Xbmode cause manilla.exe to crash. urgent! - Touch Diamond, MDA Compact IV General

Im so sorry, im not the kind of person that makes treads and post them as urgent. But this is truly urgent.
I have .net 3.5 cf installed on my phone, i then installed xbmod policy.cab and restarted. Disabled tf3d, installed XBmod VGA Rhodium Manila.cab, rebooted and installed HTC New Contact Card.cab. Once again i reboted, installed Start menu fix.cab and the reboted again. Then i enabled tf3d.
But it all crashes everytime! Manilla.exe crashes and gives a report
'Microsoft.VisualBasic recources not found.
Please im going away and i really need the phone to be working.
I also have sdkcerts installed and i have pressed the reset button with the stylus a couple of times

I would just reflash the ROM or try another ROM altogether that already has Manila 2 already on board. There are 2 in existence. One I am currently using and it works great.
First of all some background please.
Do u have Hard SPL already installed?

band27 said:
I would just reflash the ROM or try another ROM altogether that already has Manila 2 already on board. There are 2 in existence. One I am currently using and it works great.
First of all some background please.
Do u have Hard SPL already installed?
Click to expand...
Click to collapse
No, I have the 2..03.413.2 SVE room, the original from HTC.
Im to afraid to try cooked rooms.

pking said:
No, I have the 2..03.413.2 SVE room, the original from HTC.
Im to afraid to try cooked rooms.
Click to expand...
Click to collapse
then try again to install xboxmods rhodium manilla... well remember to go to settings>today and disable touchflo 3d before you install... then try installing it all again....

Arju007 said:
then try again to install xboxmods rhodium manilla... well remember to go to settings>today and disable touchflo 3d before you install... then try installing it all again....
Click to expand...
Click to collapse
Thats the fun part. Ive done that two times now :/

pking said:
Thats the fun part. Ive done that two times now :/
Click to expand...
Click to collapse
Many members went through this already. Learn from their mistakes ......PRESS HERE

If you have an original ROM then it may be that you don't have NET 3.5 Framework, yes?

yeah that must be it... lol ... hope that's his answer.. i remember my stock rom didn't have that but all the custom i've used has it cooked in..

Just go "Cooked" and you will never go back...lol
We can set up a day where I will help u through if you wish...

You know what. I will hard reset it.
Install xbmod policy.cab
Disable the plugin
Install XBmod VGA Rhodium Manila.cab
Soft reset
HTC New Contact Card.cab
Soft reset
enable tf3d today plugins
Is it all correct?
No i have .net 3.5 cf as i wrote in my first post.
Hey thanks man! but i have only had bad experience from cooked roms. And since my phone has gone in to service to get repaired 2 times i dont wat to risk getting a huge bill, you know they will make up that the rom was the one that destroyed the phone.

pking said:
You know what. I will hard reset it.
Install xbmod policy.cab
Disable the plugin
Install XBmod VGA Rhodium Manila.cab
Soft reset
HTC New Contact Card.cab
Soft reset
tf3d today plugins
Is it all correct?
Click to expand...
Click to collapse
No matter how many times you do this, it won't work without Netframework 3.5.

band27 said:
No matter how many times you do this, it won't work without Netframework 3.5.
Click to expand...
Click to collapse
I had installed this:
http://www.microsoft.com/downloads/...49-3C6B-42F1-9FD9-0041345B3385&displaylang=en
Does me having a swedish rom affect anything?

pking said:
I had installed this:
http://www.microsoft.com/downloads/...49-3C6B-42F1-9FD9-0041345B3385&displaylang=en
Does me having a swedish rom affect anything?
Click to expand...
Click to collapse
Regardless of what language your ROM is, will not impact your devices ability to install manila 2

pking said:
You know what. I will hard reset it.
Install xbmod policy.cab
Disable the plugin
Install XBmod VGA Rhodium Manila.cab
Soft reset
HTC New Contact Card.cab
Soft reset
enable tf3d today plugins
Is it all correct?
No i have .net 3.5 cf as i wrote in my first post.
Hey thanks man! but i have only had bad experience from cooked roms. And since my phone has gone in to service to get repaired 2 times i dont wat to risk getting a huge bill, you know they will make up that the rom was the one that destroyed the phone.
Click to expand...
Click to collapse
No, don´t softreset after installing VGA rhodium manila.cab - just hit continue or cancel (I don´t remember..) and proceed with the HTC new contact Card.cab. and then softreset.
This is from the installation instructions in post #3
Hope this helps..

jonorb said:
No, don´t softreset after installing VGA rhodium manila.cab - just hit continue or cancel (I don´t remember..) and proceed with the HTC new contact Card.cab. and then softreset.
This is from the installation instructions in post #3
Hope this helps..
Click to expand...
Click to collapse
No freaking difference. This has driven me mad.

Related

Cant install Advanced Config on Dutty v2. HELP

Whenever I try to install advancedconfig it states "Installation of AdvancedConfig_v1.1.CAB was unseccessful. Does anyone know why this is happening or a solution"
it worked fine for me. are you using the latest version of advanced config?
bryangauvin said:
Whenever I try to install advancedconfig it states "Installation of AdvancedConfig_v1.1.CAB was unseccessful. Does anyone know why this is happening or a solution"
Click to expand...
Click to collapse
Try to download the cab again (from duttys cabs) and install it to the device not the storage card, hope that helps. I have 1.1 installed on mine and it installed fine.
doesnt work
Tried redownloading and the same thing. The message pops up before it gives you the chance to pick were to store it.
Im also having the same issue on Arcsoft MMS Composer v4.0.31.28.
Both were downloaded from Dutty's FTP server
bryangauvin said:
Tried redownloading and the same thing. The message pops up before it gives you the chance to pick were to store it.
Im also having the same issue on Arcsoft MMS Composer v4.0.31.28.
Both were downloaded from Dutty's FTP server
Click to expand...
Click to collapse
I know this may sound stupid but have you soft reseted the phone yet and then tried to install it from a fresh boot.
alltheway said:
I know this may sound stupid but have you soft reseted the phone yet and then tried to install it from a fresh boot.
Click to expand...
Click to collapse
funny, i just assumed that was what they were doing. You know what happens when we assume?
P1Tater said:
funny, i just assumed that was what they were doing. You know what happens when we assume?
Click to expand...
Click to collapse
As someone once told me...never underestimate the power of stupidity.
yes I tried the soft reset. I soft reset at least once a day.
any ideas out there???
bryangauvin said:
any ideas out there???
Click to expand...
Click to collapse
It should just install but try this, soft reset before you try attempting to install the cab.
Install sdckerts.cab in my cab collections
Soft reset
Install advance config
or try installing both versions of advance config to see if one installs
Hey Dutty,
First off thanks for your hard work on these roms. I tried installing sdckerts.cab and get the same message. Any other suggestions. Im now using your v3 test rom.
My Phone is Similar
It installs it, but doesnt save anything i do, just says "unable to apply changes" i have a focus flash btw

Can someone please help me using roms???

I recently got myself an X1, and I have to honestly say, its brill!
I am mainly using the spb shell panel, and like it for the reason that I can use my thick fingers to operate it. Is their any other user interfaces like this one?
Ok, I am a smart enough guy…(sometimes)…but I cannot for the life of me understand roms…and what you guys are going on about in these forums.
What I am looking for is a good selection of panels to choose from, however from what I can get from these forums is that I am better installing something completely different on the phone.. I assume this gets rid of my panels?
Do roms completely overwrite what is currenly on the phone? Ie. Panels, tomtom, etc.
Any tips would be much appreciated, as I am interested in a user interface that I can better customise to suit myself (cant customise spb mobile shell)…..
Thanks..
Roughly said a ROM is a collection of appz put in one file together with the WinMo OS.
What those appz are, and which version of winmo, totally depends on the creator of the custom cooked ROM. In the threads of the custom ROM is always a summary of what is included.
Most chefs delete the panels from their ROMs, except for the standard panels and the panelmanager. So you can install the panels you want to use.
When installing a new ROM (custom cooked or stock) it always deletes the phone memory, not your SD-card! So you need to install appz, change settings to your own need, and ofcourse put contacts, agenda, etc back from back-up.
Nice, thanks.
I think in that case that I will avoid them for now, as I do not have a good enough understanding of how it works. I will how ever make more of an effort to read into the process to understand how it will benefit how I use the phone.
Thanks for the heads up.
May I suggest you to read this thread:
(sticky thred, on top of the forum)
http://forum.xda-developers.com/showthread.php?t=477801
You'll find what you want to know
Ah, perfect. Thanks for the link!
Nice resource btw.
Goodluck...Enjoy Reading...
Ok, took the plunge, and installed a custom rom....
I installed Touch_IT v4.5 and it is excellent..however
Anyone else experiencing lots of crashes? I am getting lots of crashes for stupid things like trying to open the X panel....
Whats annoyed me most is that I have taken off the back cover so much to remove the battery (to restart) I have cracked the part under the camera :-(
Just out of interest...to convert back to the stock o2 UK rom do I simply download "X1i_GENERIC_UK_CDF1215-1832_R2AA010 - uploaded" from:
NEW ORIGINAL X1 ROMS (all released variants) update 14.3.2009
Then Hard SPL, and install this original rom?
Thanks..
djglenn1337 said:
Ok, took the plunge, and installed a custom rom....
I installed Touch_IT v4.5 and it is excellent..however
Anyone else experiencing lots of crashes? I am getting lots of crashes for stupid things like trying to open the X panel....
Whats annoyed me most is that I have taken off the back cover so much to remove the battery (to restart) I have cracked the part under the camera :-(
Just out of interest...to convert back to the stock o2 UK rom do I simply download "X1i_GENERIC_UK_CDF1215-1832_R2AA010 - uploaded" from:
NEW ORIGINAL X1 ROMS (all released variants) update 14.3.2009
Then Hard SPL, and install this original rom?
Thanks..
Click to expand...
Click to collapse
Yes, and yes.
Edit: You don't need to HARD SPL again before you flash it.
I believe that ROM is the generic SE one without any of the O2 branding.
If you need to return it for any reason you will need to reflash it with the O2 ROM (which I believe is available in the same thread as you found the one you pointed out).
You'll also need to change the hard spl back to the original.
Shame about the crack under the camera, did you know you can soft reset by holding down the power button for 3-5 seconds?
insom81 said:
You'll also need to change the hard spl back to the original.
Shame about the crack under the camera, did you know you can soft reset by holding down the power button for 3-5 seconds?
Click to expand...
Click to collapse
Thanks for the help.
How do I change the hard spl back to the original??
I do assume though there is no way to reset the phone when it has completely crashed, without removing the battery. Holding the power button down has no effect.
Its a shame as I love the touch-it 4.5 rom. I almost would live with it being unstable just for some of the features (i.e Camera with autoflash, and the touchflo 3D interface).
djglenn1337 said:
How do I change the hard spl back to the original??
Click to expand...
Click to collapse
In the Hard-SPL thread you can read how to change back to original spl.
djglenn1337 said:
Its a shame as I love the touch-it 4.5 rom. I almost would live with it being unstable just for some of the features (i.e Camera with autoflash, and the touchflo 3D interface).
Click to expand...
Click to collapse
Did you hard reset after flash, because I've been using Touch-IT 4.5 since the day after it was released and aren't experiencing big stability issues (hard reset is press the two directly under your screen and press reset button with stylo).
djglenn1337 said:
I do assume though there is no way to reset the phone when it has completely crashed, without removing the battery. Holding the power button down has no effect.
Click to expand...
Click to collapse
When the batterycover is removed there is a tiny hole next to the battery, you can use your stylo to press the reset button inside the hole (soft reset).
hard reset after flash? no...how do I do that?
As I didnt do it, will I have to reflash it again and then hard reset?
I dont understand "press the 2 under the screen" sorry...
Thanks again..
Hey guys I just too got an X1a and want to install this ROM: http://forum.xda-developers.com/showthread.php?t=485624 But still not really quite sure what to do. So I just download the ROM and ROMUpdateUtility.exe yes? (where can i find the rom update utility for the Xperia?) Then I just install it onto the phone? I know I hav to backup etc. Will this void the warranty though, will I be able to get it to factory settings if I want to change it back?
Thank you.
Need a reply asap..
Oh and is the Touch-IT good?
djglenn1337 said:
hard reset after flash? no...how do I do that?
As I didnt do it, will I have to reflash it again and then hard reset?
I dont understand "press the 2 under the screen" sorry...
Thanks again..
Click to expand...
Click to collapse
Hard reset:
1. turn off the phone
2. Hold both right and left buttons (the ones right under the screen, dont know the name)
3. press reset button with stylus, while still holding the others
tai927 said:
Hey guys I just too got an X1a and want to install this ROM: http://forum.xda-developers.com/showthread.php?t=485624 But still not really quite sure what to do. So I just download the ROM and ROMUpdateUtility.exe yes? (where can i find the rom update utility for the Xperia?) Then I just install it onto the phone? I know I hav to backup etc. Will this void the warranty though, will I be able to get it to factory settings if I want to change it back?
Thank you.
Need a reply asap..
Click to expand...
Click to collapse
Please read the sticky's in the ROM thread before trying to flash....
How to flash?
http://forum.xda-developers.com/showthread.php?t=446070
Hard-SPL
http://forum.xda-developers.com/showthread.php?t=431218
How to back-up your ROM.
http://forum.xda-developers.com/showthread.php?t=462926
Have fun reading....
Lokatho said:
Hard reset:
1. turn off the phone
2. Hold both right and left buttons (the ones right under the screen, dont know the name)
3. press reset button with stylus, while still holding the others
Click to expand...
Click to collapse
Ok, so the reset button is the one underneath the battery cover?
and the right and left buttons are the silver rectangular ones that you can assign as anything?
Should I reflash the phone and hard reset it then, or might hard resetting it now work?
djglenn1337 said:
Ok, so the reset button is the one underneath the battery cover?
and the right and left buttons are the silver rectangular ones that you can assign as anything?
Should I reflash the phone and hard reset it then, or might hard resetting it now work?
Click to expand...
Click to collapse
Hard reset without reflash should do the trick
ps remind that hard reset will set the OS back like it has never been used before
Curious on how revert the hardspl to original.
I'm new to all this as well,
I want to make registry edits, i downloaded the free trial Resco file explorer, which is supposed to be able to make reg edits, but i CANNOT (or simply i just dont konw how or where) find the HKCU folder. I can only see the regular Device folders, thats about it!! Where am i supposed to look at??
chris28j said:
Curious on how revert the hardspl to original.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=431218
chris28j said:
I want to make registry edits, i downloaded the free trial Resco file explorer, which is supposed to be able to make reg edits, but i CANNOT (or simply i just dont konw how or where) find the HKCU folder. I can only see the regular Device folders, thats about it!! Where am i supposed to look at??
Click to expand...
Click to collapse
Don't know Resco first handed, but looking at the screenshots (http://www.resco.net/pocketpc/explorer/indepth.asp) you should be able to enter the registry at the base of the folder tree.

beejive starting -> netcfv35.messages.de.wm.cab

hey guys.
when i try to start the pre installed beejive with my raphael with win mobile 6.5 (EnergyROM 3.0 'Phoenix' (21812)) there is some wired message telling me to download the "netcfv35.messages.de.wm.cab" to get the full error. i have done this. still same ****. havent found anything on inet/xda developers. tried SEVARAL roms/win mobile versions. still no solution. i am wondering if i am the only one.....?!
what i am wondering about is: why does this app tell me to download the DE version(is the code for deutschland - germany). well i am german. but how does the raphael know? i havent installed a german tool. nothing!
maybe some solutions or suggestions!
ty in advance
I dont think beejive works with WM6.5. i had the same prob and had to stop using it. Maybe theres a work around?
EDIT: i was looking for something else and came across a fix for it i tried it out and it works! heres the link
http://forum.xda-developers.com/showthread.php?t=421821
have the same error with win mobile 6.1.
also it is pre installed on a 6.5 rom. why should the chef do this if it would not work?!
i tried the same patch few days ago. didnt worked for me. how have you done it?
beejive was pre installed. than i installed the 1. LennySh_SQLCEMobile_3.0.CAB after this the 2. BeeJive_Fix.CAB
still same error..
I had the same issue, and also with TrackMe. The Energy ROM I'm using has .NET 3.7 cooked in. I got BeeJive (and TrackMe) working by installing .NET 3.5 and SQLServerCompact 3.5 core. Once I installed them, both BeeJive and TrackMe worked without any problems.
ocblazer949 said:
I dont think beejive works with WM6.5. i had the same prob and had to stop using it. Maybe theres a work around?
EDIT: i was looking for something else and came across a fix for it i tried it out and it works! heres the link
http://forum.xda-developers.com/showthread.php?t=421821
Click to expand...
Click to collapse
worked like a charm
adoute said:
I had the same issue, and also with TrackMe. The Energy ROM I'm using has .NET 3.7 cooked in. I got BeeJive (and TrackMe) working by installing .NET 3.5 and SQLServerCompact 3.5 core. Once I installed them, both BeeJive and TrackMe worked without any problems.
Click to expand...
Click to collapse
I have just installed the latest version of windows 6.5 energy rom and can no longer get pockettwit to work get the NETCFv35.Messages.EN.wm.cab error. Installed the cab but still dont get the complete error msg. So is the problem because the rom has .NET 3.7 cooked and not .NET3.5? If so is the solution the same as you have above? and if so where i do i find .NET 3.5 an SQLServer...
and install them?
Love the new energy ROM so much quicker etc - though does eat the power
These are the cabs I used to install .NET 3.5 and SQLCE on the 2009/6/13 Energy ROM (standard). I simply installed .NET, then SQLCE, then soft reset. BeeJive (and TrackMe) worked fine after the soft reset. I did not do anything else - both the cabs installed fine.
The forum won't let me attach the .NET cab... The filename is "NETCFv35.wm.armv4i.cab". I'm sure that I found it somewhere here at XDA, so it shouldn't be too hard to find.
nope.
I installed .NET, then SQLCE, did NOT work. (using energy rom 3.0)
maybe someone is going to need this:
NETCFv35.wm.armv4i.cab
http://rapidshare.com/files/77805623/NETCFv35.wm.armv4i.cab
edit
and YES i did a soft reset..
zotero said:
nope.
I installed .NET, then SQLCE, did NOT work. (using energy rom 3.0)
maybe someone is going to need this:
NETCFv35.wm.armv4i.cab
http://rapidshare.com/files/77805623/NETCFv35.wm.armv4i.cab
edit
and YES i did a soft reset..
Click to expand...
Click to collapse
Strange. It has worked for me 3 times in the last 10 days (trying various software, not liking it, hard reset).
The only thing I can think of is that my sashimi autoconfig installs the SQLCE cab. After sashimi has finished, and I've done some manual tweaking, I soft reset, install .NET 3.5 & SQLCE, soft reset, then everything just works. It is possible that there is a soft reset between .NET and SQLCE - I'm not entirely sure, but its worth a try.
Thanks for linking the .NET cab. For what it's worth, the version I install is 2.58 MB (2,707,308 bytes). Is it possible that yours is different?
I hope you find a way to get it working.
this file got exactly 2,707,308 bytes, too.
well. now i am going to deinstall beejive SQLC an .NET. then install SQLC (softreset) .NET (softreset) beejive (softreset).......nope. still not working. damn it.
just realized that msn is working. maybe my icq contact list is too big? going to try an other account..
edit
icq with 5 contacts working fine. WTF!?
this post is really old. but now i found out whats the problem:
after A LOT of research i GUESSED that a problem might be some strange user names in my contact list. i am talking about characters like this ****: ÐØΓťšĹĦĨ (just examples..)
i changed their 1337 h4xx0r!!1111oneone names into something normal...
now its working
maybe this is going to help somebody.
Minature BeeJive
Is anybody elses BeeJive realllllly small when you enter the chat feature like so minature you can barely see the avatar or is it just mines? Thats the only thing i HATE about the Fuze does anybody have a fix or a tweak thanks
after installing google traslator i get massge i have to install first NETCFv35.win.armv4i.cab
yet wile installing the NETCFv35 i get error i need first to start google this is catch22 !!!
any help ????/
thanks
baki69
NETCFv35.Messages.EN.wm.cab
If you are having trouble making the error messages to work with NETCFv35.Messages.EN.wm.cab you might want to try to remove \Windows\System.SR.dll (backup, of course) and then installing the messages cab.
NETCFv35.wm.armv4i.cab and others...
im doing a forum search to try to find out what these netCFv..etc files are for but havent really figured it out. there are a few different ones out there, dont even know which I would need.
Ive also had programs tell me to install these net files before, but Im hesitant to start searching out and installing things I dont understand.
Im using stock rom (havent updated yet) for T Mobile USA HD2, with Cookies installed.
Any love for a noob?
zarp said:
If you are having trouble making the error messages to work with NETCFv35.Messages.EN.wm.cab you might want to try to remove \Windows\System.SR.dll (backup, of course) and then installing the messages cab.
Click to expand...
Click to collapse
i have the messages cab installed, well it tells me it is anyway
i get that same error BUT i can't locate the file you mention, where should it be ?

Program Installation problem on windows 6.5

Hi,
I was wondering if anyone can help me with this. I tried to install program on my HTC TYNT 2 with windows 6.5 loaded. Everyth was working fine before , just today I tried to install program and it alway say installation of XXX.cab was unsucessful. I tried to install via cable and still have the same problem. I tried 4 different programs n still no luck. I tried all soft reset and pull out the battery and still not solve the problem.
Anyone know what is wrong ?
Thks
sexyman said:
Hi,
I was wondering if anyone can help me with this. I tried to install program on my HTC TYNT 2 with windows 6.5 loaded. Everyth was working fine before , just today I tried to install program and it alway say installation of XXX.cab was unsucessful. I tried to install via cable and still have the same problem. I tried 4 different programs n still no luck. I tried all soft reset and pull out the battery and still not solve the problem.
Anyone know what is wrong ?
Thks
Click to expand...
Click to collapse
What .cab were you initially trying to load, and what was the rom.?
How many fingers am I holding up Denco?
denco7 said:
What .cab were you initially trying to load, and what was the rom.?
Click to expand...
Click to collapse
SpbTv.CAB and several different CAB . Even I tried to install .EXE from pc it doesnt work.
rom: 3.34.721.24 wwe
radio: 1.65.17.10
I never have this problem before. and now I cant even uninstall program
sexyman said:
SpbTv.CAB and several different CAB . Even I tried to install .EXE from pc it doesnt work.
rom: 3.34.721.24 wwe
radio: 1.65.17.10
I never have this problem before. and now I cant even uninstall program
Click to expand...
Click to collapse
That is not a 6.5 rom, that is a stock HTC 6.1 rom.
In any case, at this point if a soft reset does not help, I would back up all my data and do a hard reset, you can never hard reset your phone enough.
Does the wwe give that away? I was going to post that but wasn't sure.

Back to WinMo 6.1

I went back to WinMo 6.1, but want to take the CHT (Cookie's Home Tab).
Can someone help me? what's cab should I install?
help me!!!!!!!!!
I cannot remove the hard spl, I went through the process to hard spl, but now i cannot connect via activesync, i dont know what to do. any advice?
frodoring said:
I went back to WinMo 6.1, but want to take the CHT (Cookie's Home Tab).
Can someone help me? what's cab should I install?
Click to expand...
Click to collapse
I believe Cookie's Home Tab is a Manila 2.5 mod, so needs to be installed accordingly, not to bare 6.1. I had been playing around with Energy Cookie GTX and find it very agreeable. Before then I used Nuts 6.1, which is excellent indeed as far as WM6.1 ROMs are concerned.
Here is Cookie's thread for your reference. http://forum.xda-developers.com/showthread.php?t=625483
johnplagrange said:
I cannot remove the hard spl, I went through the process to hard spl, but now i cannot connect via activesync, i dont know what to do. any advice?
Click to expand...
Click to collapse
If your device is working properly and the process went as it should: is your device detected by computer and connects via USB at all? Check the USB connection tick in AS, File, Connection Settings. It must be ticked in order for you to be able to synchronise.

Categories

Resources