Related
Anyone heard if this is possible?
Hmmm...I'm interested in that too!
I saw a repack of the requisite files floating around elsewhere - I might give installing it a shot and see what happens.
Worst case is it hard resets my device or shoots freaking laserbeams across the house, hitting my brother's girlfriend, which at the moment I would consider a useful feature...
culd some one post a picture of it running on treo 750 ?
what means touchflo? .. give me link or explanation.. thx
vasek said:
what means touchflo? .. give me link or explanation.. thx
Click to expand...
Click to collapse
check out the HTC Touch
I think with the touchflo interface, the 750v would be near perfect!
That being the case, gimme it please
Simmiter....if you get hold of it and make it work...can you post a few pics and give a comment on your expedition?
Cheers
motorwayne
justin_stuckey said:
Anyone heard if this is possible?
Click to expand...
Click to collapse
I went ahead and install the 5 tab htc today plugin and played around with it. Their seems to be a stability problem as the treo now would randomly reboot itself. I tried installing it after a hard reset and it seems okay but started rebooting again after installing my apps. got rid of it for now... hehe
just installed the 6 tab htc home no trouble so far awaiting the probs though
hey guys i heard that the 3 tab works with our 750...i heard it somewhere in the touch threads...btw id we install it, with a simple uninstall and a soft reset, will it get everything back to normal??? or a hard reset is what we have to do to get it normal again...btw where are you guys d/l'ing the touchflo for the 750 from???links please...
hey I have actually installed it on my Treo its loads with no probs. However there are a couple of conflicts like not being able to access the dial pad or call log via the call button. I have even experienced this error while clicking on call log or dial pad. After a little research I found it to be a conflict between the htc home and palm software. Simply clinkin on the left hand corner to initiate the x button pop up I can then click on both the call log as well as the dial pad with out a problem. As for the touch flo cube it does not fit the entire screen, I assume this to be just be the treos 240x240 screen. I also noticed the cube to be slow in it's revolving. If we can get past the conflicts and adapt the program to the treo's screen its possible we might even get it to run as smooth as it does on the artemis. I am shocked at the few interested in advancing such a feature on the treo. I am sure once the cooked roms start to surface we can truly unlock the power of the device.
which touchflo program did you load and where did you get it?
Issues...
Another issue with the Touch Flo Home on the Treo 750, is that the green and red button don't work correctly anymore...
Normally, when you press the red button, the device go to sleep mode, that don't work anymore...
When you press the green button, you don't have the menu with the last call...
That's very annoying for my part...
So I uninstall the Touch Flo Home. Try with the Kaiser's Version and have the same issue...
Touchflo on the Treo 750
Does anyone know how to contact PDAViet? He would be our best option. He may be kind enough to make a rom for the 750 ?? Holding my breath ...
TouchFLO and HTCHome are two very different things.
zeek112 said:
TouchFLO and HTCHome are two very different things.
Click to expand...
Click to collapse
Can someone send me the File for both TouchFLO or HTCHome? Thanks.
I'd like the link to the CABs of the Touchflo and/or HTC Home that anyone has working on the 750.
Thanks in advance.
[email protected] said:
Another issue with the Touch Flo Home on the Treo 750, is that the green and red button don't work correctly anymore...
Normally, when you press the red button, the device go to sleep mode, that don't work anymore...
When you press the green button, you don't have the menu with the last call...
That's very annoying for my part...
So I uninstall the Touch Flo Home. Try with the Kaiser's Version and have the same issue...
Click to expand...
Click to collapse
I installed the 6 Button Kaiser HTC home plugin on my Treo 750 and have no problems with it @ all. As for the green and the Red buttons, all u have to do is add the "Dial Lookup" to the Today screen and the green and red buttons will work perfectly.
HTC Home and TouchFlo are 2 totally different things. HTC Home is the Today Screen plug-in, TouchFlo is the 3D cube, finger scrolling etc which was 1st introduced in the HTC Touch phone.
trjons said:
I'd like the link to the CABs of the Touchflo and/or HTC Home that anyone has working on the 750.
Thanks in advance.
Click to expand...
Click to collapse
HTC Home
http://forum.xda-developers.com/showthread.php?t=327646&highlight=6+tab+htc+home
HTC TouchFlo is not as easy as just a cab to install. TouchFlo needs to update files on the device that can't be changed will the OS is running, n that's why TouchFlo has to be cooked in the ROM
Ok....
With Dial Lookup checked, the red and green buttons work! Thanks for that.
The problem now is that there is wasted screen real estate below the Kaiser plugin for the network carrier logo.
Hidelogo causes resets so don't bother.
and if you try to type contacts by name they go off the bottom of the screen. is there a way to use the screen better?
Is it possible to have touch-flo working on our wm6 himalaya
the other devices apart from touch
dont seem to be able to get it working as it does on touch
so i would not count on it
but few components of touch flo seems work.
I think at first we need fix gprs trouble.
yeah but from what i understand they need to use some hardware button to activate some of the flo
which the touch people dont
what i'm intresting in is if wm6 will give better bluetooth a2dp for himalaya
doubt it though :S
sorry for offtop
wm6 give at least Bluetooth PAN over MS drivers.
Rudegar said:
what i'm intresting in is if wm6 will give better bluetooth a2dp for himalaya
Click to expand...
Click to collapse
Works flawlessly with 400 MHz.
Much better than WM 5.0 on my StarTrec headphone.
Sascha
would the touchflo on blue angel would work on himalaya?
Where can one download touchflo??
I want to try it out!
Im looking for this file: Touch Flo (Alpha).zip
Will it work on HIma??
Thanks guys!!!!
recall a link here
http://forum.xda-developers.com/showthread.php?t=326523&page=6
Touch Flo Alpha - not working on Hima
I must hard reset.
divocak said:
Touch Flo Alpha - not working on Hima
I must hard reset.
Click to expand...
Click to collapse
Yes i also confirm this. It isnt working.. my device is now freezed on boot screen.. hard resetting it...
from what i've picked up in forums for trinity and hermes then
the touch flo require a special screen dll
all devices have that dll but the touchs is different
and they all seem spc to the device so one cant just move the dll from touch to another device
well that is to say one cant move the dll from touch to another device yet!
When you search Youtube for Touchflo, you get a whole bunch of clips from all kinds of HTC devices running Touchflo quite well. Some do use buttons (who cares?) with touch screen finger touch mode, others seem not to touch any hardware buttons at all. In all cases they're able to access anything on screen without ever grabbing a stylus.
Although I've not yet been able to taste this kinda success on my Hima, it gives me good hope that soon enough it'll be available to us as well.
In HELMI_C addon2 is touchflo version which i can install (and mustn´t hard resert). But i can´t run it - some problem with certificate.
divocak said:
In HELMI_C addon2 is touchflo version which i can install (and mustn´t hard resert). But i can´t run it - some problem with certificate.
Click to expand...
Click to collapse
I hope u don't mind, I will post this in the main thread for the Tofclock ROM here.
http://forum.xda-developers.com/showthread.php?p=1499747&posted=1#post1499747
We might have a solution.
tofclock wm6 rom all installed ok....(with tochtest.cab app from addon2)
touchflo opens in bits... (goto programs then touchflo) theres separate apps for each screen...makes sense..
what dosnt work at all is the task bar button at the bottom,... comes up with "cannot be opened. either it is not a trusted certificate, or one of its components cannot be found....try reinsalling ect..."
in the top left of the error window it has ' " ' ..what is it trying to open???
ive trailed through all the settings but theres nothing to configure for this,,, id would be amazing to get this working like the 'touch' phone...
anyone any ideas????
neoknowles said:
tofclock wm6 rom all installed ok....(with tochtest.cab app from addon2)
touchflo opens in bits... (goto programs then touchflo) theres separate apps for each screen...makes sense..
what dosnt work at all is the task bar button at the bottom,... comes up with "cannot be opened. either it is not a trusted certificate, or one of its components cannot be found....try reinsalling ect..."
in the top left of the error window it has ' " ' ..what is it trying to open???
ive trailed through all the settings but theres nothing to configure for this,,, id would be amazing to get this working like the 'touch' phone...
anyone any ideas????
Click to expand...
Click to collapse
Got the same problem.
Got the same message today from another taskbar button. I downloaded the test version of Pocket Hack Master today. I uninstalled it also for several other issues a.o. that it wants to constantly run at the highest turbo speed, telling me that CPU load is 100%, while I want to underclock to expand battery life.
But the same message from unrelated taskbar buttons sounds like we found another bug in the ROM. HTC and Anton Topov both spread their software with trusted certificates I assume. And I checked, there was nothing wrong with the startup shortcut of PHM as you probably checked for Touchflo.
I cant find a rom that has a touch flow cube. I want the black diamond rom for my wizard to work with herald. I love that rom!!
There are many ROMs here. Usually the ones that aren't labeled "lite" "slim" or "clean" have the cube but the cube has to enabled.
cube
ive tried several roms and I got one that lete enable the cube, but I dont know how to invoke it. On my wizard i invoked it by setting it to a button. Im lost.
The WM6.1 ROM's don't have it.... :-/
well i don't know, i do kinda use it a llllot with the WM6 ROM's...
You have to set it up. You can set it to use a button or a gesture. I find it utterly useless, so I'm not the expert on it.
I didn't flash one yet... I was just assuming since the 3 here all said Touch Flo No Cube...hmm...maybe I won't miss the cube after all!!
I mostly use it for the photo dialer.. haha... i have like 18 "faves" now
Oh...ttran released Open Touch v3.0 Biggy has a cube..i think..
how interesting..........
Touch-It 4.41, which is better, has a Cube.
Worked for me and most everyone else whose tried it. Apparently the problem is his and not the software's.
aad4321 said:
thats strange, for my wing, when i go into the settings, it just has a half a box, and i cant click it.... i think it may have to do with that x button cab i had to install.
Click to expand...
Click to collapse
If you installed that X Button FIX then yeah it creates a useless Icon in the programs called TF Settings.
That IS THE SOLUTION! IF YOU DONT LIKE IT GET THE HELL RID OF IT!
This has been said several time now in the forums!
mv3 said:
The WM6.1 ROM's don't have it.... :-/
well i don't know, i do kinda use it a llllot with the WM6 ROM's...
Click to expand...
Click to collapse
Well you know the cube makes your Device SOOOOOO Sloww!!
And you allready have a applaucher in the HTC Home Plug so why cube ?
well... it doesnt seem to slow down my phone.. i also have the sprint home plug-in. i like having the 2nd app launcher and photodialer.. and sometimes way more faster than going back to the today screen and having to focus on which tab, then which shortcut to push. with the cube..i could be using whatever program i'm on..then with only 1 or 2 finger gestures, i'd be at the dialer or app launcher.windows mobile apps are known to run differently on same model phone and everybody has different tastes.. just cause i liked it doesnt mean you have to also.. and really, it didn't slow down performance for me... but activesync startig up in the background, hat slows mine down!
The touch 3D works great for me, BUT it removes all my other today plugins, which I most definitely need.
Is there any way to combine the touch 3D, and still having access to the std today plugins?
Amir.
I have the same question- does anyone have any answers to this ? For example , I want to have the RSS feeds in my home screen along with TFLO3D ? is it possible?
use ultimate launch to place touchflo3d on first page and the other plugins on the next page. you can size one page to fit the whole screen so that you can switch between whole pages with your thumb or with a click, like you want
greets, pucki
ps: if you prefer freeware you can use battery status, it can include today plugins as well but you have to create a personal theme on a xml-base. i made it for nike and elf, it should work on diamond also. i'm going to use batterystatus too on the diamond, but we germans has to wait until t-mobile sells the device on july 14th. if you can wait so long i will give you my theme
Can't get ultimate launch to work. When I activate the first screen, my todayscreen stays blanc.
The Ultimate launch is than removed from the todayscreen.
Can you explain what I have to do to make my own xml file fot batterystatus?
Thanx
look here http://www.chi-tai.info/cs_batterystatus_xda_neo_wm5_ext_cust_im_cs.htm
Puckmeister said:
use ultimate launch to place touchflo3d on first page and the other plugins on the next page. you can size one page to fit the whole screen so that you can switch between whole pages with your thumb or with a click, like you want
greets, pucki
ps: if you prefer freeware you can use battery status, it can include today plugins as well but you have to create a personal theme on a xml-base. i made it for nike and elf, it should work on diamond also. i'm going to use batterystatus too on the diamond, but we germans has to wait until t-mobile sells the device on july 14th. if you can wait so long i will give you my theme
Click to expand...
Click to collapse
offtopic ...
you don't have to wait if you are o2 customer
johnkorver said:
Can't get ultimate launch to work. When I activate the first screen, my todayscreen stays blanc.
The Ultimate launch is than removed from the todayscreen.
Can you explain what I have to do to make my own xml file fot batterystatus?
Thanx
Click to expand...
Click to collapse
just had the same idea, ul didn't work at all
hopefully there will be a new ul version with diamond support
tf3d is so nice, i wish i could remove the internet tab and replace it with batterystatus instead!
Guys try this program http://www.chi-tai.info/download/SecondToday.zip and do this:
Copy SecondToday.exe to your desired location, e.g. \Program Files\SecondTody\SecondToday.exe and start the application
and then just copy the program again to windows start menu, and then add it to program list in the htc touch flo. then when ever you want it just click it.
Until now this is the best way to fix it
I went to their site I didn't understand anything. What does SecondToday do? I can get something from its name, but how does it actually work?
Direct download is impossible: go here: http://www.chi-tai.info/cs_wm_tools_im_cs.htm
basically what it does is that it is a program that opens the today screen without touch flo
fataldeath44 said:
basically what it does is that it is a program that opens the today screen without touch flo
Click to expand...
Click to collapse
Thank you for making that clear. Can you return to TouchFlo afterwards?
is it possible to run this second today - thing in autostart without interfering with touch3d?sometimes it does not open when i execute it...
i need to keep an eye on my calltimes and umts-data because both is limited due my contract and the only tool that handles both is (as far as i know) battery status...correct me if i'm wrong. gprs counter is bundled with my diamond but it isn't able to count call times...
edit: just tested it and second today always gets closed (or crashes) when touchflo3d is enabled...i can add plugins to 2nd today but when i switch back to touchflo3d second today not listed in taskmanager anymore after a couple of seconds.
Hi,
did anyone find a solution to make BatteryStatus run in Background in combination with TF3D or TF2D??
I also need that app but just for the dynamically OC-Freature....
Regards
touch-it said:
Hi,
did anyone find a solution to make BatteryStatus run in Background in combination with TF3D or TF2D??
I also need that app but just for the dynamically OC-Freature....
Regards
Click to expand...
Click to collapse
I use a program called Ariel Battery and disabled the default battery icon. Put Ariel Battery in your startup folder, you can modify color schemes, it's small and even shows you the %.
amir77a said:
The touch 3D works great for me, BUT it removes all my other today plugins, which I most definitely need.
Is there any way to combine the touch 3D, and still having access to the std today plugins?
Amir.
Click to expand...
Click to collapse
You will find the answer in that thread: http://forum.xda-developers.com/showthread.php?t=401907
hi there...
some weeks ago, i had the touch hd (Blackstone) and there was the touchflow GUI installed but i was still able to get behind it and use the phone the normal winows mobile way...
how can i get this on this device?
Eh... disable touchflo perhaps?
i want both! at the same time... the behavior is more restricted on this phone now...
thought that was noticeable in my question
If you would like to use TouchFLO and the Windows Today screen, you should use TouchFLO Detacher.
I guess this is what you have seen on the blackstone (it is not standard).
ok, i will follow your link...
i mean (things that i found first) that when i hit the windows logo (or button) now there is only touch flow grafic menu stuff...
no old windows start menu any more...
no old windows setting, programms etc, menu behaviour...
thanx! anyway ;-)
i checked the vid, and it might work for me, i will test on my device later....
but, its not completely the way i t was on th blackstone...
on diamond2 the windows start menu is comlpetely taken over by touch flow, taken away, hidden... swapped with the big icons to start from...
the old tart menu was still there at the blackstoe (touch hd device)
yes there is, just go to the settings tap and press anvanced :-D then the windows menu appears
Ah.. Now I get what your problem is..
Please have a look in this thread.
I guess this is what you are searching for. Let me know if it is.
thanx, i think it is exactly my prob...
bloody hell, didnt find that before...
will try and follow there, also someone talks about wm6.5...
in the wiki here, for diamond2 is nealry nothing that links to tweaks or stuff, at the touch hd wiki entry there is so much to follow ;-) lets see what the future brings to my phone...
With all the Topaz based Roms, many Tweaks of Touch HD are also possible on Topaz. So don't be shy to visit the Touch HD section of the board ;-)
greets