Help with Creating Cab File - Tilt, TyTN II, MDA Vario III Themes and Apps

I have this comm manager that I found from the forums a while back.. It was made my Mfrazz..... This installs correctly and works fine... However, I wanted to change the color of the buttons from blue to a maroon color that fades to black.. I opened the cab file and found quite a few files and an XML file... I found out the the other files were actually .png files renamed. I renamed them to a .PNG file and and used Gimp to edit the pictures. I then renamed the files back to the origion file extension and rezipped the files using winrar into a .cab file format. When I attempt to install the comm manger. I get an unsucessful error. Heres a pic of the comm manager that I am changing around as well as a copy of the cab file that is not working properly.
Any help would be greatley appreciated. Maybe you could enlighten me on what I did wrong.
This is not an issue where the comm manager is opening in the background. I think I might have done something to the files when editing them to change their colors. Any help would be greatly appreciated.
The picture on the right is the comm manager created by MFrazz.... The picture on the right is me trying to install the cab file that I created. I just edited the pictures of the comm manager to suit the theme on my phone. I have been searching for a comm manager and decided to make on my own..

Related

Personalising ROM's... without Ext_ROM

Okay, there a couple of CAB files I install no matter what ROM I use (Total Commander, Today Screen Speed Dial, MortRing [by .exe], Morphy's Call Filter etc), now that I'm getting to grips with the whole ROM building thing I have a question:
How can I add a program installed via a CAB into a ROM so that it is installed into ROM, I've searched on the forum and can't find much. I know it can be done as ROM's such a TuMa's, Logout's and Ivan's have apps in ROM which aren't there by default...
EDIT: In addition, I overwrite some of the default ROM stuff once I've installed (ETEN M600 Dialler in particular), so again, how can I get the 'bits' out the cab and overwrite the default contents of the ROM, this would make my life much easier...
If this has been posted previously then please point me in the right direction
First extract files, shortcuts and registry entries from the .cab using wince cab manager or similar http://www.ocpsoftware.com/, take note on what directory each file/shortcut is in. (often more reg entries will be stored as a file called 'platformxxx.reg' use these too)
Normal rom edit way: add the contents of the exported .reg files to default.rgu, making sure that you leave a blank line on the end, copy all the files to the \dump directory and edit initflashfiles.dat to copy them to the right directory on first boot. (remeber to remove the first two bytes - ff fe with a hex editor). then build your rom!
Bepe's rom edit way: create a folder '[your software name]' in the oem folder and get yourself a guid from here http://kruithof.xs4all.nl/uuid/uuidgen. create a blank file called '[yourguid].dsm and a blank text file called '[yourguid].rgu'. add the contents of the exported .reg files to '[yourguid].rgu' and make sure you save as unicode. then copy all the other files to the folder and create a blank unicode txt file called 'initflashfiles.txt' and use it like initflashfiles.dat in the first method except there is no need to hex edit out the first two bytes. then build your rom!
midget, you're a star, I thought it may be something simple... I'm off out with the family now for the day, but I'll work on this later, cheers!

noob question...

I have an AT&T Tilt. I am a long time BBerry user who never once tweaked a device.
I would like to install several things including the HTC home and at some point TouchFlo.
Let's use my challenge with the HTC home files. Regardless of whether I use the 1.0, 1.5 or 2.0 files I get the same result.
I copy the cab files to a folder. Browse to the folder using file explorer, click on the setup file and.....
it opens up in Internet Explorer, seems to hang for several minutes and then...nothing.
Am I literally this stupid?
Mike O.
Hi,
I copy the cab files to a folder. Browse to the folder using file explorer, click on the setup file and..... I assume you copied the cab files to your device?
it opens up in Internet Explorer, seems to hang for several minutes and then...nothing. I dont quite get what you mean by it opens up in Internet Explorer? Did you click on the cab file? It is not suppose to open up in IE. Please be more specific..
Cheers
Here's what I have
The folder for the HTC Home Screen has a file called _setup.xml and around 100 files.
I click on the _setup.xml file and it opens in IE. Nothing happens. There is no .cab file in the folder.
Mike O.
You unpacked the CAB file somehow (likely on your PC before transfering). Don't do that. Move the CAB file to your phone, not its contents. When you open a CAB file, it looks to the XML file for installation instructions. If you open the XML file, it thinks you want to read it, so it opens PIE.
So don't unpack CABs.

Cannot copy clg_in.gif, clg_miss.gif, clg_out.gif, spd_lst.gif; access denied.

I used a registry tweak to disable the default AT&T dialer and now I want to change out the images. I am having a problem copying clg_in.gif, clg_miss.gif, clg_out, and spd_lst.gif into the \windows directory. I keep getting an access denied error message. I have turned off the phone and did a soft reset, but that didn't make any difference.
I have attempted to replace the files using my desktop computer and File Explorer.
Does anyone have a solution so I can copy over the four new files?
Thank you.
resco explorer allows you to force the copy.
Thank you.
ekw said:
resco explorer allows you to force the copy.
Click to expand...
Click to collapse
I will give it a try. Thank you.
Update...
I downloaded Resco File Explorer and installed it. I copied the four images to \windows and after confirming the files copied. I can see the correct images in \windows. I did a soft reset but the old images are still showing. I verified that the new images are in \windows. Why are the old images (AT&T crap) still showing?
Thank you.
Bumping = Bad
Sorry to bump my own thread, but I'm fairly confident that someone knows how to correct this problem.
I downloaded Resco File Explorer and installed it. I copied the four images to \windows and after confirming the files copied. I can see the correct images in \windows. I did a soft reset but the old images are still showing. I verified that the new images are in \windows. Why are the old images (AT&T crap) still showing?
Thank you.
its probably a cache issue, such as if u put a picture on a contact, then delete the picture, the picture is still on the contact.
but, i dont know how to do what you are asking.
You can just flash the rom im sure there are more customizable friendly roms out there.

Installing a CAB (Sorry!)

Hi everyone,
I am trying to install various cab's, the ones that I have tried in the past have been one cab file. I simply transfer it to my phone and open it there.
But... some recent files appear as multiple files after I unrar them, none appear to be a traditional "cab" and I can't work out what to do with the them.
Any advice gratefully taken!
That maybe because you are extracting what you have downloaded.
What extension are they when you first download them?
Give us some examples of the full file names after extraction.
Mike
Hi Mike.
The one file for example is the Intent midlet manager, it shows _setup.xml and files such as loads of JMMFIL after I use winrar on them. Should I not be unraring them and just placing the downloaded file on the phone?
It does show as a winrar file, very confused!
In a stunning turn around of events I am an idiot, no need to extract them at all! Thanks all!
Generally a cab file will be seen by winrar/winzip as a compressed file if you open it on your pc. But normally a cab file should be copied to your phone (main memory or storage card) and run from there - no need to extract.

Cannot install Opera 8.65

Hi Guys.
I'm sorry if this is a covered issue but I have honestly tried to search here and google but I cant seem to over come the problem I have installing opera.
I have downloaded opera (http://www.opera.com/products/mobile/products/)
Both .CAB and .MSi versions but when I come to install, I hit a wall.
.CAB
When I open the folder on my desktop, inside i get an XML file and a whole load of numbered files like .000 FILE, .001 FILE etc and I dont know what to do to install it. I've tried putting all these onto memory card and runing from there but there isn't any .exe to run.
.MSI
Windows vista runs the .MSI and it seems like its installing to the PC and not the TYTN. I dont get it.
Please can you help.
With the .cab part of it...all of those files you are seeing are actually the files inside the cab so you need to back up to the folder containing the .cab and you will see a little blue cabinet just drag that into your tilt directory and run it from there.
Hi thanks for the quick reply!
I can't see a Little blue cabinet file anywhere. When I download from opera website. The downloaded file is a Yellow Folder called 'opera_wm5_sp_865' with all these files inside and no blue cabinet.
Move the .cab file to your phone, use the File Explorer and click it.
Also, the MSI will install it to your phone. Did you ever try going through the entire install process?
once you do get that version of opera uninstalled try the one in my 4shared folder (link in my sig). Its modified build by gsleon3 and it is uninstallable
Oh well it might not be little and blue for you...
When I download stuff I try to download it to a folder where I store all my Kaiser stuff on my desktop so the blue .cab file(blue for me at least) is right there so it is easy to find.
Hi,
Been problem solving this issue all day today and now I've finally realised where i've gone wrong! I've managed to finally install it and it was such a small error on my part.
basically, when i downloaded the .cab file from opera website. The icon of the file was a winzip icon becuase winzip was assigned to open .cab's and i was extracting it without realising it was a .cab file. I just assumed that i was supposed to extract the winzip first. lol.
Well, have all sorted it now and I hope this helps someone who gets stuck like me....
Thanks guys!
Also gonna uninstall winzip now!
I had that problem with WinRar for awhile but I just told it to not touch .cabs
Good thing its all fixed. have fun

Categories

Resources