Change Wifi/3HG Internet connections - Tilt, TyTN II, MDA Vario III General

Hi i configured the wifi connection for my home and it's all ok
then i have with my phone company (3g Italy) internet connection included in subscription
but i want know what i set to change automatically the internet connection on the 3G when the wifi is not available.
Regards
Francesco

When no wifi connection is available, it should automatically revert to either 2g or 3g connection (whichever is available). If this doesn't work automatically, you can consider downloading and purchasing commmgrpro (www.commmgrpro.com) and using it to either turn wifi on when you are in a specific cel area (or time of day), or prioritize your data connections manually. There are lots of other features to this program - I find it indispensible.
Good luck.
RK

Related

How to force wifi when available?

Ok, this was working fine on the original AT&T ROM, but since I flashed to dutty's ROM, I cant get it to work. How do I force the phone to use wifi for net access when wifi is turned on, as opposed to medianet? Currently, I have to keep manually switching from medianet to "my work connection" in connection settings.
You can use Kaiser Tweak to set it to disconnect the GPRS connection after a set amount of minutes of inactivity. Then, when you enable WiFi, it should connect ONLY to WiFi.
I think the OP needs to sort out his "work" and his "internet" instead of just trying to turn off radio data.
I have medianet set to internet and my wifi set to work...not really clear what "work" is....just want to automatically use wifi when wifi is connected, and cant find the option to do that.
Anybody???
I did set both connections to "work".
Additionally I added my tmobile gprs connection to the work profile.
All seems to work great.
I can acces my network shares over wifi and connect to the internet. When no wifi is available it connects via gprs.
I keep getting confused on this same issue. i installed the same rom we are talking about. it shows up for me when setting up email accounts. with my wifi turned on, it still tries to go out the 3g connection. I want it to use wifi if that is what is turned on and i think that was working on the death star rom. For the drop down that says "The Internet" I basically want that to point to wifi if on then fall back to 3g. How do we do that?
It should not be named "work".
So whats the solution here?
Under Connections....Select which networks are automatically used:
Programs that connect to the internet should connect using ???
I can either choose Medianet or my work network, I'd like for it to use wifi when available, how is this done?
Programs that connect to a private network should connect using ???
I have this set to my work network.
Easy Solution to 'Auto Wifi"
Buy an Iphone, works seemlessly, and you get a browser too which works, something these HTC phones havn't had in 3 years.
The easiest way to force wifi (since gprs can be acting as a ***** ), is to keep wlan enabled and to install the NOGPRS.cab (aka the modaco nodata plugin) which allows you to disable (but keep) the gprs settings and which you can toggle on (and back off) when needed.
Great little app, saves much annoyance!
Is there an easy way to toggle wi-fi on/off, that can be assigned to an icon or button? At the moment I have to open Comm Manager each time and do it from there.
Rob F

local network and 3g

every time i try to go to my shared folders on my pc (local network) my htc is trying to enable 3g or gprs connection. it looks like i can't browse my local network using wifi but internet works great.
every time i connect to wifi i turn wifi on and 3g off
could u tell me what am i doin wrong?
is there any way to browse my lan using wifi connection?
am i missing an extra software?
thanks in advance.
anyone...
please...
settings>connections>connections>advanced>pick network
pick my network setting or what ever the name the non my isp setting
have on your device
is what i do when i want to make sure my pda use the bluetooth connection rather then cellphone
thank U...

Email Sync over WiFi/GPRS strange issue/experience

Hi all,
Got a stange issue. I have the MDAcIV (basically a diamond) on the UK T-Mobile contract.
I've setup my Gmail account to send/retrieve and over wifi it works perfectly, however if I disable my wifi connection, I expect the email to sync over GPRS, but I keep getting a sync error saying check your connections etc.
Anyway checked all my connections and it works fine over GPRS in browser, weather, and any other app requiring internet connection, just not email.
Gone through the email settings and under advanced server settings, under Network Connection it's set to "The Internet".
If I change this to "T-Mobile Internet", and then try to sync with wifi OFF, the GPRS kicks in and starts syncing.
I then stopped the GPRS connection, switched on wifi, and tried to sync again, but instead of using the connected wifi, it starts a GPRS connection.
Strange!
So in summary:
Network Connection: The Internet
WiFi OFF
GPRS ON
Sync fails over GPRS​
Network Connection: T-Mobile Internet
WiFi ON
GPRS OFF
Syncs over GPRS instead of existing wifi connection​
Anyone else have similar experience?
Thanks
I got a similar one:
I'm using Active Sync via HSDPA/GPRS to get my mails pushed (Exchange 2007 Server). Works like a charm and never have problems with it; used it for years with other WiMo devices.
Now, since I have my diamond (MDAc4 also) I can finally use WiFi, too. What I now experience is:
When I turn on Wifi, my cellular connection (HSDPA) stays active and when I turn it off manually via the comm manager it also turns off "PushMail" in comm manager. That basically sets active sync to "manual" instead of "when items arrive".
Though I am able to turn on push mail in comm manager again, as soon as an email arrives it starts to connect HSDPA again.
So basically I can not use wifi to save some MB of my data plan when I want to continue to get my emails. And this really sucks...
Only thing I can set up in the advanced connections in Active Sync is "Connection" where my only option is "Internet" -.- Meaning I can not differ between cellular and wifi. It kinda has to use the cellular connection...
long story short, dunno if that helps you with your problem now, sorry; but if anyone understands what I am talking about right here, maybe send me a pm or something, if you know how to fix that.
Network Connection: T-Mobile Internet
WiFi ON
GPRS OFF
Syncs over GPRS instead of existing wifi connection
Click to expand...
Click to collapse
Definitely had this happen a fair few times, with the gprs failing to connect once or twice, and I've seen it on most of the roms.
I think WM doesn't set it's connection type correctly, so we don't get the seamless "use the best/cheapest/fastest connection available"
In fact, anyone know of any app that would just do that? As in try to connect to unsecured or secured wifi, followed by 3G/HSDPA, followed by GPRS?
patelr said:
Network Connection: The Internet
WiFi OFF
GPRS ON
Sync fails over GPRS​
Network Connection: T-Mobile Internet
WiFi ON
GPRS OFF
Syncs over GPRS instead of existing wifi connection​
Anyone else have similar experience?
Click to expand...
Click to collapse
I have exactly the same problem. If I want to get my e-mail the account setting has to be "T-Mobile Internet" unless I'm using wi-fi in which case I have to switch it to be "The Internet". Anyone know of a solution?
Is it possible that T-mobile are forcing you to use your Data connection rather than free Wifi ?
Hmmm nerf maybe?
TJ72 said:
Is it possible that T-mobile are forcing you to use your Data connection rather than free Wifi ?
Hmmm nerf maybe?
Click to expand...
Click to collapse
Thanks for the reply. It could be but the phone doesn't even attempt to connect to mobile data it just pops up an error to say it can't connect with the existing data settings. Its not a T-mobile supplied handset although it did configure itself to use T-Mobile when I first put the SIM in.
Solution
After research and research I´ve finally found a solution. I´ll post some pictures of my settings so you can see yourself what you have to do.
The clou is to have only 1 connection for Wifi and GPRS/3G. WM now firstly checks if there is a Wifi connection and if not, it will connect to GPRS.
Got It
Just untick the box that says "This network uses a proxy server to connect to the internet" in the manage t-mobile Internet connections app.
Now works over Wifi if available, if not uses GPRS/3G

Auto-switch WiFi/EDGE/GPRS

Hi2all!
I have Diamond 1.93 ROM, and i am using WiFi @ home & work.
But on other places i must use EDGE or GPRS (no 3G networks).
Question is simple - each time i want to use EDGE i need to go into settings -> connections and set that programs using internet should use "this" connection.
How to "teach" my diamond to switch automaticaly i.e when wifi connected - use wifi for internet, otherwise - edge.
Thanks for replies!
If Wifi (or wired ActiveSync connection) is already connected, it will be used for Internet. If not, the device will try to etablish an Edge or GPRS or UMTS connection.
If you don't want the tool to automatically connect to EDGE etc. use nodata.cab (search here in this forum) to disable / enable the connections when needed / not needed.
What I'm still searching for, is a solution to somehow priorize the available connections. Like first try to find an open WLAN and only if there's no WLAN available then ASK to open a mobile connection. Mobile data connections are still expensive for most of us and so the automatical attachment is bad. On the other hand, keeping Wifi always open consumes to much battery.

WIFI

Morning all,
I just got a touch diamond2, this is my first fone with wifi. a couple of questions!
when i'm at home or whereever and connect through wifi this has no impact on download limits within my fone contract?
Does the fone automatically no to use wifi for the internet connection when one is connected?
my fone doesn't stay connected to my home network, it finds it and connects ok but then a min or so later it says 'not connected, networks available'?
any help appreciated
Cheers
Gazza
Hi,
Using WiFi connections at home will not contribute to your mobile data plan. Wi-Fi data does not go over the cellular networks, and therefore is not part of your contract plan. This also means that you can use VoIP, streaming video, and other services over Wi-Fi, whereas you may not be able to over your mobile data plan.
The phone will not switch automatically between Mobile Data and Wi-Fi. You would need to close the Mobile Data connection, and re-start with Wi-Fi every time you wanted to switch.
Your mobile phone WiFi connection may be entering a power-saving mode when idle; To disable this, download the Advanced Config Tool http://forum.xda-developers.com/showthread.php?t=418151 and install it. Open the Advanced Config Tool and look for the Network settings. The bottom two options should be "Turn off Wi-Fi if no activity" and "Wi-Fi Auto off timeout" Change these as appropriate.
Hope this helps!
Hi, here are my answers based on my experience:
1) When connected to a WiFi network (eg. home, work,school etc) your phone operator is not in the position to charge you anything.You'll be charged only if using your operator GPRS,3g etc services. If you want to avoid Operator connections use Nodata.cab or make the right settings in Advanced config or HD Tweak.
2) Once Wifi connection established, it should have the priority on other data connections.
3) Wifi connection stability depends on radio and ROM you're using, my solution is to to set "Maximum Performance" in the Power Management tab under Wifi Settings. Not doing this leads to instable or even "fake" connections: windows says you're connected but no data traffic occur This is the only workaround I know, any other suggestion is super-welcome!
Cheers

Categories

Resources