Diamond TF3D Config Please Help!!!!! - Touch Pro, Fuze Themes and Apps

ok so i installed diamond tf3d config on my sprint htc touch pro but when i try to start it it says " Error, NullReferenceException" the one of my friends said that i should try installing Microsoft Net CF but that didn't do anything either. Please help me find out wats wrong!!!!

To bad my Cristal Ball is still away for calibration...
What rom are you using? (my guess: default)
What .Net CF did you Install?
Did you do a soft reset after the .Net CF install?
Did you try a uninstall / fresh install of the Diamond TF3D config?
Did you Search?

nevermind
nevermind i got it to work by deleting the tweaks.xml file thx though

Related

Help reinstalling .NET 3.5

Colleagues,
I have some problems with some apps that tell me that I need a newer version of .NET than the one installed even though I have 3.5. So I uninstalled .NET 3.5 and did a soft reset. When I try to install it again it tells me that "the .NET Compact Framework version you are attempting to install already exists in ROM".
What did I do wrong and do I need to do?
Thanks in advance.
jdomi99 said:
Colleagues,
I have some problems with some apps that tell me that I need a newer version of .NET than the one installed even though I have 3.5. So I uninstalled .NET 3.5 and did a soft reset. When I try to install it again it tells me that "the .NET Compact Framework version you are attempting to install already exists in ROM".
What did I do wrong and do I need to do?
Thanks in advance.
Click to expand...
Click to collapse
In case anyone runs into the same issue here is why I could not reinstall: When you first install 3.5 the instructions tell you that at the end you need to change the registry so that 2.0 is turned off (with a 0) and 3.5 is turned on (with a 1). If you uninstall 3.5 the registry is left untouched, meaning that 3.5 is still on; that's why the message that the version already exists. So, I had to go in, reverse the registry: turn off 3.5 and turn on 2.0; now I was able to reinstall 3.5 successfully.

Xbmode cause manilla.exe to crash. urgent!

Im so sorry, im not the kind of person that makes treads and post them as urgent. But this is truly urgent.
I have .net 3.5 cf installed on my phone, i then installed xbmod policy.cab and restarted. Disabled tf3d, installed XBmod VGA Rhodium Manila.cab, rebooted and installed HTC New Contact Card.cab. Once again i reboted, installed Start menu fix.cab and the reboted again. Then i enabled tf3d.
But it all crashes everytime! Manilla.exe crashes and gives a report
'Microsoft.VisualBasic recources not found.
Please im going away and i really need the phone to be working.
I also have sdkcerts installed and i have pressed the reset button with the stylus a couple of times
I would just reflash the ROM or try another ROM altogether that already has Manila 2 already on board. There are 2 in existence. One I am currently using and it works great.
First of all some background please.
Do u have Hard SPL already installed?
band27 said:
I would just reflash the ROM or try another ROM altogether that already has Manila 2 already on board. There are 2 in existence. One I am currently using and it works great.
First of all some background please.
Do u have Hard SPL already installed?
Click to expand...
Click to collapse
No, I have the 2..03.413.2 SVE room, the original from HTC.
Im to afraid to try cooked rooms.
pking said:
No, I have the 2..03.413.2 SVE room, the original from HTC.
Im to afraid to try cooked rooms.
Click to expand...
Click to collapse
then try again to install xboxmods rhodium manilla... well remember to go to settings>today and disable touchflo 3d before you install... then try installing it all again....
Arju007 said:
then try again to install xboxmods rhodium manilla... well remember to go to settings>today and disable touchflo 3d before you install... then try installing it all again....
Click to expand...
Click to collapse
Thats the fun part. Ive done that two times now :/
pking said:
Thats the fun part. Ive done that two times now :/
Click to expand...
Click to collapse
Many members went through this already. Learn from their mistakes ......PRESS HERE
If you have an original ROM then it may be that you don't have NET 3.5 Framework, yes?
yeah that must be it... lol ... hope that's his answer.. i remember my stock rom didn't have that but all the custom i've used has it cooked in..
Just go "Cooked" and you will never go back...lol
We can set up a day where I will help u through if you wish...
You know what. I will hard reset it.
Install xbmod policy.cab
Disable the plugin
Install XBmod VGA Rhodium Manila.cab
Soft reset
HTC New Contact Card.cab
Soft reset
enable tf3d today plugins
Is it all correct?
No i have .net 3.5 cf as i wrote in my first post.
Hey thanks man! but i have only had bad experience from cooked roms. And since my phone has gone in to service to get repaired 2 times i dont wat to risk getting a huge bill, you know they will make up that the rom was the one that destroyed the phone.
pking said:
You know what. I will hard reset it.
Install xbmod policy.cab
Disable the plugin
Install XBmod VGA Rhodium Manila.cab
Soft reset
HTC New Contact Card.cab
Soft reset
tf3d today plugins
Is it all correct?
Click to expand...
Click to collapse
No matter how many times you do this, it won't work without Netframework 3.5.
band27 said:
No matter how many times you do this, it won't work without Netframework 3.5.
Click to expand...
Click to collapse
I had installed this:
http://www.microsoft.com/downloads/...49-3C6B-42F1-9FD9-0041345B3385&displaylang=en
Does me having a swedish rom affect anything?
pking said:
I had installed this:
http://www.microsoft.com/downloads/...49-3C6B-42F1-9FD9-0041345B3385&displaylang=en
Does me having a swedish rom affect anything?
Click to expand...
Click to collapse
Regardless of what language your ROM is, will not impact your devices ability to install manila 2
pking said:
You know what. I will hard reset it.
Install xbmod policy.cab
Disable the plugin
Install XBmod VGA Rhodium Manila.cab
Soft reset
HTC New Contact Card.cab
Soft reset
enable tf3d today plugins
Is it all correct?
No i have .net 3.5 cf as i wrote in my first post.
Hey thanks man! but i have only had bad experience from cooked roms. And since my phone has gone in to service to get repaired 2 times i dont wat to risk getting a huge bill, you know they will make up that the rom was the one that destroyed the phone.
Click to expand...
Click to collapse
No, don´t softreset after installing VGA rhodium manila.cab - just hit continue or cancel (I don´t remember..) and proceed with the HTC new contact Card.cab. and then softreset.
This is from the installation instructions in post #3
Hope this helps..
jonorb said:
No, don´t softreset after installing VGA rhodium manila.cab - just hit continue or cancel (I don´t remember..) and proceed with the HTC new contact Card.cab. and then softreset.
This is from the installation instructions in post #3
Hope this helps..
Click to expand...
Click to collapse
No freaking difference. This has driven me mad.

is there any way to install Microsoft NET CF 3.5 on touch pro?

I have tried many methods posted on this website, i am currently using a romeos rom 6.1 1.971.....it is getting very frustrating now, all i am trying to use this program for is Gremote......any suggestions would be greatly appreciated and i tried to install Microsoft NET CF 3.5 on touch pro it tells me i need more storage space and a support number 3....ANYONE PLEASE HELP MEE
I have renamed mscoree.dll to various things including mscoree.backup.dll and mscoree.dll.txt same issues, still cannot install this program, is there way around it so i can still install and work the gremote?
I've had this problem with romeos also and i searched through whole xda and i found this:
1. You should shut down manila.
2. Then soft reset.
3. Uninstall your old net. 3.5 if possible (program/remove under system settings)
4. Start a regeditor and delete in the registry this map: HKLM/Software/microsoft/.NETCompactFramework
5. Soft reset again and try installing net 3.5 again.
If it doesn't work repeat al this again and sometimes you have to try installing it twice times, and soft reset some more again and then remove again the registry stuff. and try install it again and again. It worked with me.
Hope it helps
sorry im a newbei i dont know how to shut down manila, how would i be able to do that, and where can i find a regeditor...thanks alot
Hey i got it!!!!!!!!!!!! THANKS A BUNCH
well i got it to install that was about it i couldnt really function it or where to fin dit on my touch pro, i then installed g remote that wouldnt work ...oh well i give up spent way too much time on this peice of s*&*^
I installed the .net on my touch pro and the only way you can tell if it is installed is if you go to start-settings-system-remove programs. There is a list of everything you have installed. From there you should be able to run programs that need the compact framework in order to work.

beejive starting -> netcfv35.messages.de.wm.cab

hey guys.
when i try to start the pre installed beejive with my raphael with win mobile 6.5 (EnergyROM 3.0 'Phoenix' (21812)) there is some wired message telling me to download the "netcfv35.messages.de.wm.cab" to get the full error. i have done this. still same ****. havent found anything on inet/xda developers. tried SEVARAL roms/win mobile versions. still no solution. i am wondering if i am the only one.....?!
what i am wondering about is: why does this app tell me to download the DE version(is the code for deutschland - germany). well i am german. but how does the raphael know? i havent installed a german tool. nothing!
maybe some solutions or suggestions!
ty in advance
I dont think beejive works with WM6.5. i had the same prob and had to stop using it. Maybe theres a work around?
EDIT: i was looking for something else and came across a fix for it i tried it out and it works! heres the link
http://forum.xda-developers.com/showthread.php?t=421821
have the same error with win mobile 6.1.
also it is pre installed on a 6.5 rom. why should the chef do this if it would not work?!
i tried the same patch few days ago. didnt worked for me. how have you done it?
beejive was pre installed. than i installed the 1. LennySh_SQLCEMobile_3.0.CAB after this the 2. BeeJive_Fix.CAB
still same error..
I had the same issue, and also with TrackMe. The Energy ROM I'm using has .NET 3.7 cooked in. I got BeeJive (and TrackMe) working by installing .NET 3.5 and SQLServerCompact 3.5 core. Once I installed them, both BeeJive and TrackMe worked without any problems.
ocblazer949 said:
I dont think beejive works with WM6.5. i had the same prob and had to stop using it. Maybe theres a work around?
EDIT: i was looking for something else and came across a fix for it i tried it out and it works! heres the link
http://forum.xda-developers.com/showthread.php?t=421821
Click to expand...
Click to collapse
worked like a charm
adoute said:
I had the same issue, and also with TrackMe. The Energy ROM I'm using has .NET 3.7 cooked in. I got BeeJive (and TrackMe) working by installing .NET 3.5 and SQLServerCompact 3.5 core. Once I installed them, both BeeJive and TrackMe worked without any problems.
Click to expand...
Click to collapse
I have just installed the latest version of windows 6.5 energy rom and can no longer get pockettwit to work get the NETCFv35.Messages.EN.wm.cab error. Installed the cab but still dont get the complete error msg. So is the problem because the rom has .NET 3.7 cooked and not .NET3.5? If so is the solution the same as you have above? and if so where i do i find .NET 3.5 an SQLServer...
and install them?
Love the new energy ROM so much quicker etc - though does eat the power
These are the cabs I used to install .NET 3.5 and SQLCE on the 2009/6/13 Energy ROM (standard). I simply installed .NET, then SQLCE, then soft reset. BeeJive (and TrackMe) worked fine after the soft reset. I did not do anything else - both the cabs installed fine.
The forum won't let me attach the .NET cab... The filename is "NETCFv35.wm.armv4i.cab". I'm sure that I found it somewhere here at XDA, so it shouldn't be too hard to find.
nope.
I installed .NET, then SQLCE, did NOT work. (using energy rom 3.0)
maybe someone is going to need this:
NETCFv35.wm.armv4i.cab
http://rapidshare.com/files/77805623/NETCFv35.wm.armv4i.cab
edit
and YES i did a soft reset..
zotero said:
nope.
I installed .NET, then SQLCE, did NOT work. (using energy rom 3.0)
maybe someone is going to need this:
NETCFv35.wm.armv4i.cab
http://rapidshare.com/files/77805623/NETCFv35.wm.armv4i.cab
edit
and YES i did a soft reset..
Click to expand...
Click to collapse
Strange. It has worked for me 3 times in the last 10 days (trying various software, not liking it, hard reset).
The only thing I can think of is that my sashimi autoconfig installs the SQLCE cab. After sashimi has finished, and I've done some manual tweaking, I soft reset, install .NET 3.5 & SQLCE, soft reset, then everything just works. It is possible that there is a soft reset between .NET and SQLCE - I'm not entirely sure, but its worth a try.
Thanks for linking the .NET cab. For what it's worth, the version I install is 2.58 MB (2,707,308 bytes). Is it possible that yours is different?
I hope you find a way to get it working.
this file got exactly 2,707,308 bytes, too.
well. now i am going to deinstall beejive SQLC an .NET. then install SQLC (softreset) .NET (softreset) beejive (softreset).......nope. still not working. damn it.
just realized that msn is working. maybe my icq contact list is too big? going to try an other account..
edit
icq with 5 contacts working fine. WTF!?
this post is really old. but now i found out whats the problem:
after A LOT of research i GUESSED that a problem might be some strange user names in my contact list. i am talking about characters like this ****: ÐØΓťšĹĦĨ (just examples..)
i changed their 1337 h4xx0r!!1111oneone names into something normal...
now its working
maybe this is going to help somebody.
Minature BeeJive
Is anybody elses BeeJive realllllly small when you enter the chat feature like so minature you can barely see the avatar or is it just mines? Thats the only thing i HATE about the Fuze does anybody have a fix or a tweak thanks
after installing google traslator i get massge i have to install first NETCFv35.win.armv4i.cab
yet wile installing the NETCFv35 i get error i need first to start google this is catch22 !!!
any help ????/
thanks
baki69
NETCFv35.Messages.EN.wm.cab
If you are having trouble making the error messages to work with NETCFv35.Messages.EN.wm.cab you might want to try to remove \Windows\System.SR.dll (backup, of course) and then installing the messages cab.
NETCFv35.wm.armv4i.cab and others...
im doing a forum search to try to find out what these netCFv..etc files are for but havent really figured it out. there are a few different ones out there, dont even know which I would need.
Ive also had programs tell me to install these net files before, but Im hesitant to start searching out and installing things I dont understand.
Im using stock rom (havent updated yet) for T Mobile USA HD2, with Cookies installed.
Any love for a noob?
zarp said:
If you are having trouble making the error messages to work with NETCFv35.Messages.EN.wm.cab you might want to try to remove \Windows\System.SR.dll (backup, of course) and then installing the messages cab.
Click to expand...
Click to collapse
i have the messages cab installed, well it tells me it is anyway
i get that same error BUT i can't locate the file you mention, where should it be ?

Advanced_Configuration_Tool_v3.3 does not work in opal

Hi
I installed Advanced_Configuration_Tool_v3.3.cab in touch viva (1.35.720.2 WWE) but it does not work.
I have installed dot net CF 3.5 but still no success.
I then tried AdvancedConfig_v2.0.2.0 it worked OK.
My issues is, any application that uses dot net CF 3.5 does not work.
In my installed program list, it shows dot net CF 3.5.
please help.
NS
try reinstalling a new CF3.5.
I did hard reset and then installed the CF 3.5 again.
I am using Vista and windows mobile device centre 6.1.
Still no luck.
Hi, which is the error that you are seeing? I have seen a parse error when connecting through wi-fi, but I tried using GPRS last week and worked....
Hi , I m using Advanced Config tool version 3.2.0.0
with .NET CF 3.5.7283.0. Initially i have make several attempts to install .NET CF 3.5. than after making a hard reset i made it. May be u can try another hard re set and than try to install it....

Categories

Resources