Hello!!
I installed tvout.cab from other HTC device to XPERIA.
In folder windows, after installation, some files were creates: HTCTVOutPopUp.exe,HTCTVOutPopUp.png, etc, etc.....
I plug my tv out cable from n95(Jack to RGB(yellow/white/red)), but only the sound from my xperia listen in my tv, no image at all.
Then, I tried to click and execute HTCTVOutPopUp.exe from windows folder with cable jack plug to my TV, but nothing happens.
Also I tried to modify some registry values like:
HKLM\ControlPanel\TVOutSetting, HKLM\ControlPanel\TVOutSetting
HKLM\Software\HTC\TVOutPopUp/PAL...etc, etc...nothings seems to works.
Sound listen ok, but no image.
I think, that if there are any change that tv-out xperia works, the right cable to plug to TV is mini-usb to RGB like touch pro and no jack to RGB.
I hope you understand my post...I am from Spain and I am writing too fast.
It will not work...
Xperia doesnt have any tv-out features
Thanks for trying it out. Like you said, if there is something there, the system will be identical to touch pro.
Would be funny if the connectors are there
From what I hear Touch Pro has a proprietary USB connector that has more pins and uses them for audio and TV-out. On the other hand XPERIA has a standard miniB USB plug that doesn't host more pins for these functions.
If it doesn't work from the 3.5mm jack I doubt that it will work at all (except if it is a software problem). I am quite disappointed with SE because the hardware is there but they didn't bother to implement the feature.
There are another couple of threads about this already, stating most of what's been said here. There is a "TVOutEnable" or similar reg setting that someone found, though I can't seem to find it on my X1i (more than likely due to the custom ROM, it was on the standard Vodafone UK ROM). Thing is this reg setting is about 6-7 digits long, not just a 0 or 1.
I'd like to see if this setting is also on the Touch Pro, and see if copying this setting to the xperia would make a difference.
Another point is that other phones using the same 4-pin audio output route the TVOut function to the headphone/mic connectors, as does the Touch pro; IF the TVOut function is at all doable, then it will more than likely use the headphone socket. Domin8or said in another thread that the USB connector actually has plated connectors on the other side, like the proprietary HTC USB socket, but I can't tell from looking at mine whether that's true or not, though I intend to test it out by hacking the headset I got with the Touch Pro to fit into the xperia USB socket to see if there are any connectors there.
I somehow reckon this will be done at some point, provided we can get the correct reg settings and software to work; the TVOut function as I understand is part of the chipset, which is just ignored by SE in the xperia, probably because of licensing fees/other costs involved with getting the functionality "approved" by qualcomm. If the TVOut functions on other phones use the same connectors as the headset/mic, then I don't see why the connectors wouldn't be present and connected on the xperia, just not enabled by software... That'll be a job for us* at XDA then
When I say "us" I mean the community in general, there are way, way more talented people here than me who might be able to help with this, I just hope I can help in any way I can testing etc...
Hello!!
That are the values that I "played" in order to try video out works via jack cable.
HKLM\ControlPanel\TVOutSetting/
Group 0/1
HKLM\Software\HTC\TVOut\
FunctionEnable 0/1
HKLM\Software\HTC\TVOutPopUp\
PAL 4
TVMode 4
sethh said:
Hello!!
That are the values that I "played" in order to try video out works via jack cable.
HKLM\ControlPanel\TVOutSetting/
Group 0/1
HKLM\Software\HTC\TVOut\
FunctionEnable 0/1
HKLM\Software\HTC\TVOutPopUp\
PAL 4
TVMode 4
Click to expand...
Click to collapse
sorry I`m not english speaking. but are you saying video out works or You just tryed?
i tried my wired htc remote in the x1 and couldnt get it too work, got it hacked down to shape but it wasnt recognised by the device
its also not the same internals as the touch pro or hd as theres no g sensor
well, unless there are hardware limitations, ex : missing pin or those htc devices are using special jacks; i don't see why it won't work in x1 since it's more than 90% similar to Pro and HD, but perhaps it will need more than just a simple registry hacks.
I guess this all depend on the kindness and dedications from many smarter guys in entire x1 communities.
Hi
Its ane hope to make TV OUT in xperia working?
Sort for my anglish
Did anyone tried putting the Rom of a touch pro to x1 then try the tv out with it?
what
a
pointless
thread...
there is no hardware inside xperia to have tv-out. it is the same case like with people looking for fm radio in tytn 2. if I am wrong, I will eat my shorts.
bronx said:
there is no hardware inside xperia to have tv-out. it is the same case like with people looking for fm radio in tytn 2. if I am wrong, I will eat my shorts.
Click to expand...
Click to collapse
Actually the hardware IS there, we just don't know if it is connected to the USB or audio jack.
It is true though that this seems a long shot.
one of the reasons why I bought the Xperia is because of the TV out....Yikes!
I should have given it a little more research before buying, but if it is really possible, I hope somebody finds out how to do it.
XavierGr said:
Actually the hardware IS there, we just don't know if it is connected to the USB or audio jack.
It is true though that this seems a long shot.
Click to expand...
Click to collapse
probably not connected to anything brah
So at last is it possible or no ?
It won't work and probably never will.
It won't work because of the contacts e.g. 3.5mm it lacks the contacts for video only for left and right speaker and for mini usb, it lacks pins.. it only works with data and charging..
Related
does it really lacks the IrDA port?
I use the irda port on my wizard to download my Polar Data.
Yup, it really does lack IR.
Gordon
Damn you HTC
edgardito said:
does it really lacks the IrDA port?
I use the irda port on my wizard to download my Polar Data.
Click to expand...
Click to collapse
Sucks big time. I used my Trinity as a universal remote. I hate it when they replace specs instead of just upping them.
Cutting reduces cost, size and use of battery life.
Most people didn't use IrDA
maybe you can find one for the SD/IO port ?
DLD
RacerX10 said:
maybe you can find one for the SD/IO port ?
DLD
Click to expand...
Click to collapse
Thanks but I don't particularly like the idea of stuff sticking out of my sd ports. Besides, (micro)SDIO products are few and far between. They never should have removed it because infrared is still used in a number of different appliances which could double your phone as a remote control. As far as I know, it doesn't take up battery life whilst idle (unless you set it to constantly watch for incoming beams?)...
I sure hope their next phone reintroduces it.
forcedalias said:
Thanks but I don't particularly like the idea of stuff sticking out of my sd ports. Besides, (micro)SDIO products are few and far between. They never should have removed it because infrared is still used in a number of different appliances which could double your phone as a remote control. As far as I know, it doesn't take up battery life whilst idle (unless you set it to constantly watch for incoming beams?)...
I sure hope their next phone reintroduces it.
Click to expand...
Click to collapse
Don't like stuff hanging out of mine either!
Sadly, I doubt very much you will see it return in future devices. The TyTn had one, but it's range was veeeery low, just a couple of feet. I have the feeling it's like floppy discs getting as rare as hens teeth.
Mike
Welcome "Industry trends"
Some fool decided that IrDA is a no-go and should be removed from laptops and hence from PDAs since Bluetooth has 100% penetration. Outlook for this was 2007, then pushed to 2008 and now they are talking about 2009... I know my company sells chips with IrDA support for laptops coming out on 2008/9... there is still demand but probably the chipset used for the P4550 does not support FIR (IrDA) anymore...
I am in search for a new device to replace my BlueAngel and have had a look at the TyTn II as well as the P6500 but I am very disapointed to find out that the IrDA is no longer available in the new HTC units. I am using the Ir for several devices like my other phones, Polar sports watch, dive computer etc. so for me the Ir is an essential feature.
Are there any way to get this working, I have not found any external units to connect to the TyTn via mini USB. (Even though I would hate have to have some contraption hanging out of the device.)
As of now I might start consider leaving the HTC-land after 6 years with their fantastic products.
/Ronny
( - Wallaby - Blue Angel - Atom - )
Just wondering if anyone has found a solution/accessory for this lack of IrDA port? I have a Touch Cruise which also lacks a IRDA (Gee thanks HTC). I need to get it to talk to my Polar S625x watch. Anyone found a miniUSB IRDA device?
Thanks
OK, I have read a bunch of posts on the lack of IR abilities and how the Tilt uses BT to beam. I just sent a file from the Tilt to my Hermes via BT and it took about 10 seconds. I enabled IR on both devices and aligned the IR port on the Herm towards the left side of the Tilt and it gave the option to beam, I beamed the same size file and it took less than a second. I am not sure I understand, I repeated the test 3 times with the same result. Any ideas?
has anyone tryed this?
http://www.ameri-rack.com/APA-TFC1m.html
Its a sd to microsd port so you can fit into your sdio irda into your phone. its gona be pretty big but at least that is an option...
Does anyone know if it is possible to use Kaiser to project a power point presentation, bypassing the need for a laptop, and without the use of an intermediate device like the Margi PDA presenter? I read that the new HTC phones may be able to do that, if so is this a software or special hardware wiring? is it a function of the device being VGA or qVGA display? I would appreciate an explanantion by one of the experts.
You are hearing about a technology that hasn't yet been released... it will be a micro projector built into the phone or as an ipod sized accessory.
researchermd said:
Does anyone know if it is possible to use Kaiser to project a power point presentation, bypassing the need for a laptop
Click to expand...
Click to collapse
If you mean the sort of video output dongle thats possible to use with the Touch Pro and other devices, no it won't work if used with the Kaiser. I've not tried it with my Kaiser, I've just read it here somewhere on XDA-DEV that it doesn't work with a Kaiser.
I am talking about the ability of the new devices e.g. Fuze to connect directly to a TV or slide projector using a special cable from the mini USB on on one end and has RCA connections on the other to attach to the external display device. See this:
http://www.htc.com/us/product.aspx?id=58080
Kaiser doesn't support/have the TV Out feature, this was asked and explain before, just search the kaiser forum and you will get your answer.
DG
All,
Just flashed to Solace v3.1 (which I LOVE, btw). Getting an odd issue, hoping maybe someone else can point me in the right direction.
I have an adapter that plugs into the USB port (originally from my Titan) that allows me to plug in both USB power and a headset. From there, I have an adapter that converts to 3.5mm, and a wire which I then plug into the aux-in of my car stereo.
Previously, this set-up worked flawlessly. After flashing to Solace, however, I only get mono sound (right channel only).
I asked in the Solace thread also, but no one else seems to have this issue (or haven't noticed. Sorry for cross posting!). Hoping that someone might have seen this problem in general before, or have a place I might try looking for a possible solution. I searched the entire registry for things like "balance", "stereo", "mono"...even looked at every single entry for "usb" without finding much in the way of a fix. Missing entry perhaps?
Really appreciate anything anyone can do to help at this point!
Damaged mini usb port?
I had the same problem with my Tilt. Although it only had the stock 6.1 rom (fluff free), I'm guessing the pins on your port are misaligned or broken. You soon may discover that it won't sync with your computer and shortly thereafter will not charge anymore.
You may not know how useful USB host is. You can use USB stick (up to 32GB), USB keyboard, USB mouse.
If it had USB host, I'd buy it for sure (wifi only).
Sadly NO...
On German Amazon its possible to pre order the device and the datasheed isnt saying something about USB Host
http://ecx.images-amazon.com/images/I/B1gfmv71YkS.pdf
http://www.amazon.de/gp/product/B0041RSF6Y/
This one was my favorite (because of the Phone capability) until you asked this very good question
Maybe they got it rooted in future and then its possible? (depends also on hardware...)
Greetz Tokl
I'd guess that its not going to ever have the capability without hacking. I don't think any device has that at the moment.
I guess what gets hacked depends on what the hackers think is worth doing, and I can see that USB host would be an especailly awesome thing for the Tab so hopefully it will get some interest.
If its a game breaker, you may well be disappoited for a long while tho. This kind of hacking doesn't happen over night.
LostAlone said:
I'd guess that its not going to ever have the capability without hacking. I don't think any device has that at the moment.
If its a game breaker, you may well be disappoited for a long while tho. This kind of hacking doesn't happen over night.
Click to expand...
Click to collapse
This is SO true. I remember people trying for years to hack USB host mode in to Nokia's Linux Tablets: the N770 and such. I wonder: Did they ever manage to do it?
LostAlone said:
I'd guess that its not going to ever have the capability without hacking. I don't think any device has that at the moment.
...
Click to expand...
Click to collapse
Please someone correct me if I'm wrong (as I don't have the device in question) but doesn't the Nokia N8/E7 support just that? I seem to remember a video demonstration of the N8 supporting an USB memory stick.
Also, the Tab will have a dock that has a keyboard, so it's not totally impossible for it to have USB host capabilities.
AnttiV said:
Please someone correct me if I'm wrong (as I don't have the device in question) but doesn't the Nokia N8/E7 support just that? I seem to remember a video demonstration of the N8 supporting an USB memory stick.
Also, the Tab will have a dock that has a keyboard, so it's not totally impossible for it to have USB host capabilities.
Click to expand...
Click to collapse
I don't know about the N8, sadly I just don't have much interest in that part of the mobile space. However, some googling seems to indicate that it is possible (news articles say so) but I don't know if its naitive or needs hacking.
As for the keyboard and stuff, thats a good point. I can't see them using a non-usb standard for that, so it must just be the proprietary connector that makes the difference. In that case, all we should need is a Tab-USB connector, and a few drivers. That would really give the tab some muscle.
In general can mobile devices support the USB min-harddrives ? The ones that power from the port ? If thats possible then the tab will kick serious ass. 250 gigs in your pocket for cheaper than a microSD card.
I'm not really a fan of Nokia's products either, although they USED to make great products they haven't done so in awhile. And I *hate* Symbian. Anyways, at least the N8 DOES have some USB Host capabilities:
"Among the Nokia N8's neater tricks is its support for USB On-The-Go, which basically lets you connect USB peripherals (flash drives, for example) to the phone and have it act as a host..."
http://www.engadget.com/2010/05/30/nokia-n8s-usb-on-the-go-support-demoed-lesser-phones-turned-in/
That was almost perfectly offtopic, sorry for that ^_^
Oh, or not, perhaps! Look what I JUST found:
"USB Standard port adapter
With this kit your Galaxy Tab becomes a standard USB port. With this USB port you can synchronize your digital camera or other devices."
http://www.oled-display.net/more-sa...s-bluetooth-pen-standard-usb-adapter-and-more
Well if they are going to officially make an adapter then maybe we are going to get USB Host... I can't see how you could transfer things off a digicam without the Tab hosting it as a drive.
Well... This looks pretty awesome then.
But they *CAN* cripple the functionality to just mass-storage devices or perhaps just cameras, like Apple did with their USB Camera connection kit, or whatever it was called.
Let's just hope that Samsung doesn't go that route.
Hopefully samsung aren't that stupid Although in theory we should be able to hack it back open anyway, and its a good start at least.
Sorry to resurrect this old thread, but I'm also wondering about usb host (or at least OTG) on the Tab (as I'm considering buying on to port Meego to).
Could someone who has the keyboard doc post the dmesg output once it's been plugged in please?
From some dmesg output I saw elsewhere (but not with the keyboard dock), it appears that the USB chipset is an OTG version, and seeing it act in host mode with the keyboard doc plugged in would be a nice confirmation.
I Would be interested to see the anser for this one.
Yes it is launched (mainly for photographers) i have seen it's price, very cool cheap at £10000 plus something!
Sent from my GT-P1000 using XDA App
It's not the Fools Day yet, so keep your jokes at bay.
OK, I just ordered a keyboard dock and I'll have a look. I'll post a dmesg output and open it to see if the PCB is marked in any way.
According to the pinout (http://forum.xda-developers.com/showthread.php?p=9925838) there seems to be no other way for data to flow apart from USB.
So one of the following must (should) be true:
1. Samsung is reusing the pins for a proprietary protocol -probably reconfiguring the device by pulling up or down other pins.
2. The device is capable of host/OTG mode but it is probably unpowered and it probably needs a pin pull-up/pull-down to enable.
3. The keyboard is using unidentified pins, and the USB pins are used simply for the PC connection and power.
Does anyone know if the keyboard acts as a proper dock? i.e. when you connect it to the pc does it work at the same time as (say) KIES or drive mount?
Just a quick update, the keyboard was just shipped, and I should have it by Tuesday.
Sent from my HTC Vision using Tapatalk
Hi,
Just wondering whether you got any further with this?
Sent from my GT-P1000 using XDA Premium App
There was a problem with my order (the company didn't have any in stock) and the keyboard hasn't arrived yet. Still waiting!
I'll post the moment it arrives.
EDIT: Normally I would name and shame the company, but they are sending me a couple of freebies for their mistake so I'm happy
USB host
This is a good concept. I have an Archos 70 and a Galaxy tab. Archos has a micro usb port with which I connected my USB host adapter and the key board and mouse works . Flash drive and router dongle says more power required. So I am looking for a powered USB connector for this.
Unfortunately, Galaxy tab has different cable and I dont know if I can find a host cable for this. Any suggestion?
Worth a shot?
After reading this thread:
http://forum.xda-developers.com/showthread.php?p=9925838
I checked the G-Tab pinout :
http://en.wikipedia.org/wiki/PDMI
and tried to ground pin 13 to put the tab in host mode last night... needless to say since I'm typing this on my computer... epic fail. However, I'm curious if anyone else has had any success with this.
I'm not too much of a fan of buying something to destroy... but if I have to disassemble a dock to get the pinout for monitor mode... suck!
Anyone have any advice as to what I jacked up here?
Is it possible?
I have O2 XDA Flame working on USB OTG (I think O2 is supplied by HTC) but the device is the way too big. Since X1 is made by HTC too, is it possible?
Hi VSJ, I've read it somewhere, let me google for a momment...
http://russelleclaircorner.blogspot.com/2010/10/customize-x1-usb-flash-drive.html
It's clearly written that X1 won't be able to do so due to limited hardware. Just like TV Out. So far that I know, no matter what to do, X1 has no required hardware or those things.
mymailx said:
Hi VSJ, I've read it somewhere, let me google for a momment...
http://russelleclaircorner.blogspot.com/2010/10/customize-x1-usb-flash-drive.html
It's clearly written that X1 won't be able to do so due to limited hardware. Just like TV Out. So far that I know, no matter what to do, X1 has no required hardware or those things.
Click to expand...
Click to collapse
I am able to use the PS3 controller using the USB OTG cable. It works perfectly and I can use it to totally navigate the phone. Does that mean OSB OTG is working on the Xperia Z1?