets I was able to connect at home. I managed to use that wifi connection all night without a problem. Getting back into the office the next day resulted in the same problems connecting to the office access point.
The AP is visible and is 'Available' but doesn't connect automatically. I tried to establish the connection manually, the phone shows the AP as 'Connecting' but shortly after goes back to 'Available'.
I've tried flashing different roms and radios but to no avail.
Last night I got to thinking that I generally connect to my AP, browse the web, sync mail etc, but I don't switch off the wifi when I am finished. I just let the phone go into standby as that shuts the wifi off anyway. So to try something different last night, I disabled wifi once I had finished.
This morning, when I got into the office, I enabled wifi and for the first time it connected immediately and I'm browsing on it just fine. This leads me to believe that there is a problem when the wifi is enabled and the phone is is standby mode for a considerable length of time and then is woken up in a totally different location.
I'll test again tonight by disabling the wifi before I leave the office and hopefully I'll get an instant connection when I get home.
Any thoughts?
I get the same thing for work and cannt connect even though it says available, and then connected.
Tried your approach but didnt work for me.
bluemamba said:
I get the same thing for work and cannt connect even though it says available, and then connected.
Tried your approach but didnt work for me.
Click to expand...
Click to collapse
Of course that might be due to any number of factors. Have you ever been able to connect at your office?
i've had issues with my orange (uk) tytnII actually wanting to make a GPRS connection whilst connected to WiFi when i try and go online.
I connect at work using a program called Odyssey and eventually got that working yesterday, but had to turn off most other connectivity before it'd actually use the WiFi.
then I was at a pub later on with a free wifi hot spot, but that wouldn't connect despite it being 'available'
YAY!
Well...
I retested my theory. Disabled the wireless before I left the office. Got home, enabled it and I connected with no issues.
So there is a problem with having the wifi on when the phone goes into standby and it then waking up in a totally different location.
I wonder if WM6.1 addresses this. I hope so because although I have a work around, its still a pain in the a$$
I had similar problems on my Wizard... never had anything like that on my Kaiser.
DarkDvr said:
I had similar problems on my Wizard... never had anything like that on my Kaiser.
Click to expand...
Click to collapse
Could you tell me what radio you are using?
foobar1977 said:
Could you tell me what radio you are using?
Click to expand...
Click to collapse
ROM: DualTouch v3 (dutty's v3)
Radio: 1.27.11.31
No problems with it.. no missed calls, calls come through fine when I'm on HSDPA.. no wifi problems so far.
DarkDvr said:
ROM: DualTouch v3 (dutty's v3)
Radio: 1.27.11.31
No problems with it.. no missed calls, calls come through fine when I'm on HSDPA.. no wifi problems so far.
Click to expand...
Click to collapse
Thanks, I might give that a go when I get a chance.
My problem is similiar. If I connect to a certain access point, it will stop working after a minute or so and then not be able connect to that access point or any other one, they are just listed as available. Strange...
Firstly set your wifi power to max.
Secondly, my orange Tytn2 (now dutty v3'd) has never had that problem.
I leave navizon on a lot of the time and thus enter and leave wifi zones frequently with wifi on and my device connects fine to the regular ones I use.
Wi-fi connection
Hi unwired,
I've been surfing this site, but unable to find an answer yet, a newbie that I am. Is there a way to define one network as default? Anytime I want to connect, I have to do it manually, and define settins, rather than just switch it on, connect automatically and fire away. This is how it works on my laptop, or I have to high expectations from the Kaiser?
Thanks in advance.
unwired4 said:
Firstly set your wifi power to max.
Secondly, my orange Tytn2 (now dutty v3'd) has never had that problem.
I leave navizon on a lot of the time and thus enter and leave wifi zones frequently with wifi on and my device connects fine to the regular ones I use.
Click to expand...
Click to collapse
This is nothing to do with power settings, or at least not for me or several other people I have spoken to. Its generally not a problem when the wifi is on, its after the device has gone into suspend.
I'll bet my bottom dollar that if I set the reg hack so the wifi is always on I wont have this problem but I can't deal with the battery drain.
Just this morning I was connected to my office wifi, went for lunch without switching off the wifi first and when I got back I was longer able to connect to the same access point.
I then deleted the settings for the access point, soft reset and I'm connected again (even if I switch to low power).
To say that this pi$$es me off is an understatement, what kind of wireless device cant handle waking up in a different location to the one it went to sleep in!?
foobar1977 said:
This is nothing to do with power settings, or at least not for me or several other people I have spoken to. Its generally not a problem when the wifi is on, its after the device has gone into suspend.
I'll bet my bottom dollar that if I set the reg hack so the wifi is always on I wont have this problem but I can't deal with the battery drain.
Just this morning I was connected to my office wifi, went for lunch without switching off the wifi first and when I got back I was longer able to connect to the same access point.
I then deleted the settings for the access point, soft reset and I'm connected again (even if I switch to low power).
To say that this pi$$es me off is an understatement, what kind of wireless device cant handle waking up in a different location to the one it went to sleep in!?
Click to expand...
Click to collapse
I have had similar problems. I get disco'ed from my AP at home and it won't let me re-connect. Jut keeps asking for the WPA2 key.
I use the same remedy as you. Turn off Wifi Before walking out of range. No amount of Softreset's fix it for me.
Although, some ROM's work better than others. ie Alex's WM6 ROM would not connect at all, the ROM / Radio in my sig are perfect so far.
P.S. This might also be tied to my router, cause a router reset fixes it for me. But i doubt work will let you try that
DaveShaw said:
Although, some ROM's work better than others. ie Alex's WM6 ROM would not connect at all, the ROM / Radio in my sig are perfect so far.
Click to expand...
Click to collapse
Yeah I'm really hoping that this is fixed in WM6.1 which, if your experience is anything to go by, might well be the case. I really wanted to wait for the official 6.1, but I feel a flash of Duttys 6.1 coming on real soon.
Friends,
I've been proud of my TYTN II for the last thre months that I've owned it... until recently though.
Last week, my WiFi connection stopped getting activated/swichted on. Howsoever, I may try, it would not get activated, leave alone discover the network.
I tried re-flashing it, soft-resetting, hard-resetting, I mean practically everything I could, but to no avail.
Has anyone faced this problem before, and found a solution to the same. Would appreciate if you could share the same with me. I really do not want to take it for servicing, as I fear it would take me easily a week to get it back if I take it to the Workshop.
Thanks in advance,
Atul
Let me ask a couple of questions.
Can you turn wifi on or do you get an error?
If wifi turns on does it see any access points?
have you flashed your rom on your phone?
have you tried another access point for wifi?
do you have any wifi applications installed like wififofum?
Hi Chumley,
thanks for the prompt response...
I do not get any error, not even any message hen I try to activate the WiFi. Just that the rainbow circle keeps rotating (hour-glass equivalent of indows), and then shows the WiFi is still inactive (small x near the WiFi icon).
I tried re-flashig with the latest ROM available on the HTC website, but to no avail.
Trying another access point does not help either, neither would it, I guess, since its not a problem of signal strength, as much as it seems to be of the Wireless on the Kaiser not getting activated.
No 3rd party applications installed either, after the last re-flashing, still no luck.
Anything from the above, that rings a bell?
If it does it after a flash I would think you have a defective wireless adapater. Sorry.
Guess it should not be a problem as mine is still under warranty... just abt. 3 months old. But my only worry is, as I mentioned in the original post, the time it would tk. to get it fixed by the Service Centre, or if at all it is a correctible problem... I think time to ask for a favour from a friend... a standby mobile while I await mine back
If you let it go free and it comes back, then it's yours forever.
Hello, same problem here:
two days ago my wifi connection stopped suddenly and cannot activate it from the comm manager. When I click in the WIFI Icon, rainbow circle keeps rotating and PDA perfomance goes down.
any ideas :?
Hueznar,
I've already given mine for repair at Service Centre two days back, and am still awaiting it back.
Shall let you know how it goes once I get it back
WiFi would not activate: Motherboard concked off
My PDA motherboard conked off... and it wud take 3 weeks to get it back with a new motherboard !!
Oh My God !!
iatul4u said:
My PDA motherboard conked off... and it wud take 3 weeks to get it back with a new motherboard !!
Click to expand...
Click to collapse
@ Iatul
Are you sure this is the only reason & solution, for I have an IDENTICAL matter of the problem, but I never thought something was wrong with the HardWare..., damn I love HTC
I know I saw this thread too late (and finally) but if you please could respond with any news?
thanx
I'm not sure what is wrong with my Wifi...need help
I don't know why...really.
The comm manager stays on good, but when I try an access point it starts with the Connecting... then after a few seconds it stops and goes Unavailable.
My router works good with my bros and sis MAC books.
So I have no idea why.
Can anyone help?
Harkadenn said:
I don't know why...really.
The comm manager stays on good, but when I try an access point it starts with the Connecting... then after a few seconds it stops and goes Unavailable.
My router works good with my bros and sis MAC books.
So I have no idea why.
Can anyone help?
Click to expand...
Click to collapse
mmm I have had the same issue... i changed the ssid and the password of the network and havn't had the prob scince.... not really an answer to the problem but it got me going.... havn't had the problem on other networks yet either
gelf said:
mmm I have had the same issue... i changed the ssid and the password of the network and havn't had the prob scince.... not really an answer to the problem but it got me going.... havn't had the problem on other networks yet either
Click to expand...
Click to collapse
ssid? is this in the router menu?
So.. I tried what you said and didn't worked.
I think it has to be something set in the edit options...
Could you help me?
yeah ssid is the id for the wireless network
i'm not sure why it worked for me... should'nt have made a difference.
have you tried different wireless channels on the router?
increase the power output?
sorry man i don't really know enough about it but happy to try.. pm me if i can answer your question i will
looks like this guy had a similar problem... have you tried what he did?
scowltura
Junior Member
Wifi access point problem
I had a problem where suddenly after months of use with my home wifi router, it suddenly would not connect with the router anymore. Would show that it was trying to connect, and then would suddenly not connect and try another router on the list.
I tried reseting and everything. Tried re-entering the password for my router as I thought that was the problem. finally the only fix i found to work was to actually delete the access point from the phone... then reset and then let it find it all over again from scratch. And miraculously that time it worked.
I know this is not exactly your problem, but hope it helps.
gelf said:
yeah ssid is the id for the wireless network
i'm not sure why it worked for me... should'nt have made a difference.
have you tried different wireless channels on the router?
increase the power output?
sorry man i don't really know enough about it but happy to try.. pm me if i can answer your question i will
Click to expand...
Click to collapse
By changing it to channel 1 in my router, it kinda worked..
It says Available now. Nothing else... The connect option it still there button left.
That's my update.
just in case letting you know that I disabled all MEdia net and ISP GPRS so I won't get charged because I'm not paying for my onlince services or any mobile plan with internet.
My brother told me that all WIFI connects directly to internet and it won't matter if I don't have a plan for mobile.
Correct me here, if im wrong.
Thanks.
gelf said:
looks like this guy had a similar problem... have you tried what he did?
scowltura
Junior Member
Wifi access point problem
I had a problem where suddenly after months of use with my home wifi router, it suddenly would not connect with the router anymore. Would show that it was trying to connect, and then would suddenly not connect and try another router on the list.
I tried reseting and everything. Tried re-entering the password for my router as I thought that was the problem. finally the only fix i found to work was to actually delete the access point from the phone... then reset and then let it find it all over again from scratch. And miraculously that time it worked.
I know this is not exactly your problem, but hope it helps.
Click to expand...
Click to collapse
Thank you... already tried that... I think my problem is different.
So my wifi will see networks, try and connect, then instantly disconnect and repeat. This problem has occurred for the last two roms that I installed. I don't think it is a problem with the rom because one, I havnt read so anywhere, two, i have tried installing and reinstalling and reinstalling again many many times. When I install a new rom, I always factory wipe, cache wipe, and dalvik wipe.
I am currently on Apex latest rom.
Has anyone else had this issue or know how to fix it? It is driving me crazy not having wifi!
EDIT
so it seems by toggling airplane mode on n off, the problem has been fixed. sorry for making this thread
so i thought airplane mode works, but it only did for a lil then keeps messing up. can anyone help please?
turbomalum said:
so i thought airplane mode works, but it only did for a lil then keeps messing up. can anyone help please?
Click to expand...
Click to collapse
Don't know if this will work for you or not. Some have had success...
Go into WiFi settings and 'forget' your network(s), then reset your router/switch and then turn your WiFi back on. Sometimes it will reestablish with the right permissions.
ya i have tried that too. i don't understand what the problem is. I'm bout to just give up
turbomalum said:
ya i have tried that too. i don't understand what the problem is. I'm bout to just give up
Click to expand...
Click to collapse
My problem is similar, it sees my home network and connects (and stays connected), but when I try to access the internet or markets, it says network error and won't let me connect. When I switch back to 3g and WiFi off, now I can hook up to internet and markets.
I'm checking into my wireless router. It might be the problem, tho my wife's computer is hooked up wirelessly and it seems fine, no problems, so idk.
hi there
My wifi either sits searching or no network found it wont pick up any network
Its a stock rom never flashed only official upgrades
i have tried 3 hard rested and each time straight fter the rest it detects the wifi and connects to the network
but after entering my details and syncing mail and other accounts wifi will no longer work
its a bit weird
any ideas
thanks in advance
Steven
one_mad_punk said:
hi there
My wifi either sits searching or no network found it wont pick up any network
Its a stock rom never flashed only official upgrades
i have tried 3 hard rested and each time straight fter the rest it detects the wifi and connects to the network
but after entering my details and syncing mail and other accounts wifi will no longer work
its a bit weird
any ideas
thanks in advance
Steven
Click to expand...
Click to collapse
Hi there, I have the exact same situation, I tried everything, master resets, downgrades of spls and custom roms, and different radios. All didnt work. I asked the same question and no one replied, may mean there is no known solution. I also scoured the web for a whole week, reading almost everything about this issue and trying whatever was suggested to no avail. Now I am selling my HD7 with "the wifi and bluetooth doesnt work".
thanks for the reply and sorry to hear your phone is in the same boat as mine.
Mine seems to be getting worse, slowly affecting other functions of the phone. ive lost count of the hard resets i've done now. somethimes settings wont open, apps dont always open. got to pull the battery to shut the phone off as the screen dulls down if i leave it but it doesnt time off. and the power button sometimes works and sometimes don't.
think unless someone turns up with a magic nswer soon, i'll need to order new phone too. shame coz i really like the hd7
I am having the same problem. Wifi worked fine since I bought the phone on 11/2010, but stopped working last night. When I went to power the phone off, I had to remove the battery because it was stuck on the "Goodbye" screen (the first time this has happened).
Same problem, what can we do?
Scalabrine said:
I am having the same problem. Wifi worked fine since I bought the phone on 11/2010, but stopped working last night. When I went to power the phone off, I had to remove the battery because it was stuck on the "Goodbye" screen (the first time this has happened).
Click to expand...
Click to collapse
Exactly the same problem. I've flashed and reflashed, tried all radios from 5.51, 5.52, 5.69 to 5.71.
After a reset the wifi works once or twice then doesn't work anymore :crying:
Must be the module within the phone. I see the middle housing has two connectors for WiFi and GPS, perhaps the WiFi connector doesn't work but it looks like this little thing is only an antenna, not a module.
The part I meen is a "sticker" that's on the same piece of plastic as the kickstand.
Should i replace the entire inner part or would the antenna be enough?
Help: WiFi/Bluetooth Problem
Hi, I suggest you change the title to 'WiFi/Bluetooth Problem' as I also have the same problem. It does not detect either of the two WiFi protocols (WPA2 & WEP) as I tried both with my router (laptops and androids get them both perfect).
Bluetooth on the other hand, does not pair with ANY device. Brings 'Tap to pair' prompt', then the Error 'Not Supported'. I'm running Dynamics v2.0 - Newer WP7.8 custom ROM, but this was the same even with factory ROM.
So are there any developments regarding the problems here? I still got it, no Wi-Fi, no BT...
I have a problem with my WiFi too. everything was ok since I had my HD7 two years ago, and I started to flash many custom roms a year ago with no problems at all. but one month ago my WiFi stopped working without any obvious reason, my phone was connected to wifi and I put it on the table then I picked it up.... no WiFi at all and no internet sharing also. I can turn on or off the green switch of the wifi but only just for fun! and the Wifi icon which usually pops down from the top of my phone will never appear.
I tried to flash new or old roms, many many hard resets with no luck. Also opened my phone to check if there is a hardwear problem but seems not.
Now I'm using cellular for the internet untill I can buy a new phone and break this one.
Ik must be built in or so. Every flash I do, two reboots later, Wi-Fi breaks.
They just want us to get new phones :/
EDIT
I've also installed two different, brand new, SD-card (1 class 2 and 1 class 10) but this gives the same problem.
On a side note, the class 10 is way, way faster
/EDIT
Same here
The WiFi just stopped working out of the blue and nothing i've done has restarted it. It must be something with WP7 because now the wifi icon no longer appears and the Internet sharing option is blank.