Database Develop

Oracle PushMailClient Install Failure on WM6.1

My work uses Oracle PushMailClient, however I'm unable to install this on any WM6.1 ROM either on the Device or on the Storage Card. Tried a few Dutty flavors, and now L26's latest. No dice. Keep seeing the following in the generated log:
2008/05/08 10:43:13:000 [Thread: 0000000079183310] PIMAPSetup:llMain>>> DLL_PROCESS_ATTACH: [RELEASE] Build at Jun 3 2007 10:38:58 PST.
2008/05/08 10:43:13:000 [Thread: 0000000079183310] CreateToolhelp32Snapshot failed. Error [8] at ..\..\..\src\common\Win32Util.cpp:291
2008/05/08 10:43:13:000 [Thread: 0000000079183310] Formatted Error Message: Not enough storage is available to process this command.
2008/05/08 10:43:13:000 [Thread: 0000000079183310] Unable to kill PIMAPMonitor.
There is PLENTY of space on this Device, and on the Storage Card. I know some folks around here have had no trouble installing this on WM6.0. Do I need to drop back to WM6.0 too? Hope not. Thanks for any pointers.
UPDATE: My mistake, this will not install on the Tilt even at WM6.0. Must be a Tilt (or Kaiser?) specific issue. My coworkers have successfully installed this on Wizards using WM6.0. Some sort of C Interpreter difference? (way above my head, so apologies if that sounds dumb).
G.

You should try to configure your client to use IMAP4 for WM6.x.
There is a link on how to do this (pass Oracle firewall):
http://itsource.oraclecorp.com/owc_wiki/page/show.jz?page=PushMailSmartPhone

NET CF Initialization Error: - 2147483647 (80000001)

I was syncing my phone wirelessly and something failed and now I have a bunch of garbled files folders on my storage card and every time I try to start an app, I get the above message. Also, the Bluetooth syncing thingie doesn't work, it starts syncing but the connection fails.
Is there a fix for this? I don't want to reflash my phone again.

Got the same problem, anyone ?

Uninstall .NETCF 3.5 from ROM
Hi,
I have problem with .net cf 3.5.9198.0(ROM) which gives me error "Microsoft.Windowsmobile.forms, version=1.0.0.0, culture=neutral, publickeytoken=31BF3856AD364E35, or one of its dependencies was not found" running application required the .net cf.
How to uninstalled it from the ROM and install the previous version?
WM6.5 CE OS5.2.23034 (Build 23034.5.3.0).
Anybody have the same problem? Please help.
Its my 1st WM.

i had the encountered the same problem and i have no choice but hardreset

Error with Microsoft windows mobile directx! or .NET compact?

Hi, i installed B4PJS AYCE 6.5 21812**Fully Loaded** ROM on my Raphael yesterday and so far i'm impressed.
But when i'm starting Diamond Hologram or another 3Dprogram i get this errormessage:
"File or assembly name 'Microsoft.WindowsMobile.DirectX, Version=3.7.0.0, Culture=neutral, PublicToken=969DB8053D3322AC', or one of its dependencies, was not found"
And a Quit button down to the right.
when i push Quit, this message pops up:
".NET CF Initialization Error
The application failed to load requierd components. If the .NET Compact Framework is installed on a storage card, please ensure that this card is in place and launch the application again. If this fails, a re-installation of the .NET Compact Framework is recommended. Support info: -2147483643 (80000005)"
Ive tried to download the lastest CF from microsoft and innstalled that. did it twice and it installs fine with no errors.
If i run \windows\cgacutil.exe on the phone it says that i have [3.7.8345.0, 3.5.7283.0] installed.
I aslo think that the TouchFlo3D is a bit slow. :/
Anybody else got this problem? anyone got any tip on what to do?

i have this problem any ideas

[Q] Kies won't install -> help me please

Hi
Win XP SP3
If I download kies (~132mb) from samsung and try to install, then part way through i get the error c:\documents...\temp\KiesInstall5\externalfile\dotnetfx35_x86.exe is not a valid 23bit application.
If I proceed to install .net 3.5 the installer still throws the exact same wobbly. I checked in control panel, and net 3.5 is definitely listed as being installed.
If I try to install kies via the included CD, i get a dialog box that sez
*****
Install .net 3.5 framework
Drive E:\
OK | CANCEL
****
No other options, I can't browse to different locations or select other drives. The only option is "E:\" which is the cdrom drive. If I click OK, then it just re-asks the same question, if I click cancel then installation is aborted.
***
Can anyone help?

I figured it out, the phone comes with 2x mini CDs labelled "Disk 1/2" & "Disk 2/2" when it asks for .NET you have to change to "Disc 2/2", the CD doesn't mention that it contains .net 3.5 I only released when I started browsing the file contents of both CDs. I'd just like to say,
Samsung you suck!

ok, so now it goes a bit further and get's stuck on
"installation of wmp 11 failed"

Had the same .net issue, and never got around to fixing it. Used it on a different laptop and it worked.

Yep, have same problem here with no .NET valid install.
Dont seem to be able to fix it either?

did u try installing of the CDs, and when it asks for .NET insert CD#2?

[Q] X1i HardSPL Error 262

Hi,
I cannot flash 0.78.OliNex Hard-SPL on my new X1i: The progress bar stays at 0% until the timeout, then Error 262. I tried everything (no sd-card, no sim, hard reset, compability mode etc.), no avail.
My new X1i has the image version 1.05.932.7 (03/24/09), the bootloader reads:
KOVS110
SPL-0.78.0000
MicroP1-787
MicroP2-707
The type is AAD-380001-BV.
Radio is 1.14.25.55, protocol 52.65.25.34J, extended protocol 1.0.11809.7229.
Software ID is 1213-6439, version R3AA007, user id 1215-3303, user version R15A, content version PA10.
I noticed that the installed WME 6.1 is modified compared to the old X1. In particular, during my first attempt, a WM6.1 warning message with a red boundary popped up, indicating that proceeding could harm the phone (yes/no). I checked yes, and since then, the message does not come up anymore. Probably the ROM is not in Olis compatibility list, so I looked for unsigned HardSPL, but found only the Image Version 1.00.Diamond, so I did not flash it (probably it would brick my X1i). Any idea would be very much welcomed, I want to get rid of WM6.1 and flash WM6.5.3.
Thanks a lot for any hints.
BTW, I've posted this thread alredy in the X1 General forum and realised only now that this forum might be a better choice, sorry for that.

Next try
Hi,
I found the recommendation below and tried, but no avail as well.
Does anyone know an unsigned HardSPL by Oli for the SE X1?
Any help appreciated.
_________________________________________
xidesu
3rd August 2010, 09:33 PM
Default HTC Touch Pro, Fuze HardSPL Error 262 FIX
Alright, this is how i fixed my 262 error after ripping out all my hair for a week.
- Plug your phone into any working usb port (make sure Active sync is up and running)
- Run RaphaelHardSPL-Unsigned_190_1_3.exe and on the first screen pop up, 9 files will be created in the directory you run the .exe from.
- Copy these 9 files to another folder because you will be clicking cancel on the pop up which will in turn erase the 9 files it created.
- Click cancel on the pop up.
- Go to the folder in which you copied these 9 files to.
- Run ROMUpdateUtility.exe and the same screen pop will appear as before.
- Follow the prompts and it should work.

don't flash bootloader-stuff from other devices, never! Oo
try flashing hardspl 0.72 via usb first (the old one), then flash 0.78 as an "update".

Next step, but still not working
Well, I was able to flash APP_SW_X1i_GENERIC_UK_1213-6450_CDF1215-1832_KOV_R1AA017
from the SD card, and I have now SPL0.72.0000 on my X1.
ROM Version:1.02.931.3
Date: 08/29/08
Radio: 1.06.25.29
Protocol: 52.43.25.24U
Software ID: 1213-6450
Version: R1AA017
However, X1_HardSPL still terminates with Error 262 as before. Flashing OliNex's HardSPL via SD card (RUU_Signed.nbh renamed to kovsimg.nbh) does not work either. I still cannot flash my Dynamics GTX 2.3.5 GER ROM.
Any ideas?
BTW, I tried with a desktop and a laptop, both XP SP3 and Active Sync 4.5 on various USB ports. I disabled Security Options via X1_Tweaks. Everything seems to work, only flashing HardSPL still fails.
At least, I am a step back now ;-)

Bingo!
I succeeded. The solution has been:
- Establish an Active Sync connection via USB.
- Copy the file Xperia-SSPL-Manual.exe to the root directory of a FAT32-formatted SD card (no SDHC, an elder one). SSPL-Manual is the basic part of OliNex bootloader.
- Unpack HardSPL by starting it or use RUU_Kovsky files in a directory of the PC hard disk. Make sure that the proper RUU_Signed.nbh file is in this directory (the HardSPL image by Olimex in the version you whish to complete the basic SPL started onthe X1)..
- On the X1, open the file manager and start Xperia-SSPL-Manual.exe by clicking on it. The X1 switches to the boot loader mode indicating HardSPL 0.52 by OliNex.
- On the PC connected to the X1, start ROMUpdateUtility.exe.
In my case, the flashing went very quickly to 100%, and I have now HardSPL0.78OliNex on my X1. Now I can proceed (Task29, image flashing). At least I hope so.
My assumption about the the problems I faced: My X1 had a quite recent firmware which probably blocked any change of the SPL and allowed only generic signed images to be flashed, no cooked ones. Xperia-SSPL-Manual.exe bypasses this lock by applying an OliNex cracked routine, thus allowing to overwrite the SPL. At least I think so.

Done.
My Dynamics GTX 2.3.5 GER ROM is now up and running. THX a lot for the great support of this forum!

Thanks for instructions I have same problem with my X1.

You're welcome.
It has been worth the troubles - the Dynamics ROM is great, and until now, I found no hickups.