Hi fellas.
The power button of my diamond has submerged slightly, and I'm trying to use it less frequently.
I turn off my device now using G-sen and flipping it down. As for turning it back on, I have to use the power button. I've also selected "Do not lock buttons" under keylock settings. It works great, l but I only want to use the action button to wake up the device.
Other than the "lock all buttons except power button", is there a way I can "lock all butons except the power/action button" ?
Thanks!
Help.... Anyone?
yes i want to find out too!... it will be so useful if thats possible
Turn off the phone by turning it face down.
Turn on - by taking the pen out.
So you don't use the power button...
potiron4o said:
Turn off the phone by turning it face down.
Turn on - by taking the pen out.
So you don't use the power button...
Click to expand...
Click to collapse
Nice one, bro...
But I hardly use the stylus...
Anyone?
You don't need to lock any buttons. If all you want is not to press any buttons accidentally in your pocket, just install Slide to Unlock (S2U2) and don't lock any buttons. That way, you can wake the phone up by any button and slide your finger on the screen to wake the device up.
aydc said:
You don't need to lock any buttons. If all you want is not to press any buttons accidentally in your pocket, just install Slide to Unlock (S2U2) and don't lock any buttons. That way, you can wake the phone up by any button and slide your finger on the screen to wake the device up.
Click to expand...
Click to collapse
Yea, I knew this would pop up.
S2U2 gives an extra step, which I don't want.
Just want to use the action button to wake the device. Thats all.
I have searched, but I have been unable to find a solution to my problem.
During my searches, I have discovered that many people, like myself, often struggle finding and pressing the power button to turn on and off the screen/phone.
I current use S2U2, which is a great piece of software, and even better since it is free. I use S2U2 to wake my phone up. I have set my settings to not lock the phone when device is off so to unlock/wake my phone I simply press any of the hardware buttons, and I see the S2U2 screen.
However, turning the screen off/putting it in standby is more of a hassle since I have to try and track down the tiny power button. I have downloaded and tried several free remapping programs but none of them allow me to remap a hardware button to standby/lock the phone. Generally, they only allow me to remap a hardware button to a program or setting other than standby/lock.
I would like to know if there was a way to remap a button to put the phone in standby.
I use BlackMe , more info on the website...
You could also try putting some "puffy" paint on the power button. It's that 3D paint people put on shirts etc. that bulges up when it dries. It makes a nice little bead to hit rather than trying to press the little power button.
The Reaper said:
I use BlackMe , more info on the website...
Click to expand...
Click to collapse
Does this program put the Tilt into SLEEP/STANDBY or just blank the screen. The author does not make this clear.
it just blanks the screen. I will keep up with this thread though, I have always wanted my PTT button to be my power button.....
yeah, me too. I am surprised that there isn't a solution yet....
I've always hated the hard to find power button as well. The PTT button is so easy to find and press, yet I've never, ever, not once accidentally pressed it. Why can't the power button be as raised up as the PTT one? I've seriously considered taking my phone apart and machining a replacement power button that stuck out farther. I'd probably make it out of aluminum to make it look cool, too.
But I'd be plenty happy in the mean time with remapping my PTT button to be a power button...
Yeah, I don't even need all the power button powers... I know the power button is used to do other things other than turn the screen on and off... I just want to use another button to turn the screen on and off and suspend the phone...
SPB Mobile Shell allows you to toggle the screen, suspend and many other options. I don't know if I would purchase the program just for it's button enhancing ability though.
Correction SPB Pocket Plus not SPB Mobile Shell
You could also check out AE Software at http://ae.inc.ru/
I dont know if this is kind of what you guys want, but heres my 2 cents. Go here to this thread http://forum.xda-developers.com/showthread.php?t=431328&page=4 and download Dave Shaw's awesome remake of psShutXP in post #34 (its the newest version)
Install to your MAIN DEVICE cuz thats where these shortcuts point to, then pick one of the 2 shortcuts I provided and just drop them in your main \Windows folder.
Hold down PTT button
Long_PTT
Quick push of PTT button
Short_PTT
Now, you can either just quickly push the PTT button or hold it down (depending on which shortcut you chose) and xdaShutdown will pop up giving you the option to RESTART,SLEEP/SCREEN OFF, or COMPLETELY SHUTDOWN your phone.
So essentially now, the PTT is your new power button. To put in standby mode just 2 button pushes is required. 1 push on the PTT button, then another tap on the Sleep button.
But if your really lazy and just want to be able to push PTT button once to put it in Standby/Sleep mode, then all you would do is find out the command to put the phone in standby mode (sorry I dont know it), then open notepad on your desktop, then type the command something like, this is ONLY AN EXAMPLE (42#"\Program Files\xdaShutdown\xdaShutdown.exe"), then save the file as either Short_PTT.lnk or Long_PTT.lnk and then drop the file into your \Windows folder.
But what about one push on the PTT button to wake it up out of standby? (without setting it so that all buttons wake it...)
Wow, I am an idiot. Haha. I never thought about the "wake up" part. Cuz once in Standby, the PTT button would then be non responsive so it then wouldnt work for waking the device. That is a tuff one, I have no idea how to specify what button(s) are locked/unlocked when in standby.
No way, you're not an idiot! I (and others I'm sure) totally appreciate your input. I just happened to have thought this over many, many times. I very well may have to go buy a bottle of that "puffy" paint stuff... sure would beat a full disassembly of the device to make a new, pronounced button!
I'm hoping I haven't misread the problem here, but if it is what I think it is, then you can do it with just S2U2.
I have my TyTnII set up as follows:
No button lock
S2U2 set to lock when backlight turns off
Backlight to turn off in 1 minute
In Setting/Buttons, assign "Button 4 (hold)" to S2U2
So I use it in a similar manner to the original poster. I "wake" it with a press of any hardware button (and obviously unlock it with a slide on the screen)
I lock/stand-by it by pressing and holding the OK button (it goes into standby after 1 min of being locked)
Hope that makes sense and is what you are after.
(nb am not 100% sure that the ability to set an app to run on the holding of a button is standard - I might only have that functionality dues to having SPB PocketPlus installed - am sure someone will let me know!)
Yes! this is what I was going for... I didn't even think about using your solution. Thanks!!!!
Does anyone have a problem with the hardware buttons not waking the phone up? I have my key lock setting not to lock buttons, but most of the time, my phone does not wake up when I press any of the hard keys. However, when I use the jog dial, the phone will wake up, but none of the other buttons will work.
I was wondering if there was a way to re-map the power button to the OK button so when i want to turn on my x1 screen instead of pressing the power button i press the Ok button or maybe another button?
would this be possible? thanks,
Not sure about the re-mapping, but there's a setting under settings>system>key lock that lets you wake up the device by pressing any hardware key.
I need this too!
Have you tried with one of the several button/key mapping tools available?
Did you tried long pressing end call button? Mine locks screen...
Cheers!
Edit: Try AE Button Plus to map your keys.
My kaisers power button has split in half on me, Im wondering if i can change the PTT button to be the power button thru maybe a registry change or possibly another alternative. As u kno the power button blacks the screen and locks it so u cant push buttons, and i really dont want to dial in my pocket. Can someone please help me???? I dont want to throw away a prefectly good phone bcuz of a poorly made button. Thank you guys
well i took my phone apart and swapped the camera buton for the power button, but who knows how long this one will last. Does anyone know of any reg hacks, or software that will lock the phone on a button press maybe PTT button?
Very good that you have the technical ability to do what you did
In order to not use the power button so much I advise you to install a lock utility like S2U2 for example (I suggest it because I use it and it has a very nice interface). There are also smaller and lighter apps around. Just have a look.
In addition to that you have to change the key lock settings of the phone to "lock keys if phone is locked". This will enable you to wake the phone up with any key on the phone. In order to not activate any functions of the phone with this setting you have to set the timeout of S2U2 on wakeup to 0. This way S2U2 kicks in before any of the key functions come in.
By doing these things I am able to have a phone that does not dial in my pocket and I do not use the power button to wake it up. I use the wheel.
I hope this helps.
Can anybody recommend an app what puts a lock icon widget on the homescreen? My case don't allow to press power button, and button savior is too confusing for my mother.
similar Q
Howdy, pardners!
I on the other hand wonder, whether there is possibility to disable onscreen lock - my back button is hardly reachable so i am not worried that it will get pressed. Sliding the screen everytime i just what to know the time or what ever is however quite annoying. Any chance to disable only touch screen, no screensaver - just Laucher home screen with clock, calendar..., unlocking with back button or quick some combination of others?
Would be magical !
regards
In regards to the first post: have you looked in nook touch tools? There may be a way to set one of the side buttons as the power button, therefore locking it.
Good luck!
I dont know if anyone has it too but:
Go to button savior, check the box that says android recent task.(just bottom of the first page).
And everytime that i press the n button long, it goes to lockscreen. i dont know why. Also long pressing the home button on the button saviour does the same thing too.
The power button and the "n" button go to different electrical sections than the four hard side buttons
The two buttons go to dedicated input pins, the four buttons are part of a scanning matrix.
Although it might be possible to statically enable the whole matrix so that you could detect a button push without scanning (while asleep)
it seems that they would have not handled the buttons separately if that were the case.
In short, any button can be assigned to power and put the Nook to sleep.
Although I'm not sure if any button would be able to wake it?