I upgraded to WM 6.1 yesterday and have been slowing adding all the software bits and pieces to it since.
I installed FTouchFlo 1.4.1 yesterday. About half an hour ago I accidentally installed FTouchFlo 1.4. The phone froze up right after it installed. I turned it off and on again (several times) and it won't go past the WM 6.1 boot up screen.
Help. I've no idea how to fix this.
Thanks,
Andrew
Edit: 10th times the charm it seems. It's finally booted up for me. Anyone know what may have happened? Should I totally uninstall FTouchFlo and start from scratch?
New problem. The touch screen won't work now.
Bacchus3891 said:
I upgraded to WM 6.1 yesterday and have been slowing adding all the software bits and pieces to it since.
I installed FTouchFlo 1.4.1 yesterday. About half an hour ago I accidentally installed FTouchFlo 1.4. The phone froze up right after it installed. I turned it off and on again (several times) and it won't go past the WM 6.1 boot up screen.
Help. I've no idea how to fix this.
Thanks,
Andrew
Edit: 10th times the charm it seems. It's finally booted up for me. Anyone know what may have happened? Should I totally uninstall FTouchFlo and start from scratch?
New problem. The touch screen won't work now.
Click to expand...
Click to collapse
You are going to need to hard reset! Sorry!
Hey,
Thanks for the reply. I've been busy over the New Years so I've only gotten back to fixing my phone now.
At the moment, the only problem it's giving me is that it is unresponsive (touch screen and buttons) half of the time. It'll work fine sometimes and then 5 minutes later it's a struggle to type anything on it or use the menus. Does this still need a hard reset or is there something else I can do?
Related
Ok so I'm having an issue with touch flo. I flashed the touch it 2.3 rom to my phone. The problem I'm running into is I can't scroll through my program files or file explorer with my finger. It was working then just stopped. So I did a hard reset and it started working again. After about an hour or so it stopped working again. So I thought it might be a program I installed that was messing it up. I did another hard reset and only installed a few basic programs. Now its not working again. Is there anything that I'm doing wrong? Any help would be nice. Thank you in advance.
Hi I actually have the same issue.
I upgraded for the 2.3 release and it worked liked a charm for a day or so, then all of a sudden it stopped working.
Also on my wing, when i hit the green send button, I normally expet the phone to dispay and its not even doing that anymore.
It just stays at the home screen, I have to go into my calls history so tha I can access my phone.
Any idea if anyone has had these issues, if you found out a way on how to fix it please let me know.
Hey there,
A bit new, just finished loading Duttys WM6.1.5.2.1972_Hybrid_V2_1_65.14.06[CubeV2] Rom. Seems great at first. Had to download Goodlink for the corporate stuff. It works fine for a bit, but as soon as an Outlook reminder pops up, suddenly the touch screen is completely dead. Tried all buttons etc on the front. The keyboard works and the buttons can be used as the menu choices, but it took a hard reset to fix it. Which then I had to reload Goodlink and it happened again.
Any patches or settings anyone can think of? Goodllink is the only add in I put in. Any other ROM's recommended perhaps? Thanks all!
Borg7of9 said:
Hey there,
A bit new, just finished loading Duttys WM6.1.5.2.1972_Hybrid_V2_1_65.14.06[CubeV2] Rom. Seems great at first. Had to download Goodlink for the corporate stuff. It works fine for a bit, but as soon as an Outlook reminder pops up, suddenly the touch screen is completely dead. Tried all buttons etc on the front. The keyboard works and the buttons can be used as the menu choices, but it took a hard reset to fix it. Which then I had to reload Goodlink and it happened again.
Any patches or settings anyone can think of? Goodllink is the only add in I put in. Any other ROM's recommended perhaps? Thanks all!
Click to expand...
Click to collapse
I notice this is your fisrt post so welcome. There is a great deal of helpful experience here to help but it does certainly pay to pose questions in the correct place. If you ever have a question about a ROM then post your question in that area and you will be far more likely to get the helpful anser that you want. People are also sometimes too quick to 'Flame' people making such errors - but not me so hopefully this will help:
I am on that same ROM and have noticed that after initial ROM installation that the touch screen is initially 'prone' to what appear to be freezes. In fact I noticed on my device that I had to press quite hard to get any interaction with the screen and sometimes it did not respond.
Cannot say why but this has now completely gone and did so with each ROM install. It took a few soft resets to see the screen working correctly but it is great now! So it may not be your additional software. Just try sticking with it for longer and some soft resets. You might also try tweaking the sensitivity of the screen.
Suggest you search within the correct area and you'll see few comments about this kind of thing (but not many).
Regards
Thanks Tony. My first time posting so wasnt sure where to put it. Have done all you suggested. Worse case, back to the ATT rom, oh well. Will search also and try posting in the right location. Thanks!
Borg7of9 said:
Thanks Tony. My first time posting so wasnt sure where to put it. Have done all you suggested. Worse case, back to the ATT rom, oh well. Will search also and try posting in the right location. Thanks!
Click to expand...
Click to collapse
i just reviewed the software online and i can make several predictions why this is conflicting with the rom. 1) htc home
go to settings>personal>today>items>and uncheck htc home.
let me know if goodlink works thereafter if not I have a few more predictions to why it doesn't operate correctly.
Oh, and i just noticed you had a cube version, which could also be conflicting.
Thanks for the input Red. Tried that to no avail. Even tried soft reset afterwards. It is dead before goodlink even starts. BTW, this will be worth a Pint or two if you get me working.
I thought it might be the Cube version so after several hard resets(storage clearing), I went ahead and flashed it with Dutty's Non Cube version just to see if that was it and it wasn't. I tried tuning the touch screen too, bumping sensitivity up to 200, didnt help either. Tried loading the tweaks program, but nothing there either helped(actually cant even use it when frozen). The keypad, buttons all work, but the touch screen is dead. Hard reset fixes it, loading Goodlink, which I have to have for its a corp phone, kills the touch screen. I believe it worked for a few minutes, then locked up. I need to reverify that just to make sure it didnt happen immediately with Goodlink install. Very strange.
I've had my Touch Diamond for nearly a year now and I've never really had that many issues until now.....
In the past month I have had to reset (ie return phone back to how it was when originally delivered) my phone 4 times !! And in every instance it's been because Touch Flo refuses to load.....
At first I thought it was because I was installing loads of [email protected] little applications etc, but I think it might be down to Microsoft my phone beta...... Although the program has helped me retrieve pretty much everything I needed to retrieve after each reset, it doesn't take long before it fails to sync and everything seems to go bad again.
Last night I tried un-installing the myphone beta app, and due to how slow everything runs when touch flo refuses to load I had to leave it over night...... By the time i got up in the morning it was un-installed and Touch Flo was running....
I re-booted my phone mid-morning today, and although Touch flo took around 5mins to load it did at least load, albeit with the following message...
cannot load \windows\myphoneruntime.exe which suggests it didn't fully install properly..... Anyway I decided to install a registry editor and see if i could find any rogue entries but I couldn't use the reg editor like i would on Windows XP for instance and so drew a blank.
To try and un-install my phone beta properly, I re-installed it and synced which went without a hitch. Then I rebooted my phone and again Touch Flo does not run.... So I'm almost certain something in this My Phone beta is a problem which is probably why its still in beta....
Just wondered if anyone else had similar problems / Issue's? And also if anyone can give me advice regarding the reg editor......
Thanks in advance....
I had a problem with touch flow not loading, it didn't start up wich caused my phone to refuse to do anything else, after a couple of minutes my screen went black(backlight shut off and phone went into standby) and i could only use soft reset to turn it on again.
I never got around solving it untill i just turned off touch flow in the today screen, installed spb shell 3.0 and now i never have any problems.
So other then tunring off touch flow i don't know what you could do.
I've had to reset my device..... I've failed in all attempts to try and correct it... So after resetting and NOT using Microsoft My Phone Beta to restore all my contacts, photo's, text's etc we'll see how long it lasts this time.
I'm not sure if it a freezing problem or it just won't accept any input
Basically after my Kaiser has been on charge overnight I will get around to using it and can't. What will happen is the screen & buttons will not work, although they can be used for a split second every 3 seconds.
After a reset everything is back to normal, so I'm not sure what the problem is, I don't have a lot of programs installed and only 1 has been install in the past month which is A2DP Today Toggle, so far I've un-installed it and left it again but I still have the problem.
Thanks for any help
I have a similar problem. In the morning i have to soft rest the phone for it to work. Issues started after 6.5 upgrade. There must a solution somewhere in here..........
Does a hard reset fix the problem? Does this happen with every ROM you've tried?
I have only stuck with the official rom, I bought it on 6.0 and then updated to 6.1 after it's release. A hard reset does fix it but some time after it will return, bear in mind this has never done it previously just about a month ago.
I guess it might be a issue with some program that is being installed
Hi guys,
I've got a bit of a problem with my friends X1...
A while ago I updated my X1 to WM6.5 and it works perfect...
But last week my friend asked me to update her phone as well, so I did
Now here's the problem:
After updating, the phone got stuck on loading, it didn't even get past the SE screen...
Turned it on and off for a couple of times, soft reset, hard reset, nothing worked...
I was still able to get the phone in the tri-colour screen, so I did, and I installed a stripped down version of WM6.5
And it worked!
But this afternoon she called me up to say that the phone was having problems again.
She often can't turn it on, and when she can it seems as if it has lost all of its memory again, comletely blank as if you just got it out of the box... (So you have to setup your screen again, the time and date etc...)
I did it exactly as id did mine, and mine still works perfect...
What could have gone wrong?
First I put Hard-SPL on the device.
Then I used the rom update utility from christian-web.nl/sections.php?section=Xperia_rom (I used version 3.810)
And thats it!
Does somebody have any idea what could be the problem?
Thanks,
Rob
A few days back I read somewhat of the same story, about the phone hard resetting by itself. Can't recall where, but it was somewhere in the Xperia section of this forum.
Did you do a hard reset after flash? Or maybe task29 before flashing her phone?
Try the hard reset first and see if that helps.