I've got an annoying problem with Bluetooth on my Kaiser. I'm currently using Motorola S9 headphones, I paired them with Kaiser for the first time and everything was working perfectly but whenever I turn Bluetooth on my phone off or pair the headphones to another device I cannot connect to tytn again. I have to delete partnership with headphones on TYTNII and then pair them again to be able to use the headphones. Everything is all right when I turn off the headphones and then turn them on again...connection is established automatically. The problem occurs only when Bluetooth on tytn was turned off or the headphones were used with another device. Is there a solution to this problem?
I've had some BT connecton problems too. I have the SonyDR-BT21Gs and if I pair them with something else, the only way I can get them to connect again is to initiate a phone call. Not sure why, but once the Hands Free protocol connects, the Wireless Stereo protocol also starts working. May or may not help you, though. FWIW, I also have the S9s and have had no problems with them, but I use them only with the phone while working out, so they may fall suffer under the same scenario as I described for the Sonys
Just wonder if Niki can support to have BT connection to A2DP BT Headset while using BT GPS receiver for GPS....
yes it works, although not stable when calling.
you may have to restart the bt headset a2dp. after conecting the bt gps antenna.
erkv said:
yes it works, although not stable when calling.
you may have to restart the bt headset a2dp. after conecting the bt gps antenna.
Click to expand...
Click to collapse
Do you mean that while i'm using the BT connected to GPS receiver and navigating... all the sudden a call came in... i can use the BT headset to answer the call... and the GPS will still able to track and navigating?
ZhenMing said:
Do you mean that while i'm using the BT connected to GPS receiver and navigating... all the sudden a call came in... i can use the BT headset to answer the call... and the GPS will still able to track and navigating?
Click to expand...
Click to collapse
Thats right - at least with the sony headset and tomtom set I use. Both work well all the time
Here it works fine a Logitech bluetooth stereo headset with mic and TomTom with a keomo 16 ch gps receiver, when your call is ended it activates the mediaplayer by itself, only sh*ty thing is that the logitech headset so now and then isnt receiving 100% , but its a almost perfect combination.....
Mine works fine, either with the Moto HS820 or the A2DP Jabras. However I wouldn't ever recommend using A2DP phones whilst driving - it cab be dangerous.
Your normal one-ear devices don't tend to stop you from hearing external noises, which can be essential for safety whilst driving.
that's true... having a2dp headphone in the car is dangerous... but if it's using the normal headset with the GPS that will be great!!!!
since in spain it is forbidden to use headsets while driving, either a2dp or calls, i use a parrot mk6100 w a2dp.
when using the a2dp thru my car stereo i can connect my gps bt antenna.
when the call comes everything works fine.
but, it gets some time to go back after the call (navigator + a2dp). and it is not that smooth. it seems like that is pushing too hard to the limits of the niki.
i read the answer is to restart the conection w the a2dp.
btw, i dont have installed the voices in the navigator so the navigator doesnt interfere w the a2dp.
i can keep trying if you have some other issues.
gps antenna issue blue tooth
hi,
I just boot a niki100, with orange provider in frence. i'm tryng to use a bluetouth gps antena.
both equipement are copled but when i'm launching the navigor the gps peripheric is shown bu the niki only durong approximatively 10 seconds.
I checked all configurable possible, including the verification of the alimentation rule.
i tried si antenna with anothet pda, it is working well. all tests were done without success.
someone could help me?
thank you.
try google maps
or other navigation software
should work
and check the ports btw, just in case.
sometimes they are paired but, not using the right ports may cause some problems.
#2 10-04-2008, 04:16 PM
Marcos Paolo
Junior Member Join Date: Oct 2007
Posts: 9
bluetoouth GPs antenna issue
--------------------------------------------------------------------------------
I tried the antenna with another pda, it is working well. all tests were done with success. I don't understand whynot with the niki.
I did a complementary test, I tried the niki with another gps antenna and it is working well too.
I conclud about a compability issue between my antenna and the niki. maybe due to the bluetooth version.
is it existing a .cab to update the bluetooth driver?
thank you.
not found yet
but keep posting, i am interested too.
any news?
after to have tried many rom and radio version, i finished to buy a new antenna bluetouth v2.
the newone is working. i will sale the oldone to someboday having older phone.
I use a gear4 blueye (can get one for about £20ish on ebay including postage) at the same time as using gps (a holux gpslim 240 with tomtom) in the car.
Plug it into the car stereo and can now listen to ipod music, change tracks, volume & pause+play the ipod safely.
And also make calls by tapping the button and using phone's voice dial, this further pauses any music I'm listening to whilst in call and resumes at the end of the call. It really is a super little device!
ps. if people are having any interface issues: slow hanging up etc.. after calls, then it's worth disabling whatever phone skin you have using 'Advanced Configuration'. The default skin plays much nicer with bluetooth.
I have been having a problem with the bluetooth on my Tilt as it relates to connecting with my '05 BMW X5. I previously had an 8525 and it worked great. It connected with the car and the phonebook loaded. When I switched to the Tilt, I found that it would not work with the X5 bluetooth. Specifically, when the phone connects with the car, it reboots itself over and over until I turn off the car and then turn off the bluetooth on the phone. I have read and it appears that this is not specific to my handset, as many others with the Tilt have had the same problem. I am wondering if anyone knows if it is possible to pull the bluetooth stack from an 8525 and install it on the Tilt so I can regain bluetooth functionality with my car? If so, does anyone have a copy of the bluetooth stack from an 8525? Thanks for your help.
Hey guys got some questions concerning BT.
I have noticed that bluetooth doesnt always reconnect when it should. Or am i missing something here.
I have my phone paired with my stereo receiver in my car.
- I get in my car and turn on bluetooth. After about a minute my phone pairs with my car and everything is good. I can do calls, stream mp3's via BT and use Pandora as well. Now i stop at the gas station to get gas or whatever. I shut the car of there for breaking the bluetooth connection. Bluetooth is still enabled on my android. However when i start the car back up the phone will not connect to the bluetooth in the car unless i turn bluetooth off then on again.
I'm assuming this is do to some time out count in the BT stack? is there a way to edit something in order to make this auto connect? Any one with greater knowledge on the subject school me a little bit here?
Thanks!
Hello,
I'm using the Kensington LiquidAUX Bluetooth Car Kit in my car with my HTC HD2.
http://us.kensington.com/html/14484.html
Connection and reconnection working fine, and the music over Bluetooth sounds really good. (better than before with my Samsung Omnia i900).
But a little problem is there, when I using the adapter with my phone to take a call.
All the people who talked to me over the LiquidAux adapter, the told me that I was so far away.
I don't know in which way I could increase the micro signal , but LiquidAUX doesn't support any changes. Could I change any Bluetooth paramater settings in the Pocket PC Windows Registry ? Or any other idea ?
regards, palmchen