Program Installation problem on windows 6.5 - Tilt, TyTN II, MDA Vario III General

Hi,
I was wondering if anyone can help me with this. I tried to install program on my HTC TYNT 2 with windows 6.5 loaded. Everyth was working fine before , just today I tried to install program and it alway say installation of XXX.cab was unsucessful. I tried to install via cable and still have the same problem. I tried 4 different programs n still no luck. I tried all soft reset and pull out the battery and still not solve the problem.
Anyone know what is wrong ?
Thks

sexyman said:
Hi,
I was wondering if anyone can help me with this. I tried to install program on my HTC TYNT 2 with windows 6.5 loaded. Everyth was working fine before , just today I tried to install program and it alway say installation of XXX.cab was unsucessful. I tried to install via cable and still have the same problem. I tried 4 different programs n still no luck. I tried all soft reset and pull out the battery and still not solve the problem.
Anyone know what is wrong ?
Thks
Click to expand...
Click to collapse
What .cab were you initially trying to load, and what was the rom.?

How many fingers am I holding up Denco?

denco7 said:
What .cab were you initially trying to load, and what was the rom.?
Click to expand...
Click to collapse
SpbTv.CAB and several different CAB . Even I tried to install .EXE from pc it doesnt work.
rom: 3.34.721.24 wwe
radio: 1.65.17.10
I never have this problem before. and now I cant even uninstall program

sexyman said:
SpbTv.CAB and several different CAB . Even I tried to install .EXE from pc it doesnt work.
rom: 3.34.721.24 wwe
radio: 1.65.17.10
I never have this problem before. and now I cant even uninstall program
Click to expand...
Click to collapse
That is not a 6.5 rom, that is a stock HTC 6.1 rom.
In any case, at this point if a soft reset does not help, I would back up all my data and do a hard reset, you can never hard reset your phone enough.

Does the wwe give that away? I was going to post that but wasn't sure.

Related

Cant install Advanced Config on Dutty v2. HELP

Whenever I try to install advancedconfig it states "Installation of AdvancedConfig_v1.1.CAB was unseccessful. Does anyone know why this is happening or a solution"
it worked fine for me. are you using the latest version of advanced config?
bryangauvin said:
Whenever I try to install advancedconfig it states "Installation of AdvancedConfig_v1.1.CAB was unseccessful. Does anyone know why this is happening or a solution"
Click to expand...
Click to collapse
Try to download the cab again (from duttys cabs) and install it to the device not the storage card, hope that helps. I have 1.1 installed on mine and it installed fine.
doesnt work
Tried redownloading and the same thing. The message pops up before it gives you the chance to pick were to store it.
Im also having the same issue on Arcsoft MMS Composer v4.0.31.28.
Both were downloaded from Dutty's FTP server
bryangauvin said:
Tried redownloading and the same thing. The message pops up before it gives you the chance to pick were to store it.
Im also having the same issue on Arcsoft MMS Composer v4.0.31.28.
Both were downloaded from Dutty's FTP server
Click to expand...
Click to collapse
I know this may sound stupid but have you soft reseted the phone yet and then tried to install it from a fresh boot.
alltheway said:
I know this may sound stupid but have you soft reseted the phone yet and then tried to install it from a fresh boot.
Click to expand...
Click to collapse
funny, i just assumed that was what they were doing. You know what happens when we assume?
P1Tater said:
funny, i just assumed that was what they were doing. You know what happens when we assume?
Click to expand...
Click to collapse
As someone once told me...never underestimate the power of stupidity.
yes I tried the soft reset. I soft reset at least once a day.
any ideas out there???
bryangauvin said:
any ideas out there???
Click to expand...
Click to collapse
It should just install but try this, soft reset before you try attempting to install the cab.
Install sdckerts.cab in my cab collections
Soft reset
Install advance config
or try installing both versions of advance config to see if one installs
Hey Dutty,
First off thanks for your hard work on these roms. I tried installing sdckerts.cab and get the same message. Any other suggestions. Im now using your v3 test rom.
My Phone is Similar
It installs it, but doesnt save anything i do, just says "unable to apply changes" i have a focus flash btw

Xbmode cause manilla.exe to crash. urgent!

Im so sorry, im not the kind of person that makes treads and post them as urgent. But this is truly urgent.
I have .net 3.5 cf installed on my phone, i then installed xbmod policy.cab and restarted. Disabled tf3d, installed XBmod VGA Rhodium Manila.cab, rebooted and installed HTC New Contact Card.cab. Once again i reboted, installed Start menu fix.cab and the reboted again. Then i enabled tf3d.
But it all crashes everytime! Manilla.exe crashes and gives a report
'Microsoft.VisualBasic recources not found.
Please im going away and i really need the phone to be working.
I also have sdkcerts installed and i have pressed the reset button with the stylus a couple of times
I would just reflash the ROM or try another ROM altogether that already has Manila 2 already on board. There are 2 in existence. One I am currently using and it works great.
First of all some background please.
Do u have Hard SPL already installed?
band27 said:
I would just reflash the ROM or try another ROM altogether that already has Manila 2 already on board. There are 2 in existence. One I am currently using and it works great.
First of all some background please.
Do u have Hard SPL already installed?
Click to expand...
Click to collapse
No, I have the 2..03.413.2 SVE room, the original from HTC.
Im to afraid to try cooked rooms.
pking said:
No, I have the 2..03.413.2 SVE room, the original from HTC.
Im to afraid to try cooked rooms.
Click to expand...
Click to collapse
then try again to install xboxmods rhodium manilla... well remember to go to settings>today and disable touchflo 3d before you install... then try installing it all again....
Arju007 said:
then try again to install xboxmods rhodium manilla... well remember to go to settings>today and disable touchflo 3d before you install... then try installing it all again....
Click to expand...
Click to collapse
Thats the fun part. Ive done that two times now :/
pking said:
Thats the fun part. Ive done that two times now :/
Click to expand...
Click to collapse
Many members went through this already. Learn from their mistakes ......PRESS HERE
If you have an original ROM then it may be that you don't have NET 3.5 Framework, yes?
yeah that must be it... lol ... hope that's his answer.. i remember my stock rom didn't have that but all the custom i've used has it cooked in..
Just go "Cooked" and you will never go back...lol
We can set up a day where I will help u through if you wish...
You know what. I will hard reset it.
Install xbmod policy.cab
Disable the plugin
Install XBmod VGA Rhodium Manila.cab
Soft reset
HTC New Contact Card.cab
Soft reset
enable tf3d today plugins
Is it all correct?
No i have .net 3.5 cf as i wrote in my first post.
Hey thanks man! but i have only had bad experience from cooked roms. And since my phone has gone in to service to get repaired 2 times i dont wat to risk getting a huge bill, you know they will make up that the rom was the one that destroyed the phone.
pking said:
You know what. I will hard reset it.
Install xbmod policy.cab
Disable the plugin
Install XBmod VGA Rhodium Manila.cab
Soft reset
HTC New Contact Card.cab
Soft reset
tf3d today plugins
Is it all correct?
Click to expand...
Click to collapse
No matter how many times you do this, it won't work without Netframework 3.5.
band27 said:
No matter how many times you do this, it won't work without Netframework 3.5.
Click to expand...
Click to collapse
I had installed this:
http://www.microsoft.com/downloads/...49-3C6B-42F1-9FD9-0041345B3385&displaylang=en
Does me having a swedish rom affect anything?
pking said:
I had installed this:
http://www.microsoft.com/downloads/...49-3C6B-42F1-9FD9-0041345B3385&displaylang=en
Does me having a swedish rom affect anything?
Click to expand...
Click to collapse
Regardless of what language your ROM is, will not impact your devices ability to install manila 2
pking said:
You know what. I will hard reset it.
Install xbmod policy.cab
Disable the plugin
Install XBmod VGA Rhodium Manila.cab
Soft reset
HTC New Contact Card.cab
Soft reset
enable tf3d today plugins
Is it all correct?
No i have .net 3.5 cf as i wrote in my first post.
Hey thanks man! but i have only had bad experience from cooked roms. And since my phone has gone in to service to get repaired 2 times i dont wat to risk getting a huge bill, you know they will make up that the rom was the one that destroyed the phone.
Click to expand...
Click to collapse
No, don´t softreset after installing VGA rhodium manila.cab - just hit continue or cancel (I don´t remember..) and proceed with the HTC new contact Card.cab. and then softreset.
This is from the installation instructions in post #3
Hope this helps..
jonorb said:
No, don´t softreset after installing VGA rhodium manila.cab - just hit continue or cancel (I don´t remember..) and proceed with the HTC new contact Card.cab. and then softreset.
This is from the installation instructions in post #3
Hope this helps..
Click to expand...
Click to collapse
No freaking difference. This has driven me mad.

Registry not saving

Hello all,
I've been encountering this problem for ages and still haven't find a solution to it yet. Basically, I regedit so that the phone doesn't show contacts from SIM. After i soft-reset, the registry also resets and it still shows the SIM contacts. I've tried it through PHM RegEdit and Advanced Config 3.3 but no luck. Can anyone help me please
simonwong1989 said:
Hello all,
I've been encountering this problem for ages and still haven't find a solution to it yet. Basically, I regedit so that the phone doesn't show contacts from SIM. After i soft-reset, the registry also resets and it still shows the SIM contacts. I've tried it through PHM RegEdit and Advanced Config 3.3 but no luck. Can anyone help me please
Click to expand...
Click to collapse
Are you using a custom ROM or a stock ROM?
I'm using the uDK wm 6.5 21500 ROM
but this has occured with every ROM i've used so far, including Dutty V4 ROM
simonwong1989 said:
but this has occured with every ROM i've used so far, including Dutty V4 ROM
Click to expand...
Click to collapse
That's realled fd up! Have you tried cooking one of your own ROMs? Also, (this may sound bizarre) do you download the RUUs on the PC you flash it on? Do you flash with a VM? I used to download all of my SYS files on a Mac and it turned out when I copyed them to a Windows PC to cook and flash, ROMs came out screwy where no CAB files would install.
There are a ton of factors in this, but the best remedy is to try and download a stock ROM and download and flash that on device. That should clear up any corruption errors.
Just tired it no luck... =(. I use CustomRUU for my flashes. I have he unsigned HardSPL (can't remember which one) with the latest Blackstone radio and 2.04 ROM (uDK ROM) It has been happening since I first purchased it... its so frustrating. Only solution for me is to make a reg that loads at start up but i always need to press a dialog box to apply to regedit. Is there a way to auto reg on boot up of phone?
simonwong1989 said:
Just tired it no luck... =(. I use CustomRUU for my flashes. I have he unsigned HardSPL (can't remember which one) with the latest Blackstone radio and 2.04 ROM (uDK ROM) It has been happening since I first purchased it... its so frustrating. Only solution for me is to make a reg that loads at start up but i always need to press a dialog box to apply to regedit. Is there a way to auto reg on boot up of phone?
Click to expand...
Click to collapse
Did you try flashing from the SD?
Yep. tried it through the Bootloader and through CustomRUU. No lluck. Its quite frustrating beause it just keeps resetting. Other registries say though ie auto lock device in 5 seconds. That reg is perfect but its just the SIM wouldn't work.
simonwong1989 said:
Yep. tried it through the Bootloader and through CustomRUU. No lluck. Its quite frustrating beause it just keeps resetting. Other registries say though ie auto lock device in 5 seconds. That reg is perfect but its just the SIM wouldn't work.
Click to expand...
Click to collapse
Did you lock it again? You should uninstall HardSPL and put the SoftSPL back on. I do not know how to do this because I am on CDMA but stf will always be of help

Xperia Restarting problem with Custom Roms

So i have been using Custom ROMs for about a year now with no problems. However, recently i flash to the Valkyrie Firestorm 4.4 (i think) leo and when i attempted to restart my fone it would either hang on the sony erricson logo or it would boot up like it does after a flash. As in it would run the customisation and wipe all my contacts and other information, but strangely enough the clock would remain on the correct time.
This has happened with every firestorm i have tried, which are: 4.4 leo, 4.4 manila and the 4.5 leo. I am going to try a different ROM to see if i still get the problem. has anyone had this problem?
I've re-flashed my hard-spl multiple times to no avail.
Yup I've had the same problem with itje's touch it 14 rom. I have no idea why this is happening, it already occured twice with me.
I had the same problem with the valkyrie 4.4 rom, Itje's Toucht-it Leo v10 and Toucht-It Xperience v2, UnOff 6.5. And also with other versions of itje's Touch-it because i remember seeing the HTCpedia.com customization screen a lot
Every time my phone hung and then when i push the reset button it take's a long time and then it is back to first run. or it does nothing and stays at the touch-it start-up screen.
Could it be a hardware failure like something with the backup batery in the phone? when power goes off it doesn't save data and then when you turn it on it thinks it is first run?
I can always tell when it is going to happen if the favourite programs on the programs tab dont work anymore. When I want to start a program from the tab it says "location not found" or something. After that I will likely have a system freeze and after that I have a hard reset, same sympoms as Aerox912.
So maybe it has something to do with the programs tab?
I am having the same issue with Christians 3.201 build.
Also during the installation it will often hang on the install of Opera or Opera Beta.
But I tried re-downloading and reflashing 6 times before I gave up and went back to an older ROM.
Looking forward to the next version so I can try again. I really like the Firestorm but I also really like the Panels.
Now I just need to find out how to install the SPB Mobile Shell 3 as a panel like on Christians and I would probably stay with my SEX1 build.
Using itje's touch it 15 RC2 and it sometimes, for no reason, phone just reboots. It used to happen with version 14 as well. Never used to have that problem before then.
I tried with rotastrains Blaze rom. the latest edition and i am still getting the same issues. I too, can tell when it is going to happen. When the programs can't be run anymore or if the phone freezes and then i need to turn it off, i can almost guarantee that will happen.
Im glad to see im not the only one with the problem, but isn't there anyone with a solution? I've tried everything and i really cant put up with having to wait 15 minutes until my phone is usable everytime it restarts.
Guys, i had this problem with my Diamond recently & i can say that it's more than frustrating.
try this option, I'm not sure if this is the EXACT same process for the Xperia but it did solve my issues. Perhaps scheduling a daily backup of PPCPIMBackup will help keep info up 2 date when the dreaded lockup happens?
hope this helps
flash a stockrom and then the custom rom and the problem should be gone
Why would that help?
I now tried cristians rom, and had the same problem again within one day. I'm now gonna try the MTTY (format) option, see if that helps...
mobilkungen78 said:
flash a stockrom and then the custom rom and the problem should be gone
Click to expand...
Click to collapse
This simple solution seems to work fine for me. Thanks man!
The MTTY solution for formatting the phones ROM area worked just fine for me
Can you point me the mtty formatting method? Please.
I also had this problem once at my x1 and once at my girlfriends diamond. Seems a reflash with a stockrom and after that flash the custom rom again solves this problem.
Atleast it worked for me.
I put on the R3AA014 ROM and am still seeing the problems.
Is there another Stock ROM that would work better?
And I have tried to look up the mtty method and all I find are people talking about it, but not the actual method.
Any help would be appreciated.
Drokare said:
I put on the R3AA014 ROM and am still seeing the problems.
Is there another Stock ROM that would work better?
And I have tried to look up the mtty method and all I find are people talking about it, but not the actual method.
Any help would be appreciated.
Click to expand...
Click to collapse
Maybe it isn't a software problem but a hardware problem. Incase no rom fix it.
toontoonizer said:
The MTTY solution for formatting the phones ROM area worked just fine for me
Click to expand...
Click to collapse
Could you please describe the process.
I tried the The DEFINITIVE MTTY Thread but the task 29 command did nothing... Though i'm not sure what should happen.
For the Xperia, I heard that the command is Task 28 instead of Task 29 for the MTTY process
someguyyy said:
For the Xperia, I heard that the command is Task 28 instead of Task 29 for the MTTY process
Click to expand...
Click to collapse
Hm... i tried that but that did nothing.
happened to me many times..most frequent is my X1 will restart itself every half an hr...very frustrating
SOLUTION:
Format Your SD card (don't be lazy and just delete the old stuff and put new rom file in there).....put a fresh copy of the .nbh file in root.
Hard reset after flash.
Problem should be gone

[Q] Flashing TD2 (Topaz) stays at 0% help please!!!

Hi all
I really need some help please!!
I think I have read and searched and tried steps by step all the posts and threads on this, none of them work for me,
Ive flashed my HD2 & TD2 with HSPL, radios and roms many times in the past. I have a stock rom on my TD2, (havent flashed a cooked one yet but did on my HD2 and worked great),
the problem is when I try flash anything, (HSPL,Radio's and Roms)
I connect with WMDC on windows ultimate 64x and go through all the steps, the phone disconnects from WMDC when loading the tri-color screen, and installs the HTC sync drivers fine, and then (my problem) it hangs on 0%. this happens regardless of what I'm flashing after a while brings up the communication errors 208 & 260. this doesnt have any effect on the software HSPL or radio as a soft reset returns back to the homescreen just fine. I am running HSPL 1.8.3. , radio 4.49.25.17 and a shiped stock wm 6.5.
This is what Ive tried so far:
I have used 3 different micro USB cables,
updated my .net fx to 4.1
I have tried different Ruu's such as custom Ruu, Ruu from topaz, Ruu, supplied with Hspl, flashes center and KaiserCustomRUU.exe and a few others.
Ive tried the white screen fix many times. including the SDA unlocker and stuff.
I ve tried manual and automatic.
tried entering the the Tri-color screen manually and via the Ruu.
I tried different computers and different operating systems (W7ultimate and XP 32Bit and 64Bit)
tried active sync WMDC 6.0 and 6.1
Ive removed the SD card and sim and have tried flight mode
Restarted pc's mobile any reinstalled WMDC many times.
Ive tried renaming to the HSPL, radio and Rom to TOPAIMG.nbh , put 1 by 1 on formated fat32 SD card, run from Tri-color menu. all of them just hang on
loading....
Have tried mixing and matching Ruu's with HSPL's, Roms And radios and everything else i can think of, after 18 hours of this I am fed up and decided i need some help
Thanx in advance
can some1 please help on this?
ok
i have now download the official RUU_Topaz_S2_HTC_WWE-AFK_2.53.421.3_Radio_Signed_Topaz_61.44etc.25.35_4.49.25.91_Ship.exe Rom
and it worked with no problems.
it updated my HSPL from 1.83 to 2.51 and radio version to 4.49.25.91 which was exactly what i was going for.
The problem now is that i still cant change my HSPL, RADIO or flash a custom Rom which is what I need. it hangs on 0% and now gives me a 262 error which states that:
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process. If this happens, you can just soft reset the device and run RUU again. The update process will then continue. At this stage the rom on the device is incomplete and it will not boot back up into Windows. You will need to place it into the bootloader to continue.
which is not true as if a reboot it doesn't continue the update and just returns to the home screen as normal
help?
Now as your device is updated (officially)... so now can you try installing HSPL from here: http://forum.xda-developers.com/showthread.php?t=520312
Thanks.
prabhat said:
Now as your device is updated (officially)... so now can you try installing HSPL from here: http://forum.xda-developers.com/showthread.php?t=520312
Thanks.
Click to expand...
Click to collapse
Yes thanx i have. it was the first think i tried after i flashed the official HSPL, still doesnt work
IcedXian said:
Yes thanx i have. it was the first think i tried after i flashed the official HSPL, still doesnt work
Click to expand...
Click to collapse
Does your device is CID/SIM Locked? If yes you may have to try this first:
Diamond 2 CID/Security/SIM Unlocker. And then HSPL.
prabhat said:
Does your device is CID/SIM Locked? If yes you may have to try this first:
Diamond 2 CID/Security/SIM Unlocker. And then HSPL.
Click to expand...
Click to collapse
how do i check if it is locked?
IcedXian said:
how do i check if it is locked?
Click to expand...
Click to collapse
Try other network SIM and see if that is working?
prabhat said:
Try other network SIM and see if that is working?
Click to expand...
Click to collapse
Than x alot for your help dude!
just got it right now, didnt have internet so i coudnt make use of the automatic flash with Topaz-HardSPL_V5_09R6.
this error occured when using the manual. i got internet now and used the automatic flash and it worked like a charm.
thanx again will be in contact if i have any other problems
so how do i marked this thread as solved????
OK Good Cheers!!!
Now enjoy any ROM you want and have fun .
You can append the post title with "[SOLVED]".
Thanks.
IcedXian said:
Than x alot for your help dude!
just got it right now, didnt have internet so i coudnt make use of the automatic flash with Topaz-HardSPL_V5_09R6.
this error occured when using the manual. i got internet now and used the automatic flash and it worked like a charm.
thanx again will be in contact if i have any other problems
Click to expand...
Click to collapse
Brother explain more, how you solved your problem... I am also facing problem my room update also stuck at 0%..... what do you mean by "get internet"? and why you need it? and on which you get it mobile or pc?.......

Categories

Resources