Related
I've tried it all!! The wifi will not turn on at all. In the settings tab and under connection, the comm manager wifi switch pressed will cause the wait cursor to come up, but after the process it wont turn to on. Can anyone please help me.
how do u know its not on? cant detect wifi?
Is the Wifi antenna icon comes up on the top menu ?
Baronic said:
how do u know its not on? cant detect wifi?
Click to expand...
Click to collapse
Not Sure What you mean.
1. Go to comm manager
2. Hit WiFI and the wait icon starts (should be a quick spin and its on, but the icon goes on for a while).
3. Switch instead of turning green animates back to off.
I have not loaded anything other then SKtools that could change the registry or system in anyway (no other tweaks except Schapp's)
I looked all over this forum and found tricks for other HTC phones, tried one or two, but they are made for other phones. I looked over the GPS and in Google Earth disabled it. I have also done a hard reset. I also get a device.exe error.
Please somebody help us. My diamond's wi-fi doesn't work. I try a lot of tfink. I try a lot of time hard reset. And several times upgrade diffrent roms. Now i use 1.37.401 europa rom. But my diamond's wi-fi still not work.
same here.. any news?...
Juggy said:
same here.. any news?...
Click to expand...
Click to collapse
Did you set your battery for best performance in the wifi configuration? If not, try it and see if it works then
Yes.. the wifi is not working ,... the same for the gps...
Mines the same. Done a soft reset - nothing. Done a hard reset and all seems fine for the mo.
Got my phone from orange.
hard reset u mean erase all and start like new?
with this hard reset.. the same problem... any other option??
No Wify
I have the same problem. No wify. A "device.exe" error appear. Is there any solution?
WLAN Hardware
minlu said:
I have the same problem. No wify. A "device.exe" error appear. Is there any solution?
Click to expand...
Click to collapse
I have the same problem with german htc touch diamond and several roms.
I think the hardware has an error. Bull**** !!!
Has anyone an other idea?
I had this issue with my S710, if you turned the wifi on it would flip to on for a second before going back to off - only happened if I has it hooked up to a pc via usb. Not sure if its the same with the diamond?
I couldn't enable Wifi properly on my last phone despite hard and soft resets. After trying lots of times, I gave up and sent the phone back to Orange. I currently have a Diamond Touch that has no problems enabling, but can't connect to my router using WPA2.
I think I have the solution for wifi / wlan problems on diamond
Over one week i try to start my wifi (100 hardresets, 5 new ROMs) and then i believe it is an hardware error.
Under ...\connection\wifi\ was not the tab "wireless", only the tab "networkcards"
My last try was the solution:
1. In my HTC Kaiser is the same wifi-hardware
2. I export the registrykey "HKEY_LOCAL_MACHINE\Comm\TNETW12511" from the kaiser to a .reg-file
3. I delete this registrykey on the diamond and import the .reg-file from the kaiser
4. Before I can start wifi i make about 5 softresets and try to start
5. But the start was only successful when I make first a connection to the pc with ActiveSync and then a softreset
This is my solution, please answer me when it works for you too
One problem is still there: after an usb connection wifi will not turn on. I must make a softreset but thats no problem for me.
Its the same what "huwwatkins" describe at #13 with the S710
Here is my regfile from kaiser
zmob123 said:
Not Sure What you mean.
1. Go to comm manager
2. Hit WiFI and the wait icon starts (should be a quick spin and its on, but the icon goes on for a while).
3. Switch instead of turning green animates back to off.
I have not loaded anything other then SKtools that could change the registry or system in anyway (no other tweaks except Schapp's)
I looked all over this forum and found tricks for other HTC phones, tried one or two, but they are made for other phones. I looked over the GPS and in Google Earth disabled it. I have also done a hard reset. I also get a device.exe error.
Click to expand...
Click to collapse
I have heard of this... The wifi does not go on but the bluetooth does. I was told it was a bad chip.
same here, called retailer today. told me HTC is working on a fix. will be available in about two weeks. let ya know
Same problem here..
I have the same problem. Tried everything - no luck. Thinking of turning it in for repair - should I flash the original SPL/ROM for warranty reasons or can they tell it's been flashed anyway ?
wifi working fine on mine
i have no problems at all
huwwatkins said:
I had this issue with my S710, if you turned the wifi on it would flip to on for a second before going back to off - only happened if I has it hooked up to a pc via usb. Not sure if its the same with the diamond?
Click to expand...
Click to collapse
Yes my diamond has this also only when plugged with USB.
Grtzzz
Hi, i have recently installed ms active sync 4.5. However my tytn ii will not establish a connection with my pc. It charges just fine but does not connect. I have searched all over but did not find a solution to my problem. i was wondering if it mightbe the cable i got with my device when i purchased it. it is a usb to "mini usb" like the motorolas and nokia 6300 use. Could this be my problem?
I doubt it's because of the cable (though could be). Try unchecking start>settings>connections>usb to pc.
I have the same problem, and have tried connecting with and without advanced network functionality.
activesync does not respond at all, even when trying to connect from activesync on my pc.
I have the same problem, charging o.k., but USB connecting not work
Before I had same problem. The reason was I have installed some 3rd party program what somehow blocked the sync.
I have un-installed this program but it couldn't help because the registry setting was modified by this software. So finally I ended up with a hard reset and reinstall everything. After that the sync just work fine again.
Sigh, i thought it might come to that.
hard reset 2x, no effect
flah rom from SD card, Duty V1 Daimond....no effect
flah rom from SD card, L26 V6 Daimond.... I have the same problem, charging ok, USB data connecting not work...
Well, hard reset complete to no effect. So frustrating!!!! I have been troubleshooting for ages and have nothing to show for it. Surely someone on this forum has solved this problen before.
Hi
I had the same problem following a rebuild of my laptop.
Problem traced to my firewall which had blocked the connection.
Once rule changed to allow no further problems.
Hi colinm, what did you do exactly? It may help me out of this situation.
Doesn't anyone know anything about this?
Yeah i had it get the latest update for active sync from windows its a latest driver pack goto teh windows home and look on there it sorted my one out
what version is it? i have 4.5 right now.
If you could provide a direct link that would be great.
I was trying in 2 different PC ( Vista, Win XP), but the same problem, cable is ok....
I would really like to know what the more experienced members think about this but no-one really seems to want to reply. also i would like to know is the usb data cable plug identical to the htc original handsfree plug which is an exact fit. as i mentioned before my data cable is more like a mini usb, like the motorolas use. it fits (not perfectly like the handsfree), charges but there is no recognition between the device and the pc (xpSP2 running activesync 4.5 which came with the device).
Please help, i may seem to be a noob but i have tried available advice and troubleshooting has become repetitive.
My Mobile Device Center from my Tilt to Windows Vista stopped working a few weeks ago. Tried everything to no avail.
there was one thing that i couldn't do while troubleshooting.
"Do the following:
Disconnect the device.
Open Network Connections in Control Panel on the PC.
Note If your Control Panel is set to Category View, open Network and Internet Connections, and then open Network Connections
Right-click the local area connection created by ActiveSync, and click Properties. In the Connect using box, Windows Mobile-based device is displayed.
In This connection uses the following items, select every check box (to select all protocols).
Reconnect the device."
i cannot see the network icon active sync has created. which leads me to believe that this might be the problem. does anyone know how to fix this?
will updating to SP3 do anything, gonna try will let you know.
link with answer:
http://forum.xda-developers.com/showthread.php?t=362679
thanks champ worked a treat. eventually.
I recently got a new PC with Vista Ultimat. Synchronizing the phone has been a nitemare.
If i hook the phone up, the computer beeps in recognition; I can even browse files on the phone sometimes. But ActiveSynch says I'm disconnected, the phone says I'm connected.
I find the only way I can get the synch to happen is to install MS Mobile Device Center 6.1 . I have the phone hooked up during the install, and during the install the phone is recognized and it will synch.
Any ideas on improving this. I"m surprised I didn't find this and a solution already out here (maybe using wrong search terms.).
Thanks
Try the info in here.
http://forum.xda-developers.com/showthread.php?t=359513
Thansk for pointing that out, but it didn't help.
And, interestingly, even reinstalling WMDC doesn't always work either.
What rom are you using? I had problems synching when I flashed Garmin dk2 rom. But all others work fine.
Try this, it worked for me.
Go to start<<settings<<connections tab. Then select the USB to PC icon. Uncheck enable advanced network functionality. Restart PPC and then try to re-sync.
Hi,
I am getting a bit frustrated over this.
When I connect my X1 to my Vista x86 nothing happens (well the USB task tray icon show for about a second and vanishes again).
When I disable the "advanced option" in the USB/PC connection settings in the X1 I at least get a USB connection with something identified as "PocketPC USB Sync".
Any idea why this is happening and how I can get a real connection with the win mobile device center?
Thanks for helping me out!
Cheers,
Tillman
maybe give this a try:
http://modernnomads.info/wiki/index.php?page=Windows+Mobile+Device+Center+Troubleshooting
I've once had the issues of not able to connect my Windows Mobile device with vista too, and it can get very annoying.. good luck with it.
You might want to try and disable the firewall and then connect the device. I had this problem with Sygate Personal Firewall (sygate was bought by symantec and personal firewall is now terminated and no longer available)
Thanks for the quick response guys!
I already tried disabling the firewall (nod32) but that did not help.
Also checked all services - everything is peachy in that department.
But still - no connection.
When I switch back to "legacy mode" (disabling the advanced option in usb/pc settings on the device) then the device will tell me that I need to install active sync 4.5 or higher and wmdc still does not connect.
This is really strange...and annoying and the same time.
Any more ideas or any way for me to debug what's going on?
Thanks for you help!
Have you intalled "Windows Mobile Device Center 6.1" on your Vista-PC?
The MobileDeviceCenter should be standard without the need to install...
At my Vista Home the X1 had no problems to connect.
Open the Mobile Device Center and delete all old connections of other PPC. Then start your PC again, Softreset your X1 and try again. This should help. I had the problems too, when first connecting, because he didn't liked my G900-connection which was first
After this I too could install my G900 again and no problems since yet (2 weeks).
pf said:
The MobileDeviceCenter should be standard without the need to install...
At my Vista Home the X1 had no problems to connect.
Open the Mobile Device Center and delete all old connections of other PPC. Then start your PC again, Softreset your X1 and try again. This should help. I had the problems too, when first connecting, because he didn't liked my G900-connection which was first
After this I too could install my G900 again and no problems since yet (2 weeks).
Click to expand...
Click to collapse
Well sometimes the Mobile Device center could stuff up or not work due to some issues such as installation of Mobile Device Center 6.1 went wrong. I have experienced that I think I didn't follow the procedures correctly and things just wouldn't work. Eventually I had to do some uninstall and reinstall many times to finally get it working.
When I first plugged mine it it installed some drivers but didn't show up in the Mobile Device Center; unplugging and replugging in caused it to work...did you change settings in between plugging in for the second time?
What I have tried so far (and nothing worked):
Uninstall / reinstall WMDC
Uninstall / reinstall Win Mobile Remote Adapter (yes, this does show up once I am connected with "advanced" USB mode)
Uninstall / reinstall "PocketPC USB Sync" (shows when X1 is set to legacy USB mode)
When in "advanced" mode I can also see a new LAN connection showing up in network overview.
The same X1 on a different Vista 32bit right next to this one will connect just fine. So it's definitely about a driver or config thing with this Vista.
This is driving me...well you know what.
btw, you did try restarting your comp when performing some of those steps, and you did try different USB ports right?
I know that you had to ask.
Yes I did. I have rebooted the system several times in between all those reinstallation tasks.
By the way. When I am in USB legacy mode and reconnect the USB cable then the X1 will show a messagebox telling me that it's connecting with the host and that the user credentials / user account (having to translate here) are correct.
But still NO connection visible in WMDC.
I had the same problem with my X1. I assumed that because my HTC Diamond worked the X1 would as well.
I finally installed WMDC from the SE install cd, and bingo!! al good. Hope it works for you...
Wow!
Even though it does not work (yet) it's showing some new signs.
Installing WMDC from SE disc fails at 99% progress and then rolls back.
There's gotta be some installation error log this, right?
Thanks for coming up with that suggestion. Really, I should try installing from vendor CDs more often instead of hunting down the latest version on the net.
TillmanZ said:
Wow!
Even though it does not work (yet) it's showing some new signs.
Installing WMDC from SE disc fails at 99% progress and then rolls back.
There's gotta be some installation error log this, right?
Thanks for coming up with that suggestion. Really, I should try installing from vendor CDs more often instead of hunting down the latest version on the net.
Click to expand...
Click to collapse
maybe give event viewer a try and check under Windows Logs (not sure if it will be application or system tho)
just in case you aren't sure, in vista either type in "Event Viewer" in the start menu search bar, or type in "eventvwr"
Don't you just like vista?
That helped (to install SE's WMDC). The issue was that my HTC Universal was still connected to one USB port (for testing purposes since that device is not recognized either).
As soon as I unplugged the HTC I was able to complete the WMDC installation.
Unfortunately though it still won't connect to my X1.
Any more ideas?
what is your settings in Windows Mobile Device Center connection Settings?
Well here is my settings that is working with my x1:
Allow USB connections checked
Allow connections to "DMA"
This computer is connected to "Automatic" (this shouldn't matter)
Allow automatic device authentication checked
Allow data connection on device when connected to PC (this shouldn't matter either)
also, while this link was in the first link that I have posted for trouble shooting, just want to make sure you actually tried The offical Windows Mobile Device Center troubleshooting guide?
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center-troubleshooting.mspx
namely these steps:
Quote"
If Windows Live OneCare is installed on your machine, it may be blocking the device connectivity. Please click here for the steps to configure Windows Live OneCare to allow the device to connect.
My device wasn’t connected during this installation.
While it is not a strict requirement that you have a device connected during the installation process of Windows Mobile Device Center, we highly recommend that you do.
"
I didn't have the DMA set (changed that now). Everything else already was like you described and it does not work.
This really freaks me out. I always hated my iTunes/iPhone connectivity but that honestly works much smoother. Of course I do understand that this behavior is non standard as I have experienced myself that the phone works with my other Vista machine but that does not really help me here.
Any update on this? I am having the same problem.
I'm having the _exact_ same problem too, but in Vista x64. I don't know why WMDC can be such a c**t sometimes, as I have never been able to 'sync' with my Media Center PC.
My only saving grace is that my laptop has Bluetooth, and syncing works great on it. I have never had success connecting the USB cable (with many options changed around of course) to either of these computers. Only Bluetooth syncing works for me...
Hopefully we can find the answer!
What USB cable are you using??? the one that came with Xperia??? Cos the one that came with my Xperia never worked out of the box, it could only charge...
I also got another extra cord which came in another box, that worked fine for both syncing and transferring data until today, now it says USB device not recognized, maybe I was trying the flash X1 with new ROM through SEUS, did the whole lower volume key and power button to get the 3 strips.
Now I am using the USB cable that came with my external HDD, that's currently working, hopefully it won't fail me.
so any ideas??? I don't want to keep changing cables...
Dear All,
I am now reading over the forums for about three days. But still I dont have a solution for my sync problem. The problem is that after I flashed my kaiser it won't connect to activesync. But the STRAINGE think is, that when I put it in bootloader the computer does regonize my kaiser, and I can flash another rom on it.
I also got a MDA touch and when I am connecting that one to my computer, everything workes fine. So the problem is not in the computer. What did i already tried:
- turned off the advance USB settings on the kaiser
- reinstalled my whole WINXP and try to connect
- reflash in VISTA and WINXP
- Put the original ROM back
- check if the repplog is in the Windows file
- Put the firewall off
- Googled on every thinkeble words
So i think that the problem is in te phone, because my touch is normaly connecting. The only thing my kaiser is doing now is when i put in on the computer is recharing.
Does sombody have the knowlegde of getting my kaiser back to sync? It will let me sleep a lot better!
Regards,
Gertjan
usually truing off the option (Enable faster data synchronization) fix the problem...
this is the first time time I read about such problem that was not fixed by all you did...
there are some other things, they may not work, but they're worth of a try:
1. try flashing different radio, not only ROM
2. try changing the USB port on your PC
3. did you try syncing with another PC?
I had a similar problem with one of my PCs, it used to sync with no problems, then it stopped! the other PC i have syncs with no problems
all I did is disable the option (Enable faster data synchronization) in USB to PC in the connections tab
I really hope you'll find a fix soon
Do you use Dashwire? I have to kill the Dashwire process to make sync work... Just wondering?
If I understand your post correctly, you have 2 active sync devices. Are they by any chance named the same? I had that problem with my HP 3955 which is nothing more than a universal remote now but I charge it with my computer and it connects to active sync. Anyways long story short I named my phone Ron_Mobile when I got it which is what my PDA is named and I had active sync problems.
Sorry didnt help
Fingerlickin said:
If I understand your post correctly, you have 2 active sync devices. Are they by any chance named the same? I had that problem with my HP 3955 which is nothing more than a universal remote now but I charge it with my computer and it connects to active sync. Anyways long story short I named my phone Ron_Mobile when I got it which is what my PDA is named and I had active sync problems.
Click to expand...
Click to collapse
Thank you for your reply regarding my problem, but I changed the name and reset my device. After that he is still recharging and not connecting.
No Succes
duke911 said:
usually truing off the option (Enable faster data synchronization) fix the problem...
this is the first time time I read about such problem that was not fixed by all you did...
there are some other things, they may not work, but they're worth of a try:
1. try flashing different radio, not only ROM
2. try changing the USB port on your PC
3. did you try syncing with another PC?
I had a similar problem with one of my PCs, it used to sync with no problems, then it stopped! the other PC i have syncs with no problems
all I did is disable the option (Enable faster data synchronization) in USB to PC in the connections tab
I really hope you'll find a fix soon
Click to expand...
Click to collapse
Thank you for your reply, i did all the things you suggested. And still nothing changed. I flashed a diffirent radio, changed the USB port and I alrady tried to sync with serveral other computers. The strainge thing was, that after a reflash of the ROM of Athene (that I use mostly) I suddenly get this problem, and before I didn't have this problem at all...
well hope that someone else can help me.
partly solved....
jorra said:
Do you use Dashwire? I have to kill the Dashwire process to make sync work... Just wondering?
Click to expand...
Click to collapse
Dashwire? didn't know the existing of this service, so i searched it up. This service is a very good alternative for the time that I dont have activesync to work.
you might want to reflash the rom. i had the same problem after using -G- series 4 for almost 3-5 months, all of a sudden activsync stop working for some odd reason. so i reflashed with the latest -g- rom and now everything works.
itzstevo said:
you might want to reflash the rom. i had the same problem after using -G- series 4 for almost 3-5 months, all of a sudden activsync stop working for some odd reason. so i reflashed with the latest -g- rom and now everything works.
Click to expand...
Click to collapse
I installed the latest Garmin but still no succes..
I had the same problem. It happened when I flashed one of g-roms on my vista laptop. what I did was uninstalled and then reinstalled wmdc because apparently what had happened is something messed up with the drivers that recognizes my phone. I also hardreset just for good measure. I hope that helps.
david2327 said:
I had the same problem. It happened when I flashed one of g-roms on my vista laptop. what I did was uninstalled and then reinstalled wmdc because apparently what had happened is something messed up with the drivers that recognizes my phone. I also hardreset just for good measure. I hope that helps.
Click to expand...
Click to collapse
Nope didnt work, also tried on other computers and reflashed couple of times...
Same problem
Yes, I had the same problem as you. Some ROM will do that and some will pass that ActiveSync with no problem. Personally, I had to go back to the ATT original ROM and ActiveSync works again. Strange, but true.
I had the same issue a week ago...it ended up being the usb port on the phone...had to have it replaced. But--since you can still flash via usb, that probably isn't the problem.
I would uninstall active synch or mobile device center reboot and reinstall...then connect the device.
ok I had a strange problem last night with my wife's G1, it made me think of this thread. I solved her problem and I doubt you have the same problem but here goes anyways.
My wife just got a G1. I plugged it into my computer to load some MP3's on it for her since the G1 is supposed to act like a MicroSD card reader. It started charging but no USB connection was detected. It worked on her computer but not mine. After an hour or so I finally figured it out. The USB cable I use for my kaiser has a 3 foot USB extension on it. after using a different cable without an extension it worked. Try another USB cable.
P.S. "load some MP3's on it for her" HAHAHA I just wanted to play with her new toy!!!!!!!!!!!!
Broken?
Thanks for all the reply people, but still no succes Can the damn thing also just be broken??
Regards