Anyone heard if this is possible?
Hmmm...I'm interested in that too!
I saw a repack of the requisite files floating around elsewhere - I might give installing it a shot and see what happens.
Worst case is it hard resets my device or shoots freaking laserbeams across the house, hitting my brother's girlfriend, which at the moment I would consider a useful feature...
culd some one post a picture of it running on treo 750 ?
what means touchflo? .. give me link or explanation.. thx
vasek said:
what means touchflo? .. give me link or explanation.. thx
Click to expand...
Click to collapse
check out the HTC Touch
I think with the touchflo interface, the 750v would be near perfect!
That being the case, gimme it please
Simmiter....if you get hold of it and make it work...can you post a few pics and give a comment on your expedition?
Cheers
motorwayne
justin_stuckey said:
Anyone heard if this is possible?
Click to expand...
Click to collapse
I went ahead and install the 5 tab htc today plugin and played around with it. Their seems to be a stability problem as the treo now would randomly reboot itself. I tried installing it after a hard reset and it seems okay but started rebooting again after installing my apps. got rid of it for now... hehe
just installed the 6 tab htc home no trouble so far awaiting the probs though
hey guys i heard that the 3 tab works with our 750...i heard it somewhere in the touch threads...btw id we install it, with a simple uninstall and a soft reset, will it get everything back to normal??? or a hard reset is what we have to do to get it normal again...btw where are you guys d/l'ing the touchflo for the 750 from???links please...
hey I have actually installed it on my Treo its loads with no probs. However there are a couple of conflicts like not being able to access the dial pad or call log via the call button. I have even experienced this error while clicking on call log or dial pad. After a little research I found it to be a conflict between the htc home and palm software. Simply clinkin on the left hand corner to initiate the x button pop up I can then click on both the call log as well as the dial pad with out a problem. As for the touch flo cube it does not fit the entire screen, I assume this to be just be the treos 240x240 screen. I also noticed the cube to be slow in it's revolving. If we can get past the conflicts and adapt the program to the treo's screen its possible we might even get it to run as smooth as it does on the artemis. I am shocked at the few interested in advancing such a feature on the treo. I am sure once the cooked roms start to surface we can truly unlock the power of the device.
which touchflo program did you load and where did you get it?
Issues...
Another issue with the Touch Flo Home on the Treo 750, is that the green and red button don't work correctly anymore...
Normally, when you press the red button, the device go to sleep mode, that don't work anymore...
When you press the green button, you don't have the menu with the last call...
That's very annoying for my part...
So I uninstall the Touch Flo Home. Try with the Kaiser's Version and have the same issue...
Touchflo on the Treo 750
Does anyone know how to contact PDAViet? He would be our best option. He may be kind enough to make a rom for the 750 ?? Holding my breath ...
TouchFLO and HTCHome are two very different things.
zeek112 said:
TouchFLO and HTCHome are two very different things.
Click to expand...
Click to collapse
Can someone send me the File for both TouchFLO or HTCHome? Thanks.
I'd like the link to the CABs of the Touchflo and/or HTC Home that anyone has working on the 750.
Thanks in advance.
[email protected] said:
Another issue with the Touch Flo Home on the Treo 750, is that the green and red button don't work correctly anymore...
Normally, when you press the red button, the device go to sleep mode, that don't work anymore...
When you press the green button, you don't have the menu with the last call...
That's very annoying for my part...
So I uninstall the Touch Flo Home. Try with the Kaiser's Version and have the same issue...
Click to expand...
Click to collapse
I installed the 6 Button Kaiser HTC home plugin on my Treo 750 and have no problems with it @ all. As for the green and the Red buttons, all u have to do is add the "Dial Lookup" to the Today screen and the green and red buttons will work perfectly.
HTC Home and TouchFlo are 2 totally different things. HTC Home is the Today Screen plug-in, TouchFlo is the 3D cube, finger scrolling etc which was 1st introduced in the HTC Touch phone.
trjons said:
I'd like the link to the CABs of the Touchflo and/or HTC Home that anyone has working on the 750.
Thanks in advance.
Click to expand...
Click to collapse
HTC Home
http://forum.xda-developers.com/showthread.php?t=327646&highlight=6+tab+htc+home
HTC TouchFlo is not as easy as just a cab to install. TouchFlo needs to update files on the device that can't be changed will the OS is running, n that's why TouchFlo has to be cooked in the ROM
Ok....
With Dial Lookup checked, the red and green buttons work! Thanks for that.
The problem now is that there is wasted screen real estate below the Kaiser plugin for the network carrier logo.
Hidelogo causes resets so don't bother.
and if you try to type contacts by name they go off the bottom of the screen. is there a way to use the screen better?
Related
Is it possible to have touch-flo working on our wm6 himalaya
the other devices apart from touch
dont seem to be able to get it working as it does on touch
so i would not count on it
but few components of touch flo seems work.
I think at first we need fix gprs trouble.
yeah but from what i understand they need to use some hardware button to activate some of the flo
which the touch people dont
what i'm intresting in is if wm6 will give better bluetooth a2dp for himalaya
doubt it though :S
sorry for offtop
wm6 give at least Bluetooth PAN over MS drivers.
Rudegar said:
what i'm intresting in is if wm6 will give better bluetooth a2dp for himalaya
Click to expand...
Click to collapse
Works flawlessly with 400 MHz.
Much better than WM 5.0 on my StarTrec headphone.
Sascha
would the touchflo on blue angel would work on himalaya?
Where can one download touchflo??
I want to try it out!
Im looking for this file: Touch Flo (Alpha).zip
Will it work on HIma??
Thanks guys!!!!
recall a link here
http://forum.xda-developers.com/showthread.php?t=326523&page=6
Touch Flo Alpha - not working on Hima
I must hard reset.
divocak said:
Touch Flo Alpha - not working on Hima
I must hard reset.
Click to expand...
Click to collapse
Yes i also confirm this. It isnt working.. my device is now freezed on boot screen.. hard resetting it...
from what i've picked up in forums for trinity and hermes then
the touch flo require a special screen dll
all devices have that dll but the touchs is different
and they all seem spc to the device so one cant just move the dll from touch to another device
well that is to say one cant move the dll from touch to another device yet!
When you search Youtube for Touchflo, you get a whole bunch of clips from all kinds of HTC devices running Touchflo quite well. Some do use buttons (who cares?) with touch screen finger touch mode, others seem not to touch any hardware buttons at all. In all cases they're able to access anything on screen without ever grabbing a stylus.
Although I've not yet been able to taste this kinda success on my Hima, it gives me good hope that soon enough it'll be available to us as well.
In HELMI_C addon2 is touchflo version which i can install (and mustn´t hard resert). But i can´t run it - some problem with certificate.
divocak said:
In HELMI_C addon2 is touchflo version which i can install (and mustn´t hard resert). But i can´t run it - some problem with certificate.
Click to expand...
Click to collapse
I hope u don't mind, I will post this in the main thread for the Tofclock ROM here.
http://forum.xda-developers.com/showthread.php?p=1499747&posted=1#post1499747
We might have a solution.
tofclock wm6 rom all installed ok....(with tochtest.cab app from addon2)
touchflo opens in bits... (goto programs then touchflo) theres separate apps for each screen...makes sense..
what dosnt work at all is the task bar button at the bottom,... comes up with "cannot be opened. either it is not a trusted certificate, or one of its components cannot be found....try reinsalling ect..."
in the top left of the error window it has ' " ' ..what is it trying to open???
ive trailed through all the settings but theres nothing to configure for this,,, id would be amazing to get this working like the 'touch' phone...
anyone any ideas????
neoknowles said:
tofclock wm6 rom all installed ok....(with tochtest.cab app from addon2)
touchflo opens in bits... (goto programs then touchflo) theres separate apps for each screen...makes sense..
what dosnt work at all is the task bar button at the bottom,... comes up with "cannot be opened. either it is not a trusted certificate, or one of its components cannot be found....try reinsalling ect..."
in the top left of the error window it has ' " ' ..what is it trying to open???
ive trailed through all the settings but theres nothing to configure for this,,, id would be amazing to get this working like the 'touch' phone...
anyone any ideas????
Click to expand...
Click to collapse
Got the same problem.
Got the same message today from another taskbar button. I downloaded the test version of Pocket Hack Master today. I uninstalled it also for several other issues a.o. that it wants to constantly run at the highest turbo speed, telling me that CPU load is 100%, while I want to underclock to expand battery life.
But the same message from unrelated taskbar buttons sounds like we found another bug in the ROM. HTC and Anton Topov both spread their software with trusted certificates I assume. And I checked, there was nothing wrong with the startup shortcut of PHM as you probably checked for Touchflo.
I cant find a rom that has a touch flow cube. I want the black diamond rom for my wizard to work with herald. I love that rom!!
There are many ROMs here. Usually the ones that aren't labeled "lite" "slim" or "clean" have the cube but the cube has to enabled.
cube
ive tried several roms and I got one that lete enable the cube, but I dont know how to invoke it. On my wizard i invoked it by setting it to a button. Im lost.
The WM6.1 ROM's don't have it.... :-/
well i don't know, i do kinda use it a llllot with the WM6 ROM's...
You have to set it up. You can set it to use a button or a gesture. I find it utterly useless, so I'm not the expert on it.
I didn't flash one yet... I was just assuming since the 3 here all said Touch Flo No Cube...hmm...maybe I won't miss the cube after all!!
I mostly use it for the photo dialer.. haha... i have like 18 "faves" now
Oh...ttran released Open Touch v3.0 Biggy has a cube..i think..
how interesting..........
Touch-It 4.41, which is better, has a Cube.
Worked for me and most everyone else whose tried it. Apparently the problem is his and not the software's.
aad4321 said:
thats strange, for my wing, when i go into the settings, it just has a half a box, and i cant click it.... i think it may have to do with that x button cab i had to install.
Click to expand...
Click to collapse
If you installed that X Button FIX then yeah it creates a useless Icon in the programs called TF Settings.
That IS THE SOLUTION! IF YOU DONT LIKE IT GET THE HELL RID OF IT!
This has been said several time now in the forums!
mv3 said:
The WM6.1 ROM's don't have it.... :-/
well i don't know, i do kinda use it a llllot with the WM6 ROM's...
Click to expand...
Click to collapse
Well you know the cube makes your Device SOOOOOO Sloww!!
And you allready have a applaucher in the HTC Home Plug so why cube ?
well... it doesnt seem to slow down my phone.. i also have the sprint home plug-in. i like having the 2nd app launcher and photodialer.. and sometimes way more faster than going back to the today screen and having to focus on which tab, then which shortcut to push. with the cube..i could be using whatever program i'm on..then with only 1 or 2 finger gestures, i'd be at the dialer or app launcher.windows mobile apps are known to run differently on same model phone and everybody has different tastes.. just cause i liked it doesnt mean you have to also.. and really, it didn't slow down performance for me... but activesync startig up in the background, hat slows mine down!
On my brother's Touch Pro and on several WM 6.1 ROMs for my Wizard, there's an HTC program. When you click on any of the icons in the top right corner (Connectivity, Phone, Volume, Battery, etc) it would pop up a full screen menu, making it easy to choose which one without a stylus.
Does anyone know what it's called and if I can get it on my TyTN II with a cab?
feanor512 said:
On my brother's Touch Pro and on several WM 6.1 ROMs for my Wizard, there's an HTC program. When you click on any of the icons in the top right corner (Connectivity, Phone, Volume, Battery, etc) it would pop up a full screen menu, making it easy to choose which one without a stylus.
Does anyone know what it's called and if I can get it on my TyTN II with a cab?
Click to expand...
Click to collapse
Actually I do :
You can find it here
After I installed these programs the option you discribed appeared! I believe it's the opal and random access!
GL !
Dreetje said:
Actually I do :
You can find it here
After I installed these programs the option you discribed appeared! I believe it's the opal and random access!
GL !
Click to expand...
Click to collapse
It was Opal Title Bar. Thanks!
Hey guys,
I just did like 5 different google searches through the site and I cant find the HTC Black Dialer/Phone Canvas cab.
Does anyone happen to have one?
Thanks a bunch!
Daniel
You didn't look hard enough I tell you
right on!!!
Honestly I did, the closet thing I found where the black IMG files from LantisOS ROM, but that didnt include the phone as well.
Thank you for the cab!
EDIT: Im trying to install this on top of Da_G's latest 6.5 ROM, and I am still getting the default Windows Dialer...do you know what I can do to make this work?
Yes, sometimes it's hard to find certain things. I simply wanted to find the black manila start panel skin for my TP and it took me hours but I finally found it.
Is there a version without the slide to answer?
I installed this cab and love the look but have been experiencing a glitch; the on-screen buttons get blurryed and are not responsive once a call is dailed and I press send. I cannot access the speakerphone/note/end call etc that are displayed in a blurred fashion...anyone else getting this?
D3TH METAL said:
Is there a version without the slide to answer?
Click to expand...
Click to collapse
I am not sure whether this is what you are looking for, but it really looks cool
http://forum.xda-developers.com/showthread.php?t=438412
bugsy714 said:
I installed this cab and love the look but have been experiencing a glitch; the on-screen buttons get blurryed and are not responsive once a call is dailed and I press send. I cannot access the speakerphone/note/end call etc that are displayed in a blurred fashion...anyone else getting this?
Click to expand...
Click to collapse
I think it might be possible that it is the in call curtain you see. Have to slide it down to access buttons behind it.
jmckeejr said:
I think it might be possible that it is the in call curtain you see. Have to slide it down to access buttons behind it.
Click to expand...
Click to collapse
I think you are right, thanks for the info!
Well this one was the charm for my Sprint TP. Works Great, and did not foul anything up
to whoever said they tried the s2a on wm6.5 with no luck.. I believe that the dialer is still an issue with wm6.5 that has yet to be fixed..compatability issues between htc and m$ i think..I also tried installing s2a and when i would receive a call the screen would glitch and switch between the traditional 6.5 slide to answer, the older 6.1 style answer screen, and the s2a screen lol very glitchy...
hi there...
some weeks ago, i had the touch hd (Blackstone) and there was the touchflow GUI installed but i was still able to get behind it and use the phone the normal winows mobile way...
how can i get this on this device?
Eh... disable touchflo perhaps?
i want both! at the same time... the behavior is more restricted on this phone now...
thought that was noticeable in my question
If you would like to use TouchFLO and the Windows Today screen, you should use TouchFLO Detacher.
I guess this is what you have seen on the blackstone (it is not standard).
ok, i will follow your link...
i mean (things that i found first) that when i hit the windows logo (or button) now there is only touch flow grafic menu stuff...
no old windows start menu any more...
no old windows setting, programms etc, menu behaviour...
thanx! anyway ;-)
i checked the vid, and it might work for me, i will test on my device later....
but, its not completely the way i t was on th blackstone...
on diamond2 the windows start menu is comlpetely taken over by touch flow, taken away, hidden... swapped with the big icons to start from...
the old tart menu was still there at the blackstoe (touch hd device)
yes there is, just go to the settings tap and press anvanced :-D then the windows menu appears
Ah.. Now I get what your problem is..
Please have a look in this thread.
I guess this is what you are searching for. Let me know if it is.
thanx, i think it is exactly my prob...
bloody hell, didnt find that before...
will try and follow there, also someone talks about wm6.5...
in the wiki here, for diamond2 is nealry nothing that links to tweaks or stuff, at the touch hd wiki entry there is so much to follow ;-) lets see what the future brings to my phone...
With all the Topaz based Roms, many Tweaks of Touch HD are also possible on Topaz. So don't be shy to visit the Touch HD section of the board ;-)
greets