Database Develop

WiFi problems

Hi.
I recently bought my s730. Quite pleased with it, but one thing bothers me.
When i connect to my wlan at home (zyxel_2602hw_d1a WPA-PSK TKIP) i'm able to connect to the router, but I don't seem to be able to get an connection to anywhere outside my own network. I tried using Live Messenger, IE, Opera and Skype, but nothing happens.
When I'm using GPRS or EDGE it all works smoothly.
Any suggestions?

Do you have your connection set to automatic or only through your phone network? I have seen a few problems with that.
Also, double check that you are entering wep or any other security protocol correctly, took my 6 tries before it would work, it looked like it was connected to the network but it really wasnt (just personal experience with this phone.)

10332007 said:
Do you have your connection set to automatic or only through your phone network? I have seen a few problems with that.
Also, double check that you are entering wep or any other security protocol correctly, took my 6 tries before it would work, it looked like it was connected to the network but it really wasnt (just personal experience with this phone.)
Click to expand...
Click to collapse
I do have the connection settings in both IE and Opera set to automatic. I's there somewhere else I have to change settings?
I'm quite sure i typed the password correctly. I also checked the client list on the router and the phone showed up correctly.

Gah, cant remember where I saw it but there was a setting in the phone itself for what to connect to.
Another thing to try under the wifi connection open your saved connection and go into it and see if you have it set to connect to the internet or just to the private network under "network type" in the Wi-Fi sub menu of Wlan settings. Its late and I cant think right, i'll see about checking more into it later...

I solved this problem - change your WLAN security on your WLAN router only on exactly MAC adressee (no any WEP) and your Wings is allowed to connect and all will be OK, work OK - Skype, IE, Opera. Problem was only to find MAC adressee my Wings

Wing + WRT54GL
Hi!
I have an S730 and a Linksys WRT54GL router. I've tried to use wlan with my phone, but it doesn't working. I want to use WPA2 with AES without Radius. Is the WPA shared key (router) same to network key(phone)? without security and encryption, it's working well.. I cannot see any syslog. That could be so easy..

klenovcok said:
I solved this problem - change your WLAN security on your WLAN router only on exactly MAC adressee (no any WEP) and your Wings is allowed to connect and all will be OK, work OK - Skype, IE, Opera. Problem was only to find MAC adressee my Wings
Click to expand...
Click to collapse
I tried removing security for my phone MAC address, but there dosn't seem to be any options on my router allowing this. So I'm still stuck;-/

ksga said:
Hi.
I recently bought my s730. Quite pleased with it, but one thing bothers me.
When i connect to my wlan at home (zyxel_2602hw_d1a WPA-PSK TKIP) i'm able to connect to the router, but I don't seem to be able to get an connection to anywhere outside my own network. I tried using Live Messenger, IE, Opera and Skype, but nothing happens.
When I'm using GPRS or EDGE it all works smoothly.
Any suggestions?
Click to expand...
Click to collapse
Did you check network settings? I mean e.g. if you don't use DHCP server and you didn't fill in right settings phone may connect to network but may not get outside. I know it can look like "lame" question, but sometimes even a master can do a newbie mistake..

ksga said:
I tried removing security for my phone MAC address, but there dosn't seem to be any options on my router allowing this. So I'm still stuck;-/
Click to expand...
Click to collapse
usually it is in section WLAN Advanced setup - WEP Encryption - disable and in WLAN MAC Filters - active + allow asotiation with table of adress your Wings - aply . I have Zyxel Prestige 660HW.

I'm sure that DHCP is active, and that I get an IP.
I tried disabling security on my router, but same problem. Connects to my router, gets an IP but still nothing works

ksga said:
I'm sure that DHCP is active, and that I get an IP.
I tried disabling security on my router, but same problem. Connects to my router, gets an IP but still nothing works
Click to expand...
Click to collapse
Your DNS are also provided automatically? Or could you ping (through some app) to any IP address of any server on the internet? If you succee, then we can look for a mistake with DNS.

Problem solved!!!
Okay. Found the cause for all my sufferings...
Power management. under WLAN-settings i changed power setting from power save mode to best performance...
thanks for all the help. hope next time I have a better question

wifi problem
hello everybody,i have tried several times to connect to my router at home but no chance at the end i got this warning saying:
cannot log on to the wireless network this network requires a personel certificate to positively identify you.

Wi-Fi connects but NO data transfer

Hi,
I have just got the Diamond and I have two main problem.
1) Although I have connected the Diamond to my Home wireless network, there is no data transfer. Opera can not open pages, Youtube can not start even I can not update weather?
2) When I connect the Diamond to the Laptop / PC, all PC's and Laptops connected to my home network (wireless) drop from the connection and never connect again?
Thank you for your kind help...

I have same problem with my Diamond.

1) go to: startmenu->settings->connections->Wi-Fi->networkcard/adapter->and make sure that it says "my networkcard/adapter connects to internet"Also at the same tab open IEEE 802.11b/g Compitable Wi-Fi Adapter and try to a static ip matching the one your pc uses. (not sure about it since i can't recreate the problem atm..)
2) Try the thing I suggested in this thread http://forum.xda-developers.com/showthread.php?t=417664 (plz use search next time)

bobo_error said:
1) go to: startmenu->settings->connections->Wi-Fi->networkcard/adapter->and make sure that it says "my networkcard/adapter connects to internet"Also at the same tab open IEEE 802.11b/g Compitable Wi-Fi Adapter and try to a static ip matching the one your pc uses. (not sure about it since i can't recreate the problem atm..)
2) Try the thing I suggested in this thread http://forum.xda-developers.com/showthread.php?t=417664 (plz use search next time)
Click to expand...
Click to collapse
Thanks for your reply, but both of solutions do not work for me...
Any other suggestion?
Thanks for your help..

Try turning on wifi, then go in LAN WIRELESS and change in "improved performance"

All of this do not work for me too...

Go to Wireless LAN settings and there to power mode and set yo best battery.... that worked for me.

in "settings => connections => WiFi" is "Connected". In "Wireless Lan" there is Connected too... In log on my router there is MAC adress of Diamond as associated and authorized. All seems OK. But on Diamond do not work any internet connection (Weather, web, etc...). With Active Sync works fine. Laptop with the same settings works fine. But Diamond with WiFi... no way :-(

Any other suggestions?

Same problem after i made ROM update from 1.7... to 1.93. before works fine. no other software is istalled.

Been having an issue with connecting to my wireless network also for the last week. My phone is from orange in the UK. My wireless router is an Dlink 614+ on Virgin cable broadband.
The Diamond would connect intermittantly but then say 'not avaiable' after a period of time, or when trying to reconnect after diasbling/enabling wi-fi in the comms manager. Also, after restarting my router the device would connect for a while but not seem to 'hold' it's connection.
When the device was 'connected' I could not get opera/youtube to load a page, even though I could see the diamond in my router's log showing it connected with a leased ip address. What made it so annoying was that every other wireless mobile device/laptop I have owned has connected without any problem at all, leading me to beleive there was a problem with the phone. Again, this was rather frustrating as the phone was detecting avaliable networks but just not 'holding' the connection nor 'using' the connection in opera/explorer etc.
After searching on xda-developers and other forums for a possible known issue, I tried all the various suggestions including;
i/ increasing to best performance under power mode in Wireless LAN settings
ii/ Hard reset of router (even though other wireless devices were connected fine)
iii/ trying static rather than dynamic ip for my diamond in router settings
iv/ disabling any security/encryption on my router
v/ entering DNS settings in manually into my diamond
vi/ changing 'connect to' under wi-fi neteorks to 'Work' rather than 'the internet'
vii/ tried various roms
and other suggestions I had read about - all which didn't make a difference!
I was about to send the diamond back to Orange (here in the UK) but decided to give it one last go and change my router. I bought a Netgear WGT624 for 25 quid from PC today world and my diamond connected
straight away without an issue, and opera/youtube/messager all connected straight away to the internet. I have not lost connection once. So thats how I resolved it - obviously my device did not like 802.11b (on the original dlink router) even though all previous smartphones have connected fine and the diamond's wireless adapter is labelled b/g.
Hope that stops anyone wasting a week like I did, I would try it out on another router before making any decisions because the chip in the diamond seems a lot more picky to what it connects to than anything I've used in the past!
cheers

Linksys WAG54 is OK, Freebox is not perfect
It really seems to depend on the WiFi router.
I've had probems with my French Freebox (my ISP's ADSL+wifi router) using WPA2 AES. It would work fine, for half an hour maybe, then it would stop. It says it's connected but there is no data transfer. You can switch WLAN off and on, soft reset the phone... nothing will do. Then it will work again later on.
I downgraded encryption to TKIP and i experienced the same problem.
But then I've tried my old Linksys WAG54G router, using the exact same encryption protocol and key and it works perfectly (for hours)!
I've also tested free access (Paris public Wifi, Mc Donald's...) and they work fine.
As my ISP wifi box does not let me have a look at all the settings (beacon time, etc.) it is very difficult to tell what makes it not-so-compatible with my Diamond... But there must be something.

hotmail connected via cellar when wifi is available

Hi there,
I have a question about an annoying problem that I've only managed to find one (unanswered) question to on the web.
I am using WM6.1 to read email from my Hotmail account, amongst other things. The problem is that the messaging client ALWAYS tries to download my mail via 3G/GPRS even when there's a WiFi connection available. This occurs both when I initiate the send/receive using TouchFlo 3D or from within the mail client.
Connection manager is, as far as I'm aware, configured correctly, and PIE/Opera/weather will all happily use WiFi to connect to the internet, only using my data connection when WiFi isn't available.
The same results occur with connection manager configured in either of the following ways:
Internet Connection = "My ISP" settings with 3G modem connection
Work Connection = Default "My Work Network" settings
WiFi Access Point = Connects to Internet
Network Card = Connects to Internet
OR
Internet Connection = "My Work Network" with 3G modem connection and "This network connects to the internet" enabled
Work Connection = As Internet Connection
WiFi Access Point = Connects to Work
Network Card = Connects to Work
Interestingly, if I disable my data connection and enable WiFi I CAN send/receive mail over the WiFi connection, so it seems like the data connection is being used in preference to the WiFi one.
Is this a known issue or am I doing something wrong?!
Thanks,
Mike

same problem
I have the same problem since I upgraded to a 2.03 ROM (udK_Syrius_HD_BETA8_WWE)
Interested to find out a solution as also finding this annoying as worked fine before upgrade.

same problem here

USE Nodata soft
I have the same problem, use NoData soft and disabled all connections,and hotmail will connect via wifi.
Carlos

Apps not connecting to internet

Strange issue with my Tilt... when my apps try to connect to the internet using MEdiaNet they just close out... when I use them on a wifi connection they work with no issues.... Internet connection sharing also works fine when I tether to my laptop....
Currently using ROMeOS 3.5
Any ideas?
---UPDATE----------
After a hard reset this is the current status-
Apps are no longer closing out but some are getting a "cannot connect with current connection settings" message
PIE- connects with no issues
Google Maps- connects with no issues
Internet Connection Sharing- connects with no issues
Skyfire- Does not work... keeps on checking for flight mode
Email- Does not work- "cannot connect with current connection settings" message

is
settings->connections->connections->advanced->select network
set to my isp or whatever your device have named the gprs settings profile
if not change it so it is

Also if you have at&t go to start/settings/connections/connections. You should see MEdia Net with options underneath and My Work Network with options underneath it. Underneath MEdia Net, click the option set up my proxy server. Disable the option that says "This network uses a proxy server to connect to the internet." Hope this helps

I started having the same problem the other day. My pocket outlook will not connect using Media Net, I get the "Cannot connect with current settings" message. i didn't change anything before this started and I have tried all of the above suggestions. Does any one have any other suggestions? I will do a Hard reset only as a last resort. Thanx

Internet connection over WIFI does not work ..

Hello,
I am new to Xperia X1, just for 2 days. I am trying set up internet connection over WIFI, but no success after several hours of configuration.
- I have original rom, no extra apps installed yet
- I made factory reset on my airlive router and made only necessary setup checking then with notebook(win os) which connect to inet properly everytime..
- I can connect to AP from X1
- I can see IP served by DHCP in X1
BUT I cannot open and display any internet webpage in explorer nor running i.e. google maps preinstalled application which need internet connection. In explorer I can see messages as "connecting", "retrieving" and then "page not found" .. (in czech language) I tried in X1 explorer open only "IP" webpage but no success (if DNS in X1 fail). I tried WPA and non secure connection with AP, X1 connect fine, does not matter wireless type connection, but internet does not work.. I also tried setup IP GW DNS etc manually and it did not help..
Internet over GPRS is fine.
I have already no more ideas how make alive this basic and most important function in X1. You know, I expect tap "next", "next" and "done"
Could you help me or give some tip(s)?
Thanks a lot !

settings->connections->connections->advanced->select network
in the dropdownbox's pick
my homenetwork or what ever the non isp connection is named on your setup
and thats pretty much it
if you want to use gprs again change it back

I removed SIM card and switched off phone module avoid internet over gprs and I spent some time with your tip, but it does not work for me :-( I think I already tried all combinations, ipconfig on x1 would probably help..

sounds like it's an issue with your wifi router then
I would try another router somewhere
and update the router firmware they release fixed firmware for routers once in awhile
also just turning off the router for 10sec and turning it back on
that does the trick for me when my hdcp function in my router gets confused
and refuse to let my x1 and ipod connect
of cause I have the latests firmware in the router

next progress: I had coffee in restaurant with free wifi hotspot and I was able connect to internet on 1st try.. No extra configuration on X1 was needed..
so there must be problem at my home with:
1) Access point Airlive wl-5460
2) ADSL Router cellpipe from lucent
As I mentoined I made factory reset on accesspoint and several times disconnect it from electricity which did not help. I will try connect my AP to some friend's network outside home. I believe this is step how I could find device which do not like my new X1. btw I guess it will be adsl router..
wish me luck..

solved: wl5460 upgrade e8 -> e17
and it work great!