Database Develop

Wifi and use of IP address

I cannot connect to wifi. It says connected and it says i have an IP address but i can't navigate to any webpages. I use WEP and have WM5. If I enter a wrong wep key it won't connect so i feel that i am actually connected to the network just my device isn't realizing it. Is there any manager like the cooked rom of 2003se where i could manually choose WLan as my option to connect to the internet. I have also tried turning off wep on my router and other settings like that. Changed in between connected to work or the internet. Any ideas?

I found the problem. for some reason it was trying to connect on my gprs proxt server. that would always deny the connection. I had to set up my GPRS as my work connection and a generic connection that connected to the internet and ONLY put this network connects to the internet. Also it only worked if i used the existing my work connection and didn't work if i created my own with the same settings..
All is now well in thw WM5 world.. no more resets!!! think this might be a bug though..
I just realized that this ONLY pertains to ATT GPRS settings because they are the only ones who need to set up a proxy server..

now that connections work with my wifi i have one problem and this occurs with GPRS also.. my connections seem to time out. I was trying to download about 50k of mail and after about 10 messages it says "Unable to connect to incoming mail server" I've been connected just fine.. then the connections fails.. i have to do it all over again..

T-Mobile MDA WiFi vs. GPRS data plan settings

I have been reading WiFi threads on here for hours but can't seem to find the right answer.
I have a WiFi network at home that I can connect to when enabling Wi-Fi through the Comm Manager. My Wizard is running Xelencin's T-Mobile USA 2.26 Custom ROM (Wizard/MDA).
The problem is, when I'm at home and fire up Pocket IE, the phone tries to connect using GPRS rather than my WiFi connection. What I want is for Pocket IE to use WiFi when I'm connected to WiFi, and GPRS at other times.
Many posts reference going to Start > Settings >Connections > Connections > Advanced > Select Networks, and changing the settings for "Programs that automatically connect to the Internet..." to either "My ISP" or "My Work Network".
I have 4 items listed in these drop-downs:
My ISP
T-Mobile Data
T-Mobile MMS
My Work Network
When I look at the settings for "My ISP" there is one connection defined called "T-Mobile WModem Link" that is set to use the modem "Cellular Line (GPRS) and access point name "wap.voicestream.com"
The settings for "My Work Network" don't show a connection listed at all. If I create a new one, my options for selecting a "modem" are:
Bluetooth
Cellular Line
Cellular Line (GPRS)
Generic IrDA
Hayes Compatible on COM1:
None of these seems to be right for a WiFi connection.
The settings for "T-Mobile Data" are the same as the settings for My ISP except the connection is called "T-Mobile Data"
The settings for "T-Mobile MMS" are also the same (GPRS and wap.voicestream.com).
It seems like T-Mobile is blocking me from using Wi-Fi as the default internet connection. I really like this ROM and would prefer not to change it. Can anyone help?

with my Wizard as long as i'm connected to a wifi network (and i have an IP address and gateway from that network) it will browse with it... only when i'm not on any network connected to the internet (including via USB Active sync) does it connect using gprs. The "My ISP" conenction is configured for my GPRS Network.
Somehting i can suggest is that you open Network Adapters, select your WLAN Wireless Adapter and choose "this network card connect me to The Internet"
good luck!
PS make sure the wifi network your conecting has a shared internet connection... if its not shared your phone will use GPRS even if its connected.

Tbaba said:
with my Wizard as long as i'm connected to a wifi network (and i have an IP address and gateway from that network) it will browse with it... only when i'm not on any network connected to the internet (including via USB Active sync) does it connect using gprs. The "My ISP" conenction is configured for my GPRS Network.
Somehting i can suggest is that you open Network Adapters, select your WLAN Wireless Adapter and choose "this network card connect me to The Internet"
good luck!
PS make sure the wifi network your conecting has a shared internet connection... if its not shared your phone will use GPRS even if its connected.
Click to expand...
Click to collapse
where do you say that with "shared internet connection"

Tbaba said:
with my Wizard as long as i'm connected to a wifi network (and i have an IP address and gateway from that network) it will browse with it... only when i'm not on any network connected to the internet (including via USB Active sync) does it connect using gprs. The "My ISP" conenction is configured for my GPRS Network.
Somehting i can suggest is that you open Network Adapters, select your WLAN Wireless Adapter and choose "this network card connect me to The Internet"
good luck!
PS make sure the wifi network your conecting has a shared internet connection... if its not shared your phone will use GPRS even if its connected.
Click to expand...
Click to collapse
I have no problem browsing with Wifi. My wireless connection isnt the issue. My problem is not being able to make Wi-Fi, my default internet connection.

I think this works
I think this is the thread that solved it for me:
http://forum.xda-developers.com/showthread.php?t=261438&highlight=internet+wifi+gprs
To be fair, I usually have to try a couple of settings to get it to work automatically, but eventually I do.

No luck for me. I think I'm just going to have to learn how to cook a custom extended rom without the "T-Mobile_Network_Customizations.cab", and then hard reset. Is there a simple way to delete that cab file from the extended rom and also make that change to the "Config.txt" file (in the extended rom)? Anytime I try making changes to the extended rom via Total Commander, all the files in the extended rom end up looking garbled.

Setting up 3g

Hi,
sorry for newbing out but i have a problem setting up a 3G connection to o2 payandgo. I've tried using settings from http://www.filesaveas.com/ but to no avail. I get a screen saying "cannot connect for unknown reason" but the connection status shows that a connection to "o2 active (GPRS,3G)" is running but the web browser, weather, youtube etc fails to work.
I have used this simcard before to connect to 3G using a nokia 5310.
any help is appreciated.

same story here:
http://forum.xda-developers.com/showthread.php?t=407596

hotmail connected via cellar when wifi is available

Hi there,
I have a question about an annoying problem that I've only managed to find one (unanswered) question to on the web.
I am using WM6.1 to read email from my Hotmail account, amongst other things. The problem is that the messaging client ALWAYS tries to download my mail via 3G/GPRS even when there's a WiFi connection available. This occurs both when I initiate the send/receive using TouchFlo 3D or from within the mail client.
Connection manager is, as far as I'm aware, configured correctly, and PIE/Opera/weather will all happily use WiFi to connect to the internet, only using my data connection when WiFi isn't available.
The same results occur with connection manager configured in either of the following ways:
Internet Connection = "My ISP" settings with 3G modem connection
Work Connection = Default "My Work Network" settings
WiFi Access Point = Connects to Internet
Network Card = Connects to Internet
OR
Internet Connection = "My Work Network" with 3G modem connection and "This network connects to the internet" enabled
Work Connection = As Internet Connection
WiFi Access Point = Connects to Work
Network Card = Connects to Work
Interestingly, if I disable my data connection and enable WiFi I CAN send/receive mail over the WiFi connection, so it seems like the data connection is being used in preference to the WiFi one.
Is this a known issue or am I doing something wrong?!
Thanks,
Mike

same problem
I have the same problem since I upgraded to a 2.03 ROM (udK_Syrius_HD_BETA8_WWE)
Interested to find out a solution as also finding this annoying as worked fine before upgrade.

same problem here

USE Nodata soft
I have the same problem, use NoData soft and disabled all connections,and hotmail will connect via wifi.
Carlos

Cant connect to voice server –Wifi router Help ?

I am not able to connect to voice server. (the one tht gets activated by double pressing home button). Rest everything internet related is working perfect, including voice input in message creation.
Everytime I try I get “unable to connect to server. Please check your connection settings and try again” message.
I am using TP-Link wifi router, and connecting via PPPOE option.
Any solutions ?
PLEASE READ: I can access the voice server if I use my another backup internet line where I connect using “Auto Detect” method. Voice server also works if I use my mobile provider GPRS internet.

Bump nobody?