Registry not saving - Touch Diamond, MDA Compact IV General

Hello all,
I've been encountering this problem for ages and still haven't find a solution to it yet. Basically, I regedit so that the phone doesn't show contacts from SIM. After i soft-reset, the registry also resets and it still shows the SIM contacts. I've tried it through PHM RegEdit and Advanced Config 3.3 but no luck. Can anyone help me please

simonwong1989 said:
Hello all,
I've been encountering this problem for ages and still haven't find a solution to it yet. Basically, I regedit so that the phone doesn't show contacts from SIM. After i soft-reset, the registry also resets and it still shows the SIM contacts. I've tried it through PHM RegEdit and Advanced Config 3.3 but no luck. Can anyone help me please
Click to expand...
Click to collapse
Are you using a custom ROM or a stock ROM?

I'm using the uDK wm 6.5 21500 ROM

but this has occured with every ROM i've used so far, including Dutty V4 ROM

simonwong1989 said:
but this has occured with every ROM i've used so far, including Dutty V4 ROM
Click to expand...
Click to collapse
That's realled fd up! Have you tried cooking one of your own ROMs? Also, (this may sound bizarre) do you download the RUUs on the PC you flash it on? Do you flash with a VM? I used to download all of my SYS files on a Mac and it turned out when I copyed them to a Windows PC to cook and flash, ROMs came out screwy where no CAB files would install.
There are a ton of factors in this, but the best remedy is to try and download a stock ROM and download and flash that on device. That should clear up any corruption errors.

Just tired it no luck... =(. I use CustomRUU for my flashes. I have he unsigned HardSPL (can't remember which one) with the latest Blackstone radio and 2.04 ROM (uDK ROM) It has been happening since I first purchased it... its so frustrating. Only solution for me is to make a reg that loads at start up but i always need to press a dialog box to apply to regedit. Is there a way to auto reg on boot up of phone?

simonwong1989 said:
Just tired it no luck... =(. I use CustomRUU for my flashes. I have he unsigned HardSPL (can't remember which one) with the latest Blackstone radio and 2.04 ROM (uDK ROM) It has been happening since I first purchased it... its so frustrating. Only solution for me is to make a reg that loads at start up but i always need to press a dialog box to apply to regedit. Is there a way to auto reg on boot up of phone?
Click to expand...
Click to collapse
Did you try flashing from the SD?

Yep. tried it through the Bootloader and through CustomRUU. No lluck. Its quite frustrating beause it just keeps resetting. Other registries say though ie auto lock device in 5 seconds. That reg is perfect but its just the SIM wouldn't work.

simonwong1989 said:
Yep. tried it through the Bootloader and through CustomRUU. No lluck. Its quite frustrating beause it just keeps resetting. Other registries say though ie auto lock device in 5 seconds. That reg is perfect but its just the SIM wouldn't work.
Click to expand...
Click to collapse
Did you lock it again? You should uninstall HardSPL and put the SoftSPL back on. I do not know how to do this because I am on CDMA but stf will always be of help

Related

Why My Screen freezing? Please Help...

Hi all,
I really got angry and I will break my phone...
I tried many Rom's but my screen sometimes freezing(but too much times)? Also softkeys freezing too...
What is the problem?
Please help me...
And any offer for me please, I need a rom very lite. (No manilla or something, just I want Htc Home and stable)???
Thanks...
ccmaniac said:
Hi all,
I really got angry and I will break my phone...
I tried many Rom's but my screen sometimes freezing(but too much times)? Also softkeys freezing too...
What is the problem?
Please help me...
And any offer for me please, I need a rom very lite. (No manilla or something, just I want Htc Home and stable)???
Thanks...
Click to expand...
Click to collapse
You probably have the wrong SPL installed. If you flashed a ROM using Olipof's HardSPL v1 and are using a WM6.1 ROM, you need to upgrade your SPL.
Flash cmonex's latest 3.* Hard SPL's from here: http://forum.xda-developers.com/showthread.php?t=420683
Thanks
Dave
I have installed 3.29
(I have download Kaiser-HardSPL-3.29-force-USB than install with KaiserCustomRUU.exe, isn't it?)
ccmaniac said:
I have installed 3.29
(I have download Kaiser-HardSPL-3.29-force-USB than install with KaiserCustomRUU.exe, isn't it?)
Click to expand...
Click to collapse
Instructions in Post #2 here: http://forum.xda-developers.com/showthread.php?t=396922
There are two sets BTW.
Ta
Dave
Which version do you offer me for WM6.1?
I saw something in cmonex " 3.29 is still very strongly recommended over 3.56, unless you have OS freezing issues with 3.29. "
ccmaniac said:
Which version do you offer me for WM6.1?
I saw something in cmonex " 3.29 is still very strongly recommended over 3.56, unless you have OS freezing issues with 3.29. "
Click to expand...
Click to collapse
If you are using a ROM based on a HTC Rom (which most cooked ones are) then 3.29. For ATT based ROMs then 3.56.
If you don't know, use 3.29, and if your not happy try 3.56
Dave
I think my instalitation is not true, right?
Just get the zip file then run KaiserCustomRUU.exe???
ccmaniac said:
I think my instalitation is not true, right?
Just get the zip file then run KaiserCustomRUU.exe???
Click to expand...
Click to collapse
Read the instructions I posted. I am not copying them out
Dave
3. insert the microSD in the kaiser, then reset kaiser. (I did soft reset???) But not start 4
4. it should say Loading / Update in progress then reboot to a screen saying SPL 1.00.OliNex.
5. it should now flash in the KAISIMG.NBH. and will reset.
6. at this point it should boot to the OS, if it doesn't, then flash an OS. (of course delete the previous KAISDIAG.NBH and KAISIMG.NBH from the sd card and remove sd unless you opt to flash the OS from sd too)
I did't do that with http://forum.xda-developers.com/showthread.php?t=420683
But I think I have made it with http://forum.xda-developers.com/showthread.php?t=396922.
Now I will flash Radio and Rom...
Thanks...
Using Dutty's Rom WM6.1 Hybrid v2 5.2.19716/5.2.19700 and works GREAT...
got the same problem, some one say i got a lot of progam runing and the os cant go well, i think i fix it setting X button to really close apps and dont go background
Hi folks!
I had the same problem: change my at&t tilt rom/radio/spl to htc.
result: touch screen does not working!
The only way that i found is undo changes:
1º - installing and using: Remote screen Alignment to skip the first screen calibration. Just power on Tilt and wait until activesync are connected, so, run "remote screen alignment" and click skip, if the phone does not restart, do a soft reset.
2º - In the next power on, use activesync to copy JumpSPL1.56-KAIS.exe to your phone.
3º - use the buttons to navigate and execute JumpSPL1.56-KAIS.exe on the phone. (to execute JumpSPL1.56-KAIS.exe file use the ENTER key of the sliding keyboard).
4º- now just replace RUU_Kaiser_CINGULAR_WWE_.exe (OEM ROM i think)/ bootloader spl1.93.0/1.56 (maybe the screen problem occurs due the wrong spl/rom combination or newer spl like 3.28/3.29 ).
After these steps my AT&T Tilt touch screen is back to work!
Now i'm ready to try others roms again !!
PS: Sorry for poor english, if anybody don't understand anything just ask!

Program Installation problem on windows 6.5

Hi,
I was wondering if anyone can help me with this. I tried to install program on my HTC TYNT 2 with windows 6.5 loaded. Everyth was working fine before , just today I tried to install program and it alway say installation of XXX.cab was unsucessful. I tried to install via cable and still have the same problem. I tried 4 different programs n still no luck. I tried all soft reset and pull out the battery and still not solve the problem.
Anyone know what is wrong ?
Thks
sexyman said:
Hi,
I was wondering if anyone can help me with this. I tried to install program on my HTC TYNT 2 with windows 6.5 loaded. Everyth was working fine before , just today I tried to install program and it alway say installation of XXX.cab was unsucessful. I tried to install via cable and still have the same problem. I tried 4 different programs n still no luck. I tried all soft reset and pull out the battery and still not solve the problem.
Anyone know what is wrong ?
Thks
Click to expand...
Click to collapse
What .cab were you initially trying to load, and what was the rom.?
How many fingers am I holding up Denco?
denco7 said:
What .cab were you initially trying to load, and what was the rom.?
Click to expand...
Click to collapse
SpbTv.CAB and several different CAB . Even I tried to install .EXE from pc it doesnt work.
rom: 3.34.721.24 wwe
radio: 1.65.17.10
I never have this problem before. and now I cant even uninstall program
sexyman said:
SpbTv.CAB and several different CAB . Even I tried to install .EXE from pc it doesnt work.
rom: 3.34.721.24 wwe
radio: 1.65.17.10
I never have this problem before. and now I cant even uninstall program
Click to expand...
Click to collapse
That is not a 6.5 rom, that is a stock HTC 6.1 rom.
In any case, at this point if a soft reset does not help, I would back up all my data and do a hard reset, you can never hard reset your phone enough.
Does the wwe give that away? I was going to post that but wasn't sure.

Xperia Restarting problem with Custom Roms

So i have been using Custom ROMs for about a year now with no problems. However, recently i flash to the Valkyrie Firestorm 4.4 (i think) leo and when i attempted to restart my fone it would either hang on the sony erricson logo or it would boot up like it does after a flash. As in it would run the customisation and wipe all my contacts and other information, but strangely enough the clock would remain on the correct time.
This has happened with every firestorm i have tried, which are: 4.4 leo, 4.4 manila and the 4.5 leo. I am going to try a different ROM to see if i still get the problem. has anyone had this problem?
I've re-flashed my hard-spl multiple times to no avail.
Yup I've had the same problem with itje's touch it 14 rom. I have no idea why this is happening, it already occured twice with me.
I had the same problem with the valkyrie 4.4 rom, Itje's Toucht-it Leo v10 and Toucht-It Xperience v2, UnOff 6.5. And also with other versions of itje's Touch-it because i remember seeing the HTCpedia.com customization screen a lot
Every time my phone hung and then when i push the reset button it take's a long time and then it is back to first run. or it does nothing and stays at the touch-it start-up screen.
Could it be a hardware failure like something with the backup batery in the phone? when power goes off it doesn't save data and then when you turn it on it thinks it is first run?
I can always tell when it is going to happen if the favourite programs on the programs tab dont work anymore. When I want to start a program from the tab it says "location not found" or something. After that I will likely have a system freeze and after that I have a hard reset, same sympoms as Aerox912.
So maybe it has something to do with the programs tab?
I am having the same issue with Christians 3.201 build.
Also during the installation it will often hang on the install of Opera or Opera Beta.
But I tried re-downloading and reflashing 6 times before I gave up and went back to an older ROM.
Looking forward to the next version so I can try again. I really like the Firestorm but I also really like the Panels.
Now I just need to find out how to install the SPB Mobile Shell 3 as a panel like on Christians and I would probably stay with my SEX1 build.
Using itje's touch it 15 RC2 and it sometimes, for no reason, phone just reboots. It used to happen with version 14 as well. Never used to have that problem before then.
I tried with rotastrains Blaze rom. the latest edition and i am still getting the same issues. I too, can tell when it is going to happen. When the programs can't be run anymore or if the phone freezes and then i need to turn it off, i can almost guarantee that will happen.
Im glad to see im not the only one with the problem, but isn't there anyone with a solution? I've tried everything and i really cant put up with having to wait 15 minutes until my phone is usable everytime it restarts.
Guys, i had this problem with my Diamond recently & i can say that it's more than frustrating.
try this option, I'm not sure if this is the EXACT same process for the Xperia but it did solve my issues. Perhaps scheduling a daily backup of PPCPIMBackup will help keep info up 2 date when the dreaded lockup happens?
hope this helps
flash a stockrom and then the custom rom and the problem should be gone
Why would that help?
I now tried cristians rom, and had the same problem again within one day. I'm now gonna try the MTTY (format) option, see if that helps...
mobilkungen78 said:
flash a stockrom and then the custom rom and the problem should be gone
Click to expand...
Click to collapse
This simple solution seems to work fine for me. Thanks man!
The MTTY solution for formatting the phones ROM area worked just fine for me
Can you point me the mtty formatting method? Please.
I also had this problem once at my x1 and once at my girlfriends diamond. Seems a reflash with a stockrom and after that flash the custom rom again solves this problem.
Atleast it worked for me.
I put on the R3AA014 ROM and am still seeing the problems.
Is there another Stock ROM that would work better?
And I have tried to look up the mtty method and all I find are people talking about it, but not the actual method.
Any help would be appreciated.
Drokare said:
I put on the R3AA014 ROM and am still seeing the problems.
Is there another Stock ROM that would work better?
And I have tried to look up the mtty method and all I find are people talking about it, but not the actual method.
Any help would be appreciated.
Click to expand...
Click to collapse
Maybe it isn't a software problem but a hardware problem. Incase no rom fix it.
toontoonizer said:
The MTTY solution for formatting the phones ROM area worked just fine for me
Click to expand...
Click to collapse
Could you please describe the process.
I tried the The DEFINITIVE MTTY Thread but the task 29 command did nothing... Though i'm not sure what should happen.
For the Xperia, I heard that the command is Task 28 instead of Task 29 for the MTTY process
someguyyy said:
For the Xperia, I heard that the command is Task 28 instead of Task 29 for the MTTY process
Click to expand...
Click to collapse
Hm... i tried that but that did nothing.
happened to me many times..most frequent is my X1 will restart itself every half an hr...very frustrating
SOLUTION:
Format Your SD card (don't be lazy and just delete the old stuff and put new rom file in there).....put a fresh copy of the .nbh file in root.
Hard reset after flash.
Problem should be gone

Help needed reverting back to WM6.1

Hi, if anyone could please help me i would be gratefull, i recently purchased a D2 but its already preloaded with WM6.5 rom version 2.53.405.5 (76952)WWE, But i really wanted WM6.1 as, among other things, i wanted to use the handwriting rec.
does anyone know what stock rom to reload? and where i can get it? sorry to ask such a basic question.
thanks in advance,
http://www.htc.com/europe/SupportDownload.aspx?p_id=249&cat=2&dl_id=613
thanks for that, however it seems to have just bricked the phone
thanks for that, however it seems to have just bricked the phone
it seemed to work, all the correct messages displayed
but......
now all that happens is it turns on, shows the touch diamond2 screen, then resets
it has the following text in red in the lower left hand corner
r 3 . 43. 25 .19
g 61. 20t. 25. 10U
d 1. 39. 47382
does any one have any ideas?
Try to hard reset.
tried that before i posted
and a soft reset, and another hard reset to be sure,
i searched the forum but couldn't find any reference to that type of error either.
any ideas on how to retrieve it from paperweight mode?
Download stock ROM for your region
Unpack it with WinRar or TotalCMD
Rename RUU_signed.nbh to topaimg.nbh
Copy topaimg.nbh on your SD card
Enter bootloader (hold volume down and turn on phone) and follow instructions
edit:I guess for wm 6.1 you need lower version of SSPL
thanks dude, i used the bootloader to reinstall the latest rom from HTC.
Topaz_S2_HTC_WWE_2.53.405.5_Radio_Signed_Topaz_61.44etc.25.35_4.49.25.91_Ship
my phone is no longer a brick however i am back to square 1 in that i still have wm6.5, and i want 6.1
ive tried to reflash with the older rom fighter7139 suggested
RUU_Topaz_HTC_WWE_1.39.405.3_Radio_Signed_Topaz_61.20t.25.10_3.43.25.19_Ship
but it gives me the same rebooting error.
any ideas why wont the older rom work on my phone? or if theres an alternative to that rom ?
thanks
I've loaded hardspl 1.83 and extracted the file RUU_signed.nbh and renamed it to topaimg.nbhand,
i moved it to the SD card, reflashed the phone with the 6.1 rom,
but i get the same error.
any idea on what rom i should use to update from?
or what stock spl i'd need to run this rom's version of 6.1 ?
a thought
maybe i don't even need 6.1, all i want to do is to fix two things -
1) make the sms messaging work like on the old htc devices ie diamond or tytn ie not use htc messaging
2) add handwriting recognition
- would also be nice to have the taskmanger icon, the battery icon and the original windows start menu back too, but im not dependent on them....
so i guess any rom would do that allows these functions, any help or info on this would be much appriciated
terminalkhaos said:
1) make the sms messaging work like on the old htc devices ie diamond or tytn ie not use htc messaging
Click to expand...
Click to collapse
Try http://forum.xda-developers.com/showpost.php?p=3771519&postcount=2991
2) add handwriting recognition
Click to expand...
Click to collapse
http://www.htc.com/www/SupportDownload.aspx?p_id=249&cat=0&dl_id=824
thanks for that, however that was the first thing i tried, i saw the download for the handwriting ap just after i got the phone, not knowing it didnt have it when i swapped from my diamond,
the thing is the update only works on certian AP version control builds -
the message on the site is -
Note: AP version control -> The criterion will pass if the Touch Input for Pocket is equal to Version 2.1 (Build1919.1320), or lower.
mines a higer version, which i assumed originally had to do with it being wm6.5 not 6.1,
- i have tried downloading and installing anyway but it wont load.
does anyone know how to get this update to load, or how to change the AP version control back to a lower version ?????
any help would be much appriciated.
if it matters,
i'm running Duttys HG, and ive flashed to hardspl,
i don't mind flashing back to whatever, i just really need the handwriting app
The handwriting SIP is likey hidden.
There is a reg edit to unhide, just search SIP Reg Edit and you should find it.
If I recall it was under the WM general tweaks.
thanks for that, i got the letter and block rec working, but still not the transcriber the reg key shows it should be showing, but i think the actual file may not be there,
fixed after changing the reg, and downloading the update, you then need this transcriber cab
http://forum.xda-developers.com/showpost.php?p=3661845&postcount=47732
result
Any luck finding a way to get 6.1 working on this phone? I just bought the Pure from AT&T as a replacement for my LG Incite that had 6.1 on it. So far I can't stand 6.5 at all. My main beef is with IE, I really like the one on my Incite vs. this one. And my other problem is with the start menu, I also prefer the drop-down style in 6.1.
Thanks for any replies or help.
TheNorthSideWhiteGuy said:
Any luck finding a way to get 6.1 working on this phone? I just bought the Pure from AT&T as a replacement for my LG Incite that had 6.1 on it. So far I can't stand 6.5 at all. My main beef is with IE, I really like the one on my Incite vs. this one. And my other problem is with the start menu, I also prefer the drop-down style in 6.1.
Thanks for any replies or help.
Click to expand...
Click to collapse
Start here.
Once you unlock your phone, you can flash to anything you want.
6.5 is hands down better than 6.1, there are 6.5.219xx builds that have the drop down start menu.
Thanks Bruce!
For some reason I couldn't find a good Pure forum, so that link helps a lot.

[Q] Flashing TD2 (Topaz) stays at 0% help please!!!

Hi all
I really need some help please!!
I think I have read and searched and tried steps by step all the posts and threads on this, none of them work for me,
Ive flashed my HD2 & TD2 with HSPL, radios and roms many times in the past. I have a stock rom on my TD2, (havent flashed a cooked one yet but did on my HD2 and worked great),
the problem is when I try flash anything, (HSPL,Radio's and Roms)
I connect with WMDC on windows ultimate 64x and go through all the steps, the phone disconnects from WMDC when loading the tri-color screen, and installs the HTC sync drivers fine, and then (my problem) it hangs on 0%. this happens regardless of what I'm flashing after a while brings up the communication errors 208 & 260. this doesnt have any effect on the software HSPL or radio as a soft reset returns back to the homescreen just fine. I am running HSPL 1.8.3. , radio 4.49.25.17 and a shiped stock wm 6.5.
This is what Ive tried so far:
I have used 3 different micro USB cables,
updated my .net fx to 4.1
I have tried different Ruu's such as custom Ruu, Ruu from topaz, Ruu, supplied with Hspl, flashes center and KaiserCustomRUU.exe and a few others.
Ive tried the white screen fix many times. including the SDA unlocker and stuff.
I ve tried manual and automatic.
tried entering the the Tri-color screen manually and via the Ruu.
I tried different computers and different operating systems (W7ultimate and XP 32Bit and 64Bit)
tried active sync WMDC 6.0 and 6.1
Ive removed the SD card and sim and have tried flight mode
Restarted pc's mobile any reinstalled WMDC many times.
Ive tried renaming to the HSPL, radio and Rom to TOPAIMG.nbh , put 1 by 1 on formated fat32 SD card, run from Tri-color menu. all of them just hang on
loading....
Have tried mixing and matching Ruu's with HSPL's, Roms And radios and everything else i can think of, after 18 hours of this I am fed up and decided i need some help
Thanx in advance
can some1 please help on this?
ok
i have now download the official RUU_Topaz_S2_HTC_WWE-AFK_2.53.421.3_Radio_Signed_Topaz_61.44etc.25.35_4.49.25.91_Ship.exe Rom
and it worked with no problems.
it updated my HSPL from 1.83 to 2.51 and radio version to 4.49.25.91 which was exactly what i was going for.
The problem now is that i still cant change my HSPL, RADIO or flash a custom Rom which is what I need. it hangs on 0% and now gives me a 262 error which states that:
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process. If this happens, you can just soft reset the device and run RUU again. The update process will then continue. At this stage the rom on the device is incomplete and it will not boot back up into Windows. You will need to place it into the bootloader to continue.
which is not true as if a reboot it doesn't continue the update and just returns to the home screen as normal
help?
Now as your device is updated (officially)... so now can you try installing HSPL from here: http://forum.xda-developers.com/showthread.php?t=520312
Thanks.
prabhat said:
Now as your device is updated (officially)... so now can you try installing HSPL from here: http://forum.xda-developers.com/showthread.php?t=520312
Thanks.
Click to expand...
Click to collapse
Yes thanx i have. it was the first think i tried after i flashed the official HSPL, still doesnt work
IcedXian said:
Yes thanx i have. it was the first think i tried after i flashed the official HSPL, still doesnt work
Click to expand...
Click to collapse
Does your device is CID/SIM Locked? If yes you may have to try this first:
Diamond 2 CID/Security/SIM Unlocker. And then HSPL.
prabhat said:
Does your device is CID/SIM Locked? If yes you may have to try this first:
Diamond 2 CID/Security/SIM Unlocker. And then HSPL.
Click to expand...
Click to collapse
how do i check if it is locked?
IcedXian said:
how do i check if it is locked?
Click to expand...
Click to collapse
Try other network SIM and see if that is working?
prabhat said:
Try other network SIM and see if that is working?
Click to expand...
Click to collapse
Than x alot for your help dude!
just got it right now, didnt have internet so i coudnt make use of the automatic flash with Topaz-HardSPL_V5_09R6.
this error occured when using the manual. i got internet now and used the automatic flash and it worked like a charm.
thanx again will be in contact if i have any other problems
so how do i marked this thread as solved????
OK Good Cheers!!!
Now enjoy any ROM you want and have fun .
You can append the post title with "[SOLVED]".
Thanks.
IcedXian said:
Than x alot for your help dude!
just got it right now, didnt have internet so i coudnt make use of the automatic flash with Topaz-HardSPL_V5_09R6.
this error occured when using the manual. i got internet now and used the automatic flash and it worked like a charm.
thanx again will be in contact if i have any other problems
Click to expand...
Click to collapse
Brother explain more, how you solved your problem... I am also facing problem my room update also stuck at 0%..... what do you mean by "get internet"? and why you need it? and on which you get it mobile or pc?.......

Categories

Resources