Database Develop

Oracle PushMailClient Install Failure on WM6.1

My work uses Oracle PushMailClient, however I'm unable to install this on any WM6.1 ROM either on the Device or on the Storage Card. Tried a few Dutty flavors, and now L26's latest. No dice. Keep seeing the following in the generated log:
2008/05/08 10:43:13:000 [Thread: 0000000079183310] PIMAPSetup:llMain>>> DLL_PROCESS_ATTACH: [RELEASE] Build at Jun 3 2007 10:38:58 PST.
2008/05/08 10:43:13:000 [Thread: 0000000079183310] CreateToolhelp32Snapshot failed. Error [8] at ..\..\..\src\common\Win32Util.cpp:291
2008/05/08 10:43:13:000 [Thread: 0000000079183310] Formatted Error Message: Not enough storage is available to process this command.
2008/05/08 10:43:13:000 [Thread: 0000000079183310] Unable to kill PIMAPMonitor.
There is PLENTY of space on this Device, and on the Storage Card. I know some folks around here have had no trouble installing this on WM6.0. Do I need to drop back to WM6.0 too? Hope not. Thanks for any pointers.
UPDATE: My mistake, this will not install on the Tilt even at WM6.0. Must be a Tilt (or Kaiser?) specific issue. My coworkers have successfully installed this on Wizards using WM6.0. Some sort of C Interpreter difference? (way above my head, so apologies if that sounds dumb).
G.

You should try to configure your client to use IMAP4 for WM6.x.
There is a link on how to do this (pass Oracle firewall):
http://itsource.oraclecorp.com/owc_wiki/page/show.jz?page=PushMailSmartPhone

Help >:(

yo
I recently got a HTC TyTN II that has already been modded. This is my first WM phone. It currently has CE OS 5.2.19588 (build 19588.dutty's WM6.1) installed and I would like to update it to dutty's newest rom.
But when I try to run the rom I get the following error:
The application failed to load required components.
If the .NET Compact Framework is installed on a storage card, please ensure that this card is in place and launch the application again. If this fails, a re-installation of the .NET Compact Framework is recomended. Support info: -2147483643 (80000005)
So in response to that I try to install .NET CF 3.5 and receive the following error:
installation error. stop all applications and processes, maximize available storage space, and run installation again. Support info: 3
I have tried a hard reset, renaming mscoree.ddl to mscoree.dll.txt and no luck. I have used the .msi loader and the .cab files.
Any help would be appreciated.

h3nno said:
yo
I recently got a HTC TyTN II that has already been modded. This is my first WM phone. It currently has CE OS 5.2.19588 (build 19588.dutty's WM6.1) installed and I would like to update it to dutty's newest rom.
But when I try to run the rom I get the following error:
The application failed to load required components.
If the .NET Compact Framework is installed on a storage card, please ensure that this card is in place and launch the application again. If this fails, a re-installation of the .NET Compact Framework is recomended. Support info: -2147483643 (80000005)
So in response to that I try to install .NET CF 3.5 and receive the following error:
installation error. stop all applications and processes, maximize available storage space, and run installation again. Support info: 3
I have tried a hard reset, renaming mscoree.ddl to mscoree.dll.txt and no luck. I have used the .msi loader and the .cab files.
Any help would be appreciated.
Click to expand...
Click to collapse
You need to read here:
http://forum.xda-developers.com/showthread.php?t=433835

NET CF Initialization Error: - 2147483647 (80000001)

I was syncing my phone wirelessly and something failed and now I have a bunch of garbled files folders on my storage card and every time I try to start an app, I get the above message. Also, the Bluetooth syncing thingie doesn't work, it starts syncing but the connection fails.
Is there a fix for this? I don't want to reflash my phone again.

Got the same problem, anyone ?

Uninstall .NETCF 3.5 from ROM
Hi,
I have problem with .net cf 3.5.9198.0(ROM) which gives me error "Microsoft.Windowsmobile.forms, version=1.0.0.0, culture=neutral, publickeytoken=31BF3856AD364E35, or one of its dependencies was not found" running application required the .net cf.
How to uninstalled it from the ROM and install the previous version?
WM6.5 CE OS5.2.23034 (Build 23034.5.3.0).
Anybody have the same problem? Please help.
Its my 1st WM.

i had the encountered the same problem and i have no choice but hardreset

Touch screen not working in shift

I have Installed windows 7 in my shift and evrey thing is working fine except the touch screen it,s not working
i have followd the instruction but still didn't work
any one can help me to make it working
regards

Try this Guide http://gadgetmix.com/index/how-to-install-windows-7-on-htc-shift-umpc/
The touchscreen does work on the Windows Mobile side, right?

khals said:
Try this Guide http://gadgetmix.com/index/how-to-install-windows-7-on-htc-shift-umpc/
The touchscreen does work on the Windows Mobile side, right?
Click to expand...
Click to collapse
thanks i got it working but i got another problem
if i update the display driver i get the blue screen and it keep on rebooting automaticly
any solution for this
regards

That's because AERO doesn't run at the moment at screen resolutions higher than 800*600.
Boot into SAFE MODE - Delete New Installed Graphic Card Drivers - Enable Windows 7 Classic theme in Windows and Reinstall drivers!

Can someone PLEASE reply ?
I am desperate. I deleted the HPA Partition in order to free up 3Gigs and installed Windows 7.
I followed all the tutorials, so i installed ECDriver (Vista Compatibility Mode + Run as Administrator) and Touch Screen Driver.
I mention that i see HTC Embedded Controller (in device manager) after installing ECDriver , but touch screen doesnt work (after installing touchscreen drivers) = No Pen or Touch Input is available for this Display
What am i doing wrong ?!?

I also had the same problem, so, I've installed the VGA driver from the package the way mentioned somewhere here and in the same order, as I think the new VGA driver installed with the Win7 installation is missing an important bit at the end of the installation. After that, and after a reboot, the touch started, but I did not get a calibration screen. Even without the calibration, the screen seemed to be fine. I've also disabled Aero just in case as I did not want any more blue screens.

So you have installed ECDriver, Touchscreen and VGADriver (WinVista Compatible & Run as Administrator) in this order ?
When i install VGADriver, i get a 'Cannot copy'. I thought the driver was corrupt and tried re-downloading it, but this didn't solve the situation.
How did you manage to install it ?!?

First I've installed just touchscreen driver and it did not work, so I've installed EC driver and then touchscreen and it also failed. So, I've added the VGA. I think it did not want to install with Vista compatibility so I think I forced it through with XP compatibility, got a message saying the driver was older than what I had installed, I said yes, please, go ahead! It then installed and at the end some CMD windows poped up and then closed and I then installed touch screen again. Nothing seemed to have happened then, so I've restared the computer, had all my fingers crossed (very, very technical!) and voilá, touch screen was there.

Thanks for the support. I tried several times, following exactely your steps, but i didn't manage to make it functional.
Unfortunately I had to go back to Windows Vista.
Now i have Windows 7 Vista Ultimate SP2, instead of the preistalled Windows Vista Business OEM.
Althought it's running ok, i am waiting for the final version of Windows 7 (not the RTM that i tried installing).
Win7 installed = 7 GB, Windows Vista Ultimate = 14 GB :|

Hi
Sorry to hear that it did not work for you. Like I~ve mentioned elsewhere, the only thing that did not work for me all the way is the sd card that keeps dropping from explorer.
Did I mention that I did not do a clean install? I've installed it as an upgrade and had all the functions (Wifi, BT, Phone) on while upgrading to avoid the problem some people have of the wifi connection going missing when upgrading(W7)/downgrading(XP). I've been busy at work so did not have time to use it much or test it some more.

Well, you missed to mention that
I tried a fresh install, after deleting the HPA partition (now i have 37GB Hdd, instead of 33).
Maybe that's why it didn't work for me...
A friend of mine gave my his Shift to try installing Win7 via Upgrade. Maybe it works.
BTW : Windows 7 Ultimate SP2 is running just perfect on Shift. Too bad it occupies 20GB (after drivers and updates)

[Q] Kies won't install -> help me please

Hi
Win XP SP3
If I download kies (~132mb) from samsung and try to install, then part way through i get the error c:\documents...\temp\KiesInstall5\externalfile\dotnetfx35_x86.exe is not a valid 23bit application.
If I proceed to install .net 3.5 the installer still throws the exact same wobbly. I checked in control panel, and net 3.5 is definitely listed as being installed.
If I try to install kies via the included CD, i get a dialog box that sez
*****
Install .net 3.5 framework
Drive E:\
OK | CANCEL
****
No other options, I can't browse to different locations or select other drives. The only option is "E:\" which is the cdrom drive. If I click OK, then it just re-asks the same question, if I click cancel then installation is aborted.
***
Can anyone help?

I figured it out, the phone comes with 2x mini CDs labelled "Disk 1/2" & "Disk 2/2" when it asks for .NET you have to change to "Disc 2/2", the CD doesn't mention that it contains .net 3.5 I only released when I started browsing the file contents of both CDs. I'd just like to say,
Samsung you suck!

ok, so now it goes a bit further and get's stuck on
"installation of wmp 11 failed"

Had the same .net issue, and never got around to fixing it. Used it on a different laptop and it worked.

Yep, have same problem here with no .NET valid install.
Dont seem to be able to fix it either?

did u try installing of the CDs, and when it asks for .NET insert CD#2?