Related
Anyone heard if this is possible?
Hmmm...I'm interested in that too!
I saw a repack of the requisite files floating around elsewhere - I might give installing it a shot and see what happens.
Worst case is it hard resets my device or shoots freaking laserbeams across the house, hitting my brother's girlfriend, which at the moment I would consider a useful feature...
culd some one post a picture of it running on treo 750 ?
what means touchflo? .. give me link or explanation.. thx
vasek said:
what means touchflo? .. give me link or explanation.. thx
Click to expand...
Click to collapse
check out the HTC Touch
I think with the touchflo interface, the 750v would be near perfect!
That being the case, gimme it please
Simmiter....if you get hold of it and make it work...can you post a few pics and give a comment on your expedition?
Cheers
motorwayne
justin_stuckey said:
Anyone heard if this is possible?
Click to expand...
Click to collapse
I went ahead and install the 5 tab htc today plugin and played around with it. Their seems to be a stability problem as the treo now would randomly reboot itself. I tried installing it after a hard reset and it seems okay but started rebooting again after installing my apps. got rid of it for now... hehe
just installed the 6 tab htc home no trouble so far awaiting the probs though
hey guys i heard that the 3 tab works with our 750...i heard it somewhere in the touch threads...btw id we install it, with a simple uninstall and a soft reset, will it get everything back to normal??? or a hard reset is what we have to do to get it normal again...btw where are you guys d/l'ing the touchflo for the 750 from???links please...
hey I have actually installed it on my Treo its loads with no probs. However there are a couple of conflicts like not being able to access the dial pad or call log via the call button. I have even experienced this error while clicking on call log or dial pad. After a little research I found it to be a conflict between the htc home and palm software. Simply clinkin on the left hand corner to initiate the x button pop up I can then click on both the call log as well as the dial pad with out a problem. As for the touch flo cube it does not fit the entire screen, I assume this to be just be the treos 240x240 screen. I also noticed the cube to be slow in it's revolving. If we can get past the conflicts and adapt the program to the treo's screen its possible we might even get it to run as smooth as it does on the artemis. I am shocked at the few interested in advancing such a feature on the treo. I am sure once the cooked roms start to surface we can truly unlock the power of the device.
which touchflo program did you load and where did you get it?
Issues...
Another issue with the Touch Flo Home on the Treo 750, is that the green and red button don't work correctly anymore...
Normally, when you press the red button, the device go to sleep mode, that don't work anymore...
When you press the green button, you don't have the menu with the last call...
That's very annoying for my part...
So I uninstall the Touch Flo Home. Try with the Kaiser's Version and have the same issue...
Touchflo on the Treo 750
Does anyone know how to contact PDAViet? He would be our best option. He may be kind enough to make a rom for the 750 ?? Holding my breath ...
TouchFLO and HTCHome are two very different things.
zeek112 said:
TouchFLO and HTCHome are two very different things.
Click to expand...
Click to collapse
Can someone send me the File for both TouchFLO or HTCHome? Thanks.
I'd like the link to the CABs of the Touchflo and/or HTC Home that anyone has working on the 750.
Thanks in advance.
[email protected] said:
Another issue with the Touch Flo Home on the Treo 750, is that the green and red button don't work correctly anymore...
Normally, when you press the red button, the device go to sleep mode, that don't work anymore...
When you press the green button, you don't have the menu with the last call...
That's very annoying for my part...
So I uninstall the Touch Flo Home. Try with the Kaiser's Version and have the same issue...
Click to expand...
Click to collapse
I installed the 6 Button Kaiser HTC home plugin on my Treo 750 and have no problems with it @ all. As for the green and the Red buttons, all u have to do is add the "Dial Lookup" to the Today screen and the green and red buttons will work perfectly.
HTC Home and TouchFlo are 2 totally different things. HTC Home is the Today Screen plug-in, TouchFlo is the 3D cube, finger scrolling etc which was 1st introduced in the HTC Touch phone.
trjons said:
I'd like the link to the CABs of the Touchflo and/or HTC Home that anyone has working on the 750.
Thanks in advance.
Click to expand...
Click to collapse
HTC Home
http://forum.xda-developers.com/showthread.php?t=327646&highlight=6+tab+htc+home
HTC TouchFlo is not as easy as just a cab to install. TouchFlo needs to update files on the device that can't be changed will the OS is running, n that's why TouchFlo has to be cooked in the ROM
Ok....
With Dial Lookup checked, the red and green buttons work! Thanks for that.
The problem now is that there is wasted screen real estate below the Kaiser plugin for the network carrier logo.
Hidelogo causes resets so don't bother.
and if you try to type contacts by name they go off the bottom of the screen. is there a way to use the screen better?
Hi everyone,
In order to install SPB Mobile Shell 2, to test, I wanted to prevent TF3D from launching at each startup. I know there is a way ot desactivate it but will it remove the program from the memory ?
Does anyone has an idea ? I took a look on google but did not see anything.
Thanks for your help.
Start>Settings>Today>Elements>untick TF3D......it´s just another today plugin. BTW TF3D runs fine with MS2.1 on my Diamond.
Nevertheless I have TF3D now disabled - to much of a memory hog. Back to PocketBreeze, BatteryStatus and SPB PhoneSuite together with MS2.1.
djspank said:
Hi everyone,
In order to install SPB Mobile Shell 2, to test, I wanted to prevent TF3D from launching at each startup. I know there is a way ot desactivate it but will it remove the program from the memory ?
Does anyone has an idea ? I took a look on google but did not see anything.
Thanks for your help.
Click to expand...
Click to collapse
Do this to completely avoid TF3D
1. Hard Reset your Diamond (backup before of course)
2. After setting Time Zone and PIN, you see the "3 second" warning for installing HTC apps. Hit the RED soft reset button before the end of the 3 seconds to reboot. After reboot, you now have a clean WM6.1 without TF3D.
X. To bring back TF3D, just do another Hard Reset and let the TF3D install.
I do this myself and have clean WM6.1 with SPB Mobile Shell 2.1
Now I don't have the Blue-Tooth problem (due to TF3D Music Player)
And seems more memory to use than with TF3D
webmice said:
Do this to completely avoid TF3D
1. Hard Reset your Diamond (backup before of course)
2. After setting Time Zone and PIN, you see the "3 second" warning for installing HTC apps. Hit the RED soft reset button before the end of the 3 seconds to reboot. After reboot, you now have a clean WM6.1 without TF3D.
X. To bring back TF3D, just do another Hard Reset and let the TF3D install.
I do this myself and have clean WM6.1 with SPB Mobile Shell 2.1
Now I don't have the Blue-Tooth problem (due to TF3D Music Player)
And seems more memory to use than with TF3D
Click to expand...
Click to collapse
Oki, It seems a little bit hardcore but why not, I will try this.
Thanks for your help
Hi, i just got my diamond yesterday it hanged because i am a newbie and tried several things i do not understand and it suddenly hanged.
I tried the reset it by the small red button, and everthing seems to work fine. Howerever i am now not able to see the Big Digital Clock on the Home page. Pls.. advise on what to do.
I am thinking of doing a hard reset, but i do not know how... What are the risks on doing this and how to do it correctly.
Thank you...
What do you see instead? Nothing? Small clock? Bit more info would be useful....
Hi there
Does anyone else use SPB Pocket Plus (latest version V4.0.2 - Dec 07) and WM6.1 and suffer the annoying problem where the today plugin icons don't pickup correctly after a reset?
It's easily fixed by clicking to refresh all tabs, but surely it shouldn't do it???
I'm also suffering a problem whereby not all text messages are received by my phone. (I posted in the General section with no joy - am hoping that you software guys may know if something conflicts?!) It's very strange as the phone lights up as if a text is coming through, then nothing happens. I've tried a Hard Reset and restore to no avail.
Wierd thing is, my mate has a Kaiser on Vodafone UK (V1615) running WM6.0 and he has the same problem - I'm on O2-UK so it's not a carrier problem.
I set his Kaiser up for him with much the same software as mine, including SPB PocketPlus V4.0.2...
I also (I know, I'm sorry!) have a problem with the today screen if I change things... For example, if I change the backdrop via Pictures and Video's, more often than not the phone will hang requiring a stylus reset. Am wondering if this is SPB PocketPlus related???
Any idea's? (Sorry about the multi questions!!)
Cheers
sorry about the double post!
p.dixon0 said:
Hi there
Does anyone else use SPB Pocket Plus (latest version V4.0.2 - Dec 07) and WM6.1 and suffer the annoying problem where the today plugin icons don't pickup correctly after a reset?
It's easily fixed by clicking to refresh all tabs, but surely it shouldn't do it???
I'm also suffering a problem whereby not all text messages are received by my phone. (I posted in the General section with no joy - am hoping that you software guys may know if something conflicts?!) It's very strange as the phone lights up as if a text is coming through, then nothing happens. I've tried a Hard Reset and restore to no avail.
Wierd thing is, my mate has a Kaiser on Vodafone UK (V1615) running WM6.0 and he has the same problem - I'm on O2-UK so it's not a carrier problem.
I set his Kaiser up for him with much the same software as mine, including SPB PocketPlus V4.0.2...
I also (I know, I'm sorry!) have a problem with the today screen if I change things... For example, if I change the backdrop via Pictures and Video's, more often than not the phone will hang requiring a stylus reset. Am wondering if this is SPB PocketPlus related???
Any idea's? (Sorry about the multi questions!!)
Cheers
Click to expand...
Click to collapse
As far as the PocketPlus, I am using it and I haven't had a problem at all with the icons or anything else for that matter. I haven't had any problems with the txt msgs either. You may need to reset the mms server?? I don't know about that, I just remember reading about it in another thread somewhere... As for the backdrop change, that's not a pocket plus related conflict. I am not sure what else you have installed, but I have changed mine multiple times in the past 2 days and haven't had a single problem or anything that told me I had reset or that I needed to soft reset the phone. I would suggest unistalling the Pocket Plus and reinstalling it. I know that I have had to do that before because of one of the other SPB proggies i used had changed some values in the registry for it. Otherwise, I would contact SPB, they would know how to fix it. Unless you didn't purchase it...
Hi Killerbeans!
I'v tried uninstalling and re-installing a couple of times to no avail unfortunately
The only other things I have installed (all bought and paid for!) that startup with the phone are SKTools (set to performance optimisation) and Kasperski AntiVirus...
I might try uninstalling those and SPB and reinstalling them one by one...
Cheers for the response though!
I have been havng the spb problems since 6.1 installation as well (I am with AT&T in the US, original Kaiser).
Thanks for pointing out the "Refresh All Tabs" option...I have to stupidly admit that I was not aware of it and I have been fixing the icons one at at a time....very boring...However, I have no solution to offer to the problem, other than to verify that it is a real one.
Hmm running fine on my kaiser with the hyperdragon roms...
Are you using the "close button" plugin? if so, did you enter tmail.exe and poutlook.exe as exceptions? don;t doing this could lead to problems
for the icons, I have the same problems too sometimes, did you install it on main memory? are the missing icons from programs installed on storagecard?
there is an option under today plugins->advanced, "refresh icons in today plug-in when storage card is inserted." try enabling that and see if it helps
Bartus
Hi guys!
Thanks for the responses! It's 'good' to know it's not just me having the SPB problem, although not good that it's happening at all!
I've installed it on Storage Card (as I have since my Wizard days). Using SKTools I've set the SDDeamon to startup 1st so was hoping that'd sort it... it didn't
I'm glad the refresh all tabs helped!
I've added those exceptions Bartus so I'll report back! I have the refresh icons when storage card inserted already which doesn't seem to work. It is the apps located on the storage card that don't load though so it has do be something to do with that.
Go back to 4.0.1 it doesn't have the problem.
Hi Sirooga
I'll give that a try, if I still have it on my HDD!
Cheers!
p.dixon0 said:
Hi Sirooga
I'll give that a try, if I still have it on my HDD!
Cheers!
Click to expand...
Click to collapse
did it work
Today Plugin Problems
I also use pocket plus on my Tilt, and it is apparently version 4.0.2 build 6227. What really annoys me is that the today plugin worked perfectly on wm 6.0, but after that &[email protected]#! 6.1 upgrade, it works fine for a few hours after I installed a lot of programs and soft resetted a bunch, until I backed up my phone. After using sprite Backup 5 ONCE, it deletes all my tabs and icons in the plugin and doesn't remember them no matter what I do. It still is checked in the today plugins menu, but it isn't there as there is nothing for it to show. SPB's got some serious work to do.
Dave
p.dixon0 said:
Hi guys!
Thanks for the responses! It's 'good' to know it's not just me having the SPB problem, although not good that it's happening at all!
I've installed it on Storage Card (as I have since my Wizard days). Using SKTools I've set the SDDeamon to startup 1st so was hoping that'd sort it... it didn't
I'm glad the refresh all tabs helped!
I've added those exceptions Bartus so I'll report back! I have the refresh icons when storage card inserted already which doesn't seem to work. It is the apps located on the storage card that don't load though so it has do be something to do with that.
Click to expand...
Click to collapse
Today plug-ins shoud be installed to Main Memory.
Spb 4.01 works far better than 4.02 IMO.
I have searched and searched, so far all that have the same issue as myself have not had an answer that works. I am bringing this to a new thread, in the hopes it will trigger some ideas on how to fix this.
I do know how to use the search system. I am usually a lurker, having the Diamond (NOT Pro) for a little over a week.
I have tried a number of different things to try to STOP the screen from waking up on a new text message. I have tried everything except the older version 3.2.. of the advanced config utility (I am reluctant to downgrade to older version as I have changed many things and have noticed that if you switch from one config utility from another will not work the same way, example is with TF3dconfig I removed the weather tab and forgot to reset all when I uninstalled it for the 3.3 version of advanced config. I try to re-activate the weather tab in 3.3 and it will not take-alas, another issue for another day). I have a Sprint version of the diamond. The DisableSMSWakeUpEvent does not work on my sprint diamond. It does not show up in the registry and when I create it, it still does nothing. This seems like such a silly thing to not have the option of adjusting in the oem configuration. The Pro has it, why not the non-pro version.
Many thanks for anyone that has a suggestion on how to get this screen to STAY OFF when a text comes in. Perhaps even a lock on incoming text that will be unlocked by the light sensor.
I have also discovered that TF3D does not like gsensor rotation. I wanted the text message to be landscape. Tried Gyrator 2, could not get it to reliably not rotate when a call is active. Tried changescreen, great easy to use, but TF3D overrides this. It works the first time or two, then the TF3D changes it to portrait. I did find that adding a rotate command to a registry entry (found in the forum) then assigned the 'green' phone button long hold to rotate. Works well and is easy as sometimes I do not want it to rotate.
Sorry for the run on, many thanks in advance for the help and insight.
Jeff
Sprint
Next? -->HTC Diamond Pro (I am not missing keyboard as much as I thought I would with TF3D)
HTC Diamond (WM6.1)
HTC Touch (WM6.1 ack! lasted a week)
HTC PPC6800 Mogul (WM6 upgraded WM6.1)
HTC PPC6700 (WM5)
Samsung I600 (WM 4?) (Flip phone)
Kyocera QCP-7035 (Palm) (Flip phone color)
Kyocera QCP-6035 (Palm) (Pseudo flip, greyscale)
A bump to see if anyone has a solution, many thanks for taking a look.
is it possible to make your phone vibrate on call connect while using the windows default keypad?
i know if i enable the diamond keypad it works.
and also the program "Vibrate On Connect" does not work with the Touch Pro.
I am told it cannot work without the diamond phonepad.
So i'm wondering if anyone can enable it through a .cab file on a non-htc customized 6.5 rom
Have You tried this?
Try Start>Settings>Personal Tab>Phone>Scroll all the way to the right until you see the Advanced tab>Remove the tick from "Vibrate device when connection is established">Click OK until you see your home screen.
TheDempster said:
Have You tried this?
Try Start>Settings>Personal Tab>Phone>Scroll all the way to the right until you see the Advanced tab>Remove the tick from "Vibrate device when connection is established">Click OK until you see your home screen.
Click to expand...
Click to collapse
That tab doesn't exist in WM6.5 with the default dialer.
The only way I know of is to use s2u2 and set it to answer calls and it has an option to vibrate on connect, but I honestly don't use it because I like the built-in lock app in 6.5.
GustavTheLion said:
is it possible to make your phone vibrate on call connect while using the windows default keypad?
i know if i enable the diamond keypad it works.
and also the program "Vibrate On Connect" does not work with the Touch Pro.
I am told it cannot work without the diamond phonepad.
So i'm wondering if anyone can enable it through a .cab file on a non-htc customized 6.5 rom
Click to expand...
Click to collapse
How do you switch between the Diamond dialer and the Windows default dialer? I can only see the Diamond dialer. If I knew how to switch I would look into it to help you.
AdamNimrod said:
How do you switch between the Diamond dialer and the Windows default dialer? I can only see the Diamond dialer. If I knew how to switch I would look into it to help you.
Click to expand...
Click to collapse
Da_G WM6.5 21198 Test 2 ROM has stock dialer. Only HTC based app i've noticed so far is for the camera. You could flash this and check out the fresh new non-htc goodness..
neight said:
Da_G WM6.5 21198 Test 2 ROM has stock dialer. Only HTC based app i've noticed so far is for the camera. You could flash this and check out the fresh new non-htc goodness..
Click to expand...
Click to collapse
Uh, thats that ROM Im already an using.
that option is there because i used Da_G's kitchen and installed the htc dialer because i thought i would like it, however the 6.5 dialer i like better so i used advanced config to switch back.
and yes i like the 6.5 lock much better as well so s2u2 is not an option.
also i downloaded some kind of green button app or something called vibrate which automatically starts when i boot up however never installed, just ran as a .exe and it does what i want- almost- it vibe's on connect however it is a little late and the vibration is too much and not subtle like the htc diamon dialpad one- if anyone can get the vibrate on connect feature from the diamond dialer it would be apprieciated- also how can i stop this new vibrate.exe from running?
Try this and hope you got the fix.
HKLM\Software\HTC\PHONE\PhoneExtendSetting
"ConnectingVibration" set value to 1 to Enable
0 to Disable in Decimal
beastfellow said:
Try this and hope you got the fix.
HKLM\Software\HTC\PHONE\PhoneExtendSetting
"ConnectingVibration" set value to 1 to Enable
0 to Disable in Decimal
Click to expand...
Click to collapse
the value is 1
and not Vibrate after connect
thank you
didnt notice the word "htc" in that registry key? thats for the diamond dialer. does it not work if you install htc dialer and disable it (switch back to standard wm dialer) using something like diamond tweak? or does the tab with the vibrate option disappear with it?
The Jack of Clubs said:
didnt notice the word "htc" in that registry key? thats for the diamond dialer. does it not work if you install htc dialer and disable it (switch back to standard wm dialer) using something like diamond tweak? or does the tab with the vibrate option disappear with it?
Click to expand...
Click to collapse
To return to WM dialer
HKLM\Security\Phone\Skin
set (Enabled) to 0
soft reset
I used Advanced Config v3.3 to revert to the WM 6.5 dialer (which I actually like a lot more than I thought I would), but I also lost the vibrate functionality, which I really enjoy, since where I work my signal fluctuates a lot, and even though I'll show good service on Sprint, it often won't connect, and I'll just hold it in my hand, or put it down on the table and wait for it to actually go to "connected" when I hear/feel the vibrate.
When I go into the Phone options Advanced tab I still have the option to "Vibrate on Connect", but it doesn't work, either checked, or unchecked.
Anyone able to get their phone to vibrate on connect using the WM6.5 dialer?
This isn't a dealbreaker for me, or anything, as I prefer the speedier WM dialer over the delayed HTC dialer (especially when the unit is locked), but it would be nice to get it back.
Vibration on connect
vibration on connect and Slide unlock bugs existent in all cooked ROMs in this forum. I trial all ROMs and found it. If you know the resolves please post it here. thanks
i have the same problem and i would like to know how to fix it ..
thanks all
-Did you try using "Pocket Shield"?, i use it with Da_G 6.5 rom too.
-It's a locking program with amazing options to lock/unlock your device (with light, stylus, slide, gestures)
-AND has the option to vibrate when call connected and is as subtle as de touch pro/diamond dialer. Just a short vibration after the call is engaged.
-Works great for me...
-IT IS NOT FREEWARE though... googleeeeeeee
The solution
Dear my friends ,
here is the solution.
A little CAB for you ;D
Greez,
kvNN_
hi,
have problems for install this cab...
have a error and don't possible install... any idea ?
I have a HTC Diamond and WM 6.5 ROM.