I just got a pair of Jabra BT8010 for my Tilt and was looking forward to enjoying them but they won't play music for me. The Jabra BT8010 has a regular BT headset that works like any other BT set but it also has a cable you can attach and make it into a stereo headset with another ear bud. You press a mode button to turn on the stereo/music function.
However, the music function of the headset is on and I can control the media player but either the sound plays for about 10 seconds and goes out or no sound comes through the headset at all. Jabra & ATT were no help. HTC claimed that phone doesn't work with this BT set because the device must have a dedicated BT music headset. That sounded shady to me so I decided to check several forums and noticed some people use the same model. I've contacted these people but no reply yet. Anyone have advice on what to do for a fix?
I had the same problem at first. Using the menu on the headset itself, I was able to reset it to the factory settings, repair it with my phone, and it worked just fine after that.
Hope that helps you out.
I have a question regarding bluetooth.
I have an sony HBH-DS980 that works great for music playback on my tytn ii.
The problem i have with it is that when the music is playing and a receive a phone call it notifies me and i answer the call. After the call is over the bluetooth link seems to drop and will no reconnect untill i turn the headset off and on.
Is there a way to make the headset go back to music playing and not drop link automatically?
linxus40 said:
I have a question regarding bluetooth.
I have an sony HBH-DS980 that works great for music playback on my tytn ii.
The problem i have with it is that when the music is playing and a receive a phone call it notifies me and i answer the call. After the call is over the bluetooth link seems to drop and will no reconnect untill i turn the headset off and on.
Is there a way to make the headset go back to music playing and not drop link automatically?
Click to expand...
Click to collapse
Not having experience of this unit this may be down to the individual headset and I hope some others will come in with experience of this.
Does the headset support both Headset and Wireless Stereo profile?
If it does not, the function may not be supported. I use a Promate PM-2600 and it supports both and when I have selected Wireless Stereo (this has to be done manually!) it works without problem when answering a call and passing back to music or video play.
Hope someone with information on this particular unit gets back to you.
linxus40 said:
I have a question regarding bluetooth.
I have an sony HBH-DS980 that works great for music playback on my tytn ii.
The problem i have with it is that when the music is playing and a receive a phone call it notifies me and i answer the call. After the call is over the bluetooth link seems to drop and will no reconnect untill i turn the headset off and on.
Click to expand...
Click to collapse
Hi,
I own a Sony HBH-DS980 too, and experiencing the same problem Linxus40's having, but on my 8925 Tilt, of which is essentially the same phone as Linxus40's HTC Tynii .
It's very frustrating having to reboot the HBH-DS980 & re-press the play button to re-establish the bt connection after completion of every incoming call. It's s my understanding that the Sony HBH-DS980 supports both wireless headset & the wireless stereo profile, as I've got no problem placing & receiving unlimited bt calls without disconnection when I'm not listening to music. This said, I find the HBH-DS980's bt audio 'sound quality' fantastic thru the 8925 Tilt.
btw: I've got PocketMusic 5 and PocketPlayer 3.51 on my Tilt, but experience significantly better sound (audio quality) when my music is played via PocketMusic compared to PocketPlayer. Curious if any body else here notices this too.
Ok, any other Sony HBH-DS908 bluetooth headset owners experiencing the dropped bluetooth connection problem Linuxus40 and I are experiencing? Any advice on how the problem can be corrected?
Thanks in advance.
Jazz
jazzman-t said:
Hi,
I own a Sony HBH-DS980 too, and experiencing the same problem Linxus40's having, but on my 8925 Tilt, of which is essentially the same phone as Linxus40's HTC Tynii .
It's very frustrating having to reboot the HBH-DS980 & re-press the play button to re-establish the bt connection after completion of every incoming call. It's s my understanding that the Sony HBH-DS980 supports both wireless headset & the wireless stereo profile, as I've got no problem placing & receiving unlimited bt calls without disconnection when I'm not listening to music. This said, I find the HBH-DS980's bt audio 'sound quality' fantastic thru the 8925 Tilt.
btw: I've got PocketMusic 5 and PocketPlayer 3.51 on my Tilt, but experience significantly better sound (audio quality) when my music is played via PocketMusic compared to PocketPlayer. Curious if any body else here notices this too.
Ok, any other Sony HBH-DS908 bluetooth headset owners experiencing the dropped bluetooth connection problem Linuxus40 and I are experiencing? Any advice on how the problem can be corrected?
Thanks in advance.
Jazz
Click to expand...
Click to collapse
I'm facing the same issue as well! Tried numerous hard resets and fixes you would have thought imaginable! Unfortunately the problem is still existent and it is freaking irritating when you have to press the play button to repair the headset. Worst still - when the music starts playing through the speaker after a call, everyone starts to look at you like you are some moron.
I do really hope there is a way to resolve the problem. Any new fixes i can try???
Senior members? Any help?
linxus40 said:
I have a question regarding bluetooth.
I have an sony HBH-DS980 that works great for music playback on my tytn ii.
The problem i have with it is that when the music is playing and a receive a phone call it notifies me and i answer the call. After the call is over the bluetooth link seems to drop and will no reconnect untill i turn the headset off and on.
Is there a way to make the headset go back to music playing and not drop link automatically?
Click to expand...
Click to collapse
I have this exact same problem on my Sony Ericsson HBH-DS220.
The bluetooth will disconnect after hanging up a phone call. I don't press anything on the headset, I wait for the other person to hang up. When it hangs up, it immediately disconnects the bluetooth headset.
Annoying!
Probably a problem with the bluetooth stack then. The stack is already known to be very buggy and have problems with lots of Bluetooth devices. Luckily, unlike the graphics card, it looks like HTC will be releasing a fixed Bluetooth stack at some point in the future. In the mean time, you are probably out of luck.
Bluetooth connection problem also with Tilt
I have a Plantronics 510 BT earpiece that for no discernible reason is connected one minute and gone the next too. I haven't been able to determine any combination of actions, such as ending a call as the culprit. I always have to make the connection manually between the earpiece and the Tilt also - it never links automatically when I turn the earpiece on like it did with my Treo 650. I've had this Tilt for 3 days and this is probably going to be a show stopper and make me return it to at&t before the eval period in spite of everything else good about the phone. I also have a Plantronics Pulsar 590 stereo headset that I haven't experimented enough with yet to know if the connection is as flaky. But the bottom line is - I'll be damned if I'm going to try to fiddle with establishing a connection and all the steps it can take while I'm driving down the road!
HTC CLUB
I FOUND THIS FILE AT HTC CLUB... Dont know if it will fix your problem or not .. but its for some BLUETOOTH BUG ... This File is For TYTN2...
Description From HTC CLUB:
12/19/2007
Bluetooth Hot Fix (for HTC TyTN II)
Dropped calls sometimes occur when Bluetooth is on. If you encountered the same problem, please download this Bluetooth Hot Fix and install it on your device.
Hope This Helps
I am trying to get ALL audio to my BlueAnt Interphone unit. Calls work fine on their own, with no extra audio enabled. Audio will come through OK until I either receive and finish a call or use Voice Command, then it goes to the phone speaker. I have tried using BTMusic, BlueMusic and BTAudio and they are all good at putting audio to the headset but only BlueMusic returns the audio after the call, the others drop out after any other activity. Strangely BlueMusic will return the audio to the headset after a call, but it doesnt allow the call audio through to the headset, it can only be heard on the phone speaker. Searching the forum doesnt seem to show this problem, although several are close they dont provide a solution, though they did provide the info regarding the software choices. I have set the Bluetooth settings with Kaiser Tweak.
Currently running the HTC WM6.0.
Any thoughts or suggestions?
Cheers
Good day,
I have done a bit of searching on this topic and have not found an answer to a rather surprising issue.
I just got my GNote and have paired it with my Voyager Pro+ AD2P BT headset.
Much to my surprise even though calls and VLingo are routed to my BT headset I come to discover that event notifications are sent to BOTH the GNote's speaker AND my BT headset (with a slight delay\echo as a result).
This to me is not how it should be. All my other phones would totally mute the speaker and redirect ALL sounds to the connected headset automatically, whether it was WM, iPhone, whatever.
In my searches I see others have had the same issues with Android phones.
Am I missing something here?
Is this happening to other GNote owners, be it wired headsets or with BT headsets?
Is there an App that corrects this issue?
Is this a basic Android OS oversight?
I am shocked and can only imagine that I will have to remember to put myphone into silent mode each time I want to use my BT headset and not have notificationscome over the built in speaker. I have yet to try this as I fear it will also silence the notifications sent to my BT headset.
Curious to hear from others on this matter.
Thanks,
I upgraded to the Moto-X for the touchless controls as I commute to work and back on my motorbike and I was really unsatisfied with alternatives floating around to simulate touchless control.
Now when I am in my car and using my bluetooth headset the voice control works just fine, I can navigate, call and send quick messages no problem
But on my bike I use a Viper RSv-131 helmet which has bluetooth built in and I listen to local radio or music whilst I'm riding but my Moto-X does not respond when I cay Ok Google now or when I press the button on my helmet either I can answer incoming calls fine but thats it.
Does anyone else use a Moto-X on a motorcycle/motorbike or even a regular bicycle with bluetooth and do you have similar problems?
Have you tried Google>Settings>Voice>Bluetooth headset
Solutions Etcetera said:
Have you tried Google>Settings>Voice>Bluetooth headset
Click to expand...
Click to collapse
Thanks Etcetra, I have bluetooth headset option turned on and it works using my BT headset in the car.
My gut reaction is my car headset is a regular over the ear BT headset but my helmet is like BT stereo headphones with a microphone and so I think it's a different kind of BT but I'm not an expert.
Any advice would be welcome
Check to see which profiles are connected on each device by going into Bluetooth settings and tapping the little settings icon next to the connection.
My helmet comes up as BLINK II and is ticked for phone and media audio
dr_strangetrick said:
My helmet comes up as BLINK II and is ticked for phone and media audio
Click to expand...
Click to collapse
That's unfortunate as it suggests an incompatibility issue between the two. It should certainly work using the phone profile.
Check with the helmet maker... maybe they have a firmware update available.
Turned off media audio and just tried phone audio but still the same: (