Since a couple of weeks ago, I seem to be having problems getting a solid connection. I have my device set to check mail every 4 hours and latest PhoneAlarm to dis after 2 mins.
What happens is a get a 3G connection, no data is transfered so Outlook hangs on connecting and the PA software does not dis. Since no data is transfered is not costing me. Sometimes it connects fine, does'nt seem to be a local problem.
Do I need to check settings?? Anyone got them? The phone is HTC branded straight out of box.
Thanks
(t-Mobile uk)
I have a TyTNII phone and after reading extensively through the threads posted, seems to have a unique problem.
My device will show the "E" icon and service provider in the Today screen and everything will be normal.
After connecting to the Active Sync via USB the phone will be normal for a while, but at some stage will disconnect from the GSM network and show no service.
At this stage the "E" icon changed to a "G". I have tried selecting the service provider, finding the network etc, but it keeps telling me to disconnect the data service and try again.
At first I thought it was blue tooth, but it does make no difference. I have loaded all the comm utils I could find and none is showing any active data sessions or connections.
Reset does not work, taking the SIM out and putting it back does not work, not even taking the battery out makes a difference.
All that seems to work is to put the SIM back in another phone and let the phone boot up to get GSM connection. After that I can put the SIM back in the TyTNII and all will be fine - even for days - as long as I do not connect USB to the PC.
Do you have any ideas on what I can do to solve the matter - it is irretating like hell to swap a sim every now and then...
could be wrong but is there a wired connection on your pc/laptop that uses a dial out and not gprs, this could cause it to run a connection on gsm on gprs.
Thank you for the reply - I have checked my pc and have no dialup connections - currently connected to Internet via Ethernet.
I have also checked the phone - during this shutdown period I am able to browse the internet from the phone.
This tells me that I have internet access, just no GSM service - its like the phone is switching the GSM network off, but GPRS and Edge is still working.
Hope that helps
Dunno where you are geographically, but At&t had some major down time last friday or thursday and it seemed again this week on tuesday or so.
Maybe this was effecting you? (boston area) Only time my kaiser does **** like that is when i leave something conflicting open, (mail, or a browser)
good luck
A strange problem..
I recently got GPRS activated on my sim..
When i try connecting on my Diamond, the E becomes active and it tries to connect.. But after abt 30 secs to a min, it says "Cannot connect for an unknown reason... etc etc.."
I initially thought it was a problem with the network..
But, when i put the same sim in my old Asus P525, set up the connection and tried to connect, the G became active and got connected within a few seconds!!!
From then i've been tryin to connect on my Diamond and have got connected about twice with E in the signal bar.. But that must've been some freak accident cos after a few hours i tried connecting w/o changing any of the settings and absolutely no luck!
I've tried almost all the cooked ROM's. And different radios.
Right now i'm on the Official WWE ROM 1.93.
Hard SPL 1.23 or 1.24.
And 1.00.25.03 Radio.
Any idea about what's wrong, guys?
Make sure you have the correct GPRS/WAP settings installed on your HTC Diamond.
There are different settings for Payandgo and Contract SIM cards.
You can try searching Google for them, or if you live in the UK try this website: http://www.filesaveas.com/gprs.html
prank1 said:
Make sure you have the correct GPRS/WAP settings installed on your HTC Diamond.
There are different settings for Payandgo and Contract SIM cards.
You can try searching Google for them, or if you live in the UK try this website: http://www.filesaveas.com/gprs.html
Click to expand...
Click to collapse
prank1, the settings are right..
That's why it's working on my old phone..
I think it may have somethin to do with Edge and GPRS..
Maybe my service provider does not have Edge capabilities..
If i'm able to restrict my Diamond to try and connect to Edge and connect to GPRS instead, it may work..
Any way that could be done?
sanctifiedrust said:
A strange problem..
I recently got GPRS activated on my sim..
When i try connecting on my Diamond, the E becomes active and it tries to connect.. But after abt 30 secs to a min, it says "Cannot connect for an unknown reason... etc etc.."
I initially thought it was a problem with the network..
But, when i put the same sim in my old Asus P525, set up the connection and tried to connect, the G became active and got connected within a few seconds!!!
From then i've been tryin to connect on my Diamond and have got connected about twice with E in the signal bar.. But that must've been some freak accident cos after a few hours i tried connecting w/o changing any of the settings and absolutely no luck!
I've tried almost all the cooked ROM's. And different radios.
Right now i'm on the Official WWE ROM 1.93.
Hard SPL 1.23 or 1.24.
And 1.00.25.03 Radio.
Any idea about what's wrong, guys?
Click to expand...
Click to collapse
My bad - didnt see the 'set up connection' bit so I assumed you didnt have the correct settings.
I had this problem once but it went away with a ROM upgrade - that was when I had the XDA Orbit.
The problem may be that my phone does not try connecting to GPRS and directly tries to connect Edge..
Isn't the connection supposed to be G-E-3G, in that order?
Is there any way i can prevent my phone tryin to connect to Edge?
Can i make GPRS as first preference instead?
Anybody? Please?
From what i heard my diamond doesn't support US( or Canada which is where i live) 3g because of diamonds hardware so that's why it only connects to edge which is really slow... anyways to connect i had to phone rogers my wireless provider and they gave me my username and password which was needed to connect online. So i'm guessing it's the same for you if you go to
Settings > Connections > rogers internet( for mine) > Manage existing connection
from there you'll go to the next page where you can input your info.
NekciuQ said:
From what i heard my diamond doesn't support US( or Canada which is where i live) 3g because of diamonds hardware so that's why it only connects to edge which is really slow... anyways to connect i had to phone rogers my wireless provider and they gave me my username and password which was needed to connect online. So i'm guessing it's the same for you if you go to
Settings > Connections > rogers internet( for mine) > Manage existing connection
from there you'll go to the next page where you can input your info.
Click to expand...
Click to collapse
Hey.. That doesn't seem to be the prob since i can get it to work on my old PDA with the same settings..
That phone gets connected and it shows 'G'.
What might help me is somethin to block my phone tryin to connect to Edge before it even tries to connect to GPRS..
I don't think that's practical, but wishful thinking..
I've had the same issue with my Diamond, I know for sure that the network settings are correct as it sometime connects fine and other times I keep getting the "Cannot connect for an unknown reason..." error- only a soft reset would resolve the issue. Seems a bit random but am trying to monitor what is causing it.
It always used to work fine on my Hermes. BTW I'm using Dutty's ROM on my Diamond.
sh500 said:
I've had the same issue with my Diamond, I know for sure that the network settings are correct as it sometime connects fine and other times I keep getting the "Cannot connect for an unknown reason..." error- only a soft reset would resolve the issue. Seems a bit random but am trying to monitor what is causing it.
It always used to work fine on my Hermes. BTW I'm using Dutty's ROM on my Diamond.
Click to expand...
Click to collapse
Yeah.. Sounds almost like my prob..
Could it be a rare manufacturing defect sort of thing thats affecting our phones?
Cos nobody else seems to have such an issue..
And i keep changing between Dutty's and Panosha's ROM..
I don't know if it's same problem you have ,
but I had kinda same problem..
I found that the lame ActiveSync change the proxy of my internet connection and put in the internet connection proxy my local proxy at work, even I removed the proxy it didn't help (dunno why) , just by adding new connection from the advance and adding new name etc.. it solve the problem...
sanctifiedrust said:
And i keep changing between Dutty's and Panosha's ROM..
Click to expand...
Click to collapse
I've only had my Diamond (MDA Compact IV) for only about 3-4 weeks. I was so keen to flash to a different ROM that I did so within 10-15 hours of receiving the device; my point being that I didn't get to try out my data connection on the stock T-Mobile ROM.
The connection seems to be fine today...!
arix said:
I don't know if it's same problem you have ,
but I had kinda same problem..
I found that the lame ActiveSync change the proxy of my internet connection and put in the internet connection proxy my local proxy at work, even I removed the proxy it didn't help (dunno why) , just by adding new connection from the advance and adding new name etc.. it solve the problem...
Click to expand...
Click to collapse
Hmmm.. I don't think i have the exact same problem, but somethin similar..
I'll try adding a new connection..
Thanx..
As I know something with Activesync **** the GPRS connection..
Let us know if you solve your problem with new connection...
Ok.. Note the "E" in the first pic and in the second..
The first one is 'clear' and the second one is 'hazy'!
When the "E" is 'clear', my GPRS connects!!!
I found this out after putting a different sim card of a different network and connecting..
When i put the other sim card, i got 'clear' "E" and GPRS worked..
Then i put back my old sim card and on switching on the phone, the "E" was still 'clear'!!
On tryin to connect, it worked!!!! Even after several manual diconnections, it worked only cos the "E" was still 'clear'..
Then i reset my phone with my sim card and got the 'hazy' "E".. And back to square one.. Not connecting..
My question is, what does this 'hazy' "E" mean and how do i make it 'clear'???! Only then my GPRS seem to work!
Help!!!!!!
This is how it is when connected properly..
Cannot connect for an unknown reason
I also had this problem. To make my story short, I have a data plan with Claro Peru which I have been using with my Touch (not 3G phone) with no problems. 3 days ago I acquired my Diamond 3G US version. When attempted to connect to the HSDPA I got the error mentioned here (cannot connect for..., sometimes the "H" symbol was difusse [like in the picture in a previous post in this thread], etc). The root cause of this was that my data plan only have GPRS/EDGE activated, my network provider (Claro) differentiates 2G internet vs 3G (so no HSDPA/UMTS until subscribing to a new plan).
The **SOLUTION** for my case was to select under "Select your network type" the option GSM (Start, Settings, Phone, Band tap). The option Auto was the default. Thus restricting to EDGE my data connection (which is according to my plan). Also, on the same tap I selected UMTS(850+1900)+GSM(850+1900) under "Select you GSM/UMTS band". You have to select here the frequencies according to your country.
P.S. The problem was the same before and after I updagred my ROM to RUU_Diamond_HTC_WWE_2.03.405.3_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship. So, two things to mention here. 1, A ROM upgrade is not the solution for this problem (in my case). 2, you can upgrade the Diamond US version (my is DIAM110) with a WWE ROM upgrade.
Hope this help someone.
dach said:
I also had this problem. To make my story short, I have a data plan with Claro Peru which I have been using with my Touch (not 3G phone) with no problems. 3 days ago I acquired my Diamond 3G US version. When attempted to connect to the HSDPA I got the error mentioned here (cannot connect for..., sometimes the "H" symbol was difusse [like in the picture in a previous post in this thread], etc). The root cause of this was that my data plan only have GPRS/EDGE activated, my network provider (Claro) differentiates 2G internet vs 3G (so no HSDPA/UMTS until subscribing to a new plan).
The **SOLUTION** for my case was to select under "Select your network type" the option GSM (Start, Settings, Phone, Band tap). The option Auto was the default. Thus restricting to EDGE my data connection (which is according to my plan). Also, on the same tap I selected UMTS(850+1900)+GSM(850+1900) under "Select you GSM/UMTS band". You have to select here the frequencies according to your country.
P.S. The problem was the same before and after I updagred my ROM to RUU_Diamond_HTC_WWE_2.03.405.3_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship. So, two things to mention here. 1, A ROM upgrade is not the solution for this problem (in my case). 2, you can upgrade the Diamond US version (my is DIAM110) with a WWE ROM upgrade.
Hope this help someone.
Click to expand...
Click to collapse
I have the Diamond on T-Mobile in the UK with the web'n'walk plan (HSDPA enabled - although not the higher-speed "plus" version). This happens to me every single time I'm in a GPRS-only area - when I have HSDPA coverage, it connects fine. In order to get it to connect, I have to open the Comm Manager, turn off the data connection and re-activate it.
Before anyone asks, my connection settings are all correct and I've tried numerous different main and radio ROMs - nothing makes a difference. I'll give this a shot, see if it makes a difference.
BLCollier said:
I have the Diamond on T-Mobile in the UK with the web'n'walk plan (HSDPA enabled - although not the higher-speed "plus" version). This happens to me every single time I'm in a GPRS-only area - when I have HSDPA coverage, it connects fine. In order to get it to connect, I have to open the Comm Manager, turn off the data connection and re-activate it.
Before anyone asks, my connection settings are all correct and I've tried numerous different main and radio ROMs - nothing makes a difference. I'll give this a shot, see if it makes a difference.
Click to expand...
Click to collapse
OK, I would try the option Auto for the "Select your network type" so the phone auto negotiates the technology in use (between GPRS or the much better HSDPA), but change the option for the bands according to your country.
Let us know the results!
my att tilt was working fine, now i cannot access internet and the 3g symbol is gone from signal bar. i have tried soft reset a few times and removed battery still nothing, any ideas?
thanks
magically started working all by itself!
I've got the H symbol, but will not connect
albany problems too
I'm in Albany, NY.
I tried to tether my tilt and use the internet shareing program which has worked perfectly in the past and i could not connect. I tried the "connection settup" program just in case i accidentally messed up the proxy settings or something.
still not working.
can't connect to the internet or send and recieve mail.
i can make and receive calls... but thats it.
spoke to a business partner of mine and they use iPhones. One of his applications that requires internet is not working either... it could be more apps... he hasn't tested as much.
WHAT'S GOING ON AT&T!? please don't tell me we are having an at&t blackout like some other parts of the country has!!
Mine just started working... I think... When it loaded google.com the phone froze up
I'm back up, but was down for 3 hours this morning here in St Louis, MO.
OK, now I have to figure out why PIE locks up the phone
this can be the reason:
AT&T suffering a data outage, again
http://www.boygeniusreport.com/2009/01/06/att-suffering-a-data-outage-again/
I called up customer service and got $2 back on my current balance. Tried to get rollover minutes, no luck.
What's the difference in the H and G icons? I always have H or E but never G.
the weirdest thing happened to me, my phpne was working fine, i flashed fearkill fr13 after a full wipe coming from fr12 mcr.
It worked well for a couple of hours and all of the sudden i cant connect to my network. The only way it connects is by enabling 2g networks only and even like that i cant make any calls. I have even tried reinstalling the baseband 405 and nothing works...
My network is fine by the way, its just my phone
Please help me!!
Edit:
A little more info:
I tried a different sim card with the same results
Whenever i try to search for a network it just stays thinking for a while and does nothing
When I try to do it automatically it says it cannot connect to the network at this time immediately...
I managed to make a call on 2g networks only but as soon as i remove the check i cant connect
Edit 2:
Woooooow, this just gets weirder by the second!!
I can connect to the internet with wifi disabled and a clear X on the network as in no network connection... I can browse the internet just fine, NO CALLS though
... after countless Wipes and installing plenty of roms With no luck i gave up and as soon as i Woke up it Was Working again... strange but im happy
Guess it was your network after all
maybe, i had a blackberry beside it with a working 3g connection :S
And no idea how to explain 3g working with no bars and an x on it haha
O have problems with my network connection too.
In some rooms at my house I can get 3G access and in another room only EDGE.
Several times per day I can't get access to the network anyway. The only way to solve the probölem is to restart the phone.
Sometimes my phone tells me it is connected but there is no data transfer for several hours. I noticed that when I got home and many emails from the last hours appeared after being connected to my wifi.
I'm using the MCR but I've also tried the ROM from romkitchen-org. Changing the baseband had no effect.
I'll have a try with the stock ROM. If this would fail too I'll send my phone back to the dealer. I think it could also be an hardware defect.
Greets from Germany