Related
laptop no longer recognizes tilt or tytn; changed usb cables; rebooted both devices and laptop; no go..
mssg I get is "one of the usb devices attached to this computer has malfunctioned. and windows does not recognize it"; any suggestions; cannot sunc nor tether via ISharing.
tia
a in yul said:
laptop no longer recognizes tilt or tytn; changed usb cables; rebooted both devices and laptop; no go..
mssg I get is "one of the usb devices attached to this computer has malfunctioned. and windows does not recognize it"; any suggestions; cannot sunc nor tether via ISharing.
tia
Click to expand...
Click to collapse
Hi
First of all try to reinstall Microsoft ActiveSync, than in the ActiveSync options, in your device, be sure that in "Connections..." setting "Synchronize all PC by this connection" is checked and below "USB" showed!
Otherwise, if your device, when connected to the PC, also doesn't charge (if you have this option enebled on your PDA!) there is some problem on your PC settings concerning the USB! Try to connect to someother PC to test it!
Ciao
thx...
@[email protected] said:
Hi
First of all try to reinstall Microsoft ActiveSync, than in the ActiveSync options, in your device, be sure that in "Connections..." setting "Synchronize all PC by this connection" is checked and below "USB" showed!
Otherwise, if your device, when connected to the PC, also doesn't charge (if you have this option enebled on your PDA!) there is some problem on your PC settings concerning the USB! Try to connect to someother PC to test it!
Ciao
Click to expand...
Click to collapse
hello there, first n foremost thanks for your input!
Before trying out your possible solution i tried to connect and for some reason i was able to connect via the device today...??!!
i really dont know why, but will try your soln if this situation reocurrs.
NB: this happenned to me twice in the last 3-4 months, n i never figured out the cause ??
any other advice or ideas gratefully accepted.;
its probably the same as me and loads of other people - the pins have bent on your usb connector - probably caused by using non standard chargers and usb leads. Its been widely reported. The non-standard leads have too much space around them when plugged in and wiggle causing the connector on the tytn II to bend. Try using the lead which came in the box and see if it helps. and try using the charger that came with it too.
Can bent pins be fixed?
Hello -- I'm one of those people with a non-recognition problem. Is it possible to fix the bent pins? My problem seems to have begun around the time I lost my original USB cable. Now, all the cables I have -- ones that have been specifically sold to work with my HTC Tilt -- have the symmetrical, sort-of-trapezoidal mini-usb connection, rather than the rectangle-with-one-corner-cut-off shape of the original cable. I should say these cables do charge my device, but none of my computers recognizes it as a USB device.
Help?
Thank you,
J. Georgia
bent pins continued
I should add that the charging cable that originally came with my phone has the same connector shape, so I'm not sure what's going on.
USB Device not recognised
This is known to happen at times win Windows, and not just for the TYTN2 but a myriad of devices.
The fastest fix for this:
Reboot ur PC/ Laptop.
If this Doesn't help - Then add in a reboot for the TYTN 2 also.
The problem will go away for some time.
I know its annoying, but this is way faster than troubleshooting for contacting MicroShaft Support.
axeman said:
This is known to happen at times win Windows, and not just for the TYTN2 but a myriad of devices.
The fastest fix for this:
Reboot ur PC/ Laptop.
If this Doesn't help - Then add in a reboot for the TYTN 2 also.
The problem will go away for some time.
I know its annoying, but this is way faster than troubleshooting for contacting MicroShaft Support.
Click to expand...
Click to collapse
Unfortunately this is no soution for me. I seem to have this problem as well, since about two weeks.
I use two notebooks (Dell & Acer) and both do not show any activity when connecting my Kaiser to the original USB cable. The device is not even switched on when I connect it, nor does this happen when I connect it to the (original) cable in my car, which did work before.
Charging works fine, both in the car and when connected to both notebooks, but no Sync at all.
I have tried another USB-cable with the same result, so I suspect some hardware-problem causing me to be unable to copy files between my notebook and my phone and worse, rendering me unable to flash a new ROM onto it.
Who knows what to do next?
I am mystified, too. USB Charging and audio connections work. I have rebooted my computer and done a soft reset on my phone several times, to no effect. I uninstalled and reinstalled Windows Mobile Device Center. Still nothing at all via USB. Once, yesterday, I somehow got a Bluetooth connection long enough to sync, but haven't been able to since then. Even then, Windows Media and AudibleManager couldn't see the phone. The really weird thing is, I can see the phone connection in my Bluetooth manager, but even with all the proper boxes checked, I can't sync. When I try from my device, I get an empty progress box which disappears after a fraction of a second. When I try from my computer, it says the device is not connected, but doesn't give me any option to connect.
Would a hard reset help?
If so, would returning an unlocked AT&T Tilt to factory defaults lock it back up? And what do I do if it does?
Please help!
J. Georgia
I have had similar problems with my touch pro in the past, even bluetooth internet sharing eventually gave up the ghost.
I tried a myriad of leads and then eventually reinstalled active sync- which did the trick.
USB sync not working
[email protected] said:
I am mystified, too. USB Charging and audio connections work. I have rebooted my computer and done a soft reset on my phone several times, to no effect. I uninstalled and reinstalled Windows Mobile Device Center. Still nothing at all via USB. Once, yesterday, I somehow got a Bluetooth connection long enough to sync, but haven't been able to since then. Even then, Windows Media and AudibleManager couldn't see the phone. The really weird thing is, I can see the phone connection in my Bluetooth manager, but even with all the proper boxes checked, I can't sync. When I try from my device, I get an empty progress box which disappears after a fraction of a second. When I try from my computer, it says the device is not connected, but doesn't give me any option to connect.
Would a hard reset help?
If so, would returning an unlocked AT&T Tilt to factory defaults lock it back up? And what do I do if it does?
Please help!
J. Georgia
Click to expand...
Click to collapse
I've had the same problem with my first Tilt. There's multiple threads that detail this known problem. Some seem to be due to bent pins, some are general hardware failures (possibly the USB controller). There are some HardSPL images out there that have a "force usb" option enabled. This never worked for me, but it might be worth a shot for you.
...a word of warning....
If you end up reflashing your phone (via MicroSD) and the flash goes bad, you may be stuck, as many of the solutions for repairing a bad flash require you to USB sync. My first Tilt was a victim of this after a bad stock ROM flash that left my device without audio, and unable to flash via MicroSD.
replace usb board
you need to replace your usb board. It will run you less than $10 if you do it yourself. you can get the board on ebay
really? 4 years later?
Hi All
I'm at boiling point!
I have a new HTC Touch Diamond locked to the Orange Network and I am trying to unlock the phone. I have got the software to unlock it from this website (thank you very much) however I am having serious problems connecting my device to my laptop. I have installed the Active sync 4.5 software that came with the phone but when I connect my HTC to the laptop it is not registering at all with the computer never mind the Active sync software.
I have tried to uninstall and reinstall Active sync but to no avail. I have also disabled my antivirus software (AVG Internet Security). This is becoming very frustrating. I am aware that I can purchase an unlock code remotely but even if I do this there is still the problem of establishing a connection with my laptop.
Please if anyone can help me I would greatly appreciate it.
Lid
lydiamcl said:
Hi All
I'm at boiling point!
I have a new HTC Touch Diamond locked to the Orange Network and I am trying to unlock the phone. I have got the software to unlock it from this website (thank you very much) however I am having serious problems connecting my device to my laptop. I have installed the Active sync 4.5 software that came with the phone but when I connect my HTC to the laptop it is not registering at all with the computer never mind the Active sync software.
I have tried to uninstall and reinstall Active sync but to no avail. I have also disabled my antivirus software (AVG Internet Security). This is becoming very frustrating. I am aware that I can purchase an unlock code remotely but even if I do this there is still the problem of establishing a connection with my laptop.
Please if anyone can help me I would greatly appreciate it.
Lid
Click to expand...
Click to collapse
...on you phone: Settings/Connections/USB2PC: disable advanced network features!
Hi Cyron_at
Thanks for replying. I should have mentioned that I had tried that. Still no joy. Any other suggestions?
uninstall activesync
install activesync
connect phone
wait 10 mins....
if still not connected, run activesync on ur phone and check connection etc.
have u charged the phone in the car?
Thanks for that. Will try to do that when I get home as my work computer is running on Vista.
No I have not charged it in a car.
I am downloading Microsoft Windows Mobile Device Center 6.1 Driver for Windows Vista at the moment. I'm going to see if i can connect here at work. Do you think i should try this or wait until i get home and try it on my XP laptop? Could this cause problems switching between the two?
shouldn't cause a problem.
i asked about charging in the car, as there is a generic problem with HTC phones which means that if they are charged in a car whilst the car is being started a high current can blow the USB circuit, meaning it will charge, but not sync.
worth keeping in mind
Hey Mugggle
Have finished installing Mobile centre for vista and I'm experiencing the same NO SYNC problem. Does you earlier suggestion of leaving the phone connected for 10 min apply to this software?
By the way thanks for the Car tip!
not sure, it usually applies to slower PCs, as it has to load the drivers, which can take a while
make sure you've fully uninstalled active sync from ur laptop, it doesn't like being installed in parallel to mobile device centre
I will try that at home. do you have any suggestions on how to get my phone synced using vista? I;m still having the same problems.
lydiamcl said:
I will try that at home. do you have any suggestions on how to get my phone synced using vista? I;m still having the same problems.
Click to expand...
Click to collapse
sorry, haven't tried syncing with Vista
mugglesquop said:
i asked about charging in the car, as there is a generic problem with HTC phones which means that if they are charged in a car whilst the car is being started a high current can blow the USB circuit, meaning it will charge, but not sync.
Click to expand...
Click to collapse
That would be an overvoltage, not current. However, the USB adapter should have some regulation of the input voltage. So I am a bit skeptical, even though it could be a potential risk, no doubt about it.
My situation:
I use ROM 1.93
I charge my HTC Diamond Touch often in the car. It's connected while I start the car.
I had no sync problems when the phone was new.
Sync didn't work at all after some weeks.
File transfer via USB is no problem at all.
Since 1.93 seems buggy with a string of problems I was getting desperate to update the ROM. With no Sync it's not that easy. So I tried a direct motherboard USB port, plus a very short 20cm USB cable - and it worked!
If nothing sync, try that rear PC USB port and get those ultra short USB cable.
Interestingly, sync works again with any port and any cable with ROM 2.03.831.2 WWE
Firewalls & Ports
Make sure you have windows firewall settings all disabled. I had the same issue... fixed when I turned the firewall off.
mugglesquop said:
shouldn't cause a problem.
i asked about charging in the car, as there is a generic problem with HTC phones which means that if they are charged in a car whilst the car is being started a high current can blow the USB circuit, meaning it will charge, but not sync.
worth keeping in mind
Click to expand...
Click to collapse
do you mean this in real?
i just realized that i yesterday did charge the phone in car and today it is not sync at all!
it's a warranty issue?
because the phone is useless
thank you
I'm having the same trouble, My XDA vario 3 (t-mobile in UK) charges via the USB cable only. My home and work PC's are not picking up the connection. Not even to view file contents via explorer.
What can I do to fix this, as I've preformed a hard rest in the hope of solving this problem and now have a blank phone.
I've not charged my phone in a car. But t is around 18 months old.
My computer didn't find my Diamond after I hardreseted it so I had to reinstall Active Sync to get it working again. Strange that this didn't help you.
lydiamcl said:
Hi All
I'm at boiling point!
I have a new HTC Touch Diamond locked to the Orange Network and I am trying to unlock the phone. I have got the software to unlock it from this website (thank you very much) however I am having serious problems connecting my device to my laptop. I have installed the Active sync 4.5 software that came with the phone but when I connect my HTC to the laptop it is not registering at all with the computer never mind the Active sync software.
I have tried to uninstall and reinstall Active sync but to no avail. I have also disabled my antivirus software (AVG Internet Security). This is becoming very frustrating. I am aware that I can purchase an unlock code remotely but even if I do this there is still the problem of establishing a connection with my laptop.
Please if anyone can help me I would greatly appreciate it.
Lid
Click to expand...
Click to collapse
i had a touch and n ow Ihave a touch diamond and constantly had a problem with it not wanting to sync but here is what i do and it does work
i disconnect the phone from usb port
turn phone off
go into computer task manager and end the 2 active sync processes
then i restart active sync
then reconnect the phone and turn phone on
Everytime I flash a ROM, my Tilt won't sync. I plug it in and the computer doesn't recognize anything. Bring up ActiveSync on the Tilt and it tells me that I need to install the software on the computer.
Anyone know what I can do to fix this?
USB settings...
Try changing the "advance USB connection" under the USB configuration... For some reason on my WindowsXP desktop it must be UNCHECKED but on my Vista laptop it must be CHECKED... if I do not make the change it will not do anything (you hear the connection sound but it never recognizes the device)... works great otherwise. Hope it helps.
ok I unchecked the box and that made it recognize the device (it says "connecting...authenticating" on the Tilt) but it still doesn't show up on the computer except for a "safely remove hardware" thing pops up in the bottom.
Sounds like you need to update/upgrade your MS Activesync. Also make sure that Activesync is actively running on your Tilt (running in task manager). The new(er) taskmanager will close all programs including activesync even in the middle of a sync if you hit the close-all (x).
No, I have the latest version on my computer. That's not the problem. And it's definitely open on the Tilt.
Sorry but I'm out of idea's only thing I can think of is an error when you flashed the ROM I had a similar problem before I flashed my ROM. When I was unlocking my phone I had the same problem but it corrected itself after I flashed the ROM try reflashing the ROM or a deferent ROM.
Have you gone through the whole "Detection" process on your computer? Tried plugging the phone in directly (not through a usb hub), etc? And lastly, delete the association and then plug it in again?
Since I moved to 6.1 I've had a lot more trouble with ActiveStink. Most of the time it doesn't recognize the phone first thing, but I found that plugging the phone directly to the computer makes it work better. Why I need to do this now and never did before I don't know.
Bluetooth also sometimes is more reliable for me.... but sometimes not! AS is very annoying, and gives zero information when it fails.
hi,
I think my cable or port on my diamond is a little screwed, active sync stopped working just a week after I got the phone.
I posted the problem here:
http://social.microsoft.com/Forums/...c502e361-e0e4-4d26-9ead-7f2680ff160e/?lc=1033
I got Nothing so far. I did all the active sync troubleshooting I could when I noticed that when I charged my phone, the dialog to choose active sync or disk driver shows up!!? As if i plugged it into a pc, also I do plug is into any ANY pc as a Disk Drive, it doesn't work at all.
IOW.. when I connect my phone to *charge* a dialog shows up asking me whether I want Active Sync or Disk Drive as if i connected it to my PC. Nothing happens after that, and it will not connect to active sync or disk drive to ANY Pc (tried multiple pcs).
What could the problem be? Should I try htc tech support?
Please help, this phone is only a month old!
Thanks so much
Gideon
Ok.....I'm not sure what you're trying to say. What's the message you get on your screen when you connect your phone to the pc via activesync?
I'm sorry, I was freaking out just a little while writing that. I rephrased some of it.
I get the same dialog "Active Sync or Disk Drive" when I connect it to my PC, but nothing happens after that, and it doesn't work on any pc at all. And its driving me nuts, to send a file to my phone from my desktop(my main computer) I have to connect it to my laptop via a lan wire, then send the file over there, and send it from the laptop via WiFi to the phone! ! =X
Oh btw, I've also tried other mini USB cables. Same thing.
Thanks so much
Gideon
What version of activesync are you running? Download the latest version from here. Activesync runs on all OS versions from Win 2000 SP4 upto XP SP3. If you have Vista installed on your machine try this link.
Would you be able to paste a screen shot of the error message and the dialog box?
I use the latest 4.5, but that does'nt seem to be the problem.
It doesn't work as a Disk Drive on ANY computer? There isn't any message or error, on the phone I get the dialog "Connect To Pc" dialog, I choose DISK DRIVE but it doesn'nt work, not on MY pc not on ANY PC!! ='( And just nothing happens.
I've given up on active sync, i've read every post here on xda and elsewhere, I simple can't get it working, I don't have active sync on my pc now. On my laptop with *Vista* however, the windows mobile device center manages to connect and sync with my phone via *bluetooth* only
Thanks so much.
Gideon
Take out the memory card from your phone before connecting it to activesync and try again. Tell me what happens.
[email protected] said:
Take out the memory card from your phone before connecting it to activesync and try again. Tell me what happens.
Click to expand...
Click to collapse
You cant take out the diamond's memory, it's build in internal memory m8, not like the touch pro's microsd or anything so he wouldnt be able to try/ do that
I've had active sync problems as well, I normally find it's simply the sh*tti microsoft OS's/ programme's problem & if you re-install or update the active sync prog or windows mobile centre if your using vista, it then see's the diamond again no problems & let's you then set it up correctly, so I'd try all that 1st before you go phoning htc or your carrier to complain m8
Had the exact same problem with my Diamond.
The fix was; return to reseller/change of mainboard in the phone.
A known problem with some Diamonds according to the technician who did the repair.
Humm, I ran into a similar problem with my Diamond when I bought it less then a week ago. Nothing happened when I connected the with the bundled cable though it did work at first. So I took a normal one (from the ps3 controller to be exact) and it worked fine, I've not messed with the bundled cable since.
Solution for me
Hi,
I had this exact problem, wouldn't sync with any PC/laptop tried all the active sync's and tried all the options in there. Also tried multiple cables and still no joy.
This needs sending to HTC for them to fix. Go here:
http://service.europe.htc.com/Tracking.aspx and book it in for repair.
This is a known fault that happens with these phones and they fix it without charge.
However, don't be like me and try and fix it yourself, otherwise you'll be £70 lighter. I thought one of the mini usb prongs wasn't making contact (as it still charged ok) and after messing about the little plastic in the mini usb port came out. HTC said I damaged it and so had to pay for repair. If I had just left it alone they would have fixed it.
Also when they fix it they should load on for you Rom 1.93 which I'm finding is making the phone so much better. Its worth the money I've had to pay just for that TBO its soooo much slicker now.
The reason why this fault has developed (that some people have said) is that some car chargers are delivering too much power for the port especially when plugged into the car charger and then starting your car. I've seen that the normal charger delivers 5 volts and 1 amp so i've bought a car charger that does the same volts/amps from here:
http://www.dealextreme.com/details.dx/sku.688~r.53733725
I've used it once and it hasn't fried my Diamond yet. (it did however come up asking to activesync or usb drive when it was plugged in unlike the standard charger which doesn't prompt at all)
You also buy the official car charger which is more £££
You'll be without your phone for a week at least and you'll have to install your apps on it again.
Hope that helps
Hi,
I know this is an old thread, but thought i would add what i found as google brings this thread up when you search for this issue. I read through the solutions and through i would remove and reinstall mobile device centre. I found it had gone! Dont know why. I didnt uninstall it and havent ran a system restore etc. Anyway i reinstalled it and problem solved I think Bluetooth might have also been interfering.
Having this problem:
When device is connected to any PC, nothing is detected at either end. Nothing happens (except power to the phone).
Tried switching between activesync and disc drive modes, with or without advanced network functionality, but the problem is prior to that.
I have to say these WM devices are pretty unreliable, I've had USB problems on more than one of them, compared with none on any other usb device.
Grateful for any help.
when you say you change modes, do you mean that you change it in the settings or when you connect the USB a screen pops up?
I am having the same issue. My phone is basically useless, I don't have warranty to send it back to HTC either.
Many people are having issues with connecting with Windows 7. I think there are solutions, but most of those people don't post replies when they solve their problems...
I have been able to connect to Windows XP, then suddenly one day it stopped for no apparent reason. So I don't think the OS is the problem in this case.
how about your guys try to checke the windows firewall setting first?
on the exception list, make sure all related activesync task are selected.
then try again.. hope that help
Tried that - in fact, turned off my firewall entirely - still no luck.
Device connects, and comes up as an "unknown device". Nothing else in Windows 7 sees it - not WMDC, or File Explorer, or anything.
This is really disappointing - how can a Windows Mobile device not work at all with a Windows OS?
i also have my firewall turned off, even worse thing is that the computer doesn't even recognize that a device has been plugged.
Same here, shaks 4.3 ...
I can't believe that Windows has this device listed as compatible with Windows 7. It isn't working, period.
mine stopped connecting to vista one day but would charge. I went an got another usb to mini usb cord at the PX and plugged it in and it now connects with my laptop and my mac. replace your cord before you start hard reseting.
romagnus said:
mine stopped connecting to vista one day but would charge. I went an got another usb to mini usb cord at the PX and plugged it in and it now connects with my laptop and my mac. replace your cord before you start hard reseting.
Click to expand...
Click to collapse
I've tried several cords... but thanks for the advice.
i contacted HTC and asked them how much for repair w/o warranty, this is their response:
We apologize for any issues you are experiencing with your device and would be happy to assist. While warranty coverage would depend on a diagnosis by one of our certified technicians, based on the problems symptoms you have provided, costs for repairs could range from approximately $373.00 to $428.00. Please contact Customer Care at 1-888-617-1113 for service options and to set up an RMA for repair if desired.
this is hilarious, fking HTC ppl make sh*t w/ no technical support and charge ridiculous for repairs. i dont know what they thinking
had the same problem...tried everything to fix. i am with Verizon. Went to my Verizon store. They called in for me which resulted in Verizon sending my a replacement (refurb) which ironically(?) turned out to have a different issue. Back to store...another call...sent me a brand new diamond. everything ok so far. don't deal with htc....go to your carrier.
I've done a hard reset on my diamond, but the usb problem remains. Now I'm thinking it's a mechanical problem. I'll try and clean out the hole somehow and see if that helps.
I'm using windows 7 64 bit and the latest Windows Mobile device Centre with the Windows Firewall on and I have no problems connecting my HTC HD and Diamond.
To all of you who still struggle on UBS connection.
Here's my solution based on reading forums for almost two weeks and trying hundreds of settings. I'm using Windows 7 Ultimate.
First you have to set regional settings on both PC and device on English.
1. Make suse you select ONLY ActiveSync under Settings/All Settings/Connections/USB to PC/ NO OTHER SELLECTIONS.
2. Tick "When the device is turned on, do not ...." under Settings/System/Power ( later, when establish connection for couple times you can uncheck it)
3. If Using NOD 32 disable Treat Sence and Disable detection of Potentionaly dangerous programs ( if using other antivirus disable similar options - they block connections they think are dangerous)
4. On your PC Uninstall ALL USB controlers and Hubs.
5. On Your device on home screen check and stop all programs running.
6. Turn OFF PC.
7. Connect USB cable to PC USB port and to phone.
8. Turn on PC and wait untill Windows instals all the usb stuff. If everything is OK Windows should recognize and install HTC PPC .... The WMDC or ActiveSync should start automatically. IF not start it manually and disconnect and connect usb cable on ppc. Wait untill it connects and HAVE FUN !!!
First couple of times you should be carefull not to move the phone or cable so you wont lose connection.
Hope this helps others, since I managed to get it work for myself.
Happy New Year to all of You!
will try this tomorrow,
btw, what's NOD32 and WMDC?
thanks for the post
OS -> Windows 7
PPC-> Mobile 6.1
Unchecked the "Enable advanced network functionality" box.
Until that it would connect just under Disk Drive option, Now it runs just fine with active sync too. Thank you