I accidentally renamed a file in my registry on my HTC Fuze. It is under HKLM and it is the folder directly above the "platform" folder. I really need to fix this because my dialer and camera are all screwed up now. Someone please help!!!!!!!!!
----------------------------------
Phone: HTC Fuze
ROM: ROMeOS² 1.40.1
The "folder" above is called "nls" on my Touch Pro.
HTH
DeepThought said:
The "folder" above is called "nls" on my Touch Pro.
HTH
Click to expand...
Click to collapse
I have that folder as well but there is one right before it on my Fuze, probably put there because of a program I installed or something. It contains stuff like the Audio Booster, Camera, FM Radio and a bunch of other important programs. Thanks so much for the input though.
Sorry mate, I'm afraid in this case I can't help. I've searched all entries under HKLM for a subkey containing the names you mentioned but there was none.
So it's either Fuze or ROM specific or some software you've installed.
OK thanks so much for the help. It must be that when I renamed it it moved those files for some reason. i just did a hard reset so I'll just have to reinstall everything. Thanks again for helping out.
Related
Hello,
I've read that this file stores contacts, notes, calendar, and the like. In earlier OS versions, it used to be rather small. in the WM6 Tilt, its 16MB. The properties show it as READ ONLY and in ROM. How can it store and info if it is READ only? It would be great to get this thing reduced in a new cooked ROM. Any comments or suggestions on making the file size smaller? Thanks, MWP.
mwpeters said:
Hello,
I've read that this file stores contacts, notes, calendar, and the like. In earlier OS versions, it used to be rather small. in the WM6 Tilt, its 16MB. The properties show it as READ ONLY and in ROM. How can it store and info if it is READ only? It would be great to get this thing reduced in a new cooked ROM. Any comments or suggestions on making the file size smaller? Thanks, MWP.
Click to expand...
Click to collapse
I also got this file under my Kaiser \Windows directory !
>.< yes help with it.. or tell me how to make a rom with this file smaller
mxip_initdb.vol questions
I've been doing some reading about this file. This file is really large and I want to do something to make sure I have no problems with this file. I removed this file from my OEM_Lang_0409 folder and I'm not sure if I'm having any problems. I seem to be able to connect to activesync okay. Although, it seems like it takes me couple unplug and plug with the USB to connect. Can I be okay with erasing this file?
Return of 16Mb space!
Well,i think now you can forget about this file!
First i cheked it with sktool,it sad than this db is unused
Then i copied it to my card and created an emty txt file with name "mxip_initdb.vol" and readonly attribs and put it in root directory. Reboot- everything works fine And my 16mb returns to me!
P.S.: my device is diamond with 1.93 rom
P.P.S.:My english is not great, but i hope it helps anybody
Interesting.. I suspect there's some very good reason for this file, as many cooks remove everything possible from their ROMs, and my ROMeOS 4.6 has this file.
j-a-c-k said:
Well,i think now you can forget about this file!
First i cheked it with sktool,it sad than this db is unused
Then i copied it to my card and created an emty txt file with name "mxip_initdb.vol" and readonly attribs and put it in root directory. Reboot- everything works fine And my 16mb returns to me!
P.S.: my device is diamond with 1.93 rom
P.P.S.:My english is not great, but i hope it helps anybody
Click to expand...
Click to collapse
i've the same problem with ROM coocked (Dib Diamond 1.9 - based on 1.93)
I've tried with your trick, but after each soft reset "mxip_initdb.vol" returns to 16Mb!
I've tried also to delete it, but again, after each soft reset "mxip_initdb.vol" reappears...
I hate this file.
I have tried using several registry apps to successfully export [HKEY_LOCAL_MACHINE\Software\HTC\HTCHome\Launcher] belonging to a previous Hutch 3 ROM.
I now want to re import these keys into my newly installed Duttys 6.1.
How do I do this?
Scuse the newb question (duck for cover) but on a PC you tap the *.reg and it will import into the registry. On my Kaiser running Duttys 6.1 I have PHM_Regedit but Import option is greyed out.
A search did not resolve it so any help would be appreciated.
logger said:
I have tried using several registry apps to successfully export [HKEY_LOCAL_MACHINE\Software\HTC\HTCHome\Launcher] belonging to a previous Hutch 3 ROM.
I now want to re import these keys into my newly installed Duttys 6.1.
How do I do this?
Scuse the newb question (duck for cover) but on a PC you tap the *.reg and it will import into the registry. On my Kaiser running Duttys 6.1 I have PHM_Regedit but Import option is greyed out.
A search did not resolve it so any help would be appreciated.
Click to expand...
Click to collapse
Install FdcSoft's Taskmanager (it has a built in Regedit), by DotFred. In there you can associate .reg files with it. Then just run them to import.
Great I'll grab it. Thanks Dave I really appreciate the help. I know you all get sick to death of our newb questions.
logger said:
Great I'll grab it. Thanks Dave I really appreciate the help. I know you all get sick to death of our newb questions.
Click to expand...
Click to collapse
Dont worry. I spent 10 minutes trying to use PHM before I gave up.
Dot Fred's TaskManager is a kick ass task manager as well as a reg editor (amongst other stuff).
P.S. Easiest way to associate is: Open TaskMgr, tools, options, Create RegEit Shortcut. This will ask do you want to associate.
Cool I can see how to do all that now thanx.
Only hiccup is I can only run it from my Storage card. I cannot work out how to copy it to my \Windows folder. I cannot work out how to delete the existing basic taskmgr.exe that installed with Dutty's. I guess this is because it is a system file. If I try and copy and replace I get error message saying not possible. Whats the trick here?
logger said:
Cool I can see how to do all that now thanx.
Only hiccup is I can only run it from my Storage card. I cannot work out how to copy it to my \Windows folder. I cannot work out how to delete the existing basic taskmgr.exe that installed with Dutty's. I guess this is because it is a system file. If I try and copy and replace I get error message saying not possible. Whats the trick here?
Click to expand...
Click to collapse
Don't know. I just leave the exe in My Docs, and run it from the shortcuts.
Okay. Will do same. thanks..
Resco Explorer will also do it.
To dotfred from your SD Card, do this:
Place the .exe in you \Storage Card\Programs folder. With your desktop PC, navigate to \Windows Mobile Device\My Device\Storage Card\Programs & right click on the exe file. Select create shortcut. Move the shortcut to \Windows\Start Menu\Programs using desktop pc.
Voilla! you are done, go check Programs & it's there.
this is the steps i usually take when entering in a reg file. I use resco explorer for all this. I double click. Then I make sure I close resco through the menu exit and not the X button. Then I continue to play around with my phone for a while opening up menus and stuff. Then I soft reset. Doing these steps, I for sure get my stuff to work. There might be some unnecessary steps I take, but I end up with what I want. Many people have trouble keeping their registry stuff to stick. The steps I take, I never worry about that.
GSLEON3 said:
Resco Explorer will also do it.
To dotfred from your SD Card, do this:
Place the .exe in you \Storage Card\Programs folder. With your desktop PC, navigate to \Windows Mobile Device\My Device\Storage Card\Programs & right click on the exe file. Select create shortcut. Move the shortcut to \Windows\Start Menu\Programs using desktop pc.
Voilla! you are done, go check Programs & it's there.
Click to expand...
Click to collapse
Thanks for the tip. Was not aware you could make shortcuts this way. Running from the card appeals because the .exe will still be there after reflashing a new ROM and I will only need to move/copy the shortcut. Being a newb I have been somewhat reluctant to run apps from the card but I am gathering that is is a quite an acceptable thing to do.
Is there a way to place registry keys inside a CAB so that they will get imported when the CAB is launched? Whilst the above DotFred association method works a treat for me with ".reg" files I would like to find a standalone method to import registry info. So that I can pass a single file to someone else and without any extra config they can import the contents into their registy.
definitely. There are a lot of cab creators where you can just enter in your reg key and will create your cab. Someone recommended me this program. I really like it.
http://www.aperitto.com/content/view/14/159/
thomassster said:
definitely. There are a lot of cab creators where you can just enter in your reg key and will create your cab. Someone recommended me this program. I really like it.
http://www.aperitto.com/content/view/14/159/
Click to expand...
Click to collapse
Thanks for the link thomasster. Does the job well. Probaly an overkill (and therefore overpriced for what I need), but I got it to work OK. Also from using it, I learnt that the process simply converts the registry keys to provxml. So now I am looking to manaully create the "_setup.xml" and then use iexpress.exe in Vista to create the CABs.
Is there a way to undo changes made by import .reg file?
I imported a reg file using DotFredd's Taskmanager. Now I want to undo it? Is it possible? How?
Thanks
Believe me i have searched for an answer, here is the deal i uninstalled touch flow, cube. from remove programs and now when i turn on my phone i get a dialogue box that tells me it cant be opened and its not signed. the program is uninstalled its not there. i even reinstalled and uninstalled still same prob. please help me its kind of annoying, of it helps i have a tilt with the new rom from htc.
flash your phone to the new rom again and it will be gone
Be nice Grizz,
Use a good file explorer & navigate to \Windows\Startup There will be a file in there called tflo or something or another. Anyway, remove the correct file in startup & all will be fine.
GSLEON3 said:
Be nice Grizz,
Use a good file explorer & navigate to \Windows\Startup There will be a file in there called tflo or something or another. Anyway, remove the correct file in startup & all will be fine.
Click to expand...
Click to collapse
thats what i had to do with quickmenu. I just searched quickmenu in total commander and some files came up and i deleted them and it was all gravy after that.
GSLEON3 said:
Be nice Grizz,
Use a good file explorer & navigate to \Windows\Startup There will be a file in there called tflo or something or another. Anyway, remove the correct file in startup & all will be fine.
Click to expand...
Click to collapse
Well that did the trick, thank you very much for your help!!!
I have just purchased an HX4700 and downloaded a WM6 rom....there are some very talented people out there. I have searched the web for any other rom to get the 'transcriber' functionality back but am not having any luck. I apologise if there is already an entry about this however I have not found it.
I did down a CAB file and copied to my pda, clicked on the setup...got a screen like html text, did a soft reset but nothing changed. It was called MS_transcriber. Any help would be very much appreciated.
Read this and this.
Download.
Thankyou CWKJ for the help.....excuse my ignorance but I'm not sure where to go with the info in the other threads.
I am running wm6.1. I extracted the 'Input Method Fix' and copied the files to my PDA. I then double clicked on the '_setup.xml' file and a list of text like html ran. I then did a soft reset of the device but the transcriber functionality is not listed as a input option.
Do I need to physically alter the registry file and if so how? I have done it on a PC many times but not a PDA.
thankyou for your patience.
By installing the cab, the registry should be correct.
There are tools like TotalCommander (freeware, google and you will find) which I use can help read registry, but do not try to meddle registry for new comers.
For both Recognizers, check if msim.dll is in \windows\ directory.
For Transcriber, check if TranscriberSip.dll is in \windows\ directory.
Using file explorer to check the files may not work as the files may by hidden. If you cannot find them, use TotalCommander as file explorer to check.
If it is not there, I will send them to you, and you just need to copy them into \windows\ directory.
I downloaded total commander. Ran a search for the "TranscriberSip.dll" file however could not find it.
I would appreciate it if you could send it to me thanks.
Shane
.....I had changed the preferences to look for hidden files as I did find the "msim.dll".....still need the "TranscriberSip.dll" from you if you could assist.
Tks, Shane
27/5/08: Disregard my last as I have solved the Transcriber issue. Was a *.cab install issue.
Tks again for the help.
unintentionally, I uninstalled 'onenote' on my tytn II pro
how do I reinstall it?
thanks
_____________________________________
involontariamente, ho disinstallato 'onenote'
come faccio a reinstallarlo?
the cab is somewhere in the dirs of the normal onenote install on your pc
What is a Tytn II pro?
Rudegar said:
the cab is somewhere in the dirs of the normal onenote install on your pc
Click to expand...
Click to collapse
I searched and found many . cab
Perhaps this is "18290_1_MP_ttn_6_032_8351_HTCITA_Kaiser.cab" in the "C: \ Program Files \ Microsoft ActiveSync \ HTC Apps?"
What should I do?
thanks
ChumleyEX said:
What is a Tytn II pro?
Click to expand...
Click to collapse
I believe that both the operating system Win Mobile 6 Professional
hi,
can anyone tell me where to download the file. cab 'onenote'?
or send the file. cab 'onenote?
thank
How did you delete it ? If it was part of your original stock rom, just hard reset. Or , with file explorer, find it in your /windows file and re-install it.
I don't think that you are going to find it in a .cab file, since it was included as part of Office 2010.
denco7 said:
How did you delete it ? If it was part of your original stock rom, just hard reset. Or , with file explorer, find it in your /windows file and re-install it.
I don't think that you are going to find it in a .cab file, since it was included as part of Office 2010.
Click to expand...
Click to collapse
hi,
I'm not sure you uninstall the file, I think I uninstalled because I do not appear anymore in the start menu and can not find the file. exe
office? the version that I found on the TyTN is the 2007
I now look dim in the original installation disks
many thanks
From your desktop OneNote: Tools>Options, select "OneNote Mobile" from the list on the left. There will be a button to install on your mobile device.
hard reset and a backup
i had trouble also with backup
many thank anyway