Hi,
I am new to the forum and I recently purchased a HTC TyTN 2 (Kaiser) and have a few issues which i hope that you all can help me resolve. There is no sound on the phone. The ringtones don't work and when I try to play music I hear nothing. The speaker is good since the speaker phone works. Please Help. Also when I take standard photos they do not save neither on the memory card nor the internal memory. It also reacts very slowly to stimulus i.e. programs take very long to load ets. I really need help. Thanks
ArvinSR said:
Hi,
I am new to the forum and I recently purchased a HTC TyTN 2 (Kaiser) and have a few issues which i hope that you all can help me resolve. There is no sound on the phone. The ringtones don't work and when I try to play music I hear nothing. The speaker is good since the speaker phone works. Please Help. Also when I take standard photos they do not save neither on the memory card nor the internal memory. It also reacts very slowly to stimulus i.e. programs take very long to load ets. I really need help. Thanks
Click to expand...
Click to collapse
Have you recently flashed your ROM? Any information like this would be useful...
If so, did you upgrade your radio at the same time - you are probably using the wrong one.
Ta
Dave
1. - What version of the TYTN II do you have?
2. - What ROM is installed?
3. - Was it NEW or USED when you bought it?
4. - Please post your BOOT SCREEN information here as well.
5. - Have you tried yet a SOFT / HARD RESET?
6. - Have you tried to reflash the device with the ORIGINAL SHIPPED ROM?
(Read the TYTN's Wiki to figure out what ROM and for BOOT INFORMATION and also how to perform a SOFT / HARD RESET)
Check as well your VOLUME SETTINGS (Speaker symbol at the top bar).
Hi,
Its the Kaiser (that's what I got from the Device Info). The ROM is new and I haven't flashed it. I ried both a hard and soft reset yet nothing. The speaker settings are fine and still nothing. I assume the device was new. I don't exactly know what the boot information is but these are the things that come up to the bottom of the screen when it starts up:
R 1.27.15.32
G 22.51.88.13H
D 2.02.00.00
hi sorry the last one is
D 3.02.00.00
Related
I have a XDA II here, It was work fine, but after I tap a file in the Windows folder, then my XDA softreset itself, after the XDA can still turn on, all button is functional, but just problem to tapping on screen, when tap on screen it has on repond (the screen is on).
I also tried hard reset but all data is still here, weird?? I though hard reset will let me go back to the default setting, but it doesn't change anything except the clock go back to Sept 2003.
PH10B
Radio 1.10.00
G 1337.18
D 1.60a00WWE
my problem with the screen is that it can not be alligned, everytime i try the cross goes round and round and it simply wont start. i have tried at least 6 different roms hard reset but problem remains :x :x
I NEED HEPL GRAHHHHHHHHHHH
PDA2 same problem
Hi All,
I have a PDA2 and for some reason tapping on screen stopped working, I tried hard reset too but I cant tap on the screen anymore. Kindly help. PDA is in super shape I have also upgraded it with the latest patch from clubimate but cant tap the screen.
Nothing is broken and it happened while I was typing a note. Pls Pls help
Qamar Bukhari
[email protected]
we should create a club and name it the fellows with the x-screens :x :x :x
Hey guys do something, where are the experts ??? I am sure its just software problem, I installed some software and next morning touchscreen was not working. I didnt dropt the pda.
Qbukhari.
Just a thought, try putting the device into bootloader mode then hard resetting the device.
Also try putting it into bootloader mode, updating the complete ORIGINAL rom and hard reset to complete the install.
Bootloader mode = power button + reset button + action button right ???
I have done so, problem still there
I have replaced the ROM downloaded from clubimate ----- problem still there
I have also tried to replace the XDAII rom ------ problem still there
now tell me where to get the ORIGINAL ROM ??? I am sure if the original rom is inserted it will be working again. btw pug can we talk online ? I am online now
[email protected] (msn messenger)
qbukhari.
hey all, I finally solve this problem, in the hard reset screen, there is menu for me to choose what to do in during the hard reset, like clear storage, registry... and i choose to clear all, then my XDA II is now work fine. (in the hardreset menu the backlight will not on, so it is not visible to find out the menu, also to change the setting use the botton of record, camera & volume button to control the menu.) good luck everyone!!
Thats a relief
Hi kindly tell me how to find that menu ?? I am sure I didnt damage my Alpine its just software problem let me fix it too.
Tell me how to find that menu during a hard reset plsssssssss
qbukhari.
WHERE IS THAT MENU??????????????
Menu ????
Still waiting for a reply, kindly tell me how to access "Clear Storage" function during the Hard Reset
qbukhari.
probably fake trying to make impression :?:
Too Sad
Dear Kabintos,
When you go in the setting/memory it is displayed total 122mb main memory in my PDA2 is this the same situation with you too ?
qbukharil.
The bootloader menu is not, as far as I'm aware, on the Alpine as it automatically detects network frequencies etc. Henrypak mentions XDA II not XDA IIi.
The program memory and so on in the Memory tab is only 122.04MB. Memory is quoted different to how most people think. 128000000 / 1024 / 1024 = 122.0703
The .03MB is taken up with partitioning of the memory to allow for storage etc.
Have a look at the hard drives on your computer for example, a 30GB hard drive is only 27.9GB. It's just how the manufacturers quote storage space, in thousands of bytes. Computers work them out in thousand and twenty fours of bytes.
To be honest Qamar, the more I think about your problem, the more I think it is a hardware issue, not software. If you've recently purchased the Alpine, it will still be under warranty and you should be able to take it back for an exchange. If not try opening it up and removing and reconnecting the ribbon cable for the screen from the mother board.
Obviously you've tried flashing it again, if the touchpad isn't working then you can't get past the screen alignment at the beginning of the ROM installation after a hard reset.
Out of curiosity, if the touch screen isn't working, how did you get to see the Memory status on your Alpine? None of the buttons are defaulted to settings or the start menu.
PDA2 live again
Hi All,
Well well well, here I am back in the game again. It was at the last moments when I was almost ready to send my Alpine for repairs when I got tip from a friend from uk. He sent me a tool to format storage completely.
After reseting the Alpine with reformatted storage the touch screen was back a bit misaligned though, after aligning it once its 100% fit now. How can I thank you my friend ???
Cheeeeeeeeeeeeeeeeers !!!!!!!!!!
qbukhari.
gbukhari pls send it to me m8 pls pls and ill thank you as you were thanking your firend that send it that to you :lol: also i wanted to ask you if you test really hard your machine after that in case it would do the same thing again
my email [email protected]
Can someone post a 100% tried and tested solution to the tapping problem?
TIA
Yeah...!
Can someone please post some instruction on sortingthis issuse out....
Lossing sleep over the thought of having to replace my screen.....
Cheers,
-R
Hi everyone,
I had exactly the same issue with my XDA2i about a week after I purchased it (around 3 months ago). I was happily browsing the web over wifi around a friends house when the screen locked. I had to hard-reset to get it up again but it got stuck in a loop whilst aligning the screen, it wouldn't go past this stage at all.
I phoned the online shop I bought the device from and they told me they had had lots of people reporting the same symptoms and that they had identified a faulty batch. I was sent a replacement from a new batch about 4 days thereafter. The new one has worked fine ever since.
If it is a software issue that's fixable, great, go for it. But if your device is still under warrenty I'd suggest getting a replacement - worked for me!
Sorry I can't be a bit more posistive but thought I'd let u all know.
*server duplicated post*
bought my IIi for almost 1.5years and suddenly now suffers several problems;
- O2 Connect application gone after hard reset.
- AutoConfigure also gone.
- Touch screen alignment totally gone mad so i have to use buttons only.
just hope anyone here can kindly give me at least links for me to overcome the problems. till now i did not do any ROM upgrading yet. i searched this forum and found some info but it didn't help much.
thanks!
sheikhcattivo said:
bought my IIi for almost 1.5years and suddenly now suffers several problems;
- O2 Connect application gone after hard reset.
- AutoConfigure also gone.
Click to expand...
Click to collapse
As you've already done a hard reset and so dont have any grat data to 'lose' by doing another), my suggestion would be to do another, by removing the main battery for at LEAST 1 hour to drain the backup battery also, so doing a 'true' factory reset. If your still happy with all the O2 stuff (I scrapped mine as soon as possible as it seemed to slow it down a fair bit) when you replace battery this should restore it from the auto-installer cabs you will have on your O2 extended ROM.
- Touch screen alignment totally gone mad so i have to use buttons only.
Click to expand...
Click to collapse
Whilst the device is off and draining the reserve battery, take a small piece of card and run it around all four edges of the touchscreen where it meets the casing. Sometimes a lot of crap can build up in there which inteferes with the touchscreen's ability to detect where the touch has been made, also take this opportunity to the screen with a screencleaner once this has been done (pretty much any will do, I use stock windowcleaner from the pound shop myself!)
Rom upgrading is easy once you have the required installer and some patience: a quick search for Alpine ROM upgrade should bring up plenty of posts, some by the authors of some of the modified rom packages themselves, explaining in detail the steps to take to upgrade the unit. It takes a little patience and in about half an hour you will have a PDA without all the extra stuff you don't need, that has (probably) an upgraded radio & camera (better signal strength, and pictures)
Hope this is of some help
Joe Pinball
Hello all,
since yesterday plugging in my headphones which were shipped with the device doesn't work anymore. Usually i see the headphone icon on the titlebar but now i dont. Also applications requiring headphones (e.g. FM-Radio) tell me to plug them in although they are already plugged. Soft-Reset didn't work neither. Anybody else having this issue or even solved it?
Regards,
Chris
PsychoChris said:
Hello all,
since yesterday plugging in my headphones which were shipped with the device doesn't work anymore. Usually i see the headphone icon on the titlebar but now i dont. Also applications requiring headphones (e.g. FM-Radio) tell me to plug them in although they are already plugged. Soft-Reset didn't work neither. Anybody else having this issue or even solved it?
Regards,
Chris
Click to expand...
Click to collapse
I am right now in the same situation. Do not know what happened. The phone was stuck (hung up), and I had to reboot. (i recently flashed on bepe 0.94 - but now reflashing).
Well - will now flash to bepe 0.95 - hope it will help...
in case not:
PLEASE HELP
---
so: did a re flash and still the headphones do not work =( open for all help!!!
In addition: when I softreset with the headphones attached: the diamond stays on the red green blue white display, telling:
Diam100 MFG 64 M
SPL-1.40.OliNex
MicroP-Diam (LED) v11
PSOC-Diam STAGE-PVT c0x30
Serial
That happend never befor!
Same Here. I also did a hard-reset with no result.
PsychoChris said:
Hello all,
since yesterday plugging in my headphones which were shipped with the device doesn't work anymore. Usually i see the headphone icon on the titlebar but now i dont. Also applications requiring headphones (e.g. FM-Radio) tell me to plug them in although they are already plugged. Soft-Reset didn't work neither. Anybody else having this issue or even solved it?
Regards,
Chris
Click to expand...
Click to collapse
Hi,
Did any of you found a solution?
Regards,
David
Hi again!
i've done it!
How? Go to Config/Erase (or delete) memory. This will reset your machine to default values and you will lose everything so sync your contacts and backup all your stuff before.Then, upon second restart plug in your headphones and that's all! Headphones are detected again!
Hope this helps!
Regards,
David.
When I plug my headphones in, they work, but I always hear a hiss in the background and I need to put the volume down to ~6%. Otherwise I would become deaf. Does any one have an idea how to fix this?
Edit: Rom: 1.37.407.2 GER
Guys, first post here xda forum with good news!
I've been searching for more than 6 months trying to found some solutions for this problem without erasing the flash memory, because I had so many applications and data that I didnt wanted to re-install them.
I did not found anywhere.
Using PHM Registry Editor, I was able to change the value for HKLM/System/State/Hardware/Headset from 0 to 1 once or twice and then I did a soft reset with the headset plugged in.
BINGO! It was recognized once again! And right now it is recognized every time a plug it in.
Well, it worked for me without erasing the memory. I hope this helps all Diamond owners with the same problem.
Rodolfo - Brazil
i started having this problem a month ago. after boot the PPC writes something in red and after a few seconds gets black
i recorded it so it would be clearer
http://il.youtube.com/watch?v=NAHqAZS2nZ4
i tried installing a few roms and even the original one from htc website
i would appreciate any help you can give me
Very strange. What SPL version doyou have? Have you used cooked roms? Anything else happend to the phone?
HTC trinity original ROM
Here is the original HTC Trinity ROM:
http://rapidshare.com/files/202845245/Trinity_HTC_WWE_1.15.405.5_6275_1.20.00.11_12201_Ship.zip
1. Press on/off button + camera button + reset (using the stylus)
2. You should now be in tricolor screen.
3. Connect the usb cable.
4. Make sure you have activesync runing.
5. Install the rom provided in the link.
In the link you will find rom+radio. (Radio version 1.20)
Here is a newer radio version 1.56:
Hey! My trinity have the same problem!!!
I habe all test: Without sim, without SD, with SD, with SIM (with SIM screen is grey)
What have you done?
Original ROM - same problem
Mine was doing this earlier
seemed that their was dirt stuck in the reset button hole causing it to stick in slightly
I got this problem too. My trinity would turn on and start to fade away. But mine was a liltle more artistic. Many times i saw a kinda round spot in the middle of the screen that become black, then half of the screen would black out and then the rest of the screen. Sometimes i even got colors.
I noticed if a had a fully charged battery the phone would work perfectly.
But most of the time it turn on, but the screen stayed black with the retro light on.
I was told to try the unbrick exploit.
me too !!! i have the same problem with my htc 3600 ? can someone help us to fix our htc's 3600 ?thanks in advance....
have you fix it ?
hi all
I have a small problem with my htc p3600. It's not starting. It's loading only the bios but it's freezing with the screen picture and is not loading the WM 5.0 I try to change the WM5.0 with a new one but I don't have a active sync. connection.Please help
has anyone found a solution to this problem ?
anyone have a solution?
Finally, what you should do?
Since the Trinity / P3600 is getting old now, I believe more and more people are going to face this strange problem sooner or later.
So I thought I should save your time and tell you what you should do when your trinity starts behaving like what was described at the beginning of this thread.
YOU SHOULD DO NOTHING !!
THERE IS NO QUICK FIX
THERE IS NO WORKAROUND
THERE IS NO CHEAP SOLUTION
I have searched and tried everything mentioned in this forum that might slightly be related to the problem and all solutions failed.
So after days and days of experimenting, I gave up and sent my device to HTC dealer who called me few days later to tell me that the mother board needs to be replaced.
The dealer told me the cost will be around $213, but they said they are going to sent it back as it is, because they don't have that board model anymore!!.
Even if they had, for an old device like this , I don't think it worth that mush money to fix.
**************************************************************************
*SO BASICALLY , DON'T WASTE YOUR TIME TRYING TO FIX IT AND BUY YOURSELF A NEW ONE. *
**************************************************************************
.
.
.
.
Hello,
I resolve the problem with this : Simultnous press Power and Camera buttons and softreset, you'll got bootloader, three colors mode. Perhaps a little error message like this WLAN error but if you plug usb, it's ok.
Hope this good for you (excuse my poor english)
I've had this same problem for about a year now and keep coming back to it.
Any forward momentum on solving the problem would be appreciated as I quite like this phone.
1. The phone will boot FINE without a SIM
2. It hangs like in the video (or other strange screens) as soon as I insert a SIM card (partially or fully)
3. I've tried 3 different SIM cards
4. I have no SD cards
5. I have installed 3.20.Olipro
6. An official ROM is re-installed
I must admit the phone has had a hard life (or is it just the cheap plastic coatings HTC use)
No sooner did I post this did I find a solution.
For anyone that is interested...I have managed to re-install the original HTC ROM but HAVE NOT managed to install a workable 6.5 ROM yet.
So, the answer I found was:
1. Put P3600i into bootloader mode (push camera+power+reset buttons for 2 secs and get triple colour screen)
2. Re-flash HardSPL 1.1 from my PC
3. Re-flash original HTC ROM (WWE_3.00.707.18_6275_1.46.30.11_108) by agian putting P3600i into bootloader mode first
I since tried several different radio stacks but haven't noticed any difference in reception so have left the original stack on (1.46.30.11) as it gives the best phone call quality
I love the UI of the latest WM6.5 but if the P3600i doesn't run them properly I'll just have to do without.
Good luck with your own unbricking.
it was working fine for me when i put a little piece of rubber between the processor and the metallic cover of it but after 3 months i have the same problem and the paper dont work anymore.... now when i press the power button the screen is black, only the backlight is working anyone have any ideas what to do?
OMG WTF, as soon as I saw this thread I switched my HTC P3600 on and it started doing it I reckon this is cursed, I will upload a video onto Youtube later and show you that is what happened.
I had this problem myself, didnt know what i was doing wrong, altho my tri color screen did this, not the boot one.
I removed memorycard and voila, everything went smoothly.
edited
sorry 4 my mistake
Hey guys, i looked all over for an answer before posting this here , but no luck.
This is what´s happening, i have a kaiser tytn II which i had problems, was going extremely slow, i removed some apps that i had installed including tomtom and same thing, so i thought about the soft/hard reset, i did it, and now......its crazy, i can´t use the touch screen, example : i want to enter my pin code and when i press number 6, it only presses number 2. its like the whole thing is messed up and the theme is really ugly, grey color . I thought maybe i could install a new firmware with a nicer looking and might solve the issue, but i don´t know where to get it and how to install it. Could someone help me how on some tips please ?
Thank you so much in advance
luisdesigns said:
Hey guys, i looked all over for an answer before posting this here , but no luck.
This is what´s happening, i have a kaiser tytn II which i had problems, was going extremely slow, i removed some apps that i had installed including tomtom and same thing, so i thought about the soft/hard reset, i did it, and now......its crazy, i can´t use the touch screen, example : i want to enter my pin code and when i press number 6, it only presses number 2. its like the whole thing is messed up and the theme is really ugly, grey color . I thought maybe i could install a new firmware with a nicer looking and might solve the issue, but i don´t know where to get it and how to install it. Could someone help me how on some tips please ?
Thank you so much in advance
Click to expand...
Click to collapse
Maybe if you start sharing what rom are U using My advice is that you definitely should flash another rom or reflash your stock rom to solve the issues you are experiencing. Please read the sticky of how to do it
you can reset it to factory settings (the ROM you last flashed that is) by this method:
press and hold the two upper hardware keys next to your call end and call button. While pressing and holding them do a soft reset. A white screen with blue text should come up. Press the green call button and wait for it to reach the screen after the percentage screen. Then press the green call button again and it will be like it first was out of the box (or when you flashed a ROM).
Kaiser tytn II
The soft reset that exactly what i did and that´s what screwed up my kaiser , i am going to re-flash it , i will look on how to do it and will have a try.
ok, one slight problem, i have a macbook all i find is for pc
luisdesigns said:
ok, one slight problem, i have a macbook all i find is for pc
Click to expand...
Click to collapse
You'll either have to create a partition and install windows on it or flash via sd card. Link here to get you started:
http://forum.xda-developers.com/showthread.php?t=433835
thank you so much, i will try it this evening from my pc hope it fixes the issue. Will let you know