Related
This is quite a common problem, from what I have gathered reading from the web, but haven't found a solution yet.
I could Sync perfectly via Bluetooth using Actve Sync 4.2, but ever since I received a file from another phone via bluetooth Active Sync doesn't show up as an option when I pair my phone with my laptop, hence no Active Sync via Bluetooth.
What could have gone wrong? Anyway of getting my Active Sync to work with the Bluetooth again? I have tried everything possible, hard reset, re-installing Active Sync, re-pairing etc. etc.
Please to help... anyone???
i spent a day trying to connect to activesync using bluetooth, when i finaly manage to do this and disconnect it , next time i spent another couple hours trying to connect it again as it was before ). and i think i realize all specifics of that procedure. ur main goal is to recognise computer paired device as device connected via activesync service and not the "serial port" service on ur PDA.
That I know...
Thanks, for that, but that I know, problem is how to make the PDA realise that my system has Active Synch and not Serial port! Have you managed to find that out? If you have then please let me know. Thanks in advance.
It actually depends on what Bluetooth stack yr LapTop has, Broadcom,BlueSoliel, Toshiba or MS..U need to add a virtual Serial Port..set that serial port in yr Async connections on yr LapTop..then re-do the BT search on yr PDA and now it will show Async service in yr device..
yep, in my case its a toshiba one, and u need to set incoming and outgoing port on computer this way: com6 local client port, com7 local server port. and set activesync on com7, and make a connection on computer with pda on port 6 but do not coennect it, after that make a connection on pda with computer, and try to refresh list of services that computer provides untill "serial port" becomes "activesync", then launch activesync on pda and hit connect via bluetooth option, thats it.
Using MS Bluetooth software.
I am using the Microsoft Bluetooth software and there is only incoming and outgoing. Kept refreshing but only shows 'Serial Port'!
__s said:
yep, in my case its a toshiba one, and u need to set incoming and outgoing port on computer this way: com6 local client port, com7 local server port. and set activesync on com7, and make a connection on computer with pda on port 6 but do not coennect it, after that make a connection on pda with computer, and try to refresh list of services that computer provides untill "serial port" becomes "activesync", then launch activesync on pda and hit connect via bluetooth option, thats it.
Click to expand...
Click to collapse
You are an absolute genius. I would never have thought about the "refresh" on the PDA bluetooth settings. It worked. I had given up previously so many times!!!
Eric
__s said:
yep, in my case its a toshiba one, and u need to set incoming and outgoing port on computer this way: com6 local client port, com7 local server port. and set activesync on com7, and make a connection on computer with pda on port 6 but do not coennect it, after that make a connection on pda with computer, and try to refresh list of services that computer provides untill "serial port" becomes "activesync", then launch activesync on pda and hit connect via bluetooth option, thats it.
Click to expand...
Click to collapse
I tried this port with com5 and com9 instead because 6 and 7 were taken (by what??). But unfortunately it didn't work, kept showing "Serial port" even after many refreshes.
What a nuisance
I had a similar problem. One of the reasons I bought the MDA was to sync wirelessly, and I never got this to reliably work, and wound up using a USB cable. The problem is that if it doesn't work without doing something, it is more trouble than the cable. Here are my notes about making bluetooth work:
A workaround is (i) on the MDA, go into bluetooth settings, open the PC listing and uncheck and then recheck the ActiveSync service, and (ii) shut down ActiveSync and restart it on the PC, using ActiveSyncToggle (Google for it). This program also solves the problem that activesync would start and then report that it couldn't find the bluetooth dongle for the idiotic reason that ActiveSync started before the bluetooth dongle was started. ActiveSync doesn't have an Exit/close button, and ActiveSyncToggle provides it.
Bluetooth&ActiveSync
kull said:
I could Sync perfectly via Bluetooth using Actve Sync 4.2, but ever since I received a file from another phone via bluetooth Active Sync doesn't show up as an option when I pair my phone with my laptop, hence no Active Sync via Bluetooth. What could have gone wrong? Anyway of getting my Active Sync to work with the Bluetooth again? I have tried everything possible, hard reset, re-installing Active Sync, re-pairing etc. etc.
Click to expand...
Click to collapse
It's rather simple. Once you pair PDA & PC with ActiveSync, you got a connection - PDA with PC (ActiveSync) via USB. This you can see in ActiveSync -> Connection Settings - checked box near "Allow USB Connections".
And if you'll pair your PDA with PC by Bluetooth (I have BlueSoleil installed), you'll have a Com port (#7 in my case) applied to your PDA - not in PDA, in PC - so you must sign this port in ActiveSync -> Connection Settings -> check box "Allow connection to one of the followings:", choose right port from the list (#7 in my case), tap "OK" (but not "Connect"!!!) - and then try to refresh BT connection on your PDA - you'll see pretty soon - "connection type - ActiveSync". Then choose "connect via BlueTooth" from your PDA - Voila! Yuo're synchronising via BT!
BUT!!! From now on this silly ActiveSync will mind, that you wish to synchronise ONLY by BT! Look in "Connection Settings" - you'll see that "Allow USB connections" is unchecked! That means, you're not able to connect via USB any more!
So, if you want to connect via USB one thing you must to do - is to check this damn box manually! And you again can synchronise via USB.
And from that on - if you want to synchronise via BT - uncheck this box and check "Allow connection to one of the followings:" and check the propper Com port.
So thats all. Have fun!
Right
rusigor said:
BUT!!! From now on this silly ActiveSync will mind, that you wish to synchronise ONLY by BT! Look in "Connection Settings" - you'll see that "Allow USB connections" is unchecked! That means, you're not able to connect via USB any more!
So, if you want to connect via USB one thing you must to do - is to check this damn box manually! And you again can synchronise via USB.
And from that on - if you want to synchronise via BT - uncheck this box and check "Allow connection to one of the followings:" and check the propper Com port.
Click to expand...
Click to collapse
That is probably the problem for me, I sync with two PCs, so when I got one working, trying to sync with the other would bollix up the first's settings.
I have no experience synchronising with 2 PC's. Suppose, you'll have to pair with both PC's and watch right connection settings every time - is particular PC switched to synchronise by USB or by BT - before trying to synchronise!!!!
Else you'll be forced to delete all synx. settings from you PDA (AS page) every time (IMHO)... and pairing you devices from beginning...
Solution found at last!
This was the solution to MY problem:
Originally Posted by miguelromerom
Found a possible "solution" for some people who have been having problems estabishing a BT AS Partnership with their Universal and a host computer running AS. What I found was you may need to edit the registry to fix the problem. Here's what happened to me yesterday:
Morning: Hard reseted my device and installed all my software apps at my work computer via AS in USB mode as a Guest. Note: I have not set up a partnership with any computer (either USB or BT).
Evening: Got in my truck and paired my JasJar to my BT GPS receiver via a BT Serial Port. Used TomTom and navigated home.
Late Evening: Got home. I wanted to set up a BT AS Partnership first so I went through the procedures of pairing my device and my home computer. And guess what, it didn't work. My JasJar would not see that AS was an available option on my home computer (NOTE: Before Hard Resetting my device in the morning, I had previously established a BT AS Partnership with my JasJar so I know my machine supported that profile). What the @?#~! Ok. I did a search of the word "sync" through the registery. Came up with an interesting issue. Under the registry entry:
HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Ac tiveSync\
In that directory I saw a folder listed as: 000a3a051d0f (This folder is specific to my device (more below)). I was wondering what this was since I did not have any BT ActiveSync Profiles set up yet. When I looked in it, I realized immediately that this is the Device Profile for my GPS RECEIVER!!!! What the hell was it doing in this directory I asked myself. So I deleted the folder 000a3a051d0f from the directory:
HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Ac tiveSync\
And guess what? I was able to establish a partnership via BT immediately!!!
Hope this helps anyone else facing similar situation... I guess when I sent something via a Nokia phone it created a key which kept recognising my laptop as having only serial port. Once deleted - pronto my laptop showed up saying it had Active Synch!
Folks, when I attach my Kaiser (MDA Vario III) to my laptop using Bluetooth, I can sync without a hitch... However, when I caonnect it via USB, I get the following: [see screenshot attached]
Any ideas? I can't fins any info on t'web?
Right... Had my Tytn (SPV M3100) replaced by Orange. This now does the EXACT same thing. Vista SP1, methinks...
Make sure you have the latest Windows Mobile Device Center installed and while your kaiser is plugged in run windows update and see if there are any driver updates available.
Try killing mobsync.exe in task manager (on the desktop pc). Then restart WMDC.
or plug in the usb, then open windows update and check for updates, it will detect it hasnt got the relivent drivers and downloadn them for you. normall its supposed to do it automatically if it doesnt find the drivers but for some reason it didnt work
Thanks sofar...
But I've tried all of the above.... To death. It works fine with my Athena & my Tytn, not with the Kaiser though...
I've been having the same problem. Thought it was one of the roms I had cooked initially but then I tried a few more roms (Duttys was one) and I still couldnt sync. Either on WMDC in Vista or ActiveSync on XP.
Now I think the USB is damaged - although it still charges fine. Bluetooth sync is fine too.
Now, i don't sync my device at work on my vista machine, but i can still connect to it.
None the less, I was looking at my windows update history and when i first installed the mobile center or whatever, i downloaded an update that is listed as failing to install in y windows update history.. so.. id ont know why it fails.. but yeah..
Had the same problem, but seems to be OK now.
I followed the help file in the Mobile device center -troubleshooting a cable connection. I post it her for reference. Don't know exactly what solved the issue (I hope permanently) but possibly the firewall ports?:
-----------------------
Check the device for relevant system messages and address any conditions affecting the connection.
Ensure that the device and the PC both have USB connections enabled:
In Control Panel set to Classic View, open Windows Mobile Device Center. Select the Allow USB connections check box.
In ActiveSync on your device, click Menu > Connections, then select the Synchronize all PCs using this connection check box.
Disconnect and reconnect the device.
Disconnect, restart, and reconnect the device.
Disconnect the device, restart the PC, then reconnect the device.
Do the following:
Disconnect the device.
Open the following ports for all programs in the PC firewall:
990: open inbound TCP port
999: open inbound TCP port
5678: open inbound TCP port
5679: open outbound UDP port
5721: open inbound TCP port
26675: open inbound TCP port
Reconnect the device.
Do the following:
Disconnect the device.
Disable the antivirus program.
Reconnect the device.
Do the following:
Disconnect the device.
Open Network Connections in Control Panel on the PC.
Right-click the local area connection created by Windows Mobile Device Center, then click Properties.
In This connection uses the following items, select every check box (to select all protocols).
Reconnect the device
fixed for me
I was having this problem. I'd also noticed that windows update was having problems installing a related update 'windows mobile remote adapter'.
Followed the advice in the help file re opening ports in the firewall. (FYI when adding a port just type the port number in the name field and in the port field).
It still wasn't working but when I did windows update after opening the ports it worked and is now connected.
Hope this helps
-------------------------
v1615 on Orange UK
ROMeOS.v4 07/27/08
radio 1.65.24.36
Try this, it worked for me.
Go to start<<settings<<connections tab. Then select the USB to PC icon. Uncheck enable advanced network functionality. Restart PPC and then try to re-sync.
I don't even know what enable advanced network functionality does. When unchecked, I see "connecting to host" everytime I cradle my Tilt. AND I never have sync problems, nor do I get the error message alluding to changes on the server and all changes will be lost.
I browse the Internet on my laptop using to the GPRS/EDGE connection of my network provider and Internet Connection Sharing on my Kaiser.
I have been trying hard to establish a Dial Up Networking using either a Bluetooth or USB but with no success.
Bluetooth:
1. I make my laptop Bluetooth enable by using a BlueTooth dongle.
2. Pair the Kaiser and Laptop.
3. On my Kaiser, I cant see any service listed.
4. Though i can see that Win XP did detect a Bluetooth Modem and it installed it. When i "Query Modem" in my Control Panel for the BT modem, it does successfully query it.
5. I create a new Dial up connection and use this modem, however it never starts to connect to the GPRS.
I do have a Sony Ericsson T610, where i do exactly the same thing and the internet works like a charm.
Please can somebody explain me step by step process how to achieve this. I have read 100's of forums and imported many registry keys but it simply doesnt work. The same was the case with my Hermes(TMobile Vario II).
The ROM details are in my signature.
Thanks in advance.
Activesync?
last time i tried this, i used a USB cable and activesync was installed on my pc...it worked like a charm and the steps are oh-so-easy!!!
using a USB cable, follow these steps:
1. ensure the applications on your phone (web browsers, weather applications, etc) can use your data connection (edge/gprs) just fine
2. on your pc, you have to have either activesync installed (if you have windows xp) or windows device center (if you have windows vista)...i have only tried this with activesync so can't guide you further regarding vista
3. sync your phone and pc with activesync...just plugging in the USB cable on your phone and pc will usually get activesync going
4. on your phone, go to "Settings->Connections->Comm Manager" and hit the "Internet Sharing" button...a configuration page will open...select "USB" under "PC Connection" and whatever your data connection name is on your phone under "Network Connection"
5. hit connect!
now on your pc, check if the internet applications are working!
Note: it helps to disable ALL OTHER network interfaces on your pc from Device Manager
ASCIIker said:
last time i tried this, i used a USB cable and activesync was installed on my pc...it worked like a charm and the steps are oh-so-easy!!!
using a USB cable, follow these steps:
1. ensure the applications on your phone (web browsers, weather applications, etc) can use your data connection (edge/gprs) just fine
2. on your pc, you have to have either activesync installed (if you have windows xp) or windows device center (if you have windows vista)...i have only tried this with activesync so can't guide you further regarding vista
3. sync your phone and pc with activesync...just plugging in the USB cable on your phone and pc will usually get activesync going
4. on your phone, go to "Settings->Connections->Comm Manager" and hit the "Internet Sharing" button...a configuration page will open...select "USB" under "PC Connection" and whatever your data connection name is on your phone under "Network Connection"
5. hit connect!
now on your pc, check if the internet applications are working!
Note: it helps to disable ALL OTHER network interfaces on your pc from Device Manager
Click to expand...
Click to collapse
I dont want with Internet Connection Sharing. I want to use with Bluetooth Dial-up networking. Why? The reason is that with ICS, my screen glows permanently(even at the lowest bright option) and eats the battery. BT the screen will go off and still be connected.
True true...BUT!
sahuja said:
I dont want with Internet Connection Sharing. I want to use with Bluetooth Dial-up networking. Why? The reason is that with ICS, my screen glows permanently(even at the lowest bright option) and eats the battery. BT the screen will go off and still be connected.
Click to expand...
Click to collapse
that makes sense...BUT...the phone charges when it is connected to USB so Internet Connection Sharing worked well for me on my DESKTOP...but you have a laptop so it wouldn't make much sense in the long term to have your phone charge off your laptop's battery when you're on the go! i see your point!
I've spent several hours attempting to get this working, I've even bought two new BT dongles for my computer for testing.
Is it at all possible to get activesync working over BT on the diamond? Can't seem to get the ActiveSync profile offered... Neither on my PC or my phone!
audiophil said:
I've spent several hours attempting to get this working, I've even bought two new BT dongles for my computer for testing.
Is it at all possible to get activesync working over BT on the diamond? Can't seem to get the ActiveSync profile offered... Neither on my PC or my phone!
Click to expand...
Click to collapse
Same happend to me until I found the right settings after that I just get irritated when my cable connection doesn't work, in other words I just use it whitout even nowing what the settings are, maybey I can help you if you tel me your settings and show some screendumps, after that I can show you some screendumps whit a working bluetooth connection.
Ps I am not giving any garanty just want to keep my own bluetooth connection
Willem
It works fine for me with Mobile Device Center. Remember to enable BT connection on desktop Activesync options, or else the profile won't appear when you pair with the phone.
I've never got BT/AS to work either (and I've spent days trying), as you say, I never get offered the AS service.
I did see it *once* on the Diamond when I was trying to connect another service (maybe Obex) but I didn't realise how important that was at the time.
I'm using XP/SP2 with the Toshiba stack but I've tried the BlueSoleil stack also with the same result.
I'm guessing this is a problem with the Diamond as I can happily connect with my Artemis via BT to the same laptop
Mee too, I saw the AS-service ONCE, but never ever again.. .:'( Tried 3 dongles and probably 6 different stack implementations.
I'm using XP as well, are the only success stories related to Vista?
Never seen it.
A bad-developed thing with MS and activesync, too bad.
I don't now how your guys try to connect I just can tell how my connection works flawless.
First of all and most important problem whit me was that I have to use the phone to make the connection and not the pc/notebook offcourse you have to allow active sync to acces your phone, in my case this is is found at file connection and allow conection for a compoort in my case com7, then I switch bluetooth on at my phone (and not try to sync straight away cause this results often in a faillure ) and then connect true bluetooth at my phone using the comand connect true bluetooth at active sync at my phone.
One of the strange things which have to set is "All connections use this connection and there is selected "USB" this maid seems trange but I believe the compoort is a virtual one which is used to connect at USB for that reason you have to add a compoort before making your connection, if done right your Diamond will ask for it as soon as you setup the bluetooth connection, the last thing can be wrong cause I don't remember quite well how I did the setup of that part, just because I never use any other connection anymore seems I mannaged to get it working.
This way I can even use it as a wireless webcam which can make you do funny things, the danger of it is when some good programmer makes a virus which allow to setup that connection remotley, aswell the connection whit pocketcontroller I don't want to think off what would hapen if someone manage to get controll of my phone.
Don't now or this is helpfull if any questions feel free.
Willem
On my diamond the only service I can find on my laptop is:
Serial Port
Wireless Stereo
AS set to use the same port as the incoming port in my bluetooth manager...
If you set COM ports right, you tie Diamond with PC using Diamond's ActiveSync. Start/Programs/ActiveSync, the Menu|Connect via Bluetooth. It should ask you now to make a new connection. Tap yes, it will search for BT devices. Choose your PC. If you did everything all right, now you will be connected.
(this may be obvious but I had some problems at start; I thought you initiate the connection on PC)
kosherpig said:
(this may be obvious but I had some problems at start; I thought you initiate the connection on PC)
Click to expand...
Click to collapse
Yes... But what to do when this fails? Anyone ever encountered the "no activesync profile" problem and actually solved it?
audiophil said:
Yes... But what to do when this fails? Anyone ever encountered the "no activesync profile" problem and actually solved it?
Click to expand...
Click to collapse
I gues if there is no active sync profile yet you have to create one what maid be possible aswell is that your settings under active sync/options at your phone where you must selct the options which you want to be syncted, if nothing is selected there it will make a connection but will not sync.
This worked for me
To Async using MICROSOFT Stack do the following:
a. open Control Panel and open Bluetooth Devices
b. click Add and add your device. go to Options and mark "Allow Bluetooth devices to find this computer" and "Allow Bluetooth Devices to connec to this computer". you can also mark other options as desired.
c. go to COM ports and add an INCOMING port. it will choose a port for you automatically.
d. go to WMDC/Connection Settings and mark "Allow connections to one of the following.." and choose the port you created.
e. go back to Devices and choose your PDA. choose Properties and go to Services. there you should see all services your PDA provides. one of them should be Active Sync Bluetooth Service. mark it and click OK. your comp and PDA should connect and disconnect a few secs later.
f. on your device, open ActiveSync and under Menu choose Connect Via Bluetooth.
I just provide my solution.
I use IVT BlueSoleil to manage my BT dongle. After installed, the BT dongle could be recognized as a COM port on the PC. Check through the PC device manager to know what the port number is, then adapt in Activesync, select "Allow connections to one of the following", select COM7 in my case.
Enable BT on the Diamond to make it visible to PC, after paring the PC with Diamond, Diamond could recognize the PC provides ActiveSync services.
Go to Diamond's ActiveSync, select connect via BT, PC will automatically accept the connection from Diamond.
P.S I am not a native English speaker, I just wonder if I could make you understood.
netmaomao said:
I just provide my solution.
I use IVT BlueSoleil to manage my BT dongle. After installed, the BT dongle could be recognized as a COM port on the PC. Check through the PC device manager to know what the port number is, then adapt in Activesync, select "Allow connections to one of the following", select COM7 in my case.
Enable BT on the Diamond to make it visible to PC, after paring the PC with Diamond, Diamond could recognize the PC provides ActiveSync services.
Go to Diamond's ActiveSync, select connect via BT, PC will automatically accept the connection from Diamond.
P.S I am not a native English speaker, I just wonder if I could make you understood.
Click to expand...
Click to collapse
I think the majority here isn't a native English speaker, this forum isn't a forum about language but about phones and pda's if someone wants to show how good his/here English is they beter look for another forum.
I think this forum is one of a few where the solution which someone offers weights more then the way its sad, unless its offending.
Untill now (I don't now what I am calling over myself now) I never got any critics at my English which is far from perfect the last thing wasn't nescesary to say even a blindone could see it whitout braille.
hays said:
This worked for me
To Async using MICROSOFT Stack do the following:
a. open Control Panel and open Bluetooth Devices
b. click Add and add your device. go to Options and mark "Allow Bluetooth devices to find this computer" and "Allow Bluetooth Devices to connec to this computer". you can also mark other options as desired.
c. go to COM ports and add an INCOMING port. it will choose a port for you automatically.
d. go to WMDC/Connection Settings and mark "Allow connections to one of the following.." and choose the port you created.
e. go back to Devices and choose your PDA. choose Properties and go to Services. there you should see all services your PDA provides. one of them should be Active Sync Bluetooth Service. mark it and click OK. your comp and PDA should connect and disconnect a few secs later.
f. on your device, open ActiveSync and under Menu choose Connect Via Bluetooth.
Click to expand...
Click to collapse
Worked flawlessly for me as well. Thanks.
hays said:
This worked for me
To Async using MICROSOFT Stack do the following:
a. open Control Panel and open Bluetooth Devices
b. click Add and add your device. go to Options and mark "Allow Bluetooth devices to find this computer" and "Allow Bluetooth Devices to connec to this computer". you can also mark other options as desired.
c. go to COM ports and add an INCOMING port. it will choose a port for you automatically.
d. go to WMDC/Connection Settings and mark "Allow connections to one of the following.." and choose the port you created.
e. go back to Devices and choose your PDA. choose Properties and go to Services. there you should see all services your PDA provides. one of them should be Active Sync Bluetooth Service. mark it and click OK. your comp and PDA should connect and disconnect a few secs later.
f. on your device, open ActiveSync and under Menu choose Connect Via Bluetooth.
Click to expand...
Click to collapse
I was able to sync my Diamond using WMDC on vista using these steps, with a few modifications.
I had to leave my WMDC "Connections Settings" pull-down box on "Bluetooth" for it to work for me. I'm using a USB dongle, this may be why.
On step (e), after opening the "Services" tab and unchecking, then rechecking the "Active Sync Bluetooth Service" box and hitting Okay, my device would be listed as "Connected" on the main Devices tab for a few seconds before disconnecting (about 3 seconds). I had to initiate step 4 BEFORE the device disconnected. So basically I had 3 seconds to start the Bluetooth sync to get them talking. Haven't had any problems since!
-Mike
This is what worked for me, when not able to get the active sync profile.
In settings for "USB to PC";
turned off 'enable advanced network functionality'
My PC and my Diamond didnt show me any services. Because of that it says no device is paired when i want to connect, although my PC is paired.
I use XP SP3 and the Windows BT Stack.
xp SP3 is a problem ?
cuz nothing work for me
Doesn't work for me either.
Using Vista64SP2.
It worked before but eventually stopped working now.
I see ActiveSync on the Phone and on the Notebook.
AS tries to establish a connection for some seconds but cant do it.
//edit:
Ooook, after Firmware-Flash of new o2 Germany v2.03.207.2 everything's working again. *strange*
I have a problem with my diamond (now with BsB 6.5I rom)
usually, when connected by usb cable to the pc, a menu pops out and allows me to select between active sync, disk mode and internet sharing
now, when I connect the diamond to the pc, automatically starts with internet sharing
how can I sync with active sync if I cannot select the right mode?
Start->Settings->Connections->USB to PC
Check the "Ask about conneciton type when I connect" checkbox and then it'll prompt you which of the two you want each time you plug the phone in.