I just got a new htc tilt (kaiser), and I am trying to get used to the windows operating sys. I downloaded the htc home plug in successfully, but I can't download any of Schap's files on xda. I download the files and put them in a new folder and snyc my pc and phone. When i open the program in the phone i click the setup and it goes to internet explorer and downloads. When I try to open the other files is says i need to run the app first. Any suggestions, I know I am doing something stupid.
Hi,
sorry for disturbing, I try to use phm registry editor on my diamond, but it didn't install, after some tries I try to install strng version but it didn't work fine. would you please help me
The workaround is to download the appropriate CAB for your device CPU type from the PHM.lu Download Center. If you’re using Windows Mobile 5.0 or 6 (WM5 or WM6), select the Pocket PC 2000,2003 (ARM/PXA) option and download the regedit.Mrln_ARM CAB file. If you have installed the Desktop Installer version, you can grab the CAB file from the installed folder in “Program Files” too. Then copy the regedit.Mrln_ARM.CAB file to the PPC/Windows Mobile device via ActiveSync or Windows Mobile Device Center or Windows Explorer, and put the CAB file at anywhere including storage card. Launch File Explorer, and click on the CAB file with stylus, and then follow the instruction on screen to install the FHM Registry Editor. Note that you should answer Yes to security warning, and you can install it on either device itself or on memory card. After installed, sers can access and run PHM Registry Editor from Start -> Programs.
hi guys, im new here and got my diamond just yesterday.. its my first pocket pc, and i need real help..
looked around the forums and found a lot of good stuff..
downloaded a couple of applications like advanced configuration tools, gsen, registery editor, but i dont know how to install them. when i unzip the files on my pc the are in xml format and when i double click on the setup file it opens in notepad..
plz help me, what should i do? how do i install these applications?
Instead of unzipping the .cab files on your pc, you need to copy them to your diamond (using activesync or select 'disk drive' when you plug it in).
Then open file explorer on your diamond, navigate to where you copied the .cab file, and run it - .cab is an installer file for windows mobile applications
Marridi said:
hi guys, im new here and got my diamond just yesterday.. its my first pocket pc, and i need real help..
looked around the forums and found a lot of good stuff..
downloaded a couple of applications like advanced configuration tools, gsen, registery editor, but i dont know how to install them. when i unzip the files on my pc the are in xml format and when i double click on the setup file it opens in notepad..
plz help me, what should i do? how do i install these applications?
Click to expand...
Click to collapse
Or for a longer version of this:
StarMonkee said:
Instead of unzipping the .cab files on your pc, you need to copy them to your diamond (using activesync or select 'disk drive' when you plug it in).
Then open file explorer on your diamond, navigate to where you copied the .cab file, and run it - .cab is an installer file for windows mobile applications
Click to expand...
Click to collapse
Do the following, hehe
When you download most programs they will be in .CAB format. Now all this means is that they can be installed DIRECT from the phone.
What I do is create a folder on my Diamond in Internal Storage called APPS and make sure my Diamond is synced to my pc / laptop using Activesync on XP or Windows Mobile Device centre if on Vista and then copy all the .CABS that i have downloaded into the APPS folder on my phone.
Once im ready to install the applications its very simple.
On your Diamond click on START and then PROGRAMS and locate FILE EXPLORER.
When FILE EXPLORER has loaded up in the top left of the window you will notice a memory card icon with the current directory you mobile is pointing to, push this and you will then see MY DEVICE and the location you are currently at.
If you have used a pc before its very similar to how the pc windows explorer used to navigate, anyway, select MY DEVICE and then choose INTERNAL STORAGE and then APPS.
Then its just a matter of selecting which application you wish to install as all the .CABS will be displayed. Select the one you want to install and follow the installation process.
If there are any small programs 1mb or less then I tend to install these onto my phone storage memory and for games I install them onto INTERNAL STORAGE but its up to you. Some programs require a SOFT RESET to work.
The SOFT RESET button is located where the STYLUS is stored on the phone, pull the STYLUS out and then you will see a RED BUTTON inside.
Push this and your phone will restart.
There is more information here at good ol xda-developers.com and also http://modmydiamond.info
Hope this helps!
Tom
thnx guys, but i know this, i did install some applications that end with caB, but when i tried to install the gsen or the advanced config for example, they didnt come in .CAB form. they came as zip and when i opened the file, all there was files and the one names setup was as xml.
i dont know, maybe i downloading the wrong files!! plz help? where do i download those files in .CAB format?
it worked, thnx guys..
xda is the best forum all around..
I have this problem with Opera Mobile 9.5 where I try to download a cab file to install on my phone but it instead opens the cab file as text. There isn't a "Save file as" option in the menus so how can I download the cab file without opening it as text?
Type in opera:config and check through the settings, or you could reinstall.
Guys I am having this problem also and need to fix it.
The thing is when I type :config in Opera and try to log into settings nothing happens. Please how can I remove that **** Opera off my phone?????????
Need to install all the cabs that I need...
Any help would be appreciated, thanks
I have never had any problem downloading anything with Opera... Actually, I tend to try and use Opera to download with because it's download manager works so well.
It sounds like you have a setting off somewhere in your phone... probably with Opera, assuming you can download with IE just fine.
Also, you want to type in the address bar "opera:config" without the quotation marks, and that is where you will find the advanced settings that control downloads with Opera.
As well, maybe try downloading a different version of Opera? I like this one:
http://www.mediafire.com/file/ywydu3iczxn/WM6_PPC_HTC_Opera9-build_15954_WWE_QVGA.CAB
That is not what I mean.
I downloaded files throught my PC, hooked Omnia to it and copied the files to the phone's SDcard.
The cab files of all progs are "branded" Opera. meaning if you want to run them, they open through Opera and not execute style. Got it?
SilverSpear7 said:
That is not what I mean.
I downloaded files throught my PC, hooked Omnia to it and copied the files to the phone's SDcard.
The cab files of all progs are "branded" Opera. meaning if you want to run them, they open through Opera and not execute style. Got it?
Click to expand...
Click to collapse
Ah, ok... I don't think that is the same problem they were having... I don't know what the solution to that would be, since a .cab file is an .exe file written to run a PPC, thus when you click on it, it should run itself without any other program opening it...
I would say try downloading the cab files directly on to your phone with the built in browser, save them to your memory card of course...
But if you are copying a .cab file on to your phone, and using file explorer to launch it, there is no reason it shouldn't work, it is a self executing file that doesn't look for a mother program to run it... Unless somehow you have managed to change them so that they try and open with Opera, either through your phone settings or properties of the cab itself type thing.
I think I have no choice but to disable or uninstall Opera in some way.
If someone can help me to do this, I think I can manage with the cab files then...
I don't think that will fix your problem. Those files will still be linked to Opera. And if Opera is part of your ROM, you can't uninstall it... actually even if you loaded it yourself, unless you did one of the uninstallable versions, it can't be uninstalled...
At this point, it would help if you gave more information:
What, if any mods, you have done to your phone?
What program did you use to copy the files to the SD card?
Where did you get the cab files?
Heck, what cab files are they?
These mods:
http://www.samsung-omnia.org/how-to/howwhatwherewhichwhywhen/
And the cab files are related to advanced configuration tools, Omnia patched dialler, SPB mobile shell and a couple others.
You might want to ask that forum for assitance? It looks like they are pretty dedicated to the Omnia, which most everyone here does not have one. This forum is for the HTC Kaiser specifically, and the site as a whole is dedicated to HTC devices. Perhaps post in the general section of this site, but I think you will have better luck with the omnia site you got all of your cabs from.
In general, without having screen shots, or hands on knowledge of the cab files you are trying to use, about all I can say(and anybody really) in this forum is that there is something corrupt with the .cab files or your file explorer is corrupted. I would bet the .cab files are corrupted, and that somewhere along the way you did something wrong. Maybe you skipped a step in the whole process, and Opera is coming up not because they are tagged to run through Opera, but because it is suggesting to search for something using your default browser.
It really is hard to say, but I would suggest asking that forum for some support. Also, I would flat out re-download all the cabs straight to your phone from the site, not your computer. This will make sure you don't have any issues with the sync process. As well, save them to the root of you SD card, in other words not in a folder.
Sometime i got this problem but it seem it happen when the page is not fully loaded
Do you open cab files through Opera?
Open link in new tab
Hi
I have also had this problem with opera version 9.5.16277. I have found a couple of work arounds:
1) Tap and hold on the link and then select "Open in new tab"
2) Tap and hold on the link and select "Copy link location". Then manually open a new tab and paste the address into the address bar.
I have found that if 1) above does not work 2) will.
Cheers
andrew-in-woking
Sometimes it's the website itself.
For example, for Josh's Test ROM, if we click directly (even on PC) on the link, it'll open the zip file on the page. I had to 'right-click' and 'save the link as' to save the file.
It might be some code on the page ..
Input the two .reg files to the registry, should just solve the problem. You can use any regiedit tools or taskmgr.exe or total command to do it. If don't know how, please search some info first.
Skrp said:
Input the two .reg files to the registry, should just solve the problem. You can use any regiedit tools or taskmgr.exe or total command to do it. If don't know how, please search some info first.
Click to expand...
Click to collapse
The above is my answer to origional poster of this thread.
But since this thread is already goes to off-topic, I would also write my comments:
Opera opens compressed file as text on page, is a big bug for opera software, it happens to both its mobile and desktop vdersions. But latest releases of Opera Mobile seems have some progress on this issue, although still can not completely avoid it.
I downloaded a program, and it does not need to be installed, its a self executing .exe program, I need a shortcut to it in the Programs tab in touch-flo 3d. When i go to add a program, it is not there in the Programs list, yet i can use file explorer and use it.
Im using Itje's Touch-it 5.05. Thanks
Fi3nD said:
I downloaded a program, and it does not need to be installed, its a self executing .exe program, I need a shortcut to it in the Programs tab in touch-flo 3d. When i go to add a program, it is not there in the Programs list, yet i can use file explorer and use it.
Im using Itje's Touch-it 5.05. Thanks
Click to expand...
Click to collapse
you need to create a shortcut to it..
here's a hint..
Search for "create a shortcut", please please learn how to use the search function the google option is pretty good..