I'm currently running Juggalos rom. I don't like the stock Voice Command program so I installed Cyberon. Is there a way to get Cyberon to launch when pressing on my BT. It launches the Voice Command program(windows one)
I found instructions on doing the opposite for older HTC phones but cant find out how to do it this way..
Related
Couple of questions about voice-dialing in WM5.
I purchased MS Voice Command 1.5 and loved it on 2003SE, but:
1) Does it work with the latest WM5 ROMs?
2) Is there a way to initiate a command from a BT headset?
Not concerning MS VC:
3) What other options are available, and what are the best?
Thanks!
1. At the moment MS Voice Command 1.5 does not work in the new WM5 AKU ROMs (at least it didn't last time I tried!!)
Once you install the app it runs once then states there's been an error and refuses to run again!
2. Within WM2003SE if you have the A2DP profile set with your headset (assuming it's stereo?) then you can initiate a call/command via BT, I used it quite a bit...
3. Alternatives are the following:
Cyberon Voice Dialler (I don't like this as you have to record all the voice tags as there is no speech recognition engine.
VITO Voice2Go/VITO VoiceDialler (I liked this in its previous incarnation but haven't tried the new version with 2K3 or WM5)
If you search the forum for Voice Command you'll find plenty of threads about getting these apps working, and working with BT...
Thanks for the response. I'll search the forums and see if there is anything else that I can find.
FYI, I just have a headset that supports handsfree (Jabra JX 10).
I love cyberion voice commander just becaues it doesn't make all the voicetags itself. I think this is why the device is called a pda with the P for Personal, everyone his/her own opinion.
Since english is not my native language and voicecommander always want to make it sound as english it's not good for me.
And suggsjc i love your signature "If the world didn't suck, we would all fall off..." . I borrowed it several times now to friends of mine, interpreting it as a positive thought
Well I guess to each their own. I (P)ersonally liked it having all of the tags created for me. I could find a contact that I rarely used (and wouldn't have created a tag for) with just using voice commands. But having the choice is a good thing.
Despite the glitches with some software in WM5, overall I am very pleased. Much nicer and more refined than 2003SE.
Glad to hear that my sig is popular
MS Voice Command instead of Cyberon Voice Commander for AT&T Tilt with Alex's ROM?
Hi -
I have an AT&T Tilt, unlocked thanks to jocky, and running Alex's ROM (v5.HTC.181).
I'd like to replace the Cyberon Voice Commander which is in Alex's ROM with Microsoft Voice Command.
I *think* that the AT&T Tilt, by default, did have Microsoft Voice Command on it, which suggests that I have an implied license for it... right? (And I did buy Voice Command 1.6 SmartPhone for my earlier S620, so I have probably double-paid for it anyway...)
So, how do I get that original piece of AT&T-installed software back on this device after having flashed Alex's ROM?
I just prefer MS Voice Command's ability to search Contacts by sound, over Cyberon Voice Commander's requirement to voice tag individual contacts.
Thanks
-Jay
Jay
I do not think that MSVC shipped with the Tilt
to put it on your Tilt, just install the 1.6 that you purchased. I have it and the other one on my phone. I don't find the Voice Commander to recognize my voice commands as well as MSVC.
Uh, I had some trouble getting it to work, and frankly, I'm not sure what I did to get it working. I did do these things:
I had installed the patched MSVC files. (search for VOICECOMMANDREPLACEMENTFILES )
I also installed the OEM_Assign_PTT_BUtton.cab, but I'm not sure it is necessary. I'd hold off on that until last resort.
Maybe it will work just by installing it, and the replacement files. I had installed the additional memmaid apps and uninstalling them was one thing I did too.
Sorry, I can't be more exact.
Thanks, that did get Voice Command on and mostly in place of Cyberon Voice Commander. Still working on getting the bluetooth headset button to launch Voice Command.
-Jay
The launch wiht the BT headset was exactly what I had problems with. Again, I got it working, but sadly, I don't know how.
My MSVC worked straight after install..except that I do not get a call waiting tone after installation. Nobody seems to have a fix...2 of my friends with kaisers all have the same problem and we all have different roms.
This thread really worked for me. http://forum.xda-developers.com/showthread.php?t=337501
There are two versions of MSVC in the forum and they both have the same version number. I found that it was impossible to get the 4MB variant to work even with the regedits. (This is the version that you have to go into Programs and enable/save/ etc.) The other variant is only 3MB and has worked on every ROM I have installed it to using the directions in the above thread and no regedits are required.
Hope this helps...
Hi all, I recently Flashed ProVen's Rom v1.08 on my fuze and love it. I was trying to find however the version of MS Voice commander that came with it because I never had to do voice tags or anything and it worked fine. I stumbled upon Cyberon Voice Commander 2.0, and it looks promising, but I can't get it to work. It starts up fine, even from my head set, but its like it doesn't hear me talk at all. not even without the headset directly into the phone, any thoughts or suggestions would be great. thanx.
So there are some threads with this topic but no answers.
I have Cyberon installed which works great. But it doesn't show up as a regular program (I have to navigate to it in the program files) and the hands free button on my bluetooth speaker (Moto T505) doesn't trigger it.
I saw the tab in setup of Cyberon to disable the BT Handsfree button, and it isn't checked.
I'm running a relatively recent NRG Rom.
Thanks
Hi, I have a Samsung Galaxy Tab 7' whit Froyo, recently I have update to Android 2.3 whit samsung Kies.
And I have found some interesing update, but some problems to.
Normaly I use my Galaxy TAB whit "Sony DR-BT101" that have all the button I need. But after the update the application Cyberion Voice Commander dont start whit the push of the Phone in the "Sony DR-BT101" headphone.
If I hold the button for call in the "Sony DR-BT101" Galaxy Tab try to call the last number and that's all.
My Question is:
Exist some register like regedit for windows or something that I can modify for have all my button of "Sony DR-BT101" work properly?
That headphone cost a lot and use like simple headphone it's a shame.
TNX
Try these(got from AppBrain description),
1. Make sure that the platform of your phone is Android 2.2 (Froyo) or above, and your headset supports Bluetooth handsfree profile.(Already done)
2. Don't install the application on SD. Cyberon Voice Commander doesn't support APP2SD so far.
3. Restart your phone after installing Cyberon Voice Commander.
4. Re-pair BT headset and phone after installing Cyberon Voice Commander, if they have been paired.
I try, but seems doesn't work
TNX anyway
I solve it! I use a trick, I have install more than 1 program for the same use and than press the button, when the tablet ask me which one I want use I chose the one i prefer and that it.