Hello all,
since yesterday plugging in my headphones which were shipped with the device doesn't work anymore. Usually i see the headphone icon on the titlebar but now i dont. Also applications requiring headphones (e.g. FM-Radio) tell me to plug them in although they are already plugged. Soft-Reset didn't work neither. Anybody else having this issue or even solved it?
Regards,
Chris
PsychoChris said:
Hello all,
since yesterday plugging in my headphones which were shipped with the device doesn't work anymore. Usually i see the headphone icon on the titlebar but now i dont. Also applications requiring headphones (e.g. FM-Radio) tell me to plug them in although they are already plugged. Soft-Reset didn't work neither. Anybody else having this issue or even solved it?
Regards,
Chris
Click to expand...
Click to collapse
I am right now in the same situation. Do not know what happened. The phone was stuck (hung up), and I had to reboot. (i recently flashed on bepe 0.94 - but now reflashing).
Well - will now flash to bepe 0.95 - hope it will help...
in case not:
PLEASE HELP
---
so: did a re flash and still the headphones do not work =( open for all help!!!
In addition: when I softreset with the headphones attached: the diamond stays on the red green blue white display, telling:
Diam100 MFG 64 M
SPL-1.40.OliNex
MicroP-Diam (LED) v11
PSOC-Diam STAGE-PVT c0x30
Serial
That happend never befor!
Same Here. I also did a hard-reset with no result.
PsychoChris said:
Hello all,
since yesterday plugging in my headphones which were shipped with the device doesn't work anymore. Usually i see the headphone icon on the titlebar but now i dont. Also applications requiring headphones (e.g. FM-Radio) tell me to plug them in although they are already plugged. Soft-Reset didn't work neither. Anybody else having this issue or even solved it?
Regards,
Chris
Click to expand...
Click to collapse
Hi,
Did any of you found a solution?
Regards,
David
Hi again!
i've done it!
How? Go to Config/Erase (or delete) memory. This will reset your machine to default values and you will lose everything so sync your contacts and backup all your stuff before.Then, upon second restart plug in your headphones and that's all! Headphones are detected again!
Hope this helps!
Regards,
David.
When I plug my headphones in, they work, but I always hear a hiss in the background and I need to put the volume down to ~6%. Otherwise I would become deaf. Does any one have an idea how to fix this?
Edit: Rom: 1.37.407.2 GER
Guys, first post here xda forum with good news!
I've been searching for more than 6 months trying to found some solutions for this problem without erasing the flash memory, because I had so many applications and data that I didnt wanted to re-install them.
I did not found anywhere.
Using PHM Registry Editor, I was able to change the value for HKLM/System/State/Hardware/Headset from 0 to 1 once or twice and then I did a soft reset with the headset plugged in.
BINGO! It was recognized once again! And right now it is recognized every time a plug it in.
Well, it worked for me without erasing the memory. I hope this helps all Diamond owners with the same problem.
Rodolfo - Brazil
Related
My Tilt began having issues just the other day. The screen would periodically fade out and go white. I would soft reset and the screen would remain white. I was able to get into bootloader. Now i get no display and a green light on the ear piece is all i have.
Anyone have any clue if it's possible to fix this. I just got the phone on Friday and did Hard Spl by Sunday i was experiencing issues.
Any help or ideas would be great.
have you tried pulling the battery out for 10 minutes and letting the phone totally discharge?
i am trying that right now
still the same response. the device will not boot up
my first kaiser was dmaaged by myself. at night i wanted to reset the device. but the hole ist not like the hermes left of the usb jack its right of it so i didnt saw and didnt felt it and pushed my stick into the usb jack. at the hermes the usb jack was a board but in the kaiser the connectors are metal sticks with plasics around.
after pushin the stick into the jack the connectors were pushed down. at the next day the device had low battery cause the power adapter couldnt load the battery...
i phoned HTC and they couldn't offer any ideas aside from brining the device back.
when i plug in the device its recognized as a "data device" but i canot find drivers to enable activesync to address it. i feel like it's possible to flash it without activesync is this possible??
can't you just return it?
k_otix99 said:
i phoned HTC and they couldn't offer any ideas aside from brining the device back.
when i plug in the device its recognized as a "data device" but i canot find drivers to enable activesync to address it. i feel like it's possible to flash it without activesync is this possible??
Click to expand...
Click to collapse
Yes just download the HTC_ROM only that i just posted in the Kaiser upgrading sticky and put your phone into bootloader mode and run the Custom RUU and it should flash just fine
austinsnyc said:
Yes just download the HTC_ROM only that i just posted in the Kaiser upgrading sticky and put your phone into bootloader mode and run the Custom RUU and it should flash just fine
Click to expand...
Click to collapse
i cant tell if the device will go into bootloader. it will not light up totally black screen. I flashed the ATT rom you posted before it totally died hoping that it would reset the issue if it was software based. it didnt fix the issue though.
jallenclark said:
can't you just return it?
Click to expand...
Click to collapse
I plan on it but i hoped to be able to fix the issue myself. I have been able to fix my hermes in the past with the help of the XDA community.
Hi there!
Anybody an idea how to solve this Problem (by myself):
First my Diamond stuck at the Bootscreen, where Rom-Version, Radio-Version etc. is shown- doesn't do anything for ages... then left alone at this screen,
and after work it was off and doesn't respond.
What I did:
I Pulled the Battery out of my Diamond, connect to AC 4 charging and insert Battery again, tired evrything from replace battery after 20mins, HR, SR, USB-Trigger-Mode - NOTHING HELPED still NO RESPOND
Also on AC the LED's don't work...
Anybody same problem? Or any Idea?
I'm not very happy about losing all data and sent my HTC to Repair
Maybe same Problem then here? But I didn't do a flash or installed any software/Tweaked system before.
-Daddyload2-
Hi,
I am new to the forum and I recently purchased a HTC TyTN 2 (Kaiser) and have a few issues which i hope that you all can help me resolve. There is no sound on the phone. The ringtones don't work and when I try to play music I hear nothing. The speaker is good since the speaker phone works. Please Help. Also when I take standard photos they do not save neither on the memory card nor the internal memory. It also reacts very slowly to stimulus i.e. programs take very long to load ets. I really need help. Thanks
ArvinSR said:
Hi,
I am new to the forum and I recently purchased a HTC TyTN 2 (Kaiser) and have a few issues which i hope that you all can help me resolve. There is no sound on the phone. The ringtones don't work and when I try to play music I hear nothing. The speaker is good since the speaker phone works. Please Help. Also when I take standard photos they do not save neither on the memory card nor the internal memory. It also reacts very slowly to stimulus i.e. programs take very long to load ets. I really need help. Thanks
Click to expand...
Click to collapse
Have you recently flashed your ROM? Any information like this would be useful...
If so, did you upgrade your radio at the same time - you are probably using the wrong one.
Ta
Dave
1. - What version of the TYTN II do you have?
2. - What ROM is installed?
3. - Was it NEW or USED when you bought it?
4. - Please post your BOOT SCREEN information here as well.
5. - Have you tried yet a SOFT / HARD RESET?
6. - Have you tried to reflash the device with the ORIGINAL SHIPPED ROM?
(Read the TYTN's Wiki to figure out what ROM and for BOOT INFORMATION and also how to perform a SOFT / HARD RESET)
Check as well your VOLUME SETTINGS (Speaker symbol at the top bar).
Hi,
Its the Kaiser (that's what I got from the Device Info). The ROM is new and I haven't flashed it. I ried both a hard and soft reset yet nothing. The speaker settings are fine and still nothing. I assume the device was new. I don't exactly know what the boot information is but these are the things that come up to the bottom of the screen when it starts up:
R 1.27.15.32
G 22.51.88.13H
D 2.02.00.00
hi sorry the last one is
D 3.02.00.00
Hey there i was hoping some one could help me out. I have 2 things
1.) The Battery Icon on the top bar does not update at all. It just shows a full charge no matter how much charge my phone has, When I plug it in it doesn't change to charging either. If I go to battery properties I then can see how much charge my phone has. Anyone encountered this?
2.)2 buttons on my key board are reversed. The 2 Fn Blue buttons "!" and "@" are reversed, how do I change those?
I am on rom version Stylez Black WM 6.1 Full v.3 Beta 2
http://forum.xda-developers.com/showthread.php?t=545821
and the last program I installed was S2U2 v2.04
http://forum.xda-developers.com/showthread.php?t=545821
Thanks for any and all help
Could be that you have the kaiser keyboard and not the Tilt.
Hmmmm, thats intresting
well my model # is kais100 and its HTC 8925.
is there still away to re-assign keys so I can fix this problem?
well if it's the problem that I think it is.
search + tilt keyboard problem = win!
ChumleyEX said:
well if it's the problem that I think it is.
search + tilt keyboard problem = win!
Click to expand...
Click to collapse
It is also addressed in the faqs on the first page of the rom. Why people throw their phone in to the fire with out even spending 5 min to read the faqs is still beyond me. I have flashed my phone well over a hundred times and I still read the entire first page of any new rom I am flashing, to see what I am getting into with my $500 phone.
As far as the taskbar icons go, could be a bad flash, could just be a phone hiccup, no one else has had that problem with the rom. Try a hard reset or reflash the rom.
Thanks for the fast responses! I totally missed the keyboard fix on the FAQ, I got everything else (including the Radio from the FAQ) but that slipped by me.
now I am still new at tweaking my phone so will a hard reset restore all my setting and I will have reinstall all my programs I downloaded?
Just Figured out a Hard Reset will Erase all my Data. So no one else has had this problem...hhmmmm... It has to be one of the programs I installed, Maybe if I uninstall them 1 at a time ...... anyone else got any Ideas?
hi guys,
i hope i can bring to life my breeze again. i flashed my device with the futureshock rom. all works fine but the simlock was inside the breeze. i read a lot about sim unlock but have had no success. some day a guy told me that he want to try to unlock it. he flash a hsdpl (i don't know which one) and after this the brezze don't want to boot again. no tricolor (push on/off with camera buttom). my activesync got no connection. my device manager can not indicate the breeze when i conect it with the usb cable.
do i have a chance to get runnig it again?
thanks a lot
stagger
has anybody an idea, or suggestion? or is it damaged? unfortunatelly i dont know which version of spl he has install.
thanks
Stagger467 said:
has anybody an idea, or suggestion? or is it damaged? unfortunatelly i dont know which version of spl he has install.
thanks
Click to expand...
Click to collapse
Sounds like a death battery to me...
Try charging for one hour.., Then try to turn it on..
I don't think it does mathers if your phone is locked...,
Let me know the result
it charged my battery over 2h. nothing ....i can not turn on my breeze. the first minute i got a red charging light. like everything is ok.
i got no connection with my xp pc and active sync. the device manager can not detect the breeze. so i can not install any other boot program
any other ideas?
thanks
I had the same problem, it was hardware related though.
There are two little metal contacts that ground the battery cover, well one of them slipped though a little and was shorting pins on the motherboard. So fortunately nothing blew and it just was not turned on.
So obviously there is some form of protection from shorts that it will not power on.
Anyway check if it will turn on if only the motherboard, LCD and battery is plugged, without housing or anything else. Be sure that the back of the battery does not get into contact with the MB if you are going to try.
Good luck, hope you get it fixed..