WIFI - Touch Diamond2, Pure Q&A, Help & Troubleshooting

Morning all,
I just got a touch diamond2, this is my first fone with wifi. a couple of questions!
when i'm at home or whereever and connect through wifi this has no impact on download limits within my fone contract?
Does the fone automatically no to use wifi for the internet connection when one is connected?
my fone doesn't stay connected to my home network, it finds it and connects ok but then a min or so later it says 'not connected, networks available'?
any help appreciated
Cheers
Gazza

Hi,
Using WiFi connections at home will not contribute to your mobile data plan. Wi-Fi data does not go over the cellular networks, and therefore is not part of your contract plan. This also means that you can use VoIP, streaming video, and other services over Wi-Fi, whereas you may not be able to over your mobile data plan.
The phone will not switch automatically between Mobile Data and Wi-Fi. You would need to close the Mobile Data connection, and re-start with Wi-Fi every time you wanted to switch.
Your mobile phone WiFi connection may be entering a power-saving mode when idle; To disable this, download the Advanced Config Tool http://forum.xda-developers.com/showthread.php?t=418151 and install it. Open the Advanced Config Tool and look for the Network settings. The bottom two options should be "Turn off Wi-Fi if no activity" and "Wi-Fi Auto off timeout" Change these as appropriate.
Hope this helps!

Hi, here are my answers based on my experience:
1) When connected to a WiFi network (eg. home, work,school etc) your phone operator is not in the position to charge you anything.You'll be charged only if using your operator GPRS,3g etc services. If you want to avoid Operator connections use Nodata.cab or make the right settings in Advanced config or HD Tweak.
2) Once Wifi connection established, it should have the priority on other data connections.
3) Wifi connection stability depends on radio and ROM you're using, my solution is to to set "Maximum Performance" in the Power Management tab under Wifi Settings. Not doing this leads to instable or even "fake" connections: windows says you're connected but no data traffic occur This is the only workaround I know, any other suggestion is super-welcome!
Cheers

Related

How to force wifi when available?

Ok, this was working fine on the original AT&T ROM, but since I flashed to dutty's ROM, I cant get it to work. How do I force the phone to use wifi for net access when wifi is turned on, as opposed to medianet? Currently, I have to keep manually switching from medianet to "my work connection" in connection settings.
You can use Kaiser Tweak to set it to disconnect the GPRS connection after a set amount of minutes of inactivity. Then, when you enable WiFi, it should connect ONLY to WiFi.
I think the OP needs to sort out his "work" and his "internet" instead of just trying to turn off radio data.
I have medianet set to internet and my wifi set to work...not really clear what "work" is....just want to automatically use wifi when wifi is connected, and cant find the option to do that.
Anybody???
I did set both connections to "work".
Additionally I added my tmobile gprs connection to the work profile.
All seems to work great.
I can acces my network shares over wifi and connect to the internet. When no wifi is available it connects via gprs.
I keep getting confused on this same issue. i installed the same rom we are talking about. it shows up for me when setting up email accounts. with my wifi turned on, it still tries to go out the 3g connection. I want it to use wifi if that is what is turned on and i think that was working on the death star rom. For the drop down that says "The Internet" I basically want that to point to wifi if on then fall back to 3g. How do we do that?
It should not be named "work".
So whats the solution here?
Under Connections....Select which networks are automatically used:
Programs that connect to the internet should connect using ???
I can either choose Medianet or my work network, I'd like for it to use wifi when available, how is this done?
Programs that connect to a private network should connect using ???
I have this set to my work network.
Easy Solution to 'Auto Wifi"
Buy an Iphone, works seemlessly, and you get a browser too which works, something these HTC phones havn't had in 3 years.
The easiest way to force wifi (since gprs can be acting as a ***** ), is to keep wlan enabled and to install the NOGPRS.cab (aka the modaco nodata plugin) which allows you to disable (but keep) the gprs settings and which you can toggle on (and back off) when needed.
Great little app, saves much annoyance!
Is there an easy way to toggle wi-fi on/off, that can be assigned to an icon or button? At the moment I have to open Comm Manager each time and do it from there.
Rob F

Change Wifi/3HG Internet connections

Hi i configured the wifi connection for my home and it's all ok
then i have with my phone company (3g Italy) internet connection included in subscription
but i want know what i set to change automatically the internet connection on the 3G when the wifi is not available.
Regards
Francesco
When no wifi connection is available, it should automatically revert to either 2g or 3g connection (whichever is available). If this doesn't work automatically, you can consider downloading and purchasing commmgrpro (www.commmgrpro.com) and using it to either turn wifi on when you are in a specific cel area (or time of day), or prioritize your data connections manually. There are lots of other features to this program - I find it indispensible.
Good luck.
RK

Auto-switch WiFi/EDGE/GPRS

Hi2all!
I have Diamond 1.93 ROM, and i am using WiFi @ home & work.
But on other places i must use EDGE or GPRS (no 3G networks).
Question is simple - each time i want to use EDGE i need to go into settings -> connections and set that programs using internet should use "this" connection.
How to "teach" my diamond to switch automaticaly i.e when wifi connected - use wifi for internet, otherwise - edge.
Thanks for replies!
If Wifi (or wired ActiveSync connection) is already connected, it will be used for Internet. If not, the device will try to etablish an Edge or GPRS or UMTS connection.
If you don't want the tool to automatically connect to EDGE etc. use nodata.cab (search here in this forum) to disable / enable the connections when needed / not needed.
What I'm still searching for, is a solution to somehow priorize the available connections. Like first try to find an open WLAN and only if there's no WLAN available then ASK to open a mobile connection. Mobile data connections are still expensive for most of us and so the automatical attachment is bad. On the other hand, keeping Wifi always open consumes to much battery.

WiFi & 3G Connections

Hi,
Is it possible to make my HTC diamond attempt to connect to the internet through my Home WiFi connection before it connects via 3G.
Basically I want WiFi to be default and only to use 3G whilst i'm roaming about.
Cheers
John
If you turn your wifi on and set it up for your home network. then as long as the wifi is still on, it defaults to using that first. If your not at home just shut the wifi off
It's not perfect, but I haven't seen any other methods out there.
MoDaCo's NoData is what you need:
http://www.modaco.com/content/pocket-pc-software/246171/new-free-utility-nodata/
I have question about WiFi. Every time I turn off display (or turn off itself automaticaly), it disconnect from network but when I´m on ICQ then I cant recieve any message. Is possible to be connected permanently?

Turn off WiFi "For Real"?

Long version:
-I am running a media server for my family (as well as NAS/printer/etc sharing) so I need an internet connection and WiFi on the server at all times.
-I live in an area where the internet is.... unreliable... going out for 15+ minutes on a near-monthly basis, and for shorter periods every few days.
-When I am in one of these long outages (and since nobody can use the internet they all want to watch content on the media server, which for some reason requires an internet connection to stream over the local network) I was planning to just USB/BT tether my Note9 to the server until the outage ended...
But...
Every time I tether it, in less than 15 minutes, often less than 5, despite me toggling WiFi to "Off" the phone has decided to turn wifi back on and reconnect to the network with no internet connection, terminating my cellular data session. WiFi tethering is not an option since I need the server to remain on the wifi network to serve media to... cantankerous... retired senior citizens who refuse to learn to download media themselves for offline viewing......
Tl;Dr:
How can I force the Note9 to stay on mobile data and not reconnect to WiFi untill I tell it to? (being a note9 it is, of course, Stock and un-rootable)
Try with mobile data always active under Developer options
Could be this setting in connection
Wi fi
Advanced
paul_59 said:
Could be this setting in connection
Wi fi
Advanced
Click to expand...
Click to collapse
That's the one! Also change location settings so that it doesn't use wifi for location tracking, because that will also turn on wifi if it's set to use the chip.
Thank you, I didn't realize that the Note9 actually kept track of where I use Wifi like that - when the wifi works that's actually a great feature to save battery when I'm away from home/work (I'll have to see if there's a program to make a quick-toggle)

Categories

Resources