Database Develop

Wake up! Diamond! :-(

Hi all the xda guru. Many people like me experienced a problem of HTC Diamond:
In standby mode, if a new SMS comes in. Diamond won't make any sound an vibration even THEY HAVE BEEN SET in the "Sounds & Configuration". I tried to disable the TouchFLO3D, and this problem won't happen again.
Is this a bug? Anyone is developing a fix to this problem?????
Thanks!!!

Yes I have the same problem. The phone won't ALWAYS...but SOMETIMES only vibrate when the screen is off. However, whenever I turn the screen on, it will vibrate and notify me. Just a minor glitch I suppose!

wait for the rom-upgrade. hope allthe problems will be solved..

ok. SMS wake up is disabled by default in registry. thats in HKLM\drivers\builtin\ril
as far as I am remeber. I will confirm soon. that needs to be enabled.
I see the reason for this though:
if you phone wakes up to SMS it shortens the battery life for you.
EDIT:
HKLM\Drivers\BuiltIn\RIL :
DisableSMSWakeUpEvent <-- set to "1" by default. meaning NO wake up to SMS message
Change this value to "0", soft reset you phone and verify that value is correct.
I hope it helps.
P.S. please add this to Diamond Tweaks thread

SecureGSM said:
ok. SMS wake up is disabled by default in registry. thats in HKLM\drivers\builtin\ril
as far as I am remeber. I will confirm soon. that needs to enabled.
I see the reason for this though:
if you phone wakes up to SMS it shortens the battery life for you.
EDIT:
HKLM\Drivers\BuiltIn\RIL :
DisableSMSWakeUpEvent <-- set to "1" by default. meaning NO wake up to SMS message
Change this value to "0", soft reset you phone and verify that value is correct.
I hope it helps.
P.S. please add this to Diamond Tweaks thread
Click to expand...
Click to collapse
Thanks man! Is there one for email..or?

it supposed to FLASH LIGHT for you for 5 minutes by default instead of waking up phone to that.. that should be logically enough to alert you. If it does not, I would also add to that:
Settings-->Sound and notifications-->Notifications -->Messaging: New e-mail message:
1. Play sound (choose one) or even repeat as well.
2. Display message on Screen
I hope it helps.
Is there one for email..or?
Click to expand...
Click to collapse

SMS wake up!!!!!
SecureGSM said:
ok. SMS wake up is disabled by default in registry. thats in HKLM\drivers\builtin\ril
as far as I am remeber. I will confirm soon. that needs to be enabled.
I see the reason for this though:
if you phone wakes up to SMS it shortens the battery life for you.
EDIT:
HKLM\Drivers\BuiltIn\RIL :
DisableSMSWakeUpEvent <-- set to "1" by default. meaning NO wake up to SMS message
Change this value to "0", soft reset you phone and verify that value is correct.
I hope it helps.
P.S. please add this to Diamond Tweaks thread
Click to expand...
Click to collapse
May i know how can i get into the registry to change the setting?

keith83 said:
May i know how can i get into the registry to change the setting?
Click to expand...
Click to collapse
Use a program called resco registry editor
Can download it from here:
http://www.resco.net/pocketpc/explorer/
Download the file...connect your phone to the pc and click on the downloaded file and it should install onto the phone.

SecureGSM said:
it supposed to FLASH LIGHT for you for 5 minutes by default instead of waking up phone to that.. that should be logically enough to alert you.[
Click to expand...
Click to collapse
I can confirm this. On new email the light flashes. But now, for me, suddenly it doesn't, anymore (it flashes AFTER I turn it on which makes not too much sense). Can anybody help? I think I checked everything and also I didn't change a setting. Somehow it does not react to new email until I switch it on. Of course I only use standby and not turn it off completely with long push on the button.
Regards,
Frank

frankmuel said:
I can confirm this. On new email the light flashes. But now, for me, suddenly it doesn't, anymore (it flashes AFTER I turn it on which makes not too much sense). Can anybody help? I think I checked everything and also I didn't change a setting. Somehow it does not react to new email until I switch it on. Of course I only use standby and not turn it off completely with long push on the button.
Regards,
Frank
Click to expand...
Click to collapse
Are there any fixes for this yet? Having to turn the phone on (out of sleep) to see if there are emails when it should alert you makes auto email retrieval kinda pointless.

Wake on e-mail!
Bump...
Wakeup on e-mail.
Is there a way to wake-up the Diamond when i get an email message?
So far I have to check manually if there is email. No wake-up, no sound.
I hope there is a way...
K

KraFT_mk said:
Bump...
Wakeup on e-mail.
Is there a way to wake-up the Diamond when i get an email message?
So far I have to check manually if there is email. No wake-up, no sound.
I hope there is a way...
K
Click to expand...
Click to collapse
Bump (sorry for the old thread).
Is there a way to wake up the Diamond when it's in standby when you receive a new email (either push or via Windows Live)?

i posted this in another thread and it works for me.
http://forum.xda-developers.com/showthread.php?t=427459&highlight=email+wake&page=2

mate hows ur phone?

Dismiss Alarm Box Unchecks itself

every 2 or 3 days when my alarm sounds i get no onscreen noticfication to dismiss the alarm, only the symbol in the status bar.
When i look into sounds notification/reminders i see the "display message on screen" box is unchecked again so i recheck it.
What causes this to uncheck itself?
are you experiancing this behaviour or have any insight into the cause?
thanks

I have the exact same prob. It started when I used Diamond TF3D Config prog to change the diamond theme.
Dont know why it happens bro.

Anyone knows how to disable Missed Alarm Alert (symbol on the status bar) so I don't need to go to status bar console and remove it every morning ?

drdoc said:
I have the exact same prob. It started when I used Diamond TF3D Config prog to change the diamond theme.
Dont know why it happens bro.
Click to expand...
Click to collapse
I believe i was having this problem before i had installed Diamond TF3D.
The search continues.
Im having the problem on TLR3 ROM and i know people who are also haveing this trouble on 1.37 original ROM and the 1.93 Original.

I'm using TF3D Config and also 1.93 ROM but I don't seem to have this issue?
Although I have never used it to apply a 'theme' only, to change date/time format and apply one of the performance tweaks.
Have you guys updated your TF3D config via apptodate and also tried restoring defaults (within TF3D config) and then tried applying your settings again?

i too only use TF3D config to format the date, i have updated it using apptodate.
I may uninstall it and see what effect that has, im not really sure that TF3D is the cause of the problem.

rumpleforeskin said:
i know people who are also haveing this trouble on 1.37 original ROM and the 1.93 Original.
Click to expand...
Click to collapse
Yes, I'm on the original 1.37 ROM and am seeing this - bl00dy annoying too as it seems such an odd 'bug'....
Mathew

Had this happen again today, really annoys the wife as i spend time trying get the phone to shut up.
I have made no progress determining the cause, but it does only seem to uncheck the box after a soft reset, but strangley not after every soft reset..... the plot thickens

This problem only happens after i reset the device, but not every time.
As i cant find the cause i was thinking of a way to fix the problem.
i found the reg entry for the reminders show "on screen"
\HKEY_CURRENT_USER\ControlPanel\Notifications\{15F11F90-8A5F-454c-89FC-BA9B7AAB0CAD}
and i have the values for the box checked and unckecked.
I have been googleing for the past hour but having no luck with what i want to achieve.
I would like to write a batch file to open a reg file that will change the dismiss box registry entry to the checked value, but it seems batch files cannot be run from the windows start up folder.
Im not very technically skilled with programming so could someone more knolegable point me towards the correct way of doing what i desired, which is change a rehgistry value at start up.

rumpleforeskin said:
i found the reg entry for the reminders show "on screen"
\HKEY_CURRENT_USER\ControlPanel\Notifications\{15F11F90-8A5F-454c-89FC-BA9B7AAB0CAD}
Click to expand...
Click to collapse
I could write an executable that will restore the registry entires on start-up but I can't find the registry value that controls it.
Which value are you editing?

Start / Settings / Sounds and Notifications
Page Notifications
Event - choose Reminders
Check on Display Message.
CHEERS

pegaz said:
Start / Settings / Sounds and Notifications
Page Notifications
Event - choose Reminders
Check on Display Message.
CHEERS
Click to expand...
Click to collapse
If that was in reply to me, I'm looking for registry entry!

This thread seems closest to the problem I have.
For me it is always that on alarm there is no popup where I can dismiss the or snooze the alarm
I always have to unlock the phone (by entering password), tap the status bar, then choose the alarm button and then the pop up appears as it should have done by itself.
This is always, no matter if I reset or not. And, I have checked on "display message" when I look into the settings.
This is freaking weird and annoying.

I've noticed the box unchecks after the sync process via Activesync.

I'm pretty sure it's caused by particular side software we have installed on our Diamons. I propose to post the side software list we have and then point out the pattern.
My list:
MS Voice Command
Finix Battery Icon
Splash ID
Sprite Backup
Diamond Tweak
Resco Explorer
Yandex Maps
Skype
CorePlayer
G-Alarm
Manila Calculator Skin
Yota TV

Nice idea but already flawed given you've not published an exhaustive list. A case in point being Activesync - that's a resident piece of software and furthermore one which you suspect as possibly being responsible!
Or are you certain it is a non-Windows issue? That's quite a leap of faith given we've all previously been scratching our heads...
I don't mean to come across negative, but I also don't want to see a futile attempt at finding a solution!
Mathew

No I am not pretty sure it's not Windows issue. However, if it is, why there are so few of us suffering?
I suspect G-Alarm, got to try to play around with it being uninstalled.

I'm having the same annoying problem since running the 2.03 official ROM. On the 1.93 I never had this problem. I didn't install G-alarm or TF3DConfig.

Moonsower said:
No I am not pretty sure it's not Windows issue. However, if it is, why there are so few of us suffering?
Click to expand...
Click to collapse
That's a very good point, although it could quite simply be down to a combination of i) a limited number of people using the alarm, ii) affected users not being bothered by the issue, and/or iii) affected people not realising they are being affected!
I suspect G-Alarm, got to try to play around with it being uninstalled.
Click to expand...
Click to collapse
For what it's worth I've never used G-Alarm...
Mathew

Polluxus said:
I'm having the same annoying problem since running the 2.03 official ROM. On the 1.93 I never had this problem. I didn't install G-alarm or TF3DConfig.
Click to expand...
Click to collapse
I had it on 1.93 and still on 2.03

SMS when ignoring calls

when someone calls me I have the option to send a message which says " Im busy, ill call you back later ". is it possible to change that text through a registry edit?

did you try going into Setting --> Phone ---> Advanced
the first option there, i'm pretty sure you can change the message

no i did not, thank you

Is there a registry edit to bring this back up?I think after tinkering around the phone with Advance Configuration or S2U2 - that option isnt in my settings>phone>advance section and I would really like to have it back
Even in S2U2 I have the option "send busy text message" set to on

xNitr0us said:
when someone calls me I have the option to send a message which says " Im busy, ill call you back later ". is it possible to change that text through a registry edit?
Click to expand...
Click to collapse
use the registry editor to change following:--
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\PHONE\PhoneExtendSetting]
"Message"="I am busy right now. I'll call you back later."
change this to have any message....

Thank-you soo much
I will admit, I got lazy and didnt bother searching the forums, which im pretty sure it is.
Cheers!

c_shekhar said:
use the registry editor to change following:--
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\PHONE\PhoneExtendSetting]
"Message"="I am busy right now. I'll call you back later."
change this to have any message....
Click to expand...
Click to collapse
Hello,
I use S2U2 v2.04 and HTC P3400
I need to change auto SMS text. I did not find the KEY HKEY_LOCAL_MACHINE\SOFTWARE\HTC\PHONE\PhoneExtendS etting
I could only find
HKEY_LOCAL_MACHINE\SOFTWARE\HTC\PHONE
Please help.

shailesh.devasthali said:
Hello,
I use S2U2 v2.04 and HTC P3400
I need to change auto SMS text. I did not find the KEY HKEY_LOCAL_MACHINE\SOFTWARE\HTC\PHONE\PhoneExtendS etting
I could only find
HKEY_LOCAL_MACHINE\SOFTWARE\HTC\PHONE
Please help.
Click to expand...
Click to collapse
use any registry editor and you shold be finding it..

c_shekhar said:
use any registry editor and you shold be finding it..
Click to expand...
Click to collapse
I am using "S2U2 2.04" on "Samsung Omnia 910" (verizon) with registery editor "PHM Registry Editor" ver 0.70. I do not find the "HTC" part of the registry. Is this because I am using a Samsung Omnia? I have even looked under the "Samsung" key and still have not found the "Phone" key.
Any help will be much appreciated.

Arcangl123 said:
I am using "S2U2 2.04" on "Samsung Omnia 910" (verizon) with registery editor "PHM Registry Editor" ver 0.70. I do not find the "HTC" part of the registry. Is this because I am using a Samsung Omnia? I have even looked under the "Samsung" key and still have not found the "Phone" key.
Any help will be much appreciated.
Click to expand...
Click to collapse
Sorry bro! I suggested for the HTC devices..

New Text message - no sound

Hello all,
sorry for my bad english
Some how, my diamond doesnt makes alert sound when a new text message is recived. Every other event makes sounds perfectly.
I set it to make a sound and vibrate in the old winmo interface.
I found no option like this in diamond tweak or advanced config
(thos programs has only ringtone change option - and my diamond ring just fine. I used advanced config to set it to wake up when a new message arrives.
What can be the problem.

Same problem here, but with new MMS. SMS notification works normally.
MMS work with the new ROM.
But the MMS notification has no sound and no vibration, even if checked in the settings.

me again
I just found out that the same problem happens when I get a new Email message - the device makes lights but no sound even though I set it to at the events area in windows mobile settings. When I press the play buttin there it playes the sound perfectly.
HELP PLEASE

Had the same problem, I managed to set an inbuilt ringtone. Maybe it is not as good as my own, but at least I can hear anything. Search for it.

Is the Wake up from new SMS enabled?

it is enabled
maurophp said:
Is the Wake up from new SMS enabled?
Click to expand...
Click to collapse
yes it is, but it does not seem to be working.
when i get a nes sms or email the phone just lights its round button.
and i am using a builtin ringtone. it calles Alert-Glass2

maurophp said:
Is the Wake up from new SMS enabled?
Click to expand...
Click to collapse
where can i enable wake up on new SMS?

murata said:
where can i enable wake up on new SMS?
Click to expand...
Click to collapse
you need diamond tweak for that - but as i said, it doesnt seem to work

help
ididid said:
Hello all,
sorry for my bad english
Some how, my diamond doesnt makes alert sound when a new text message is recived. Every other event makes sounds perfectly.
I set it to make a sound and vibrate in the old winmo interface.
I found no option like this in diamond tweak or advanced config
(thos programs has only ringtone change option - and my diamond ring just fine. I used advanced config to set it to wake up when a new message arrives.
What can be the problem.
Click to expand...
Click to collapse
Please Help ME...

ididid said:
Please Help ME...
Click to expand...
Click to collapse
I had problems with AZTOR rom and now i using Vic rom and i have no more problems with SMS.
maybe you can also try it.

rom cahnge
Cant change rom. If ill do it i will lose my importer warranty.

ididid said:
Cant change rom. If ill do it i will lose my importer warranty.
Click to expand...
Click to collapse
could you tell us wich rom version you are using at the moment

I am using Alarm4 if this does matter.
Tried my procedure?
kosherpig said:
1. Open TF3D Settings tab
2. Choose Sounds
3. Toggle last option two times (so it goes back to your current passing another)
4. Click More (right softkey)
5. Go to the second tab
6. Choose New SMS sound
7. Select some inbuild ringtone
8. Click OK
9. Repeat steps 4-8 skipping step 7
10. Test it.
Click to expand...
Click to collapse

me again
murata said:
could you tell us wich rom version you are using at the moment
Click to expand...
Click to collapse
ROM: 1.93.456.2 WWE
date: 7/10/08
ExtROM: 1.93.456.21

sorry for my bad english...
actually, i ever had this problem before, it is:
in the events area in windows mobile settings. if you press the play button, it playes the sound perfectly, but when a message is received, there is no alert sound...
that's because i changed the sms mode from "chat mode" to the traditional one (i just don't know how to express this, but i think you can understand) and when i change this back to normal, the sound comes back again
hope this can be helpful

Are these not working ringtones in MIDI format?
Just noticed setting a certain MIDI ringtone makes all MIDIs for this event fail.
(I switched to WMA and I am happier than with MID )

enable vibra
ididid said:
Hello all,
sorry for my bad english
Some how, my diamond doesnt makes alert sound when a new text message is recived. Every other event makes sounds perfectly.
I set it to make a sound and vibrate in the old winmo interface.
I found no option like this in diamond tweak or advanced config
(thos programs has only ringtone change option - and my diamond ring just fine. I used advanced config to set it to wake up when a new message arrives.
What can be the problem.
Click to expand...
Click to collapse
TRY: settings --> sounds&notifications --> notifications (tab) --> Event: Messaging: New text message and check the "Vibrate" checkbox. Worked for me after updating rom 1.97 to 2.03

Wrong Text Timestamps

I'm just wondering why all my text messages that I receive have a wrong timestamp when they show up in my phone. I've tried looking for options in settings, but haven't found anything.
I am currently running MightyRom.
TIA,
Bernie

berniebennybernard said:
I'm just wondering why all my text messages that I receive have a wrong timestamp when they show up in my phone. I've tried looking for options in settings, but haven't found anything.
I am currently running MightyRom.
TIA,
Bernie
Click to expand...
Click to collapse
Use this cab to fix your problem.

Looking at the file called _setup, I guess I could just manually edit the registry?
But thanks for the quick reply. Is this a fault in the phone itself, or is it a bug in my MightyRom firmware?
EDIT: I just went inside the registry, and the value for TrustTimeZoneField is already 0. :S

I use this cab to fix the time stamp so far for mostly all cooked ROM's. Didn't used to have to do this until the 2.03 cooked ROMs came through.
Did you fix this using Reg Edit?

From my understanding of what the program does, it just changes TrustTimeZoneField to 0. However, the integer on my phone is already set to 0 according to the registry editor.
Do I actually have to install the .cab file onto my Diamond?

Yes....for me it works all the time. Don't worry, it doesn't ask for location, it's a quick install and that is it.

I installed it and it still doesn't work. All the texts are timestamped as 7 hours ahead, haha.

berniebennybernard said:
I installed it and it still doesn't work. All the texts are timestamped as 7 hours ahead, haha.
Click to expand...
Click to collapse
Sorry about that....works for me

Does anyone know whether or not this works for Dutty's HD V2.6 XTREME rom?

squirtoise said:
Does anyone know whether or not this works for Dutty's HD V2.6 XTREME rom?
Click to expand...
Click to collapse
If you are afraid of trying the cab then get Regedit app and find and change the following..
Go to HKEY_LOCAL_MACHINE\SOFTWARE\OEM\PhoneSetting\
Find "TrustTimeZoneField" and give it a dword value of 0