WiFi & 3G Connections - Touch Diamond, MDA Compact IV General

Hi,
Is it possible to make my HTC diamond attempt to connect to the internet through my Home WiFi connection before it connects via 3G.
Basically I want WiFi to be default and only to use 3G whilst i'm roaming about.
Cheers
John

If you turn your wifi on and set it up for your home network. then as long as the wifi is still on, it defaults to using that first. If your not at home just shut the wifi off
It's not perfect, but I haven't seen any other methods out there.

MoDaCo's NoData is what you need:
http://www.modaco.com/content/pocket-pc-software/246171/new-free-utility-nodata/

I have question about WiFi. Every time I turn off display (or turn off itself automaticaly), it disconnect from network but when I´m on ICQ then I cant recieve any message. Is possible to be connected permanently?

Related

How to force wifi when available?

Ok, this was working fine on the original AT&T ROM, but since I flashed to dutty's ROM, I cant get it to work. How do I force the phone to use wifi for net access when wifi is turned on, as opposed to medianet? Currently, I have to keep manually switching from medianet to "my work connection" in connection settings.
You can use Kaiser Tweak to set it to disconnect the GPRS connection after a set amount of minutes of inactivity. Then, when you enable WiFi, it should connect ONLY to WiFi.
I think the OP needs to sort out his "work" and his "internet" instead of just trying to turn off radio data.
I have medianet set to internet and my wifi set to work...not really clear what "work" is....just want to automatically use wifi when wifi is connected, and cant find the option to do that.
Anybody???
I did set both connections to "work".
Additionally I added my tmobile gprs connection to the work profile.
All seems to work great.
I can acces my network shares over wifi and connect to the internet. When no wifi is available it connects via gprs.
I keep getting confused on this same issue. i installed the same rom we are talking about. it shows up for me when setting up email accounts. with my wifi turned on, it still tries to go out the 3g connection. I want it to use wifi if that is what is turned on and i think that was working on the death star rom. For the drop down that says "The Internet" I basically want that to point to wifi if on then fall back to 3g. How do we do that?
It should not be named "work".
So whats the solution here?
Under Connections....Select which networks are automatically used:
Programs that connect to the internet should connect using ???
I can either choose Medianet or my work network, I'd like for it to use wifi when available, how is this done?
Programs that connect to a private network should connect using ???
I have this set to my work network.
Easy Solution to 'Auto Wifi"
Buy an Iphone, works seemlessly, and you get a browser too which works, something these HTC phones havn't had in 3 years.
The easiest way to force wifi (since gprs can be acting as a ***** ), is to keep wlan enabled and to install the NOGPRS.cab (aka the modaco nodata plugin) which allows you to disable (but keep) the gprs settings and which you can toggle on (and back off) when needed.
Great little app, saves much annoyance!
Is there an easy way to toggle wi-fi on/off, that can be assigned to an icon or button? At the moment I have to open Comm Manager each time and do it from there.
Rob F

Turn off Internet connection

I will be traveling, and want to turn OFF my Internet so i dont incur roaming charges... is there a way to keep phone on, turn off internet and use wifi only? also, is there way that when wifi is connected, the 3g or edge wont turn on? only when connected to wifi.. not when wifi present. thanks!
Try MoDaCo NoData
http://www.modaco.com/content/pocket-pc-software/246171/new-free-utility/

Losing Wi-Fi after being on 3G/HSPDA

Hi guys,
I have this problem - I use wifi at home for a while. Then go outside and the phone connects to my 3g ISP and then when I get home with wifi available I can disconnect from the 3g network, but I can't connect to the wifi without resetting the device. I can see that it connects to my home wifi, but it is not using it and the wifi icon in not shown in the taskbar (until reset).
Any idea what is causing that?

Working with Mail in TD2

Hey,
For some reason every time I try to download new messages or send a new e-mail, the device uses the 3G connection (data connection - even if it's turned off in the communications screen, it just turns it on automatically).
Problem is, I rather use my WiFi instead. Is there a way to use Mail with my WiFi connection, rather than my date connection by my cel company?
Thanks
Is you Wi-Fi actually turned on? If not then it will always try to use the Cellular connection. Mine happily gets mail over Wi-Fi if it is enabled and connected to network
Yeah... even if my WiFi is on it goes through 3G to get the mail or send it.
What kind of an account have you set up? POP3/IMAP/...?
how i am doing it
what i did is create a false connection under the conection icon in all settings.
so i have 2 of them: my 3g conection and the other one where i have left all the fields blank access point, login, password etc.
when i don't want to use 3g i select my fake conection and i am able to use wifi etc... and it assures me that the phone won't dial without me knowing it; and when i want to use my 3g i just select it from the manage conection under conection icon in all setting.
that's the way i do it, it is not something i am proud of but it works great and does the job
cheers

WIFI

Morning all,
I just got a touch diamond2, this is my first fone with wifi. a couple of questions!
when i'm at home or whereever and connect through wifi this has no impact on download limits within my fone contract?
Does the fone automatically no to use wifi for the internet connection when one is connected?
my fone doesn't stay connected to my home network, it finds it and connects ok but then a min or so later it says 'not connected, networks available'?
any help appreciated
Cheers
Gazza
Hi,
Using WiFi connections at home will not contribute to your mobile data plan. Wi-Fi data does not go over the cellular networks, and therefore is not part of your contract plan. This also means that you can use VoIP, streaming video, and other services over Wi-Fi, whereas you may not be able to over your mobile data plan.
The phone will not switch automatically between Mobile Data and Wi-Fi. You would need to close the Mobile Data connection, and re-start with Wi-Fi every time you wanted to switch.
Your mobile phone WiFi connection may be entering a power-saving mode when idle; To disable this, download the Advanced Config Tool http://forum.xda-developers.com/showthread.php?t=418151 and install it. Open the Advanced Config Tool and look for the Network settings. The bottom two options should be "Turn off Wi-Fi if no activity" and "Wi-Fi Auto off timeout" Change these as appropriate.
Hope this helps!
Hi, here are my answers based on my experience:
1) When connected to a WiFi network (eg. home, work,school etc) your phone operator is not in the position to charge you anything.You'll be charged only if using your operator GPRS,3g etc services. If you want to avoid Operator connections use Nodata.cab or make the right settings in Advanced config or HD Tweak.
2) Once Wifi connection established, it should have the priority on other data connections.
3) Wifi connection stability depends on radio and ROM you're using, my solution is to to set "Maximum Performance" in the Power Management tab under Wifi Settings. Not doing this leads to instable or even "fake" connections: windows says you're connected but no data traffic occur This is the only workaround I know, any other suggestion is super-welcome!
Cheers

Categories

Resources