So I've flashed plenty a rom in my day, but for some reason this time I forgot to flash back to an official rom. I was running SNN Diamond, and was flashing to CR86 Touch HD .5 and forgot to flash the T-mobile ROM first and now all it does is boot the first flash screen and everything is the same except the OS version is different. I tried hard reset, but nothing works. Please tell me someone can fix this.
So...
Flash original.... if not...
Try Drugstore solution DIY thread i havent the link but is something like stuck on splash screen search a little...
Not Downgrade dont cause this ISSUE...
So here the deal now. For the last few hours its been trying to boot to the new OS and failed so it reboots and tries again. At a few points I have been able to get to align my screen but then it reboots again. Eventually I was able to establish an activesync at one point and took my chance and tried to flash the T-mobile ROM. It was at about 20% when it entered the 3 colored screen and was disconnected from my computer. After a few failed recovery attempts by the T-moblie ROM (the wizard would keep restarting every few seconds) the update utility gave up on me and in other words said go find a service provider. It stays at the 3 colored screen fine, I go to update, gets to about 1% and starts spazzing out again by constantly restarting.
tl;dr: stuck at 3 colored screen, keeps restarting itself after trying to flash T-moble.
Its due to weak battery,perhaps its not having enough juice to complete the flash.Get the battery fully charged or may be the battery has seen its days,get a new one.
I just tried the Cingular ROM (since it its the Cingular 8125) and I got up to 85% then the progress bar went red and hung up then gave up. The error I keep getting is 302 and how can I charge my battery in bootloader? I tried using Wizard Love and got this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here's what I'd try,
First remove the battery out of the wizard, next put it in. Without turning the wizard on, plug it into your wall charger and wait to see if the light on the phone turns orange. If it does then let it charge till the light turns green and try flashing a stock rom again.
If that doesn't work, you may have to get a new battery and one of those cradles that lets you charge an extra battery without it being in the phone.
raventec said:
Here's what I'd try,
First remove the battery out of the wizard, next put it in. Without turning the wizard on, plug it into your wall charger and wait to see if the light on the phone turns orange. If it does then let it charge till the light turns green and try flashing a stock rom again.
If that doesn't work, you may have to get a new battery and one of those cradles that lets you charge an extra battery without it being in the phone.
Click to expand...
Click to collapse
Unfortunately I tried that, the problem is when I plug in my charger it automatically boots up to the bootloader, if I try to turn it off, its stays off for half a second, led turns orange for another half a second and bam, its back to bootloader.
I think i had the same probleme where my device just keep on reboting on the splash screen. I was able o load new rom but just the os version change. My problem was due to an eprom format error. You can see it during a hard reset. There is a fix for it, if your got the format error during a hard reset (To perform a Hard Reset a)Press and hold the Comm Manager button and Voice Command button on the device b)Keep the two above mentioned buttons pressed,and at the same time,use the stylus to lightly press and hold the Reset button.The phone will restart and ask for confirmation,click 'yes',it'll boot up into windows.), use it.
http://forum.xda-developers.com/showthread.php?t=276963
good luck
yeah the hard reset doesn't do anything, just goes back to bootloader. I'm going to try drugstores DIY when I get a battery charger cause I can't charge in bootloader mode
Now you are reading....
Im happy to heard that.... Like zabardast said battery weak!!! get your batt fully charged... and try agian put in bootloader then reflash the original... if not use the Drugstore solution DIY.
+ Que PPC said:
Im happy to heard that.... Like zabardast said battery weak!!! get your batt fully charged... and try agian put in bootloader then reflash the original... if not use the Drugstore solution DIY.
Click to expand...
Click to collapse
Lets hope its just the battery
So I just tried drugstore's DIY and when it rebooted after the whole deal it just went back to bootloader what now guys? I can flash an official ROM up to 85% (both T-Mobile or Cingular) and it always gets stuck at 85% (turns red) and then goes back to rebooting itself again.
HELP!
C'mon guys, I know someone out there can help me.
Is your phone currently HardSPL'ed, or did you manage to remove it?
RTFM
ezekiel2517lim said:
C'mon guys, I know someone out there can help me.
Click to expand...
Click to collapse
Flash the Button ROM than T-mobile or Wizard Love, than a WM 6.1
Tutorial
Myrddin Wyllt said:
Is your phone currently HardSPL'ed, or did you manage to remove it?
Click to expand...
Click to collapse
I actually don't know if it's HardSPL'ed or not, what do I use to check?
rmcknight said:
Flash the Button ROM than T-mobile or Wizard Love, than a WM 6.1
Tutorial
Click to expand...
Click to collapse
Same issue happens. My wizard calls it quits (around 46%) and reboots. Battery is full every time I try a flash.
Are you sure that you are CID and SIM unlocked?
You can use Wizard Service tool to check.
Highly recomend this tool.
Once you see your information, post it here so that we can help you further.
It should also tell you if you have a G3 or G4 so that someone who is more experienced with G4 (If that is what you have) can help you.
WST doesn't detect my device Wouldn't my CID be unlocked from upgrading it to WM6 in the first place? I know my SIM is unlocked cause I was using t-mobile with a cingular device when it was working. Also its a G3 device.
ezekiel2517lim said:
WST doesn't detect my device Wouldn't my CID be unlocked from upgrading it to WM6 in the first place? I know my SIM is unlocked cause I was using t-mobile with a cingular device when it was working. Also its a G3 device.
Click to expand...
Click to collapse
If you'd flashed to newer roms previously then that SHOULD mean your phone is CID unlocked. Have you attempted the button rom flash yet? It's small and fast, May work for you.
Shane
Yeah I tried using Button ROM, but not success either.
Related
I have enclosed my link to the problems I have with this ROM upgrade. I am looking for suggestions other than bitting the bullet to purchase a new phone, or God help me, taking it down to Cingular to do a complete reflash if possible.
Any assistance is highly appreciated.
http://forum.xda-developers.com/showthread.php?t=276651&page=72
Regards,
jlsenter
jlsenter said:
I have enclosed my link to the problems I have with this ROM upgrade. I am looking for suggestions other than bitting the bullet to purchase a new phone, or God help me, taking it down to Cingular to do a complete reflash if possible.
Any assistance is highly appreciated.
http://forum.xda-developers.com/showthread.php?t=276651&page=72
Regards,
jlsenter
Click to expand...
Click to collapse
if you bother to read the posts u would know that the rom contain no boot loader.thats why you ipl i showing 1xxx
put the device into bootloader mode and reflash aofficial rom.
next time before posting post like this do some reading.
did anyone force you to flash this rom or any other?
faria said:
if you bother to read the posts u would know that the rom contain no boot loader.thats why you ipl i showing 1xxx
put the device into bootloader mode and reflash aofficial rom.
next time before posting post like this do some reading.
did anyone force you to flash this rom or any other?
Click to expand...
Click to collapse
Sorry faria, your wrong.....that is not what happened as you have blasted me; for as my ipl was not 1xx as you stated. I was able to go back into the boot and flash back to 2.17. ABTY, I do read and have been doing flashes of all sorts of electronics for more years that I hate to admit to. Don't be so presumptuous. Not every one can be righteous
if the rom read as 1.2 then its not the right rom
Have you tried
flashing an official rom that includes the bootloaders?
If you do this and then reflash with the rom you say screwed you your IPL should update.
This rom does not contain the bootloaders.
You may have to go buy a new battery (or borrow one that is charged at least 50% from a friend)
Start the device in bootloader mode while connected by USB by holding down voice tag and camera buttons while powering on. You should get the RGB boot loader screen with USB in the lower corner.
Flash a FULL 2.xx rom (preferably an official one from your provider), this should upgrade your IPL and SPL correctly. Then you can go back and re-flash this rom and all should be well.
From what you describe it looks pretty much exactly the same as happened to me earlier in the thread you linked. I had to go buy a new battery to get mine reflashed because I played with it so much with conflicting bootloader/OS/Radio versions that it went dead and would not re-charge in this state.
EDIT: Also if you IPL and SPL are different numbers this may indicate that you are not correctly CID unlocked (not 100% sure on this as it hasn't happened to me, but from what I read on these boards this is the impression that I get) If I were in your situation this is what I would do:
Downgrade to Button's 1.05 rom
run Lokiwiz02b and perform a CID unlock
Upgrade to a 2.xx carrier rom (pretty much everyone agrees to go with a carrier rom first)
Then upgrade to a 2.xx rom of your choice.
Zzan is putting you on the right path, yo do need to get your battery charged before you can flash though.
Also, just so you know when flashing cooked roms most of them use a hacked RUU that will always show the currently installed phone rom to be 1.2. This is so that you can freely flash between roms as the RUU will not normally let you flash to a lower rom version.
Regarding your comments to Faria, clam down. Your orignal post in the other thread is a bit jumbled and I can see where it is easy to think you might have been referring to IPL/SPL being 1.2 as you were not very specific.
When posting you will get a lot better help if you give as much info as possible and organize it clearly. For example say that the RUU showed you currently had version 1.2 Rom installed on your device then nobody thinks you are talking about IPL/SPL.
Finally, When you say things like "x's Rom screwed me" you're going to rub a lot of people the wrong way here (especially when the Rom is clearly marked as BETA). Remember that nobody forced you to flash the Rom and if you are as experienced at flashing as you say then you should have understood the risk you are taking every time you flash your device. Now you should to expect that risk to triple when you use anything marked as BETA. Maybe saying "Help, I'm having problems after flashing xxx Rom" would get you more assistance.
Take my advice with a grain of salt and realize that it is worth exactly what you paid for it so I'm not upset if you disregard everything I said.
jlsenter said:
Sorry faria, your wrong.....that is not what happened as you have blasted me; for as my ipl was not 1xx as you stated. I was able to go back into the boot and flash back to 2.17. ABTY, I do read and have been doing flashes of all sorts of electronics for more years that I hate to admit to. Don't be so presumptuous. Not every one can be righteous
Click to expand...
Click to collapse
this is what you posted;
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Cingular 2.26 Aku 2.3 Update - SCREWED ME
I guess I needed a reason to upgrade to the HP6925 as this update screwed me up big time. Everything appeared to be find during the update....just a very long time to reboot and setup. After setup and reboot again, very slow. The telephone function is completely gone. Icon is there, just nothing happens. Additionally appears to be processing allot of STUFF? as the processor seems to be being tasked as the screen taps are very inconsistent. I tried to restore to my 2.17 AKU2 ROM without success. The USB is no longer operative at all. I have tried to use the IR port, but it is too flaky, and bluetooth is bluetooth....no consistency; can't active sink here either. It no longer tells me about the battery, just empty information. No lights to even tell if it is charging in the cradle, or even just a power supply.
What is really bizarre, is when I tried to restore 2.17 for IR, it read the ROM as 1.2.....someone switch the LINKS load???? IR just bombs after it starts to initiate the load. Then have to go through recovery by removing battery.
Like pissing in a can with a 40mph wind :-(
HELP I HAVE TRIED ALL RESOURCES........lucky I backed up all my data, as I would have been SCREWED even more.
jlsenter
sorry. missread ,and i was not blasting you away.
but still u did not read the posts ,otherwize you would know how to restore your device.it was stated several times .
and since u stated that u been flashing all sorts ,im suprised u did not know how to restore you device. or was it the first time in this device?
Thanks Kyphur, Zzan, & Faria
Thanks for the suggestions; as it now make sense to some of anomalies that I saw. I did go back into the boot and re-flash back to 2.17 with success. The whole reason I started on this path to begin with was because 2.17 was not seeing my 2G memory card.....or should I say "not installed" to be more precise. Then after the ill-fated 2.26 install and re-flashing back to 2.17, the 8125 now recognizes the 2G memory. The 2.17 release has been very stable for me and will stay that way......., besides, my pre-ordered 8525 arrives this Friday.
Kind regards,
and personal apology to Faria if I was too FIERY
jlsenter said:
Thanks for the suggestions; as it now make sense to some of anomalies that I saw. I did go back into the boot and re-flash back to 2.17 with success. The whole reason I started on this path to begin with was because 2.17 was not seeing my 2G memory card.....or should I say "not installed" to be more precise. Then after the ill-fated 2.26 install and re-flashing back to 2.17, the 8125 now recognizes the 2G memory. The 2.17 release has been very stable for me and will stay that way......., besides, my pre-ordered 8525 arrives this Friday.
Kind regards,
and personal apology to Faria if I was too FIERY
Click to expand...
Click to collapse
all happy.....
faria said:
all happy.....
Click to expand...
Click to collapse
Group hug?
dcdivenut said:
Group hug?
Click to expand...
Click to collapse
tellytubbys...... lala...poo... ho **** cant remember the others.
part 1
http://www.box.net/shared/ofzgxbvsbv
part 2
http://www.megaupload.com/?d=OJUWHJ5M
All I know is that theres a 8MB Page Pool on this one.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Haha, I bricked my device. I guess cause I had comm manager up cause I put it in flight mode. Flashing tmobile RUU now and then gonna running this one again.
Part 2
http://www.megaupload.com/?d=OJUWHJ5M
Updated first post with that link. Thanks and when you gonna release yours man! I'm dying to test it out but this TouchFLO is addicting. I'm flashing it as we speak so let's see whats been fixed!
Greetings! The first link seems to be down. Just to double check, this ROM works with all HTC P4350's regardless of previous os?
Model No .: HERA100
Platform .: PocketPC
ROM Version .: 5.4.405.1 WWE
Windows MObile 5.0 OS 5.1.422 (Build 15633.3.2.0)
Kudos on the ROM, looks great on the Herald. Thanks!
Hmmm
Can't get it to work on my wing, right off the bat it says
"the system cannot execute the specified program"
any ideas?
zookolo said:
Greetings! The first link seems to be down. Just to double check, this ROM works with all HTC P4350's regardless of previous os?
Model No .: HERA100
Platform .: PocketPC
ROM Version .: 5.4.405.1 WWE
Windows MObile 5.0 OS 5.1.422 (Build 15633.3.2.0)
Kudos on the ROM, looks great on the Herald. Thanks!
Click to expand...
Click to collapse
It is recommended to run this ROM with the previous ROM version as 5.4.405.1 WWE. This is because there is a problem with the old radio rom and WM6. The first link is up and running, just downloaded using that link. This ROM seems a bit slow with the PP set at 8, but conditions improved greatly setting back at 4. Nice rom but I'll have to return to what I was using before because it seems that the X button issue is still present. Not sure what was upgraded in this ROM but will take a look right now.
i flashed it, X button problems still there so I don't know what was fixed. I'll try it out more tonight and check.
Woohoo!
Ok got it running, so far looks good. For those of you who are flashing this for this first time read this it's very important.
after you run the UPGRADE ROM.bat you'll get an error display on your device screen. DO NOTHING!!!!!!!!!!! don't hit ok, don't disconnect, the device is still being flashed.
When it's done do a hard reset, the T-Mobile start up logo (for Wing users) will display for a bit (3 mins?) but the PDAViet splash screen will appear afterwards.
Good luck, and happy flashing!
Hi, one Question:
i have HTC herald with WM5, never upgraded, never nothing, what exactly i must do to instal WM6 without any crashing?
For T-Mobile Users
see next post
Nevermind
Since this has the new HTC Network Wizard you don't need the info from my last post.
Thanks for the heads up “Neptune”
Haha, ROM installed perfectly! Played for a few mins looks sweet then tried to do a hard reset with no avail screen just stayed at BOOTLOADER.
Preformed a soft reset, os wouldn’t load correctly just stayed at splash screen, tried various things but was still unable to boot past the splash screen. Potentially Bricked P4350 it seems!
Below are the steps I preformed to recover using the search function on the forum and google.
1:. Booted device into BOOTLOADER mode by holding down the cam soft button then inserting the stylus into soft reset button.
2:. Whilst at the coloured screen attached device to computer via USB (you should notice USB appear at the button of the screen)
3:. Downloaded latest ROM for my device from here
4:. Double clicked exe and followed on screen instructions (the updater wont detect your phone because its not connected via active sync don’t worry still proceed)
5:. Wait for the updater to finish, device may reboot a few times this is normal, once completed you shall see the welcome screen.
Potentially bricked device restored, thanks to this forum I don’t have an expensive paper weight. Lots of Kudos to all!!!
I still have a problem, my device wont prompt for hard reset anyone have any ideas? (Stayes at red/green/blue/white BOOTLOADER screen) Searched forums and google for answers no luck yet. Any feedback would be greatly appreciated.
Peace!
failsafe
Maximus-CZ said:
Hi, one Question:
i have HTC herald with WM5, never upgraded, never nothing, what exactly i must do to instal WM6 without any crashing?
Click to expand...
Click to collapse
The radio needs to be version 2.79 for WM6 to work. Also, Its always safe to have a working WM5 RUU ready in case you brick your herald. Please take a look in the wiki if you can find any RUU that works on your device and install it. This should update your Radio to 2.79 if you don't have it yet.
If none of the RUUs in the wiki works on your device, you better retain your current installation and wait for HTC to finaly release the official WM6 RUU.
tried to install, had an error and now I have a brick. Put phone into bootloader screen, try to use the Wing RUU utility, but keeps giving me a connection error. Any help would be appreciated!
nice, it seems i have all in my PC,
i have RUU WM 5 for herald, seems fuction but dont know (i dont tryed)
soo, if i understand if i bricked my ROM, my RUU WM5 will ever set my Herald to manufacture with good Radio version (i have 02.71) so my best way is:
Run RUU WM5, (it will put my Radio Version 2.79)
after i will instal some WM6 by the guide on that WM6...
after that i will got WM 6 works? (i will do some backups of my items in memory)
is that right???
Thoughts on the ROM
Ok so after playing iwth the ROM for about an hour or so, I decided I didn't really care for it. It's just too buggy for me. It seems to be very slow in response time and seems to lag, even with over clocking. Oh well, back to the stock T-Mobile ROM I guess.
anyone have any input? I would really like to get my phone working again!
Installing it over a spanish rom
You think It´ll install if my current ROM is in Spanish? Would I need to tweak anything? I have a
HTC p4350 SO 5.1.422
ROM version 1.8.412.2 ESN
Radio Version: 02.71.90
I don´t mind it resulting in English after it, As a matter of fact, I preffer it.
Thanks.
After a few days using a this rom, I can tell that the ok button problem is not completely fixed... sometimes you still need to fast tap it twice to make it work!
Hi everyone!
I've got a big problem. I Flashed my 3600 (Swisscom version XPA v1510) with Karmba's WM6 in en. 3 Days later i want to flash a ger version. then it has a failure. since then, ever when i want to flash something (wm5, HTC wm6 lit, bepe etc. cid unlock crashproof spl etc.) it goes to 1% or by cid to 7% then my trinity goes black screen, i hear the "usb connection lost" sound on my pc and the RUU says error 270 update error, the image file is corrupt. i loaded down the files several times, on my loc. HD, ext HD, SD card... nothing works. when i turn on my phon normally, the htc screen appears wit a swisscom label at the bottom, with some numbers and then... nothing. i can't do anything. i only can start it in bootlader mod with a key combination... i need my phone, so i need help please! i've seen, when i put in my mini sd and start the bootloader, before the 3 color screen appears, it says "loading" can i eventually flash from the card? i'm really despaired... plz help!
tnx and greetz!
just had the same problem on my trinity. rom upgrade wouldnt go further than 1%, giving me an error 270 on the flashtool on windows after this one percent.
try: splxploit (use forums search).
go into boot loader (camera + power on), close wescomm (or something like that) and rapimgr on windows via taskmanager and start unbrick.bat. after that flash "Hard-SPL". and after that use the rom you like ...
worked for me. good luck.
what u described, i tryed several times. it never works, in 25 tryis the xploit worked 2 times. after that the hard spl goes to 2 or 7 % and then the same... but now i've tryed what u said, with deactivate this 2 ****ing tasks ^^ and look there, it worked! tnx very much! before, i loaded every file from this ftp server wich might help, but there were only 2 tasks... thanks again and have an nice evening! greetz
hehe, glad to hear ...
btw. the problem occurred to me too, when flashing form an english version to a german one. at first it flashed to 20% or so and then disconnected - dropping the phone back to the colored bootloaderscreen. the flashing tool wanted me to follow some steps, which i did, and tried to flash the phone again. and there this 1% disconnect started to happen each time i wanted to flash - independent of the rom i used. after following the steps mentioned above the whole process worked fine again.
Error 270 mean bootloader must be updated.
Search for hard spl on wiki
bootloader? i can update nothing, block at 1% image update. I have the same Version like Blade Hunter, HSPL-1.07.0000
But now i cannot update mit Oli's Hard-SPL, same error. I make it over XP with the automatic installation of Hard-SPL.
Somebody nows an other update methode how works. At the moment i can do nothing with my mobile, like Blade Hunter.
ok, works again after flash with splxploit:
http://forum.xda-developers.com/showthread.php?t=308691
The basic Probleme was the old version of Hard-SPL: TRIN100
SPL-1.07.0000
Perfect!
Hi guys!
I had the exact same problem Blade Hunter described (also with with Karmba's WM6)! I was able to solve the proble by killing the 2 windows tasks that control de usb/activesyn (wcescom & rapiXXX) and using the unbrick tool!
I have successfully unbricked my trinity and flashed a new rom.
Great pda, great xda-dev community!
Flaneur
I have the same problem with my Touch. I am trying to install the following
[WM 6.1] NEW BLUE ELVES ROM V5.0 - CE OS 5.2.2021 (BUILD 19521.1.1.0) (8MB PAGEPOOL)
When The device gets the 3% it shows the following message:
Image FIle is Corrupted. PLease check your update utility.
Anyone could please help me? My device is a HTC Touch with 128/256MB. Thanks for all!
chalid said:
just had the same problem on my trinity. Rom upgrade wouldnt go further than 1%, giving me an error 270 on the flashtool on windows after this one percent.
Try: Splxploit (use forums search).
Go into boot loader (camera + power on), close wescomm (or something like that) and rapimgr on windows via taskmanager and start unbrick.bat. After that flash "hard-spl". And after that use the rom you like ...
Worked for me. Good luck.
Click to expand...
Click to collapse
good bles you
Blade Hunter said:
what u described, i tryed several times. it never works, in 25 tryis the xploit worked 2 times. after that the hard spl goes to 2 or 7 % and then the same... but now i've tryed what u said, with deactivate this 2 ****ing tasks ^^ and look there, it worked! tnx very much! before, i loaded every file from this ftp server wich might help, but there were only 2 tasks... thanks again and have an nice evening! greetz
Click to expand...
Click to collapse
sorry can you describe the exact passage and how you have resolved? i am in the same situation of your girst post...but not understand how to resolve..i ve try to kill the two task, and splxplit work fine and flash the hardspl 1.20 but when i try to flash original rom from PC with windows XP.. it start and load to 13% and stop (not reboot, not errore message) nothing.... if i try to flash only a radio rom it load to 7% and reboot with error message 270 image corrupt..
i am very disperate....
helpppppp!!!!!!
regards
I have the same problem but on my SHadow. I can' t do anything. Help me.
I have the problem,too.
When i run unbrick.bat I Get that picture.
How can I resolve problem?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi,
had the same problem and with the help of you guys I could fix it.
Just for everyone who could not fix it a short summary:
1. To be sure, do all the stuff on a Windows XP machine
2. DISABLE "Allow USB Connection" in Active Sync so you see a small red X symbol next to the Active Sync symbol
3. Start the device into Bootloader mode (Cam+Power+Reset) and connect the device to your PC and make sure USB is written on the bottom of your screen (NOT Serial!)
4. Download splxploit (http://forum.xda-developers.com/attachment.php?attachmentid=39770&d=1180043588) and execute unlock on your PC
5. Follow the instructions
6. Download HardSPL (http://forum.xda-developers.com/attachment.php?attachmentid=45018&d=1185364317) and follow the instructions
7. Finally (to be sure) restart into Bootloader mode and check if SPL is showing "SPL-1.30.Olipro) - if this is the case you've done it !
8. Flash your preferred ROM via miniSD or USB connection
Hopefully this should be clear to everyone
Cheers
Try using/buy better USB cable. Cable with Ferrite core is recommended. Happened to me once.
Hope thet help.
FACEOFF!
Thanks a lot ... you saved my day!
Chalid,
Hey man, Thanks for this info! I have been pulling my hair out over this phone for ages, finally the info you've given has been the breakthrough I needed! God bless!!
Hello all:
I turned on my AT&T Tilt (8925) and for no apparent reason I got a pattern of red, green, blue and white stripes.
On the red stripe it says:
KAIS1*0 MFG
SPL-1.0.OliPof
CPLD-8
On the white stripe it says "Serial".
It won't go pass the stripes. I performed hardSPL about a year ago if that matters.
Any ideas what's going on? Any help would be appreciated.
Thanks.
try plugging in the cable and turn on the phone, if it says usb where serial was before you should be good to go, you'll probably have to do a hard reset or upgrade your spl and load another rom.
If by hard reset you are referring to taking out the battery, I have already tried that.
Just before the red, green, blue and white stripes there is a brief messege saying: Loading...No image
I am guessing I lost my ROM.
How do I upgrade SPL and install ROM without an ActiveSync connection??
Thank you
Why not start reading the forum. This is covered MANY times.
To upgrade a rom look here
http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser#ROMx20.Upgrading
To hard reset ( Removing a battery does NOT perform a hard reset ) look here
http://wiki.xda-developers.com/index.php?pagename=Kaiser_Resets
If you cant get your phone back up and running, use this as your last resort.
http://forum.xda-developers.com/showthread.php?t=371154
Next time read......... this is ALL on the first page of the Kaiser wiki........
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
kooresh said:
If by hard reset you are referring to taking out the battery, I have already tried that.
Just before the red, green, blue and white stripes there is a brief messege saying: Loading...No image
I am guessing I lost my ROM.
How do I upgrade SPL and install ROM without an ActiveSync connection??
Thank you
Click to expand...
Click to collapse
Just download spl 3.56 flash that get a new rom and run it if it recognizes the phone there is a connection, proceed and phone should come back to life, try romeos v4 very good rom.
u cant play with spl now cuz u dont have an os therfore not able to run sspl
its weird problem and i think its caused by corrupted rom image... try to flash ur rom - ur device appears unlocked still try to flash a shipped rom att or htc depending on ur device
good luck - u should have ur phone up and running after a flash
btw as soon as u flash - perform a hard reset
use shipped rom
use wm 6.0
kooresh said:
If by hard reset you are referring to taking out the battery, I have already tried that.
Just before the red, green, blue and white stripes there is a brief messege saying: Loading...No image
I am guessing I lost my ROM.
How do I upgrade SPL and install ROM without an ActiveSync connection??
Thank you
Click to expand...
Click to collapse
this screen is aka as the bootloader
kooresh said:
Hello all:
I turned on my AT&T Tilt (8925) and for no apparent reason I got a pattern of red, green, blue and white stripes.
On the red stripe it says:
KAIS1*0 MFG
SPL-1.0.OliPof
CPLD-8
On the white stripe it says "Serial".
It won't go pass the stripes. I performed hardSPL about a year ago if that matters.
Any ideas what's going on? Any help would be appreciated.
Thanks.
Click to expand...
Click to collapse
Thanks all.
Apparently I have a bad microUSB among other things. The issue with the HTC microUSB is documented here. This may or may not have caused this. I plugged the USB cable as bibobrian suggested and the device moved on beyond the stripes, but problems with microUSB persist. I am going to try to fix it and update you.
Thanks for your help.
I've the same problem, ad although I've tried reading the threads I am techologically challlenged; stoopid.
I've plugged in the XTC via the USB cable and indeed the USB notification replaces the word serial.
However, the hard reset does nothing. It sayd you should do this with the phone not connected or charging, so as soon as I disconnect the cable it reverts to the word serial. Either like this, or still connected, a hard reset just re-generates the three coloured screen.
I guess that I could work my way slowly through the ROM stuff etc, but not until I can hard reset.
Any more sugestions that an idiot like me could follow? Otherwise, it's off to the O2 shop to get it sent off for repair.
kooresh said:
Hello all:
I turned on my AT&T Tilt (8925) and for no apparent reason I got a pattern of red, green, blue and white stripes.
On the red stripe it says:
KAIS1*0 MFG
SPL-1.0.OliPof
CPLD-8
On the white stripe it says "Serial".
It won't go pass the stripes. I performed hardSPL about a year ago if that matters.
Any ideas what's going on? Any help would be appreciated.
Thanks.
Click to expand...
Click to collapse
to flash ur phone
dude you are doing fine
just follow the following instructions and u wil lbe fine
i am assuming u r stuck at the bootloader
1-charge ur phone for about 1 hour
2-download an official rom for example example http://210.64.124.194/download/TyTN II_SEA_WM6.1_Upgrade_20080602.zip
3- plug ur XTC via the USB cable - u will get the word usb
4- run the file u have downloaded from step 2
5- follow the screen instructions
6- you will flash ur phone to a shipped rom wm6.1
enjoy technology its fun
t40ora said:
I've the same problem, ad although I've tried reading the threads I am techologically challlenged; stoopid.
I've plugged in the XTC via the USB cable and indeed the USB notification replaces the word serial.
However, the hard reset does nothing. It sayd you should do this with the phone not connected or charging, so as soon as I disconnect the cable it reverts to the word serial. Either like this, or still connected, a hard reset just re-generates the three coloured screen.
I guess that I could work my way slowly through the ROM stuff etc, but not until I can hard reset.
Any more sugestions that an idiot like me could follow? Otherwise, it's off to the O2 shop to get it sent off for repair.
Click to expand...
Click to collapse
Hi Jahrami,
Thanks.
Just tried it but looked like I got a corrupted file through the download as it wouldn't run/unpack. I'm downloading again, and will give it another go when I have it.
I don't usually have much success with these things, so wish me luck! Or it's a 2 week wait for a repair.
Hi Jahrami,
No joy. Can't get an Active Sync connection. This is why my PDA wasn't backed up in the first place, as I haven't been able to get it to connect for months.
I could see it as a storage device, but Active Synch wouldn't recognised it. Possible because I'm using Vista? Can't see it at all now, and just downloaded device centre again.
Off to the flipping shop.....
Hi, i am from Turkey,
I have a Touch Diamond (Diam100) bought from Norway. I just loaded a new radio ROM onto my phone (I am security unlocked and sim unlocked and hard SPL'd, thanks to Olinex!) and everything looked to work fine, the status bar got to 100% and the phone rebooted as usual after a new ROM load
However - it is completely stuck in a cyclic reboot. I get the HTC startup screen and then it just reboots again and again. I tried a hard reset and got the confirmation message that it was restored OK, press volume up to boot. However it does the same reboot again and again
I tried some thing like that:
*Try to install "RUU_Diamond_HTC_NOR_1.93.409.1_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship" stock rom, but it freezes at %13
*Try to install stock radio rom "Diamond_Radio_1.00.25.05" bu it freezes at %95!
*Try to install stock spl, everything looked to work fine, the status bar got to 100% and the phone rebooted as usual after a new ROM load but the problem seems again!
i can install cooked roms, but after restart this problem happens again and again!
Can you help me please? I love my phone very much.. (
(sorry for my poor english)
Hi, try MTTY your phone. log in to use search in these fora and find "The definitive MTTY thread". It's a bit of...homework to do but will get you out of this.Your issue is caused by certain undeleted items which remain after a rom flash as far as i've learned.I hadn't have to do it until after several ROM flashes but guess sooner or later everybody faces it.Well it's time you did it too...
Cheers
[email protected] said:
Hi, try MTTY your phone. log in to use search in these fora and find "The definitive MTTY thread". It's a bit of...homework to do but will get you out of this.Your issue is caused by certain undeleted items which remain after a rom flash as far as i've learned.I hadn't have to do it until after several ROM flashes but guess sooner or later everybody faces it.Well it's time you did it too...
Cheers
Click to expand...
Click to collapse
hi, i tried it step by step. but nothing happens
Hi,
Dude, that's frustrating, however as i understand it's a stock SPL you've presently got on your phone, right? I don't know which SPL version you've had before but just in case, try to update to HSPL version 1,93. Then try flashing a ROM you like.If problems persist MTTY your phone again after having upgraded HSPL.
And a word of advice based on own experience: Not all radios are compatible with all ROMs and vice versa...
Hope you're soon going to get this right,
Regards from Greece
merinos said:
Hi, i am from Turkey,
I have a Touch Diamond (Diam100) bought from Norway. I just loaded a new radio ROM onto my phone (I am security unlocked and sim unlocked and hard SPL'd, thanks to Olinex!) and everything looked to work fine, the status bar got to 100% and the phone rebooted as usual after a new ROM load
However - it is completely stuck in a cyclic reboot. I get the HTC startup screen and then it just reboots again and again. I tried a hard reset and got the confirmation message that it was restored OK, press volume up to boot. However it does the same reboot again and again
I tried some thing like that:
*Try to install "RUU_Diamond_HTC_NOR_1.93.409.1_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship" stock rom, but it freezes at %13
*Try to install stock radio rom "Diamond_Radio_1.00.25.05" bu it freezes at %95!
*Try to install stock spl, everything looked to work fine, the status bar got to 100% and the phone rebooted as usual after a new ROM load but the problem seems again!
i can install cooked roms, but after restart this problem happens again and again!
Can you help me please? I love my phone very much.. (
(sorry for my poor english)
Click to expand...
Click to collapse
before you upgrade the radio, whether it has been unlock device with the XDA Unlock Application ..? try to hard reset your device after that make sure the device go to the boot loader (3 colors screen) and reflash with the official ROM!! then unlock the device and immediately you can do to upgrade the radio (at the time of upgrading the radio make sure the SIM card removed)
[email protected] said:
Hi,
Dude, that's frustrating, however as i understand it's a stock SPL you've presently got on your phone, right? I don't know which SPL version you've had before but just in case, try to update to HSPL version 1,93. Then try flashing a ROM you like.If problems persist MTTY your phone again after having upgraded HSPL.
And a word of advice based on own experience: Not all radios are compatible with all ROMs and vice versa...
Hope you're soon going to get this right,
Regards from Greece
Click to expand...
Click to collapse
hi, i can not change the hspl, i tried again and again, but nothing changed.
(hspl olinex 1.93 signed and unsigned versions)
i tried to change the hspl to stock spl, installation was going and everything was ok (%100 inst.) but after restart, spl 1.40 olinex in bootloader mode again!
i don't know how can i change this 1.40 spl. i think the main problem is spl and radio rom.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hakim Rahman said:
before you upgrade the radio, whether it has been unlock device with the XDA Unlock Application ..? try to hard reset your device after that make sure the device go to the boot loader (3 colors screen) and reflash with the official ROM!! then unlock the device and immediately you can do to upgrade the radio (at the time of upgrading the radio make sure the SIM card removed)
Click to expand...
Click to collapse
hi, my device is security unlocked, and hspl version is olinex 1.40.
i can not acsess to os, it just stay in the touch diamond screen .
thanks for the solution.
merinos said:
hi, my device is security unlocked, and hspl version is olinex 1.40.
i can not acsess to os, it just stay in the touch diamond screen .
thanks for the solution.
Click to expand...
Click to collapse
you have to do is to Hard Reset your device and reFlash