Related
Hello all
I'm curious because I maybe want to do this. Yeah im talking about HARD SPL.
Now...the big problem..
What the hell is it
1. What does it do?
2. What do i need to do it?
3. Does it matter what kind of WM6 Build I have??
4. What is IPL, SPL (how can i check it)
My specs:
HTC p4350 NL (herald)
WM6 5.2.1238 (Build 17745.02.3)
WLM V 10.6.0033.0600 (Running Very Stable with no sync problems at all )
I all ready did:
- Page tool 4MB
- Overclocked to 299Mhz (Running Stable) With Battery Status
What I want:
- Do the HARD SPL thing. Because I heard that it cleans up your WM6????
- I want the Touch-IT v4.0 for p4350
Can anyone help me with this??
Thanks in advance,
A.Sadikrama
Edit:
Nevermind everyone!!! I get it now
I second every single question you asked Anyone care to enlighten us?
kweng_ca said:
I second every single question you asked Anyone care to enlighten us?
Click to expand...
Click to collapse
Hihihi
I solved this one myself man And i allready did it all.
Here is a "i think" good one:
HardSPL = A Custom Windows Mobile Rom with some tweaks so that you can do stuff with your PPC
You really should check the TOP Topic in this Forum...That works...
RUU = the Update .exe file. That is de installer dat is going to Flash your PPC
So make sure that the Battery is at minimum 50% and that Active sync is connected Stable and that the Auto standby Energie mode is turned off.
This is what i picked up
Ayerthon said:
HardSPL = A Custom Windows Mobile Rom with some tweaks so that you can do stuff with your PPC
Click to expand...
Click to collapse
Think of it as a hacked BIOS that lets you install a hacked version of windows.
When your phone is HARD SLPed, means you can install any rom for that phone on it.
Remeber! Hard spl is just unlocking your phone to install other roms, but it will not sim unlock your phone!
it a form of a cid unlock trust me i had the same question and didn't want to sound like a noob
oddball1 said:
When your phone is HARD SLPed, means you can install any rom for that phone on it.
Remeber! Hard spl is just unlocking your phone to install other roms, but it will not sim unlock your phone!
Click to expand...
Click to collapse
but u can install a rom that is sim unlock option is avaiable
ok, some urgent help needed, yesterday ok, today will not start. only get as far as, 'smart mobility' R1.27.12.32 G22.45.88.07H D 1.56.00.00
phone is standard WM6 HTC. i have the 6.1 image for upgrading and tried to load using SD card, i get past tri colour screen, then loading, then checking then 'not allowed' and back to tri colour. it says KAIS130, SPL-1.93.000 CPLD-8. what?next
any help appreciated guys......
gazzacbr said:
ok, some urgent help needed, yesterday ok, today will not start. only get as far as, 'smart mobility' R1.27.12.32 G22.45.88.07H D 1.56.00.00
phone is standard WM6 HTC. i have the 6.1 image for upgrading and tried to load using SD card, i get past tri colour screen, then loading, then checking then 'not allowed' and back to tri colour. it says KAIS130, SPL-1.93.000 CPLD-8. what?next
any help appreciated guys......
Click to expand...
Click to collapse
To Flash a ROM you'll most likley need Hard SPL
Follow the "Getting Started" Link in my Sig.
If you cannot get WM to boot, you'll need to re-flash your orginal carriers ROM.
Ta
Dave
thanks for quick reply DaveShaw. fell at the first though, site for 'Cmonex's HardSPL 3.29SD' is blocked here in UAE, dont know why. are there any other links?
gazzacbr said:
thanks for quick reply DaveShaw. fell at the first though, site for 'Cmonex's HardSPL 3.29SD' is blocked here in UAE, dont know why. are there any other links?
Click to expand...
Click to collapse
You shouldn't be using cmonex's SD method the first time round. It is for upgrading only.
I have downloaded the package from point 2 (you should follow the USB method in post 3, NOT the SD set) and have upload it onto my site, please let me know when you are done with it.
http://taeguk.co.uk/xda/HardSPL and CidUnlocker.zip
Ta
Dave
ok, thanks DaveShaw, i have downloaded those files. the method in step 2 involves copying the jump progs to the device memory, which i do not have access to as it will not start. can i just copy to the sd card? thats why i was trying to flash a standard rom. i need a solution that will work just from the card. will the RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship.rar load using what i have on my phone now? i assume that the spl gets replaced when i upgrade to 6.1 with htc ruu. i can try anything as i have nothing to lose now (do i?)
gazzacbr said:
ok, thanks DaveShaw, i have downloaded those files. the method in step 2 involves copying the jump progs to the device memory, which i do not have access to as it will not start. can i just copy to the sd card? thats why i was trying to flash a standard rom. i need a solution that will work just from the card. will the RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship.rar load using what i have on my phone now? i assume that the spl gets replaced when i upgrade to 6.1 with htc ruu. i can try anything as i have nothing to lose now (do i?)
Click to expand...
Click to collapse
Enter your bootloader and try flashing any ROM supplied by your carrier to get into Windows Mobile.
What screen do you get stuck on? If it is the tri color screen check out the link in my signature.
Ta
Dave
Hi again, i am not actually 'stuck' on the screen as i can get into the loader, its just that i get the message saying that the (newer) rom will not load. i am extending my (c)rapidshare as free will not let me down load the 'standard' rom, then i will try that (just had to re-initialise my paypal and the passwords are on eWallet the phone, so ive reloaded the eWallet on my pc and ....so it goes on zzzzzzzzzz its funny how these things spiral down - not).
is there any way to update the spl only from the sd card?
gazzacbr said:
Hi again, i am not actually 'stuck' on the screen as i can get into the loader, its just that i get the message saying that the (newer) rom will not load. i am extending my (c)rapidshare as free will not let me down load the 'standard' rom, then i will try that (just had to re-initialise my paypal and the passwords are on eWallet the phone, so ive reloaded the eWallet on my pc and ....so it goes on zzzzzzzzzz its funny how these things spiral down - not).
is there any way to update the spl only from the sd card?
Click to expand...
Click to collapse
No.
Can your phone boot into Windows or not?
Ta
Dave
Hi, no, it will not boot to windows. just been reading around while 'RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship' is downloading. ive got connected with mtty and get cmd>. when i type boot i get 'Command Error !!!' i assume thats not good, i think rom is corrupted. tried standard HTC 6.1 RUU_Kaiser_HTC_FIN_3.29.414.0_radio_sign_25.83.40.02_1.65.17.56_Ship version 3.14.4.1 again on USB and after phone says 1% also message saying that it will not load error 294: invalid vendor id
gazzacbr said:
Hi, no, it will not boot to windows. just been reading around while 'RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship' is downloading. ive got connected with mtty and get cmd>. when i type boot i get 'Command Error !!!' i assume thats not good, i think rom is corrupted. tried standard HTC 6.1 RUU_Kaiser_HTC_FIN_3.29.414.0_radio_sign_25.83.40.02_1.65.17.56_Ship version 3.14.4.1 again on USB and after phone says 1% also message saying that it will not load error 294: invalid vendor id
Click to expand...
Click to collapse
Yeah, you need the ROM your carrier supplied.
Where is the Phone from?
Does a Hard Reset help?
Ta
Dave
woo hoo, yippeeeeeeeeeeeeee. the kaiser lives. back to standard 6.0 rom. cheers, i owe you a beer (or 2) if you are ever in abu dhabi, let me know ;-)
i can reload all from sprite backup (only from yesterday) to get me going again
but..... next will try to replace spl and then load 6.1. not sure why HTC standard would not let me update, i thought the ruu would update any htc phone
HardSPL 3.29 is first (yes?) then will try Kaiser_HTC_ASIA_HK_WWE_3.34.721.2 which sounds good. one more thing, my phone is not locked so do i need to do the 'SIM and CID-Unlock'
gazzacbr said:
woo hoo, yippeeeeeeeeeeeeee. the kaiser lives. back to standard 6.0 rom. cheers, i owe you a beer (or 2) if you are ever in abu dhabi, let me know ;-)
i can reload all from sprite backup (only from yesterday) to get me going again
but..... next will try to replace spl and then load 6.1. not sure why HTC standard would not let me update, i thought the ruu would update any htc phone
HardSPL 3.29 is first (yes?) then will try Kaiser_HTC_ASIA_HK_WWE_3.34.721.2 which sounds good. one more thing, my phone is not locked so do i need to do the 'SIM and CID-Unlock'
Click to expand...
Click to collapse
That's right, flash the HardSPL 3.29 first (SIM unlock is optional, CID unlock isn't needed - Hard SPL takes care of that - but it comes as part of the SIM unlock) then flash a WM6.1 ROM.
Ta
Dave
gazzacbr said:
not sure why HTC standard would not let me update, i thought the ruu would update any htc phone
Click to expand...
Click to collapse
Only if it's from the same region the RUU was intended for eg the European TyTN II's won't accept the latest Hong Kong WWE ROM by default because of this so as already suggested hardSPL works around this. My WM 6.0 UK original TyTN II upgraded to WM 6.1 OK but that was using the HTC UK provided ROM update. That updated everything required including the SPL and Radio to the required HTC versions. I'm back on the original WM 6.0 version though due to reliability issues with 6.1 and poor GPS performance.
Hello,
my phone keep rebooting after i've flashed him with a rom.
After a hard reset, i've manage to put in the spl screen, and now i'm connected with mtty.
Now i need
can you help me
Have you put the hardspl? or Uspl?
Put it in Bootloader mode and flash a shipped rom, after re-flash the hardspl and try other rom!
thks for your reply.
i've put hard spl.
i'ven't been able to flash it with an official rom cuz i haven't found many, and the one i've found in the forum (danish and swedish) still need the phone to be synchronised with active sync. where can i find a rom which doesn't need active sync ?
syroz said:
Hello,
my phone keep rebooting after i've flashed him with a rom.
After a hard reset, i've manage to put in the spl screen, and now i'm connected with mtty.
Now i need
can you help me
Click to expand...
Click to collapse
If you already hardspl ur device before all u need to do is go to bootloader mode connect to computer u might have to uncheck usb connection in mobile device center and reflash an official rom or another rom
It'sd now working !!!
the problem was just to unclick the usb option in active sync.
thanks dutty and thanks robertus3d.
btw dutty inscription to your website is not working. There is a message says that cookie a deactivated which is not the case.
Anyway thank you very much.
The greenscreen problem in the 1.56 roms is caused by the disptools.dll driver. Whenever you want to cook a rom based on this rom version simply replace the disptools.dll file from e.g. the 1.19 rom and the greenscreen problem is gone. It took me quite some time to track this down to a specific driver. However, glad I finally found out. Hope it helps.
i replaced 1.56 sys completely with topaz shipped sys. -> no problems.
didn't have time to play around with xip yet.
please link topaz sys
thanks
kwbr said:
- Replace the xip and sys, keep oem: system hangs at smart mobility screen.
Click to expand...
Click to collapse
Maybe you have done something wrong? Have you relocated the addresses using G'Reloc?
Niggurath said:
i replaced 1.56 sys completely with topaz shipped sys. -> no problems.
didn't have time to play around with xip yet.
Click to expand...
Click to collapse
Which spl do you use?
lewent said:
please link topaz sys
Click to expand...
Click to collapse
Take a look into the Topaz forums, there you will find the latest rom release.
johnpatcher said:
Maybe you have done something wrong? Have you relocated the addresses using G'Reloc?
Click to expand...
Click to collapse
Yeah, maybe. Will give it another try tomorrow. A bit tired, not the best moment to work on these things The green screen only appears with hspl.
kwbr said:
The green screen only appears with hspl.
Click to expand...
Click to collapse
I know, had experienced it for myself .
I' cooking a rom right now, maybe I will flash HSPL later on again (as I switched back to stock spl and used USPL).
i updated my phone to 1.54 spl and use USPL for flashing my cooked rom.
Niggurath said:
i updated my phone to 1.54 spl and use USPL for flashing my cooked rom.
Click to expand...
Click to collapse
I know. Had 1.54 running. The thing is (maybe completely pointless), I want to know what is causing the green screen, drivers, xip
green screen is over in touch screen, bigger problem here. Cant get active synch with pc to go back pppfff
harley4 said:
Cant get active synch with pc to go back pppfff
Click to expand...
Click to collapse
You don't need to have ActiveSync in order to get back. Read through the various threads, you have to reflash you stock spl, and then flash the new one using uspl.
johnpatcher said:
You don't need to have ActiveSync in order to get back. Read through the various threads, you have to reflash you stock spl, and then flash the new one using uspl.
Click to expand...
Click to collapse
and how do you do this with no connection
harley4 said:
and how do you do this with no connection
Click to expand...
Click to collapse
Just plug in the usb cable and go to the tri-color screen. There will be a connection, without ActiveSync .
johnpatcher said:
Just plug in the usb cable and go to the tri-color screen. There will be a connection, without ActiveSync .
Click to expand...
Click to collapse
Nope, tried it before. Tried it just now, no connection.
Have to get a micro SD adapter so i can flash it the disk way
what i did was extract 1.14 rom replace the rom and sys with the 1.56 rom and sys. in the oem replace all the package, OperatorPkg, OperatorPkg, OEMVersion, ConnectionSetupDB and cook it then it works on hspl with no green fuzzy screen
i had the same problem
this is a simple solution, u need to use Restore_Stock_SPL_115 and then the rom and it will work fine, i did the same this morning and its working fine.
harley4 said:
Nope, tried it before. Tried it just now, no connection.
Have to get a micro SD adapter so i can flash it the disk way
Click to expand...
Click to collapse
So you are seeing the tri-color screen says serial even though USB is plugged in?
I experienced the same thing last night - and ended up flashing a different rom using micro-SD adapter. I think you have the right idea
teimoshi said:
what i did was extract 1.14 rom replace the rom and sys with the 1.56 rom and sys. in the oem replace all the package, OperatorPkg, OperatorPkg, OEMVersion, ConnectionSetupDB and cook it then it works on hspl with no green fuzzy screen
Click to expand...
Click to collapse
Ok, tell us what is causing the green screen then
pmcall said:
So you are seeing the tri-color screen says serial even though USB is plugged in?
I experienced the same thing last night - and ended up flashing a different rom using micro-SD adapter. I think you have the right idea
Click to expand...
Click to collapse
up and running again pppffff
kwbr said:
Ok, tell us what is causing the green screen then
Click to expand...
Click to collapse
the 1.56 OEMDrivers causing my HD green fuzzy screen and unable to switch the phone on it either lock on airplane, bluetooth and wireless mode
teimoshi said:
the 1.56 OEMDrivers causing my HD green fuzzy screen and unable to switch the phone on it either lock on airplane, bluetooth and wireless mode
Click to expand...
Click to collapse
Ok, lets try to pin point it down to one of the drivers then.
Hi all,
Silly me, dont know what happen. It used to be dopod c800 with WM5. Updated the rom to WM6 and become P4350.After a while, very eager to put WM6.1 but i flashed with Elfin's Toch Flo ROM. I also not sure whether i have hardspl it or not. Check into bootloader my IPL 4.17.0001 and SPL 4.17.0000.
Now i am stuck, as it cannot turn onto hardspl (if not yet) cannot turn on to remove hardspl (if alredy spl). Already try RUU many roms but failed. Pls help me.
Well if you managed to actually flash an Elfin ROM, your device is most definately bricked completely. Thats a ROM for a completely different device that is 100% not compatible with the Herald.
ashasaur said:
Well if you managed to actually flash an Elfin ROM, your device is most definately bricked completely. Thats a ROM for a completely different device that is 100% not compatible with the Herald.
Click to expand...
Click to collapse
really? i've try to flash original dopod C800 RUU via SD card (rename .nbh to heraimg.nbh) but update fail. Also try to make a gold card using other mobile http://forum.xda-developers.com/showthread.php?t=417930 but stuck when other mobile security's locked. try to unlock security using Device Security Manager PowerToy for Windows Mobile 5.0 but that craps cannot detect the phone.
What to do now? throw it away?
lucky me!
Manage to power up and then LIVE as usual.
Nope! they not bricked completely!
well tell us how u did it.....
what i did: (tq to poppamops)
1. Find working HTC
2. 512mb SD card
3. QMAT software (google and install it)
4. Insert ypur sd in working HTC then run QMAT. You should see "create goldcard" in one of the tab.
5. After that, flash it to your "dead" htc via storage card. That's all. TQ