hi,
i bought 8925 from ebay and got the correct unlocking code but can not input the code becaused hang up in pleased wait mode for almost 7 days it ....is there a solution for this problem .....
thanks in advanced
ferds
Try here.
Hope that helps, oh and welcome aboard.
WillardZ said:
Try here.
Hope that helps, oh and welcome aboard.
Click to expand...
Click to collapse
Let's give the right thread...to unlock he needs to go here first:
http://forum.xda-developers.com/showthread.php?t=361039&highlight=jockey+sim+unlock
Then:
http://forum.xda-developers.com/showthread.php?t=433835
The link above is for hard spls...which you will get if you follow the threads I posted but you don't do that first or you won't be able to unlock the phone.
parleyp said:
Let's give the right thread...to unlock he needs to go here first:
http://forum.xda-developers.com/showthread.php?t=361039&highlight=jockey+sim+unlock
Then:
http://forum.xda-developers.com/showthread.php?t=433835
The link above is for hard spls...which you will get if you follow the threads I posted but you don't do that first or you won't be able to unlock the phone.
Click to expand...
Click to collapse
This process is to get unlocking code ....code is already on hand but can not input ..bec its been try how many times ...and lock up in pleased wait mode....
thanks for looking the problem
I think what parleyp is trying to say is that wherever you got (bought?) your unlock code from, you don't necessarily need it. If you follow the links in his post there is a free method to unlock without a code - this is also permanent unlike the some unlock codes which you buy.
If your phone still hangs then I'd suggest a hard reset and then try parleyps links to unlock, then WillardZ link to hardSPL your phone - after this you are safe to try any roms and use any carrier.
ach2 said:
I think what parleyp is trying to say is that wherever you got (bought?) your unlock code from, you don't necessarily need it. If you follow the links in his post there is a free method to unlock without a code - this is also permanent unlike the some unlock codes which you buy.
If your phone still hangs then I'd suggest a hard reset and then try parleyps links to unlock, then WillardZ link to hardSPL your phone - after this you are safe to try any roms and use any carrier.
Click to expand...
Click to collapse
This is exactly what I am suggesting. Don't sweat it. Waiting for 7 days means it didn't work. Follow the steps above and do it for free and now. Just follow all the directions carefully.
hi,
i will try again tomorrow its already 3 a.m central time and post result here ..hope somebody will come up for simple bypass the waiting mode ...so that i can input my code quick and easy as.....123
thanks
hi,
done with olip
thanks
Related
hello
i'm trying to jailbreak my phone but i recevive the error that chevron doesn't see the phone connected or zune opened...
first when i push "unlock" chevron crashed, but next i remove the "only read" tick from driver (and all files in) and i'm arrived at the problem on top of post
i've XP and windows developer tool installed
First:
http://forum.xda-developers.com/showthread.php?t=914596
Then:
http://forum.xda-developers.com/showthread.php?t=915382&highlight=guest+relationship
Hope this will help and found it using search engine here
Don't forget to hit thanks if this was of any use for you.
jemaho said:
First:
http://forum.xda-developers.com/showthread.php?t=914596
Then:
http://forum.xda-developers.com/showthread.php?t=915382&highlight=guest+relationship
Hope this will help and found it using search engine here
Don't forget to hit thanks if this was of any use for you.
Click to expand...
Click to collapse
thank but for the first i resolved yet.
fore the second i don't understand where is my solution. they've my problem
My recommendation would be to follow this thread: http://forum.xda-developers.com/showthread.php?t=857127
There are a number of people who, for a reason that no one has yet to be able to reliably figure out, just can't unlock their phones anymore. You may be one of them, so I would suggest reading and following that thread for possible solutions or a future fix.
prjkthack said:
My recommendation would be to follow this thread: http://forum.xda-developers.com/showthread.php?t=857127
There are a number of people who, for a reason that no one has yet to be able to reliably figure out, just can't unlock their phones anymore. You may be one of them, so I would suggest reading and following that thread for possible solutions or a future fix.
Click to expand...
Click to collapse
i've just made the update of wp7.
that's the reason why i can't unlock the phone?
Sorry got another question is there another all in one tool that will unlock bootloader and work on software versions that are not EURxxx because im worried that ill brick my phone imputing commands manually
afrolong said:
Sorry got another question is there another all in one tool that will unlock bootloader and work on software versions that are not EURxxx because im worried that ill brick my phone imputing commands manually
Click to expand...
Click to collapse
When @Omario-242 helped you before you didn't press the 'Thanks' button - which is common courtesy when someone helps you.
You really need to learn to search and read before asking basic questions as anything you ask is likely to have been asked at least 10 times before.
I'll start by putting your mind at rest on one thing - you cannot brick this phone. So, if you don't read properly and understand what you are doing, the worst you will have to do is flash a .kdz file to recover (as a hint, look this stuff up so you know what to do if you do screw-up).
So i think i may have bricked my Atrix HD it has a locked bootloader form att............ i hooked it up to mythtools and i think i messed it up,no charge no light turning on and computer is recognizing it as QHSUSB..... i was thinking u cant brick a phone unless its unlocked?....PLEASE HELP ME....just got new battery
devilsking said:
WARNING: BESURE YOU ARE UNLOCKED BOOTLOADER BEFORE FLASHING/DOWNGRADING FIRMWARE!
It's nearly 11 months since the last update v1.2. Now I will introduce the new version of Myth Tools with a big improvement.
Thanks to all your comments which helps me to complete the features of Myth Tools. All feedbacks are always welcome.
Please read instruction carefully before using. Thank you.
BR,
DK
Click to expand...
Click to collapse
@chachagurl05
I am not very familiar with Myth Tools but my #1 rule when it comes to XDA is "Read Everything" and this is the very first thing on their thread, it says, "BE SURE YOU ARE UNLOCKED BOOTLOADER BEFORE FLASHING..." -- It really can't be much more explicit than that.
With regards to saving your device, my recommendation would be to try to unlock your bootloader if you still can. If you're able to boot to the bootloader (from powered-off state hold down power+vol up+vol down) then you may be able to salvage the device. Make sure you read all of the instructions that come with the unlocking tool because when it comes to these types of tools, it is very important that you educate yourself before you go and fiddle around with the software because if you don't know what you're doing, it's very easy to end up with a brick on your hands. I'm very sorry that you had to learn that the hard way (we've all been there) but I'm sure it will be a valuable lesson that you take with you for next time. Here is the link to the bootloader unlocking tool: http://forum.xda-developers.com/showthread.php?t=2226504
Feel free to PM me if you need help and I will do my best to answer any questions that you have, or you can ask your questions right here in this thread!
sparkplugDev said:
@chachagurl05
I am not very familiar with Myth Tools but my #1 rule when it comes to XDA is "Read Everything" and this is the very first thing on their thread, it says, "BE SURE YOU ARE UNLOCKED BOOTLOADER BEFORE FLASHING..." -- It really can't be much more explicit than that.
With regards to saving your device, my recommendation would be to try to unlock your bootloader if you still can. If you're able to boot to the bootloader (from powered-off state hold down power+vol up+vol down) then you may be able to salvage the device. Make sure you read all of the instructions that come with the unlocking tool because when it comes to these types of tools, it is very important that you educate yourself before you go and fiddle around with the software because if you don't know what you're doing, it's very easy to end up with a brick on your hands. I'm very sorry that you had to learn that the hard way (we've all been there) but I'm sure it will be a valuable lesson that you take with you for next time. Here is the link to the bootloader unlocking tool: http://forum.xda-developers.com/showthread.php?t=2226504
Feel free to PM me if you need help and I will do my best to answer any questions that you have, or you can ask your questions right here in this thread!
Click to expand...
Click to collapse
Thanks for your response yea i totally get it . The phone came on now its in sticky bit and its still locked . once again thank you for responding YOUR THE BEST DOLLFACE:victory: now just to figure out how to get this bad boy running...
sparkplugDev said:
@chachagurl05
I am not very familiar with Myth Tools but my #1 rule when it comes to XDA is "Read Everything" and this is the very first thing on their thread, it says, "BE SURE YOU ARE UNLOCKED BOOTLOADER BEFORE FLASHING..." -- It really can't be much more explicit than that.
With regards to saving your device, my recommendation would be to try to unlock your bootloader if you still can. If you're able to boot to the bootloader (from powered-off state hold down power+vol up+vol down) then you may be able to salvage the device. Make sure you read all of the instructions that come with the unlocking tool because when it comes to these types of tools, it is very important that you educate yourself before you go and fiddle around with the software because if you don't know what you're doing, it's very easy to end up with a brick on your hands. I'm very sorry that you had to learn that the hard way (we've all been there) but I'm sure it will be a valuable lesson that you take with you for next time. Here is the link to the bootloader unlocking tool: http://forum.xda-developers.com/showthread.php?t=2226504
Feel free to PM me if you need help and I will do my best to answer any questions that you have, or you can ask your questions right here in this thread!
Click to expand...
Click to collapse
Nice explaination :good:
devilsking said:
Nice explaination :good:
Click to expand...
Click to collapse
Totally agree!!
Hey Guys
I recently bought an s10 from eBay the selller Said ist factory resteted nur now there is frp flashing the Combination is Impossible because of pit. I read that in this Case its only possibile with a flash token. Ist there anyone who can give this token or is abble to disable frp. (If youre try to unlock the device ist successfully i can give you some Money)
Direct Massage me and than i will give you some more informations about the device. There we can talk about the Money and how It will get to you.
Thank you dir youre Attention
Flashing /system to remove reactiviation lock
Reactivation lock is activated when the device was reset while wiped via either ADB or Recovery (likely either you or the seller stole it). You will need to flash the newest firmware for your device & carrier using Odin. You can usually find these on SamMobile if it isnt avaliable anywhere else. After its reflashed setup the device without a internet or sim card installed. If y oku have any trouble using Odin there are plenty of tutorials on it avaliable online.
MrPoBot said:
Reactivation lock is activated when the device was reset while wiped via either ADB or Recovery (likely either you or the seller stole it). You will need to flash the newest firmware for your device & carrier using Odin. You can usually find these on SamMobile if it isnt avaliable anywhere else. After its reflashed setup the device without a internet or sim card installed. If y oku have any trouble using Odin there are plenty of tutorials on it avaliable online.
Click to expand...
Click to collapse
I already tried that but even tough after falshing the newest firmware there is still frp.
Gaulismus said:
I already tried that but even tough after falshing the newest firmware there is still frp.
Click to expand...
Click to collapse
it will stay FRP'd until you flash combination firmware
Gaulismus said:
Hey Guys
I recently bought an s10 from eBay the selller Said ist factory resteted nur now there is frp flashing the Combination is Impossible because of pit. I read that in this Case its only possibile with a flash token. Ist there anyone who can give this token or is abble to disable frp. (If youre try to unlock the device ist successfully i can give you some Money)
Direct Massage me and than i will give you some more informations about the device. There we can talk about the Money and how It will get to you.
Thank you dir youre Attention
Click to expand...
Click to collapse
I can give you some advice. You can contact me in private but for frp unlock you will need a locked sim card , a sim pin and a lot of patience.
SAMPPLE said:
I can give you some advice. You can contact me in private but for frp unlock you will need a locked sim card , a sim pin and a lot of patience.
Click to expand...
Click to collapse
good luck with that method, i hevent heard of anyone getting that to work in almost a year.
completely non-related side note: i cant wait to land in Bucharest in a few months and visit your beautiful country again!!
Youdoofus said:
good luck with that method, i hevent heard of anyone getting that to work in almost a year.
completely non-related side note: i cant wait to land in Bucharest in a few months and visit your beautiful country again!!
Click to expand...
Click to collapse
Thank you !
The method works flawless: https://www.youtube.com/watch?v=UM_d0yoOEMk&t=145s I use it every time when I get some phones with november security patch
SAMPPLE said:
Thank you !
The method works flawless: https://www.youtube.com/watch?v=UM_d0yoOEMk&t=145s I use it every time when I get some phones with november security patch
Click to expand...
Click to collapse
awesome! im glad that its still a viable method!
also, there is going to be a shortage of mici as soon as i land in Romania! Better stock up before i arrive!!
Youdoofus said:
awesome! im glad that its still a viable method!
also, there is going to be a shortage of mici as soon as i land in Romania! Better stock up before i arrive!!
Click to expand...
Click to collapse
Dude you are so cool! Love you
SAMPPLE said:
Dude you are so cool! Love you
Click to expand...
Click to collapse
multimesc frumos!! (because XDA rules state that we must post in english, this translates to "thanks a ton!!")
So, ive been on the Transfagarasan, the Transraraul, Sibiu, Brasov, Sigisuara, Castle Bran, Lacul Rosu (The Red Lake) and a few other treasures! We didnt get a chance to make it to Iasi either time yet despite its proximity to Piatra Neamt, which is where we call our home base. I am honestly curious to get your perspective on what are some of the best things to do/see in Romania. Doesnt have to be something like the people palace, i like real stuff. Restaurants that make the best ciorba(soup) and mancare(stew) or just a relaxing lakeside getaway. Do you have any places you think a goofball American might like?
Here you go:
https://forum.xda-developers.com/galaxy-s10/themes/frp-bypass-samsung-s10-100-t4066211
This unlocking method was researched by myself, so I bought two machines to study it.
I know that many Chinese can unlock the Bootloader, but they are unwilling to announce it.
They charge high unlock fees to unlock for users in need. This is shameful,I don't like selfish Chinese people.
so I plan to publish it directly.
Let all users have the right to choose whether to unlock, I hope you like it.
How to use it?
Both BlaskShark 3/3Pro and 3S can use this file to unlock the Bootloader.
No need to pay high fees to unlock.
Enter the edl mode method 1: when the phone is off, press and hold the volume up and down keys at the same time,
insert the USB cable to connect to the computer to enter the edl mode.
Entering edl mode Method 2: Turn on usb debugging on the phone, and run adb.exe reboot edl in cmd to enter edl mode.
and use the miflash tools to flash unlockfiles.
Then enter fastboot mode, run UnlockBL.bat to unlock your phone.
Enjoy it！
Download link:
mega.nz/file/fFMgDSzS#zc6_mOGJaLPUwO20IqfZMENJExuTaVRhpYhirsu4Xfw
Blackshark 3/3Pro TWRP download link:
mega.nz/folder/KU8DTZhR#M2YjCHUrmupBkovTam2HtQ
Blackshark 3 KLE-H0 global beta rom download link:
mega.nz/file/rc9EQaQK#0pEu0S95u0DIzO9lCLSl9_wVArc1YUbDN6iIE5elrD4
Blackshark 3 Pro MBU-H0 global rom download link:
mega.nz/file/vVUiTS5A#hOts3JROqqvWAdPKjvp_YqQ0I45av4CH4o26pFJAs84
Unlocking the Bootloader through this method may cause the fingerprint to be lost,
and it needs to be recalibrated before it can be used.
Fingerprint calibration tutorial
Enter *#*#466349#*#* on the dial keypad
Will jump to the fingerprint calibration interface,
Then click 售后校准, you will be prompted to Put the FLASH FLA then click START.
Click Start first, and then immediately press your thumb on the fingerprint module, keeping the phone from moving.
Wait for this step to be complete, then it will prompt Put the black FLAT
You can use black things, or wrap your thumb in black clothes, and then press and hold the fingerprint module.
Then wait for the calibration to complete
The fingerprint module must be completely covered during the calibration process, otherwise the unlock rate will decrease
After success, restart the phone to re-enter the fingerprint and use the fingerprint to unlock.
Thanks for sharing
https://mega.nz/file/TMtj2SJS#7hylBi9HjgA-iR-GQ81-6LoG9bjvI7tfmSdfBqK2pdM
John Eveline said:
This unlocking method was researched by myself, so I bought two machines to study it.
I know that many Chinese can unlock the Bootloader, but they are unwilling to announce it.
They charge high unlock fees to unlock for users in need. This is shameful,I don't like selfish Chinese people.
so I plan to publish it directly.
Let all users have the right to choose whether to unlock, I hope you like it.
How to use it?
The phone enters the edl mode, and use the miflash tools to flash unlockfiles.
Then enter fastboot mode, run UnlockBL.bat to unlock your phone.
Enjoy it！
Download link:mega.nz/file/TMtj2SJS#7hylBi9HjgA-iR-GQ81-6LoG9bjvI7tfmSdfBqK2pdM
password：bs3ublfiles
Click to expand...
Click to collapse
good sharing. hope someone will tested it.
i have already paid the china man tho to unlock. but only on DPX beta rom. doyou hae the MP1 stable rom bro?
I will update the files
hope someone test this... thanks sir
Now it works like a charm
bouyhy01 said:
Now it works like a charm
Click to expand...
Click to collapse
is there a proof? did you document the procedure?
takoyaki17 said:
is there a proof? did you document the procedure?
Click to expand...
Click to collapse
Proof? The guy did us a favor. It works. Thanks OP.
bs3pro said:
Proof? The guy did us a favor. It works. Thanks OP.
Click to expand...
Click to collapse
yes.i need someone to verify that it is working. i'm thankful for OP's effort by the way.
takoyaki17 said:
yes.i need someone to verify that it is working. i'm thankful for OP's effort by the way.
Click to expand...
Click to collapse
It works
bs3pro said:
It works
Click to expand...
Click to collapse
i'll wait for someone to prove it.not just by saying it.black shark has no dev support.so we can't unbrick this phone if something bad happen while doing this. thanks anyway.
I didn't realize everyone needs their hand held. It's called hacking for a reason. This bl unlock couldn't be easier.
So Im VERY new to this. Does this give me the global rom? Also do I need to backup my phone before? The phone is great but the issues with push notifications for certain apps on the Chinese Rom is just a pain in the butt.
Also Im on the bs3 12gb ram 128gb storage is there any different steps I need to take?
lostpunkrock said:
So Im VERY new to this. Does this give me the global rom? Also do I need to backup my phone before? The phone is great but the issues with push notifications for certain apps on the Chinese Rom is just a pain in the butt.
Also Im on the bs3 12gb ram 128gb storage is there any different steps I need to take?
Click to expand...
Click to collapse
No, no rom included. All it does is unlock your BL. It will wipe the device too.
takoyaki17 said:
i'll wait for someone to prove it.not just by saying it.black shark has no dev support.so we can't unbrick this phone if something bad happen while doing this. thanks anyway.
Click to expand...
Click to collapse
Nothing will brick man its just a file that patch the rsa keys blackshark’s servers verification when trying unlocking with the usual unlock commands and it unlocks a bootloader adb interface then you run the bat file and voila
bouyhy01 said:
Nothing will brick man its just a file that patch the rsa keys blackshark’s servers verification when trying unlocking with the usual unlock commands and it unlocks a bootloader adb interface then you run the bat file and voila
Click to expand...
Click to collapse
i see. thanks
have you tried it?
Can anyone post photo proof that this works? Like an image of the bootloader screen and a screenshot of Developer Options?
takoyaki17 said:
i see. thanks
have you tried it?
Click to expand...
Click to collapse
Someone told me he did ,unfortunately i dont have the device
bouyhy01 said:
Someone told me he did ,unfortunately i dont have the device
Click to expand...
Click to collapse
thanks.. i will wait for someone to try this first.
bs3pro said:
No, no rom included. All it does is unlock your BL. It will wipe the device too.
Click to expand...
Click to collapse
Cool well I guess I will wait until the global rom appears somewhere. Need to change over because this not being able to use whatsapp properly is driving me mad.
Cant afford to pay to do it for a while so hoping it shows up online so i can do it myself.