SMS when ignoring calls - Touch Diamond, MDA Compact IV General

when someone calls me I have the option to send a message which says " Im busy, ill call you back later ". is it possible to change that text through a registry edit?

did you try going into Setting --> Phone ---> Advanced
the first option there, i'm pretty sure you can change the message

no i did not, thank you

Is there a registry edit to bring this back up?I think after tinkering around the phone with Advance Configuration or S2U2 - that option isnt in my settings>phone>advance section and I would really like to have it back
Even in S2U2 I have the option "send busy text message" set to on

xNitr0us said:
when someone calls me I have the option to send a message which says " Im busy, ill call you back later ". is it possible to change that text through a registry edit?
Click to expand...
Click to collapse
use the registry editor to change following:--
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\PHONE\PhoneExtendSetting]
"Message"="I am busy right now. I'll call you back later."
change this to have any message....

Thank-you soo much
I will admit, I got lazy and didnt bother searching the forums, which im pretty sure it is.
Cheers!

c_shekhar said:
use the registry editor to change following:--
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\PHONE\PhoneExtendSetting]
"Message"="I am busy right now. I'll call you back later."
change this to have any message....
Click to expand...
Click to collapse
Hello,
I use S2U2 v2.04 and HTC P3400
I need to change auto SMS text. I did not find the KEY HKEY_LOCAL_MACHINE\SOFTWARE\HTC\PHONE\PhoneExtendS etting
I could only find
HKEY_LOCAL_MACHINE\SOFTWARE\HTC\PHONE
Please help.

shailesh.devasthali said:
Hello,
I use S2U2 v2.04 and HTC P3400
I need to change auto SMS text. I did not find the KEY HKEY_LOCAL_MACHINE\SOFTWARE\HTC\PHONE\PhoneExtendS etting
I could only find
HKEY_LOCAL_MACHINE\SOFTWARE\HTC\PHONE
Please help.
Click to expand...
Click to collapse
use any registry editor and you shold be finding it..

c_shekhar said:
use any registry editor and you shold be finding it..
Click to expand...
Click to collapse
I am using "S2U2 2.04" on "Samsung Omnia 910" (verizon) with registery editor "PHM Registry Editor" ver 0.70. I do not find the "HTC" part of the registry. Is this because I am using a Samsung Omnia? I have even looked under the "Samsung" key and still have not found the "Phone" key.
Any help will be much appreciated.

Arcangl123 said:
I am using "S2U2 2.04" on "Samsung Omnia 910" (verizon) with registery editor "PHM Registry Editor" ver 0.70. I do not find the "HTC" part of the registry. Is this because I am using a Samsung Omnia? I have even looked under the "Samsung" key and still have not found the "Phone" key.
Any help will be much appreciated.
Click to expand...
Click to collapse
Sorry bro! I suggested for the HTC devices..

Related

Battery and CommManager on taskbar?

Anyone know how to add these icons on traybar just like Schap's ROM ?
applications called: Power & Wireless service Manager (shows Bluetooth/Wi-Fi on traybar)
I dont want to use homeplug or other trayluncher, thanks..
optiquest said:
Anyone know how to add these icons on taskbar just like other wm5/6 ?
Click to expand...
Click to collapse
no one can answer me?
optiquest said:
Anyone know how to add these icons on taskbar just like other wm5/6 ?
Click to expand...
Click to collapse
For the power, try this. Make a shortcut of the exe file in windows\startup folder.
optiquest said:
no one can answer me?
Click to expand...
Click to collapse
Settings - Today - Elements - Tick the box "HTCHomeplug" .. voliá
research12 said:
Settings - Today - Elements - Tick the box "HTCHomeplug" .. voliá
Click to expand...
Click to collapse
really thanks, but what I need is Power & Wireless service Manager (shows Bluetooth/Wi-Fi on traybar),
idea from Schap's ROM (for Hermes), hope someone can tell me how to do that to support on Kaiser ....
check here: http://forum.xda-developers.com/showthread.php?t=338946
RGDs, Optiquest...
hey, man! how about to search little bit? there is almost every day this question and it has been solved many times. here it is for a last time and hope mods will delete this kind of question if there are some new comming!
for tray launch apps use phm tray launch!
patr!k said:
hey, man! how about to search little bit? there is almost every day this question and it has been solved many times. here it is for a last time and hope mods will delete this kind of question if there are some new comming!
for tray launch apps use phm tray launch!
Click to expand...
Click to collapse
You dont get what I mean, i dont want any tray launch,
this application is called "Schap's Power & Wireless service Manager (shows Bluetooth/Wi-Fi on traybar)" , develop by Schap, just only need power_srv.dll and wirelessMgr_srv.dll and enable some register keys...
besides, this Wireless service Manager = WIFI+BT+Flight mode in a icon..
so now, u know what i mean now??
and sorry for my poor english...
now clear
are you sure, that you need only these two dll files? looks like it has own icon "advanced configuration".. did you try to contact someone from hermes section, to give you these two files + reg. keys?
patr!k said:
now clear
are you sure, that you need only these two dll files? looks like it has own icon "advanced configuration".. did you try to contact someone from hermes section, to give you these two files + reg. keys?
Click to expand...
Click to collapse
in fact, I got these 2 dlls from Schap's ROM and copy them (include power.exe) into my TYTN II, then import these 2 reg keys, now there r two icons on my kaiser's traybar, but, but, when I enable WIFI/BT/Flight mode,
only WIFI/Flight mode's icons show instead of wireless icon, so maybe need other dll reg. key i havn't found ...
I have asked Schap several times, even pm him, but still no answer, pity....
so only i can do is ask professional persons here...wow -_-
optiquest,
here is a full package of "advanced configuration". i tried to move it to \windows folder and run application, but there is an error msg. could you try and share your status?
patr!k said:
optiquest,
here is a full package of "advanced configuration". i tried to move it to \windows folder and run application, but there is an error msg. could you try and share your status?
Click to expand...
Click to collapse
everything woks fine on my kaiser...
ps: i use chinese version, and run on SD...
hmm, strange..
when i start that, i get error msg - in advanceconfig.exe there is an unexpected error. choose "end" and then restart this programm. if you want to get more information, choose "details"..
when i click "details" there is:
advancedconfig.exe
invalidcastexception
at system.convert.toInt32
iat advancedconfig.
at advancedconfig.
at system.windows.forms.form.onload
at system.windows.forms.form._setvisiblenotify
at system.windows.forms.control.set_visible
at system.windows.forms.application.run
at advancedconfig.
Click to expand...
Click to collapse
any ideas? did you used some special dll files? did you installed net compact framework? grrrrr- i wanna run this
patr!k said:
hmm, strange..
when i start that, i get error msg - in advanceconfig.exe there is an unexpected error. choose "end" and then restart this programm. if you want to get more information, choose "details"..
when i click "details" there is:
any ideas? did you used some special dll files? did you installed net compact framework? grrrrr- i wanna run this
Click to expand...
Click to collapse
I had problems like u before when i use Hermes..
Have u changed CommManager's details? or try to disable HTC home and try again..
ps: I use standard WM6, use its build compact framework..
change commmgr details? what do you mean?
i do not use htc home
hmm, did you exported some registry? what do you have setup in region settings?
patr!k said:
change commmgr details? what do you mean?
i do not use htc home
hmm, did you exported some registry? what do you have setup in region settings?
Click to expand...
Click to collapse
if I change commManager in Advanced config (eg: add 3G or del something etc), next time when I reboot pda, I will get some error there...
Advanced config for me is useless except enable cleartype, so I think KaiserTweak will be better when I want to change somethiing in Registry.

HTC Home: Missing Contact Tab

At some point in the past few days HTC Home stopped displaying the Contacts/Favorites tab. I am (and have been) using HTC Home Customizer and I see Contacts as a choice on the Tabs setting and have selected (and de-selected several times) it but it still won't display the tab on the home screen.
I tried re-installing HTC Home but no joy...
Any and all thoughts and suggestions would be appreciated. I'm hoping someone can share their registry entries for HTC Home and/or Contacts?
Did you install one of the TouchFlo/Biotouch Cube installation cabs? They add a registry key that hides the contacts from HTCHome
^^^ If you did
i had the same problem and this worked
mdhensley5 said:
To get the favorite people tab back, delete this key:
HKEY_LOCAL_MACHINE/Software/OEM/MASD/QuickDial
Click to expand...
Click to collapse
Thanks!
ZILLA said:
^^^ If you did
i had the same problem and this worked
Click to expand...
Click to collapse
Worked great for me too! Thank you a million....
Kona_Mtbkr said:
Did you install one of the TouchFlo/Biotouch Cube installation cabs? They add a registry key that hides the contacts from HTCHome
Click to expand...
Click to collapse
I did (unsuccessfully) and the registry tweak above fixed it.
Thank you all!!!!
Greg
ZILLA - thanks, couldn't remember the exact registry value off hand ... didn't have time to look it up at that point
gregeast - glad to hear that fixed it. Sorry you didn't get the cube working ... it's not an easy install at this point, but pretty cool when you do get it working.
Thank the lawd! It works! I've been searching and reinstalling for a week.
Nice thanks
Where do you find the key HKEY_LOCAL_MACHINE/Software/OEM/MASD/QuickDial on the unit, have searched loads of directorys but couldn't find it to delete it?
Well sounds stupid, but you really looked in the Registry and not the File Structure? It is exactly there under MASD....
gemini_6_7 said:
Where do you find the key HKEY_LOCAL_MACHINE/Software/OEM/MASD/QuickDial on the unit, have searched loads of directorys but couldn't find it to delete it?
Click to expand...
Click to collapse
You have to use Regedit program and to search you have to search for QuickDial
not the whole thing. If you cant find a registry editing program, I think you are out of luck.

How to change the main menu soft button?

Hi,
I have a Treo 750v (Vodafone version) which like what it's box said it is meant for email solution, that's why the left soft menu of the Today screen menu is set to Email.
Anyone know how to change this?
Thanks, appriciate your share of knowledge!
I forgot the details but this i know as much
You have to download the register editor program. Search around the registry is all the same when it comes to changing soft key for all WM phones.
The only problem with the Treo 750 is when you change the softkey from email to something else it ends up adding an extra short cut. So in essence you are not overwriting that key, all you are doing is adding an extra feature on top of the existing email button.
Maybe someone had better success than I did can chime in
Using a registry editor, navigate to Hkey_Current_User/Software/Microsoft/Today/Keys/112
Change all 3 values to reflect your new function
or:
http://wiki.xda-developers.com/index.php?pagename=Universal_Registry
awesome!
mtiberio said:
or:
http://wiki.xda-developers.com/index.php?pagename=Universal_Registry
Click to expand...
Click to collapse
wow, thank you very much mtiberio!
your link really hit the spot!
Very odd - my Registry setting for 112 was already showing Calendar as the default value but on screen it shows email.
tinyflier said:
Very odd - my Registry setting for 112 was already showing Calendar as the default value but on screen it shows email.
Click to expand...
Click to collapse
It's all because Palm plugins - they overlay it. If you disable Active Call (or Dial Lookup?) you can have native-windows softkeys. It was all described in instructions how to ged back default dialpad.
i just downloaded the soft key changer that i found on here i think it was in the hermes section and copied it to my windows folder... after i did that it shows up in my settings and i can change both soft keys to what i want
was it:
"FdcSoft SoftkeyAppletEx.cab"
Gyngabread Man said:
i just downloaded the soft key changer that i found on here i think it was in the hermes section and copied it to my windows folder... after i did that it shows up in my settings and i can change both soft keys to what i want
Click to expand...
Click to collapse
it would be great if you share the file or where you get it, so we all can get it too...
mtiberio said:
was it:
"FdcSoft SoftkeyAppletEx.cab"
Click to expand...
Click to collapse
it is caled softkeyapplet but its not a cab it was a zip i just unzipped and put in my windows folder i believe... i will look in my external driveand post it im not sure where it is but i'll try to find it
ok i found it on my drive but i did some searching on the forums and alot of ppl mention it but dont upload it and im guessing its for good reason... dont wanna piss ppl off by posting something i shouldent if its ok though then i'll do it but i think its the same one your talking about for me it worked like a charm no reg editing
Here it is:
http://forum.xda-developers.com/attachment.php?attachmentid=65261&d=1199898052
Found it here:
http://forum.xda-developers.com/showpost.php?p=1802007&postcount=827
You will need to reset your device for it to show up in your programs list.
Chillin said:
Here it is:
http://forum.xda-developers.com/attachment.php?attachmentid=65261&d=1199898052
Found it here:
http://forum.xda-developers.com/showpost.php?p=1802007&postcount=827
You will need to reset your device for it to show up in your programs list.
Click to expand...
Click to collapse
Hi, thannks for the direct links. I'm going to try installing it. i hope it'll be fine.
seems it doesn't work with wm6. after installing it, the program isnt available in my program.

Text message unlocks phone

When i receive a text message my diamond unlocks automatically? Is there any way to avoid this? Can get expensive if i don't hear the text message and the phone in my pocket calls somewhere or something...
Using latest Dutty 3.6b i think it is..
Any help is appressiated
/C
Advanced config solved it
Which config option did you use?
yeah ive noticed this!!!! how did you solve? im on same rom and use S2U2
yeah, i'd like to know the option too. mine used to light up so i could see the summary of the message for a few seconds. now it doesn't. it could be the same option.
To disable/enable wakeup use this advanced config option: Messaging/Wake up on new SMS.
Diamond TF3D config also can change this.
You can use any registry editor;
HKLM\Drivers\BuiltIn\RIL : DisableSMSWakeUpEvent
Change value to "0"
kosherpig said:
To disable/enable wakeup use this advanced config option: Messaging/Wake up on new SMS.
Diamond TF3D config also can change this.
Click to expand...
Click to collapse
I don't see such an option in ACT.
In version I have on my phone it is present:
And as far as I remember I downloaded it from this site.
kosherpig said:
In version I have on my phone it is present:
And as far as I remember I downloaded it from this site.
Click to expand...
Click to collapse
what version you got i have 3.3.0.0 and i do not have that option?????
apaquette420 said:
what version you got i have 3.3.0.0 and i do not have that option?????
Click to expand...
Click to collapse
Indeed. Same here.
camakus said:
You can use any registry editor;
HKLM\Drivers\BuiltIn\RIL : DisableSMSWakeUpEvent
Change value to "0"
Click to expand...
Click to collapse
I dont have that registry on my rom..?
Seems 3.2 has it.
Odd
I think it's odd to remove this option when updating you're program/utility. Well i'll just change it in registry then.
Thanks for your help!
Can not get phone to NOT wake up when text comes in
I have tried a number of different things to try to STOP the screen from waking up on a new text message. I have tried everything except the older version 3.2.. of the advanced config utility. I have a Sprint version of the diamond. The Disablesmswakeupevent does not work on my system. It does not show up in the registry and when I create it, it still does nothing. This seems like such a silly thing to not have the option of adjusting in the oem configuration. The Pro has it, why not the non-pro version.
Many thanks for anyone that has a suggestion on how to get this screen to STAY OFF when a text comes in. Perhaps even a lock on incoming text that will be unlocked by the light sensor.
-Jeff

Change "Notes" Application on dialer

Hi to you all. I wonder if anyone could help me, as i can´t find any help on older threads. On dialer there´s a button "Note". During call, if clicked, take us to, i guess, standard WM Notes application. How can i change this shortcut to Screenwriter or Apmemo?
Thanks,
C´mon guys this is not a hard one I suppose. Or is? Regards.
Dump the M$ app and rewrite it the way you want ?
denco7 said:
Dump the M$ app and rewrite it the way you want ?
Click to expand...
Click to collapse
lol or look through reg @ phone settings mind you i think it's hardcoded "but could be wrong"
New htc song plays in background while placed on hold
You both are not helping at all. I read somewhere that the spirit/goal of this forum is not that kind of behavior.
I don´t need standard notes at all. I think that if i can find the executable and the parameters of the link on the button, i can replace it with a shortcut or even a mortscript.
Anyway thanks for your reply as now i know you both can´t help.
Regards.
Um so the look through the reg for phone doesn't help?
It's not going to be a .lnk and as previously stated the button will most probably be hardcoded.
Looking throu reg finds nothing also i doubt another software would follow the default format of note.
So my hunch says no you cant.
I can´t find a clue on registry. Thanks Stylez.

Categories

Resources