Hi Guys,
Recent got an XDA IIi after being with the older XDA II for over 16 Months.
But I have recently run into problems with my BT Car kit :
Motorola Bluetooth Car Kit HFW-8000.
Basically the problem is that it does not always connect to the Car Kit and when it does it will only from time to time connect and let me have a handfree conversation.
I have also used the Broadcom Bluetooth Cab file here in order to extend what Bluetooth Profiles that can be used but seems not to have any great bearing to stablize the issue.
So I went down the Hard Reset Road but again still intermittent issues, I then upgraded the ROM to the New one on the O2 Website the v 1.11.169 ROM.
I also had similar issues with the XDA II but it was resolved by using the Pocket Bluetooth tools, which was great and never once after installing it did I have any issues with the Car Kit.
http://www.bluetooth.jazztel.es/
One of my questions is, is there a similar programme to to above Pocket Bluetooth tools for the XDA IIi as I have tried it with the XDA IIi but does not work.
Or does anyone know how you would revert to have the XDA II radio or is there a work around for it.
Thanks Guys
Woody
Hi Woody_XDA,
I have had my XDA2i for a couple of months now and recently got a O2 blue headset for it, I had simular problems with the headset disconnecting and having to manually connect every time I switched it on. After browsing this wonderfull forum I decided to do a corperate install and get rid of the O2 active interface, since then no problems at all. I now use Pugs modified ROM version 162 with radio 1.04 and have no stability problems at all with no twice weekly reset. Hope this helps you and many thanks to Pug for his ROM.
Mace
Ditto, I also use the custom firmware with 1.04 radio and bluetooth works a charm. It still eats battery like nothing else, but it works with no problems. Also like the fact that the XDA can cope with my GPS receiver and my handsfree kit simultaneously, that's handy for in the car.
Cheers Guys for the information, took it on board and works great, did a great deal of stress testing in order to confirm it and works excellent..Thanks to PUG again and guys thanks for the info much appreciated and this is by far a great forum
Mace - you mention some bluetooth issues being resolved since you applied the custom ROM... I posted in the Alpine Applications forum here the other day a list of issues with bluetooth that I was wondering had been addressed - so far no reply - are these the symptoms that were cured for you??
Hi Bewlay Brother sorry, I missed your other post on Bluetooth issues, my original problem was that every time I switched on my BT headset , which is a O2 Blue, I had to open the BT manager and make the connection, the phone would then occasionally lose the connection and sometimes whilst still showing a connection refuse to transfer the call. This was using the official 162 ROM with the O2 active UI. I have since installed Pugs 162 ROM with radio1.04 and done a corporate install and BT seems to work perfectly, switch on the headset, it connects, never loses pairing and transfers calls.
Hope this helps you, and thanks again to Pug,
Mace.
Mace - what you describe sounds similar - my problems were essentially the loss of pairing with my Motorola headset a lot of the times when the XDAIIi switched off its display and went into stand-by mode, also if I closed the boom bike on the headset (to temporarily turn off the headset) it would fail to re-pair when I next opened the boom mike... the other issue was that I had to make sure the phone keyboard was displayed on the XDA once I had paired up otherwise the last number redial function on the headset would not work - if I pressed the dial button on headset and the phone display was not on the screen it would simply open the phone display function but fail to then dial the number - really crap. Also reception was poor to headset even over relatively short distances from the XDA. IF these areas in particular could be cured by the upgrade then I am eager to do it - I must admit I have read that this upgrade has not been without problems for some people here so it is going to be a tough call.
Just a thought, but have you done a personal or corporate install as I think the main fix with Pugs ROM was the upgrade to radio 1.04, which I don’t think affects the BT, so a corporate install with your existing ROM may make a difference.
Did a corporate install when it was new out of the box...
whats the difference between the corporate and personal install?
Corporate doesn't install ANY of the branded O2 interface - so no gubbins, nothing to slow down the phone, you just get a bog standard Windows Mobile 2003 SE installation, aside from the O2 GPRS and SMS settings. Bosh.
hi
i've been reading the posts and i have the same problem where can i get hold of pug's ROM if it's possible cos this seems to get rid of the problem
And then today, headset will not automatically connect, needing Bluetooth manager to be opened to make the connection. AARRRGH!
BT car kit problems
I have the 1.04 Radio, but it still won't sync with my 2003 BMW 325xi bluetooh or with my 2005 Acura MDX bluetooth.
Help!
Unstable Bluetooth Signal Strength - Samsung WEP200 Bluetooth Headset
Hi, I just got a Samsung WEP200 Bluetooth Headset. It would pair with my O2 XDAIIi but I cannot hear any voice in both incoming and outgoing calls. When I check the BT Manager, it shows a totally unstable BT strength that varies from very strong to very weak. The same headset worked well with other BT phones. My ROM version is 1.11.00 WWE, Radio version 1.04.00.
Any help would be greatly appreciated.
hi,
i have same problems with bluetooth and my parrot 3100. anybody?
thanks
Hi, as I posted before, I have problems with the vocal instructions of Tomtom6 . If I connect my Trinity with parrot CK 3100, the calls work, but the navigator instructions remain on PDA's loud- (so to say) -speaker. Is it the same for you?
VOIP SIP HTC Fuze
Installed and configured VOIP config tool on my WM 6.1 but it never works.
It shows Selected Internet calling but when i try to call ,,it fails without any error.'
Mani
I'm using my Diamond on my bike through a blue tooth connection to my intercom. Works like a charm - but when the phone rings, music (and GPS) sound is muted, and don't come back when the phone call is ended. The only way to listen to music again is to disconnect the blue tooth connection and start it up again.
Also when using GPS (Tomtom 7) it disconnect the phone call if there is a direction instruction.
Minor problems, but is there a work around?
[Solved]. I downloaded a program http://www.freewarepocketpc.net/ppc-download-btmusic.html
This does all what I'm asking for.....
My Diamond uses the latest rom version (1.93.7 something)
How do you do ?
Hello,
I'm a new user with a Diamond: How do you do, to put the Tomtom sound on the bluetooth audio ? I'm using an Airoh W-Conn system.
I have a Diamond with a Orange France ROM, and my Tomtom 6.
Thanks in advance,
Alex.
Don´t steal my thread ;-)
Please make your own thread.
If you have a problem with your Diamond, it is better to adress the problem directly. I do not have a clue for you. I just turn the gizmo on - and it works. You could read the manual to TomTom7. There is a section about Blue Tooth a.f.a.i.r.
pepitoalex said:
Hello,
I'm a new user with a Diamond: How do you do, to put the Tomtom sound on the bluetooth audio ? I'm using an Airoh W-Conn system.
I have a Diamond with a Orange France ROM, and my Tomtom 6.
Thanks in advance,
Alex.
Click to expand...
Click to collapse
Use the program http://www.freewarepocketpc.net/ppc-download-btmusic.html
It will do the trick.
Hi to everybody, I have a problem on my diamond H3G brand that only you can resolve.
The audio of the loudspeaker of my diamond during the calls results distorted and some times it disappears for some second.
All of this doesn't happen when I insert headset or speakerphone.
I have tried to update to the version 1.93.408.3_R official ITA HTC and later to the the version DIB 1.9 but the problem it persists.
I think that the problem is introduced after the use of advanced config tool v 3.3 and Diamond Tweak.
Excuse me for my bad english.
thanks to all for the help.
Fabio-x
Hi xda folks,
I have a little problem with my bluetooth in my new car hifi (Pioneer AVH3200BT).
I have set BT on in my X1. It is invisible. I have installed a WinMo 6.5.
Now i have set the AVH3200BT visible and a keycode.
After searching other devices over my X1 and connecting the AVH3200BT I give it the keycode and the devices are connected.
Thats easy
But now.. I will call a friend over the car hifi.
On touch display I go to the phone book and it shows me .. nothing, no numbers, no names, definitely nothing
In the calling lists also..
I have no idea.. no settings in AVH3200BT for a WinMo phone and no setting found for sharing calling lists and phone book...
Is here anyone who can help me?
regards
nibbel
Hi,
I had the same problem. Empty Phonebooks and no Textmessages. I installed JETware Hands-Free Extension for Windows Mobile and everithing is working.
There are two versions:
Opensource is working with Xkan's ROM V7.0 on my xperia.
bthfx.codeplex.com/releases/view/26480
With the original ROM only the older Shareware Version was working
regards Martin