8925 Wants to Format My Storage Card - Tilt, TyTN II, MDA Vario III General

I have just recently went from a 8525 to a 8925. I used a 4GB Microsd CARD IN THE 8525 and I did nothing to use it with my 8925. All my music files and installation files were on this card. I have been play my music with no problem and have had no problem with this card after numerous soft resets.
This morning I decided to us WM6 A2DPTweaker. All I did was change UseJointStereo from a 0 to a 1 and then did a soft reset. After the soft reset I got the following Storage Card: Do you want to format this storage card to make it readable? This will permanently erase any files on the card. YES NO
Of course with all my files on the card I said no. Of course this makes the card inaccessible. I think I am screwed and the only way I will be able to use the card again is to format it. The worst part is that all my file backups are at work and I won't be back to work until Monday.
Is there anything that can be done or is the card lost until I format it? Worst case I will read and backup the card at work Monday and then let the phone format the card.

MicroRacer said:
I have just recently went from a 8525 to a 8925. I used a 4GB Microsd CARD IN THE 8525 and I did nothing to use it with my 8925. All my music files and installation files were on this card. I have been play my music with no problem and have had no problem with this card after numerous soft resets.
This morning I decided to us WM6 A2DPTweaker. All I did was change UseJointStereo from a 0 to a 1 and then did a soft reset. After the soft reset I got the following Storage Card: Do you want to format this storage card to make it readable? This will permanently erase any files on the card. YES NO
Of course with all my files on the card I said no. Of course this makes the card inaccessible. I think I am screwed and the only way I will be able to use the card again is to format it. The worst part is that all my file backups are at work and I won't be back to work until Monday.
Is there anything that can be done or is the card lost until I format it? Worst case I will read and backup the card at work Monday and then let the phone format the card.
Click to expand...
Click to collapse
do you have a external card reader? if so use that to read the card using your pc and copy all files to pc. Than format card and reload files to the card from pc. Other than that i think waiting till monday is the only other option unless someone else has a better idea ..
Happy thanksgiving.

Related

Storage Card not showing up

Hi guys
Had problems yesterday with my Storage Card being renamed to Storage Card2 etc and could not figure out what was up. Renamed it back as described in various places (By deleting the Storage Card folder created and resetting).
Today however the Storage Card is not showing up at all. Have tried the following:
- Remove storage card, copy contents onto PC using card reader and formatting. Copy contents back and put in phone. -> No luck.
- Hard reset. -> No luck.
Never had any other roms than the standard. Have not upgraded to 6.1 yet.
Could the contents stop it from showing up?
Cheers
Louis
One thing i could think of is a corrupt file.
Try formatting it again (with all your files backed up in your PC) and just insert the card with nothing on it. If it shows up and your phone reads it, a good bet that one or more of your files from your backup is corrupt and the phone is unable to read the card.
yes i suppose that is a logical step to do. lets hope it is. but luckily it is still under warranty if it is hardware...
Reformated the card (FAT32 is this right?) and loaded into HTC TyTN II without restoring files onto it (i.e. completely blank).
Still not showing up...
Any ideas?
ur storage card reader might have become faulty. i would recommend a warranty exchange for ur device.
Installing WM6.1 sorted this out...
I have the exact same problem as you had.. But I already have WM 6.1 and the storage card still doesn't show up..
Tried formating, etc and still nothing.. I can see all the contents if i use a card reader on my PC, but once I insert de card on my kaiser it doesn't show up..
Any ideas?
Have you hard reset? It didn't help me until I installed the WM6.1. Otherwise is it still under warranty. I was actually on the way to take mine in when I installed 6.1. Actually I should have taken it in as I have a scratch on my screen and I suspect they would have replaced the phone...
This problem usually happens if you are using a third party file explorer like Resco etc. and make non visible areas such as your ROM visible.
It then treats the new area as Storage card and the SD card becomes Storage card2.
Just check if you have any other memory areas set as viewable and undo this.
My storage card completely disapeared but came back when I installed WM6.1. Didn't use 3rd party explorers etc. But this might be Baretto's problem.
This problem also occurs when running Card Export II. The Storage Card is renamed as Storage Card2. The only solution is to remove the card and re-insert it.
This solved the problem for me.
Regards,
MAC
The problem I originally described here was the Storage Card disappearing completely. Not renamed etc. I.e. there is no Storage Card2. Baretto may have a similar problem to mine or his may also just be renamed.
Yes, I have the exact same prob as lrossouw did. My mem card wasn't renamed. It just disapeared..
I've already did hard-reset, and I don't use any third party explorer.. I already formated the card.
My only hope is to flash another rom.
I'm using the official HTC 6.1 portuguese rom and i'de like to stick with this rom..
If I was the only one with this problem, I would think it would be a hardware prob, but lrossouw solved his prob by flashing another ROM, so I'm hoping there will be another solution..
EDIT: Just tried to flash another ROM and still no success.. Still Can't find my mem card
I got one better for you. I had to wind up formatting mine because of this. Here's the deal. I go to open up my storage card and the folder is there but none of my files are showing. Then I go to the memory to check the space available and it was still showing that I had half of the card full. So I popped out the card and plugged it into my computer with the same results, nothing. So then I soft reset twice, nothing. I pim backed up my phone and hard reset, nothing. The pim back up was on my card but nothing else. Then I made another my documents folder and for a split second it showed the files that use to be in the old my documents. So seeing that all was lost I formatted my card and I haven't had any problems yet. I started a thread about this but no one responded so I assumed no one else had this problem.
P.S. I have an 8gig sdhc card
cragordon said:
I started a thread about this but no one responded so I assumed no one else had this problem.
Click to expand...
Click to collapse
No one has answered you, because there are already other threads about that problem.. Search and you will find them..
This thread is not about empty mem cards.. It's about the device not recognizing the card, so pls refer to other threads..
Thanks
Baretto is it possible to reflash it with the wm6.1 rom? It might fix it.
lrossouw said:
Hi guys
Had problems yesterday with my Storage Card being renamed to Storage Card2 etc and could not figure out what was up. Renamed it back as described in various places (By deleting the Storage Card folder created and resetting).
Today however the Storage Card is not showing up at all. Have tried the following:
- Remove storage card, copy contents onto PC using card reader and formatting. Copy contents back and put in phone. -> No luck.
- Hard reset. -> No luck.
Never had any other roms than the standard. Have not upgraded to 6.1 yet.
Could the contents stop it from showing up?
Cheers
Louis
Click to expand...
Click to collapse
LOL,
Guy this is the easiest fix ever.
All you do is delete the folder that says "Storage Card" then remove & reinsert the SD card. SD 2 will disappear & be corrected upon reinsertion.
This issue happens because of the Unload delay & sometimes because of SD Power management issues.
Always best to make sure SD Card Power Management is DISABLED.
GSLEON3 said:
LOL,
Guy this is the easiest fix ever.
All you do is delete the folder that says "Storage Card" then remove & reinsert the SD card. SD 2 will disappear & be corrected upon reinsertion.
This issue happens because of the Unload delay & sometimes because of SD Power management issues.
Always best to make sure SD Card Power Management is DISABLED.
Click to expand...
Click to collapse
As I & Baretto posted before (read the bit you quoted) there is no *spoon* (edit:storage card folder). It is not there. Can't delete it if it is not there. There is no Storage Card 1,2 or any number either. The storage card is not showing up anywhere and not as SD2 either.
Mine was fixed by upgrading to wm6.1. Baretto is on wm6.1 already.
@ lrossouw
I already tried to reflash it with HTC original 6.1 rom and other 6.1 cooked roms and nothing..
I'm getting desperate..
I'm thinking about sending it to the warranty, but I'm predicting 1 or 2 months without my Kaiser if I do so
@ GSLEON3
What do you mean by "SD Power management issues"? As lrossouw said, I don't have the SD card rename problem, but maybe my Kaiser ins't recognizing the SD card because of something related with power mangement..
It might be power related. My phone was on very very low battery power just before this happened for me. In fact had to reset itself a couple of time due to low battery. The next day the storage card was gone.
Anythign similar for you Baretto?

Help Upgrading my Micro SDHC Card

I know there are other posts on this, but, I still need some concise advise.
I am replacing my 2GB card with an 8GB Card and I am struggling with how to backup and restore the data to the new card.
Newbie Steps taken so far:
1. Downloaded Memmaid to format the 8GB Card but it was already formatted to fat32. Free trial version so no lost money.
2. Attempted to get sprite software installed and it doesn't install properly (used the "free" HTC version that they sent as a remedy).
3. Downloaded the latest SPB Backup software and backed up the data on the storage card to the 2GB storage card and to my c drive on the PC.
4. Copied the backup file to the new 8GB card and tried to restore it but it doesn't seem to be restoring it to the 8GB card. I don't think the software will restore the file from the PC to the phone card. Stuck here.
Clarification: The SPB software seems to go through the motion of restoring all the files but they are not showing up on the 8GB Card.
Any advice would be appreciated.
Thanks
powergator said:
I know there are other posts on this, but, I still need some concise advise.
I am replacing my 2GB card with an 8GB Card and I am struggling with how to backup and restore the data to the new card.
Newbie Steps taken so far:
1. Downloaded Memmaid to format the 8GB Card but it was already formatted to fat32. Free trial version so no lost money.
2. Attempted to get sprite software installed and it doesn't install properly (used the "free" HTC version that they sent as a remedy).
3. Downloaded the latest SPB Backup software and backed up the data on the storage card to the 2GB storage card and to my c drive on the PC.
4. Copied the backup file to the new 8GB card and tried to restore it but it doesn't seem to be restoring it to the 8GB card. I don't think the software will restore the file from the PC to the phone card. Stuck here.
Clarification: The SPB software seems to go through the motion of restoring all the files but they are not showing up on the 8GB Card.
Any advice would be appreciated.
Thanks
Click to expand...
Click to collapse
Using backup programs to replace cards is toooo much hustle. I hope you own a card reader. Just copy all the files from your 2gb card to your computer using a card reader and then copy them back to your 8gb card. Simple as that
I don't understand your point...
You just bought a new microSD card and want to transfer the files from the old one to the new one?
If yes, there's no need to do backups and whatever... Just put the old card in your PC reader, copy everything to a folder, pur new card in the PC, copy everything from that folder and you're done.
The card isn't "linked" to the phone in any way - you can remove it and swap it with an other one at any time. No phone backup or whatever to do, removing the card doesn't affect what's on the phone itself (everything but the "Storage Card" folder)...
Thanks
I used the active sync explorer to copy all the files up to my PC off the 2GB and I noticed it said something about converting them and then I got an error about 1 file (index?) file so I started to assume you couldn't just copy it like that.
But, I will simply do what you both suggested and copy off the 2GB and paste to the 8GB card.
Thanks.
8GB Class 6 Card
By the way, New Egg sold me an Adata ,Class 6, 8GB card for $29.99 plus 3.95 eggsaver shipping.
Pretty good deal.
What about programs stored on the card
kilrah said:
I don't understand your point...
You just bought a new microSD card and want to transfer the files from the old one to the new one?
If yes, there's no need to do backups and whatever... Just put the old card in your PC reader, copy everything to a folder, pur new card in the PC, copy everything from that folder and you're done.
The card isn't "linked" to the phone in any way - you can remove it and swap it with an other one at any time. No phone backup or whatever to do, removing the card doesn't affect what's on the phone itself (everything but the "Storage Card" folder)...
Click to expand...
Click to collapse
I have been wanting to do this same thing too, but I am wondering what needs to be done with the programs that are installed, and run from the card? Do they need to be removed, and re-installed?
As long as everything is in the same place on the new SD as it was on the old SD, all your programs will work
Some comments:
Some PC readers have a problem reading > 2GB
Copying LARGE files/data through active sync may fail
In case your card reader doesn't fail your fine if it fails to read do the follwing:
Download Softick Card Export II, trail is good for 15 days.
Install Card Export on the DEVICE
Start Card Export, your SD card will be a USB removable drive in Windows
Copy all files to a folder on your PC
Stop USB
Stop softick
Power down phone (!)
Remove SD
Insert new SD and power up phone (simply ignore warnings from programs which may have been installed there and don't panic if icons don't show up) SD should come up with the same name "Storage Card"
Start Softick
Copy files back
Done
Windows Backup is the way to do it.
powergator said:
I am replacing my 2GB card with an 8GB Card and I am struggling with how to backup and restore the data to the new card.
Click to expand...
Click to collapse
Windows XP includes it's own backup utility which can do this easily and quickly (and keep a simple archived copy on your HDD in case the card/phone looses data - this has happened to me and others here), just put your memory card in its USB reader. There's no need to use third party software for simple stuff like this. I impagine Vista would also have a similar backup utility but I'm unfamiliar with that OS.

memory card not being read

i have an att tilt and twice now it has stopped reading the files on my memory card and wont let me use any of the programs or access files on the storage card. it knows there is a storage card in the phone and shows that memory has been used on it from the files that i can not get to. i think this has happened twice now after hard resetting my phone; however i have tried not doing so with the storage card in the phone after the first time. the only way i was able to correct this was by reformatting the storage card but that meant i lost all the files, i have tried using rescuepro deluxe because thats what sandisk would have told me to use to recover files off a damage harddrive but that didnt work at all as it wouldnt look toward the storage card when i put it into my computer. i am wondering if there is a way to get my phone to recognize the files on the storage card again, i cant view anything when i go to file explorer-->storage card....i really dont want to have to reformat the storage card again because that means i lose all my files and stuff if anyone could help i would greatly appreciate it.
thanks
KISSlover101

Problem with Micro sd card

I have AT&T Tilt with Sakajati's HyperDragon IV Windows Mobile 6.1 OS ROM, I also have this 8 GB micro SD card, which has around 3.5 GB of data, but for some reason I am not able to write on it any more. When ever I tried to format it I get this message which says " The card is write protected" I don't remember putting any password or anything. I can read data from that card on any computer or phone, but can write anymore data on the card. I can't delete anything from the card either.
Can someone suggest what could be wrong with the card and how can I unlock it?
I have tried low level format also, the format completes without any error, but when see in file explorer all the files are still there. If I try to format from SD formatter, I get error "The memory card is write protected", windows format doesn't give any error, just runs and in the end says "Windows can't comeplte the format". Card is working file and have no problem in reading the data it has, just can't write new one ot delete old one.
This is very weird problem... any help/comment is good.
Not sure if this will help....
I've had very similar issues over time...
Because of high TomTom & Music Use.
Both are loaded and work off my SD Card (6 GB worth)
What I finally found that worked for me, was to get a 2nd card and backing up my SD card to my Desktop PC, so later I could transfer to the 2nd SD Card when needed.
Then I do a Complete Format [Full FAT32 Format] of the old SD Card, via the Mini SD adapter on my Desktop PC.
I found that formating within the phone doesn't always work...
If this is not the case I can think of 2 other reasons for potential problems..
~Some ROM's require the removal of SIM & SD Cards when installing?
~If you were using an adapter formating the SD Card and it was not set to write mode?
Best of Luck!
JAC,
Thanks for your reply, but I have already tried FAT32 formatting using micro sd card, but as I said before, but it errored out.I even tried low level format, but didn't work. There is no locking swithc or anythign in micro SD card, not sure how the data can be locked. If it was ecrypted I was not able to read data on other devices. So what happened? Any help!!!
Like everything else, sometimes things just wear out, break or are just low quality to begin with. If you can read it on other devices, then transfer it and get a new card.
There is also a trick used by nefarious suppliers that takes a 4GB (or any size chip) and format it in a way that it appears as a larger chip. Then when you go to write to it the whole thing goes crazy.
This is why I recommend using reputable resellers and buying good quality Name Brand Chips, Like Sandisk or Kingston.

[Q] is my SD card really dead?

Hi guys, I have a 64GB SanDisk Ultra MicroSD class 10 card. I use it on my Samsung Galaxy s3. Couple of days ago I went to my friend and ask him to give me some movies. He was sending it via data cable but we got frustrated and we had to go somewhere so in the middle of transferring data he unplugged the cable and now my SDcard isn't working anymore. I mean can it be damaged just because we unplugged it in the middle of transferring? I've done it so many times before but it wasn't really a problem. Anyway I'll try to explain what I did with my card since then and what was it's response.
1. The data in the card is intact, I've backed it up as well and when I put my card into my phone it works perfectly. (btw the card was in FAT32 format)
2. I can copy stuff into my card but when I put into my phone it wouldn't show and when I put it back on card reader again the file disappears.
3. I can delete stuff from my card then I take it out and put it back again and the file that I've just deleted comes back.
4. I've tried formatting it but it would give me an error.
5. I've used Easeus partition manager but it would give me an error as well.
6. Then I've used the software I've used when I first formatted the card to FAT32. Guiformat. It would format my card normally but when I go into my card all the files are there.
7. I've tried using commands like "chkdsk d:/r or chkdsk d:/f etc but after like 44% it would say certain files are invalid and can't continue the do the checkdisk command (the file it shows was the files I tried to get from my friend)
8. I've tried so many other stuffs but none of them seems to able to format my card.
now my question to you guys is my card really dead? can it be dead just for interrupting file transfer? is there any way to get my card back to normal? anyway I can format my card? I'd really appreciate it if any of you guys can help. Thanks

Categories

Resources