how to check manila version? - Touch Diamond, MDA Compact IV General

i searched and searched and searched here, ppcgeeks, and all over the phone but cant find how to check the version of manila. i see some tweaks and mods only work on certain versions, such as mun_rus's extensions. so how can i verify which i currently have? thanks in advance.

At Settings tab, scroll to the bottom. There is some version information.
(not sure if it's what you want, though)

there is nothing in the settings area that i can find thats shows the manila version. please be specific

When at Settings tab, put your finger at center of screen, then move it up.
edit: included a shot to show what I mean.

holy hell! never knew that was hidden there. thank!

For me ther's nothing there!, on clicking it open one ureadeable page (even in bigger font available) in opera......

So you mean I have 1.3.3739....... version of manila ? Evreywhere is about 2. something manila version and I have an 1.3 ?

Mine says "About (Copyright Information)" but no version...

vsviridov said:
Mine says "About (Copyright Information)" but no version...
Click to expand...
Click to collapse
Same here..

Same with me too,
so
where is the manla version located ?

spambusterdave said:
Same here..
Click to expand...
Click to collapse
Oops, mine also. "manila were are you?"

HKLM\SOFTWARE\HTC\Manila\Version

Thanks! really helped...

kosherpig said:
When at Settings tab, put your finger at center of screen, then move it up.
edit: included a shot to show what I mean.
Click to expand...
Click to collapse
ok....i'll try this .................
br,
bronce

help
Did any one help us out... how to find out manila version..
today only i learned that manila 2.5 and sense 2.5 is same...
what version manila ?
Touch Pro 2

Everyone
Did anyone find and answer to this question

tlrosier said:
Did anyone find and answer to this question
Click to expand...
Click to collapse
cko2 has the correct answer. Check the registry. If you are a noob like me and immediately asked "how do I do that", here's a tool I found that does the trick:
CeRegEditor
You run it from your PC while your phone is connected, and you can view and edit the registry from a Windows GUI. Btw "HKLM" is short for HKEY_LOCAL_MACHINE.
Btw, my settings tab also says "About (Copyright Information)" but no version number, and it turned out to be v2.1.19xxx after I checked the registry, so that's a good guess if your says the same.

PHM Registry Editor
Or use PHM Registry Editor. Install it onto your device, and you can view/modify whatever registry key you like. At your own risk of course.
But, as stated above, /HKLM/SOFTWARE/HTC/Manila/Version

Related

Battery and CommManager on taskbar?

Anyone know how to add these icons on traybar just like Schap's ROM ?
applications called: Power & Wireless service Manager (shows Bluetooth/Wi-Fi on traybar)
I dont want to use homeplug or other trayluncher, thanks..
optiquest said:
Anyone know how to add these icons on taskbar just like other wm5/6 ?
Click to expand...
Click to collapse
no one can answer me?
optiquest said:
Anyone know how to add these icons on taskbar just like other wm5/6 ?
Click to expand...
Click to collapse
For the power, try this. Make a shortcut of the exe file in windows\startup folder.
optiquest said:
no one can answer me?
Click to expand...
Click to collapse
Settings - Today - Elements - Tick the box "HTCHomeplug" .. voliá
research12 said:
Settings - Today - Elements - Tick the box "HTCHomeplug" .. voliá
Click to expand...
Click to collapse
really thanks, but what I need is Power & Wireless service Manager (shows Bluetooth/Wi-Fi on traybar),
idea from Schap's ROM (for Hermes), hope someone can tell me how to do that to support on Kaiser ....
check here: http://forum.xda-developers.com/showthread.php?t=338946
RGDs, Optiquest...
hey, man! how about to search little bit? there is almost every day this question and it has been solved many times. here it is for a last time and hope mods will delete this kind of question if there are some new comming!
for tray launch apps use phm tray launch!
patr!k said:
hey, man! how about to search little bit? there is almost every day this question and it has been solved many times. here it is for a last time and hope mods will delete this kind of question if there are some new comming!
for tray launch apps use phm tray launch!
Click to expand...
Click to collapse
You dont get what I mean, i dont want any tray launch,
this application is called "Schap's Power & Wireless service Manager (shows Bluetooth/Wi-Fi on traybar)" , develop by Schap, just only need power_srv.dll and wirelessMgr_srv.dll and enable some register keys...
besides, this Wireless service Manager = WIFI+BT+Flight mode in a icon..
so now, u know what i mean now??
and sorry for my poor english...
now clear
are you sure, that you need only these two dll files? looks like it has own icon "advanced configuration".. did you try to contact someone from hermes section, to give you these two files + reg. keys?
patr!k said:
now clear
are you sure, that you need only these two dll files? looks like it has own icon "advanced configuration".. did you try to contact someone from hermes section, to give you these two files + reg. keys?
Click to expand...
Click to collapse
in fact, I got these 2 dlls from Schap's ROM and copy them (include power.exe) into my TYTN II, then import these 2 reg keys, now there r two icons on my kaiser's traybar, but, but, when I enable WIFI/BT/Flight mode,
only WIFI/Flight mode's icons show instead of wireless icon, so maybe need other dll reg. key i havn't found ...
I have asked Schap several times, even pm him, but still no answer, pity....
so only i can do is ask professional persons here...wow -_-
optiquest,
here is a full package of "advanced configuration". i tried to move it to \windows folder and run application, but there is an error msg. could you try and share your status?
patr!k said:
optiquest,
here is a full package of "advanced configuration". i tried to move it to \windows folder and run application, but there is an error msg. could you try and share your status?
Click to expand...
Click to collapse
everything woks fine on my kaiser...
ps: i use chinese version, and run on SD...
hmm, strange..
when i start that, i get error msg - in advanceconfig.exe there is an unexpected error. choose "end" and then restart this programm. if you want to get more information, choose "details"..
when i click "details" there is:
advancedconfig.exe
invalidcastexception
at system.convert.toInt32
iat advancedconfig.
at advancedconfig.
at system.windows.forms.form.onload
at system.windows.forms.form._setvisiblenotify
at system.windows.forms.control.set_visible
at system.windows.forms.application.run
at advancedconfig.
Click to expand...
Click to collapse
any ideas? did you used some special dll files? did you installed net compact framework? grrrrr- i wanna run this
patr!k said:
hmm, strange..
when i start that, i get error msg - in advanceconfig.exe there is an unexpected error. choose "end" and then restart this programm. if you want to get more information, choose "details"..
when i click "details" there is:
any ideas? did you used some special dll files? did you installed net compact framework? grrrrr- i wanna run this
Click to expand...
Click to collapse
I had problems like u before when i use Hermes..
Have u changed CommManager's details? or try to disable HTC home and try again..
ps: I use standard WM6, use its build compact framework..
change commmgr details? what do you mean?
i do not use htc home
hmm, did you exported some registry? what do you have setup in region settings?
patr!k said:
change commmgr details? what do you mean?
i do not use htc home
hmm, did you exported some registry? what do you have setup in region settings?
Click to expand...
Click to collapse
if I change commManager in Advanced config (eg: add 3G or del something etc), next time when I reboot pda, I will get some error there...
Advanced config for me is useless except enable cleartype, so I think KaiserTweak will be better when I want to change somethiing in Registry.

How to change the main menu soft button?

Hi,
I have a Treo 750v (Vodafone version) which like what it's box said it is meant for email solution, that's why the left soft menu of the Today screen menu is set to Email.
Anyone know how to change this?
Thanks, appriciate your share of knowledge!
I forgot the details but this i know as much
You have to download the register editor program. Search around the registry is all the same when it comes to changing soft key for all WM phones.
The only problem with the Treo 750 is when you change the softkey from email to something else it ends up adding an extra short cut. So in essence you are not overwriting that key, all you are doing is adding an extra feature on top of the existing email button.
Maybe someone had better success than I did can chime in
Using a registry editor, navigate to Hkey_Current_User/Software/Microsoft/Today/Keys/112
Change all 3 values to reflect your new function
or:
http://wiki.xda-developers.com/index.php?pagename=Universal_Registry
awesome!
mtiberio said:
or:
http://wiki.xda-developers.com/index.php?pagename=Universal_Registry
Click to expand...
Click to collapse
wow, thank you very much mtiberio!
your link really hit the spot!
Very odd - my Registry setting for 112 was already showing Calendar as the default value but on screen it shows email.
tinyflier said:
Very odd - my Registry setting for 112 was already showing Calendar as the default value but on screen it shows email.
Click to expand...
Click to collapse
It's all because Palm plugins - they overlay it. If you disable Active Call (or Dial Lookup?) you can have native-windows softkeys. It was all described in instructions how to ged back default dialpad.
i just downloaded the soft key changer that i found on here i think it was in the hermes section and copied it to my windows folder... after i did that it shows up in my settings and i can change both soft keys to what i want
was it:
"FdcSoft SoftkeyAppletEx.cab"
Gyngabread Man said:
i just downloaded the soft key changer that i found on here i think it was in the hermes section and copied it to my windows folder... after i did that it shows up in my settings and i can change both soft keys to what i want
Click to expand...
Click to collapse
it would be great if you share the file or where you get it, so we all can get it too...
mtiberio said:
was it:
"FdcSoft SoftkeyAppletEx.cab"
Click to expand...
Click to collapse
it is caled softkeyapplet but its not a cab it was a zip i just unzipped and put in my windows folder i believe... i will look in my external driveand post it im not sure where it is but i'll try to find it
ok i found it on my drive but i did some searching on the forums and alot of ppl mention it but dont upload it and im guessing its for good reason... dont wanna piss ppl off by posting something i shouldent if its ok though then i'll do it but i think its the same one your talking about for me it worked like a charm no reg editing
Here it is:
http://forum.xda-developers.com/attachment.php?attachmentid=65261&d=1199898052
Found it here:
http://forum.xda-developers.com/showpost.php?p=1802007&postcount=827
You will need to reset your device for it to show up in your programs list.
Chillin said:
Here it is:
http://forum.xda-developers.com/attachment.php?attachmentid=65261&d=1199898052
Found it here:
http://forum.xda-developers.com/showpost.php?p=1802007&postcount=827
You will need to reset your device for it to show up in your programs list.
Click to expand...
Click to collapse
Hi, thannks for the direct links. I'm going to try installing it. i hope it'll be fine.
seems it doesn't work with wm6. after installing it, the program isnt available in my program.

Remove tab in TouchFLO 3D

anyone know how to remove useless TAB in TouchFlo 3D ?
anyone thanks
i would like to bump this because i am also interested in the topic
The tool in this thread can do exactly that
I tried this tool, and i manage to take the internet tab in TF3D off, but no way to put the "calls" tab... and i didn't manage to put the internet tab back... but perhaps i'm doing something wrong...
But if for sure you want to remove a tab, it worked.
Ciao
Fred
drvdijk said:
The tool in this thread can do exactly that
Click to expand...
Click to collapse
This is a great tool, but when I used it on my stock rom the album didnt work?! "photos&Videos" didnt show any pictures I only could launge the camera
omaga said:
This is a great tool, but when I used it on my stock rom the album didnt work?! "photos&Videos" didnt show any pictures I only could launge the camera
Click to expand...
Click to collapse
you have to select and album to be your favorite then the album you selected will be shown in pictures and videos tab
charly_mx said:
you have to select and album to be your favorite then the album you selected will be shown in pictures and videos tab
Click to expand...
Click to collapse
OK! Must try that..thx for the tip charly, didnt now that
Is there any way around the program ... say editing a registry?
Diamond TF3D Config 0.6.7
check this
http://forum.xda-developers.com/showthread.php?t=405749
I'm aware of the TF3D tool. For the most part, I'm able to edit my registry manually just as if I were to check and uncheck the options available on the tool. I'm stump as far as "removing" a TF3D tab. I'm a space conscious guy (granted however small the file may be) - I will only resort to downloading a program when I have exhausted all possibilities. I've spent hours going through the registry but still no go. Any help would be great!
from http://forum.xda-developers.com/showthread.php?t=423647
- you can edit \windows\26948339_manila (i used total commander to edit)
- the tabs are listed like the calendar example you see there
- just remove the ones you don't want. you can also change the order. just make sure there's no gap between the numbers.

No paste menu item on phone dialpad

Hi Guys & Gals:
Have you found there is no paste menu item on phone dialpad?!
Please if you found it, tell me how, cause it too much difficult to use. thank u!!!
Errr there is on mine (tlr 3 rom), if you have already copied something (a number i am assuming) then go to 'phone' and click menu (bottom right), then click 'paste', it is like the 7th option on that menu... what's the problem? maybe I misunderstood your issue...
hi man:
no, actually even i copied something like a phone number, this item still not exists. my rom version is 1.35.707.3 WWE, it's official.
nuclear_1000g said:
hi man:
no, actually even i copied something like a phone number, this item still not exists. my rom version is 1.35.707.3 WWE, it's official.
Click to expand...
Click to collapse
Why don't try so:
1) select with the stylus what you need
2)push the stylus over there(it will appears a menu with copy option)
3)tap on copy
4)go to the application in wich you want paste it and simply re-push the stylus
5)it will appears the paste option...done
Edit:excuse me, i didn't read the title(No paste menu item on phone dialpad )sure you know my option.Sorry
Nevermind, but no one got idea?
nuclear_1000g said:
hi man:
no, actually even i copied something like a phone number, this item still not exists. my rom version is 1.35.707.3 WWE, it's official.
Click to expand...
Click to collapse
Hm... nobody seems to get it - What Nuclear says is that there is no PASTE option in the phone keypad view. Used to be there on my TyTN, now it's gone!! Anybody know how to get it back?
I re-raised this issue here yesterday...
http://forum.xda-developers.com/showthread.php?t=407216
It seems to have been an issue with the Diamond from the start, but no one seems to know how to enable pasting directly onto the dialer.
I think it's time HTC addressed this, as in my book it's a serious ommission.
I'm interested in a quick straw poll of Diamond users out there for whom this is an important issue?
If there's enough response, perhaps we can bring it to the attention of HTC.
Phone -> Menu -> Paste doesn't work?
pedmond said:
Phone -> Menu -> Paste doesn't work?
Click to expand...
Click to collapse
Phone -> Menu -> Paste doesn't exist!
Perhaps the ROM you're using has the paste as an option here?
Perhaps also this is the reason that more of you aren't jumping up and down over this as it's perhaps ok on some versions. I've got a UK Orange with 1.37.405.1 WWE, and the more I hit times I need this feature the more wound up I'm getting about it.
I also don't have that option on my UK Orange Diamond, not really had to use it though.
It would seem that it has been fixed in .93; could some of you with standard .93 confirm this for sure?
If confirmed, it'll spur me on to flash an upgrade. Also if confirmed, could any of the more technically minded work out if it's a registry tweak, or a software re-write/upgrade.
TIA
studz said:
Phone -> Menu -> Paste doesn't exist!
Perhaps the ROM you're using has the paste as an option here?
Perhaps also this is the reason that more of you aren't jumping up and down over this as it's perhaps ok on some versions. I've got a UK Orange with 1.37.405.1 WWE, and the more I hit times I need this feature the more wound up I'm getting about it.
Click to expand...
Click to collapse
Humm, I'm using the official ROM. Weird! I even used the Paste option a few times.
studz said:
It would seem that it has been fixed in .93; could some of you with standard .93 confirm this for sure?
If confirmed, it'll spur me on to flash an upgrade. Also if confirmed, could any of the more technically minded work out if it's a registry tweak, or a software re-write/upgrade.
TIA
Click to expand...
Click to collapse
Official vodafone UK 1.93.161.2 upgrade had the PASTE in the menu.
Previous 1.37.161.2 did not have it.
It may be due to HTC phone skin? Newer version has the menu option. Older version does not.
OR, may be due to code base 1.93.xxx.x has the option and previous code bases don't?
??
Thanks, mystery solved. So paste was obviously added as an option in the menu to .93. I can feel an upgrade coming on... just need some time to fit it in.
pedmond said:
Phone -> Menu -> Paste doesn't work?
Click to expand...
Click to collapse
oh man, actually this item "Phone -> Menu -> Paste" even doesn't exists.
[Q] Paste in dialer
No, i haven't put shoe shine between my hardware keys.
What I really would like to find out is whether anyone has adressed the COMPLETELY INEXPLICABLE lack of a paste menu item in the dialer context menu? This is such a basic feature I can't believe they left it out!
Saw this issue in a search but there was never any conclusion.
Is this perhaps adressed in any ROMs?
Is there a registry setting?
Anyone?
Did you not read what's been just posted above?
Upgrade your rom to a 1.93 variant, and you should have it.
studz said:
Did you not read what's been just posted above?
Upgrade your rom to a 1.93 variant, and you should have it.
Click to expand...
Click to collapse
Yeah, yeah. Sorry, it's been (and still is) a loooooong haaaaaard work day.
LazPL said:
No, i haven't put shoe shine between my hardware keys.
What I really would like to find out is whether anyone has adressed the COMPLETELY INEXPLICABLE lack of a paste menu item in the dialer context menu? This is such a basic feature I can't believe they left it out!
Anyone?
Click to expand...
Click to collapse
Welcome to the HTC Touch Diamond - home of many illogical choices and omissions of basic features
I've got Diamond Project 3.3 and no paste in the menu
It seems that diamond project is based on 1.93 but no paste option...
Any idea

Bugs and fixes for TF3D (Landscape) centralize discussion

Since we don't have a common source of this new TF3D and every cooks have it's own implementation. I think it's better to centralize the bugs and fixes discussion to collects all the brain power/knowledge here to get this puppy stabilize.
Current base: TF3D2 from Topaz rom
Read the following rules before you filed a bug:
This thread is not about how to install TF3D and assume you got TF3D installed and working
This thread is intended to get TF3D working as what it should be. Go somewhere else for Mod/Customization, and how to do this and that.
Make sure you got Opera 9.5 installed as many features rely on it.
Read the existing list first before you file a new one.
Only report reproducible bug w/ details/steps to reproduce (Don't report any random crash/bug that you cannot even reproduce it)
You are welcome to report any existing bug that is not happening on you so that we could look into the diffs
Fixed Bug list (fixes in the attached zip file):
TF3D show HTC logo but won't start: Missing htcDutils.dll
Camera button don't start: Use the Camera package from Rhodium
"My contact card" in setting is not working / call history crash ..etc: Missing httpclient.dll
"Use Camera" in "Edit Contact Card" brings up video recording instead of picture taking: Set HD Camera Apps as the default camera apps.
"Sim card not ready" error for SMS message (call history > call entry > Messages tab): Missing CommManagerDll.dll
"Key Lock" status is not saved after soft-reset. Fixed w/ latest Rhodium packages (don't remember exactly which). Current workaround is change it in registry.
Existing bug list:
Sms reader tab can show only 25 messages (I cannot confirm it since I don't have that many SMS msg)
TF3D Panel is not working. PM Pubba already to see if he could help
bug in itje 4.0 beta 3
- call history crashes almost all time
- "all people" crash after 1 swipe down
are ok in your rom?
guap said:
bug in itje 4.0 beta 3
- call history crashes almost all time
- "all people" crash after 1 swipe down
are ok in your rom?
Click to expand...
Click to collapse
I don't have this issue. I bet it's the missing httpclient.dll
httpclient? Can you share this file? I have the same issues as itje in my rom
http://forum.xda-developers.com/showthread.php?t=486582
edit:thx, found by myself but it doesn´t work. I just copied it to the windows folder, let´s see if there´s a change by cooking it in but I think it won´t help. Maybe there´s a missing reg key or sth. like this.
@guap
What do you mean by swiping down? The contact pictures in TF3D? I don´t have this issue, only the issues in the call history tab.
jackleung said:
I don't have this issue. I bet it's the missing httpclient.dll
Click to expand...
Click to collapse
yes, I found the refrence to this too..
But I have not yet found what cause the weather not to show up on calendar tab "today" tab
any one?
Hmm weather shows up in weather tab on my rom. Did you set your city in the clock settings area? I think thats what causes it to work
weather shows up in your B3 as well Itje.
It's set exactly as Bxsteez says, you have to change the location in the clock..
I can not get it to change to farenhiet though. Oh well something is better than nothing
Bxsteez said:
I can not get it to change to farenhiet though. Oh well something is better than nothing
Click to expand...
Click to collapse
nto much of an issue here, we use both F and C, often at the same time!
fards said:
weather shows up in your B3 as well Itje.
It's set exactly as Bxsteez says, you have to change the location in the clock..
Click to expand...
Click to collapse
lol, typical
sometimes you work so much to find a sollution that you are looking to deep into it, and not seeing the easy one right before your eyes...
Camera button don't start: Use this (rename 2 files from cameraHD to camera), or camera.exe provided by Itje
Click to expand...
Click to collapse
Quick question on this. This is for the camera button in the pictures tab or the hardware camera button?
itje said:
lol, typical
sometimes you work so much to find a sollution that you are looking to deep into it, and not seeing the easy one right before your eyes...
Click to expand...
Click to collapse
Yeah sorry I didn't even realise it was a problem that one, until I saw this thread as I was playing with it earlier on today, I presumed it was common knowledge.
BXsteez, I think that's for the camera button in the photos tab.
So the camera application is called camerarunner.exe and i should rename camera.exe to camerarunner.exe
jackleung said:
"Use Camera" in "Edit Contact Card" brings up video recording instead of picture taking
Click to expand...
Click to collapse
What about this one? Do any of you encounter this or not?
Bxsteez, that's right. U can rename Skype.exe to camera.exe to have it called Skype instead in the Photo & Camera tab.
Ok cool. I have another little thing i want to do if someone can make me the cab.
If i'm reading the files in the keyboard package correctly we can actually edit how the keys are mapped and how hardware recognizes them. There is a file that is called et9.rhodium.wwe.kmap.txt that basically seperates each row of keys and tells u what happens when u press the funciton key. If someone still has the keyboard cab that was removed we can test out my theory.
**EDIT**
I found the cab and it looks like i was right. We might have a nice keyboard fix coming soon.
itje said:
yes, I found the refrence to this too..
But I have not yet found what cause the weather not to show up on calendar tab "today" tab
any one?
Click to expand...
Click to collapse
Can you share your solution?Is it the .dll that jack mentioned?
@jack
Yeah I got the same camera issue
it was very simple: select YOUR city (and not "local" in new clock tab
Bxsteez said:
Ok cool. I have another little thing i want to do if someone can make me the cab.
If i'm reading the files in the keyboard package correctly we can actually edit how the keys are mapped and how hardware recognizes them. There is a file that is called et9.rhodium.wwe.kmap.txt that basically seperates each row of keys and tells u what happens when u press the funciton key. If someone still has the keyboard cab that was removed we can test out my theory.
**EDIT**
I found the cab and it looks like i was right. We might have a nice keyboard fix coming soon.
Click to expand...
Click to collapse
How are you coming with this?
If this works with the latest Jerpelea Kitchen then I am happy to try tweak it to work.
Let me know, Kodiak
Bxsteez said:
Ok cool. I have another little thing i want to do if someone can make me the cab.
If i'm reading the files in the keyboard package correctly we can actually edit how the keys are mapped and how hardware recognizes them. There is a file that is called et9.rhodium.wwe.kmap.txt that basically seperates each row of keys and tells u what happens when u press the funciton key. If someone still has the keyboard cab that was removed we can test out my theory.
**EDIT**
I found the cab and it looks like i was right. We might have a nice keyboard fix coming soon.
Click to expand...
Click to collapse
have you seen my posts on this?
guap said:
it was very simple: select YOUR city (and not "local" in new clock tab
Click to expand...
Click to collapse
Thx mate, but I mean the contact tab which makes some problems. Itje said, that he fixed this issue.

Categories

Resources