Related
I can't use voice dialer when S2U2 locks phone, is there a way around this? I like the S2U2 application, but when I am driving and need to make a phone call via bluetooth handfree I can't, because s2u2 block the voice dialer.
I did look for a solutions via the search engine and in the s2u2 thread, but no luck thus far.
which device?
which ROM?
which voice dial app?
smittyofdhs said:
which device?
which ROM?
which voice dial app?
Click to expand...
Click to collapse
Thanks for your response,
HTC 8925 (Tilt)
Dutty's Touch AT&t beta 2
Cyberon Voice Speed Dial V1.2 build 070626
The newest version of S2U2 v0.95 offers a solution to this problem by adding the ability to use exceptions to temporarily disable S2U2.
1) Install the new version.
2) Run iLock2 to close the application.
3) Use a registry editor:
Under \HKEY_CURRENT_USER\Software\A_C\S2U2, find an open ExceptionEXE(0-9) (STRING). I used ExceptionEXE3. Enter the value: "SDDialer.exe" (this is the application that runs when you press the button on your bluetooth headset).
4) Run iLock2 to restart the application and you're done.
Thanks to tompol for discovering this solution. I first tried it by entering the value: "Voice Speed Dial.lnk", but this didn't work.
Hello,
i have another problem with S2U2 on my Kaizer, and i think i created it but cannot get through it. After i did some changes on the S2U2 settings now every time the lock goes on and even if i open the settings i get a black screen and can not do anything. If i press the power on button to turn off the screen and then on, i get the S2U2 screen but frozen, with out any animation! I have tried to remove and re-install the application but i get the same response from the program. Could someone give me some help, because i really like the application but can not use it...
TIA,
Nikos.
NikoS3 said:
Hello,
i have another problem with S2U2 on my Kaizer, and i think i created it but cannot get through it. After i did some changes on the S2U2 settings now every time the lock goes on and even if i open the settings i get a black screen and can not do anything. If i press the power on button to turn off the screen and then on, i get the S2U2 screen but frozen, with out any animation! I have tried to remove and re-install the application but i get the same response from the program. Could someone give me some help, because i really like the application but can not use it...
TIA,
Nikos.
Click to expand...
Click to collapse
did you turn on the directdraw option or safe mode option?
When you uninstall an app, it leaves behind the registry entries. As soon as you reinstall the app, those settings are in affecct again. Uninstall the app, use a registry editor to remove the following key, soft reset, then try to reinstall:
The key to remove is HKCU\Software\A_C
Ok, I had the exact same problem, the problem is indeed with D3D option, you need to disable it. As soon as it is off and the settings are saved, the program works fine once again, and smoother then previous version.
This part is gonna be hard to explain... but here it goes...
First thing to do is run ilock so that when u turn the screen off it doesn't start S2U2.
When you open the settings the screen freezes, like the kaiser crashed, but if you move down and you turn the screen off and on, you'll see the menu scrolled down.
Basically that means u're working blind, changes do occur but u can't see, so the process is to move it down, turning the screen off and on sistematically until u see the d3d option and turn it off, then save it.
Hope I explained myself enough.
Takes some work, but doesn't require registry tweaking and other settings are kept.
Keep posted on results.
Cheers, Esko
NikoS3 said:
Hello,
i have another problem with S2U2 on my Kaizer, and i think i created it but cannot get through it. After i did some changes on the S2U2 settings now every time the lock goes on and even if i open the settings i get a black screen and can not do anything. If i press the power on button to turn off the screen and then on, i get the S2U2 screen but frozen, with out any animation! I have tried to remove and re-install the application but i get the same response from the program. Could someone give me some help, because i really like the application but can not use it...
TIA,
Nikos.
Click to expand...
Click to collapse
Thank you both for your fast and details replies!!!
It was indeed the direstdraw option. It was easier for me to try eskostar's method, especially since i had tried the same blind procedure but i did not figure the trick with running the ilock first!!!
Everything worked out great!!! Now i can use this excellent program again!!!
Thank you again!!!
Cheers, Nikos
I have this problem. When I start S2U2 and miss call screen remains as it is when someone call (caller's number and slide to answer or two buttons with green and red phone). Whatever I push or click nothing happens. So I must softreset or turn off and on my Kaiser. Some tips?
Sorry I dont have that issue. However my problem with this version of S2U2 is when SLide to Answer is Active you can still use the Hardware Keys to answer!
Anyone no how to deactivate the Hardware keys during Slide to Answer?
MM
bersca said:
The newest version of S2U2 v0.95 offers a solution to this problem by adding the ability to use exceptions to temporarily disable S2U2.
1) Install the new version.
2) Run iLock2 to close the application.
3) Use a registry editor:
Under \HKEY_CURRENT_USER\Software\A_C\S2U2, find an open ExceptionEXE(0-9) (STRING). I used ExceptionEXE3. Enter the value: "SDDialer.exe" (this is the application that runs when you press the button on your bluetooth headset).
4) Run iLock2 to restart the application and you're done.
Thanks to tompol for discovering this solution. I first tried it by entering the value: "Voice Speed Dial.lnk", but this didn't work.
Click to expand...
Click to collapse
Thank you for your response, I will try this when I get back from vacation.
Sempai32 said:
Thank you for your response, I will try this when I get back from vacation.
Click to expand...
Click to collapse
Did this work for you?
Im having the same problem, but dont have a registry editor installed to test it.
LDJ said:
Did this work for you?
Im having the same problem, but dont have a registry editor installed to test it.
Click to expand...
Click to collapse
yeah it works, get a reg editor and do as stated, it works.
Just saw this, and now it won't lock on it's own now that I did the regedit.
???
CocheseUGA said:
Just saw this, and now it won't lock on it's own now that I did the regedit.
???
Click to expand...
Click to collapse
if any of the apps in the exception list are running, not just in the foreground, even if they are running in the background, then [email protected] will not enable. Check your exception list, make sure none of those apps are currently running, then try again. If you still have issues after that, then it's with S2U2, not the exception list.
smittyofdhs said:
if any of the apps in the exception list are running, not just in the foreground, even if they are running in the background, then [email protected] will not enable. Check your exception list, make sure none of those apps are currently running, then try again. If you still have issues after that, then it's with S2U2, not the exception list.
Click to expand...
Click to collapse
Very well done.
Apparently Internet Explorer was still running, and as soon as I closed that it ticked off. May consider removing that key, as I don't see why I would need it.
Thanks.
CocheseUGA said:
Very well done.
Apparently Internet Explorer was still running, and as soon as I closed that it ticked off. May consider removing that key, as I don't see why I would need it.
Thanks.
Click to expand...
Click to collapse
Good deal, glad it worked for you....
when I install S2U2 (i go thru phases where I want it, then phases of "get it off my Tilt") the first thing I do is remove the exception for PIE.
FYI.... Likewise, if you run any of the Cube or TouchFlo variants out there, you will need to put an exception into the TouchFlo settings for S2U2. What happens if you don't is when you try to slide to unlock (or slide to answer) you end up invoking the Cube or TouchFlo, instead of S2U2. Just an FYI for you....
Thanks for the tip. Am still looking into wicked programs so far, only had it two weeks and it's already been through the mod ringer.
CocheseUGA said:
Thanks for the tip. Am still looking into wicked programs so far, only had it two weeks and it's already been through the mod ringer.
Click to expand...
Click to collapse
that's the way to do it. I've been using PPC devices for years and years and everytime I get a new one, I try every hack, reg edit, tweak, and app possible.
Hi all
Quick question from me. Is it possible to change the settings for the accelerometer in terms of sensitivity or time delay?? The reason i ask is that when using opera when i turn the phone to veiw it 'widescreen' the picture takes a good 8-10 seconds to flip change. Often i get bored of waiting so turn the phone ninety degrees again but as soon as i turn the handset portrait again the screen changes to landscape - quite annoying. I guess this may be down to slow response within the opera software??
any help would be much appreciated
Steve
I know this is an old thread, but I have the same problem with Opera and was not able to find a post regarding it. Anyone find a way to fix this speed?
Good post!! Please help
its a good question sitting on my mind for a few days...
I have another question about rotating..
is it possible to define that the window of sms will be automaticly turn to be on widescreen and locked?
So i can write sms only on wide screen without trying to make the screen rotate..
eranyanay said:
its a good question sitting on my mind for a few days...
I have another question about rotating..
is it possible to define that the window of sms will be automaticly turn to be on widescreen and locked?
So i can write sms only on wide screen without trying to make the screen rotate..
Click to expand...
Click to collapse
Don't know what you mean by locking the sms windows, but have a look at Gyrator for all your rotating needs
what i meant was...
that i hate writing in portrait mode (regular) because i have big fingers..
and since i dont like waiting minute or two till it rotates my screen...
It would be nice to have a window of sms and mail to be auto rotated to widescreen with no option to be on portrait mode.
eranyanay said:
that i hate writing in portrait mode (regular) because i have big fingers..
and since i dont like waiting minute or two till it rotates my screen...
Click to expand...
Click to collapse
I know what you meant and I also facing that problem too. I only need the landscape view when in SMS.
I did try on Gsen but don't know how to make it work. Maybe I should give a try to Gyrator.
Gsen is very simple
You just open the gsen config.
there you can define whatever you like.
better you just visit the thread of this app, its sticky..
there you can find all the explainations you need..
I have a solution for you, just was searching something similar and found this Gsen application. The BEST gsen for diamond Gsensor Utility (Flip_it) with landscape manila support, ThanX WildBerry Team
LINK FLIP IT
You can decide what application and how (0, 90, 180 or 270°)
I suggest you to install it
go to option:
1) Click on "add new application"
2) write tmail.exe
3) select 90° and 270°
and your sms will open only in landscape mode
bye bye
How do I disable screen rotation on my Touch Diamond, specifically when using Opera?
I've tried Gyrator 2 but to no avail.
Solution:
Not elegant but...
Change registry HKLM\Software\Opera\GSensor\IdleTime to a very large number like 1000000.
not 100% sure but try deleting the gsensor.lnk file in windows\startup folder
I saw in one of the threads that even the phone dialer screen rotates. This doesn't occur in my phone. Does this happen in your phones??
m3_07 said:
I saw in one of the threads that even the phone dialer screen rotates. This doesn't occur in my phone. Does this happen in your phones??
Click to expand...
Click to collapse
Not as standard - only Opera (and one other that I have forgot about) rotates. However if, like me, you use GSen then other apps (you can choose which) will rotate. My dialer screen rotates as does my TT6 for example.
Thanks!!
I read reviews on Gsen & Gyrator still having some teething problems in this same forum. I don't mind to wait further before things like these gets ironed out.
If you are aware of something that is error free so far, appreciate a lead.
Ive been looking for a solution for my IGO
peterc10 said:
Not as standard - only Opera (and one other that I have forgot about) rotates. However if, like me, you use GSen then other apps (you can choose which) will rotate. My dialer screen rotates as does my TT6 for example.
Click to expand...
Click to collapse
But couldnt find one.
I see you managed to auto-rotate your tomtom.
is that possible with the iGo8?
I've tried adding that line in the gsen config but it still doesnt work.
I have had no problem with Gsen and it works fine for me. I can't answer if it works with Igo because I don't use it, but it works with TTN6. Having said that if I turn a corner sharply at the same time as hitting a bump it goes back to portrait for a few seconds.
smazhster said:
How do I disable screen rotation on my Touch Diamond, specifically when using Opera?
Click to expand...
Click to collapse
just a guess, but are you browsing Opera / Photo Album whilst lying down in bed, perchance?
i'm having the same issue, it's really annoying, no idea why they couldn't have a settings menu to toggle auto / manual.
Dr J said:
just a guess, but are you browsing Opera / Photo Album whilst lying down in bed, perchance?
i'm having the same issue, it's really annoying, no idea why they couldn't have a settings menu to toggle auto / manual.
Click to expand...
Click to collapse
Yes. But sometimes it also happens if I am carrying it and accidently tilt it.
Solved.
Edited registry HKLM\Software\Opera\GSensor\IdleTime to a very large number like 1000000.
This auto rotating has been drving me mad. People all were suggesting gsen and other utilities but they all are awkward. In the end this simeple trick did it.
Like Apple was the first to get the touchscreen done right after 20 years of touchscreen history, Apple also did the auto-rotate right. With an iPhone/iPodTouch, it won't turn more than twice, so you can easily avoid unwanted rotation. Why Windows Mobile develops cannot figure out simple solutions like that?
Thanks for posting this fantastic workaround!
I saw this thread weeks ago but lost it and couldn't find it again despite my best efforts with the search function & google.
Here's a CAB for it (my 2nd ever!):
Thanks alot .d
just a little FYI - the cab doesn't work for me...the program (Opera) still auto rotates. I have tried the manual hack too.
Any more info?
just a little FYI - the cab doesn't work for me...the program (Opera) still auto rotates. I have tried the manual hack too.
Any more info?
EDIT: Granted I'm using Touch HD
Wiggz said:
just a little FYI - the cab doesn't work for me...the program (Opera) still auto rotates. I have tried the manual hack too.
Any more info?
EDIT: Granted I'm using Touch HD
Click to expand...
Click to collapse
Found the solution! I'm so happy. I'm done with this stupid automatic rotation:
The trick about HKLM\Software\Opera\GSensor\IdleTime need to be done but you also need to remove in HKCU\Software\HTC\HTCSENSOR\GSensor\WhiteList
the opera value.
I did the same for google maps and it works perfectly
I don't know about the rest but for HTC HD it's VERY SIMPLE!
HKCU\Software\HTC\HTCSENSOR\GSensor\AutoRotation = 0 (Default = 2)
My Problem was mostly with Dialer.No more screen rotation for me!
Davey101 said:
Thanks for posting this fantastic workaround!
I saw this thread weeks ago but lost it and couldn't find it again despite my best efforts with the search function & google.
Here's a CAB for it (my 2nd ever!):
Click to expand...
Click to collapse
thanks mate it worked with my touch hd.
you just need to install it in the same location in which you have installed opera.
HD Mini - Opera 10 Mobile autorotate disabled [solved]
Thanks Davey101. Your cab file works well with the HTC HD Mini to disable the annoying autorotate feature in Opera Mobile 10.
Anybody know if there is a cab or reg tweak I can apply to disable zooming in messaging when I hit the scroll wheel? I keep doing it by accident and it's really getting on my nerves.
Thanks!
Edit: Solved, see post #12 http://forum.xda-developers.com/showpost.php?p=4594396&postcount=12
I have this problem as well...really sucks.
Someone help? lol
haha, yah same here.
it gets annoying after a while...
I too would like a cab for that.
yeah i'm game for a solution...
maybe a quick reg hack or something. sometimes it goes haywire and i can't fix it unless i soft-reset.
omg this is driving me crazy!
is there a known fix for this f** functionality??
in for 1 too
i honestly don't see how this hasn't been addressed before?
I'm not sure if there is a better solution yet, but for now I have simply disabled SmartTouch entirely.
Grab a copy of FdcSoft TaskMgr, go to the Services tab and find the SmartTouch(SMT0) entry. Tap and hold, select Stop, then Set Manual, then Disable.
I don't use the scroll or zoom functionality for anything at all so this works for me. I found this info here: http://forum.xda-developers.com/showthread.php?t=462662
i dont think you would want to kill smarttouch all together. maybe just find and delete the registry entry for text messages. i think it is hklm\sofware\htc\smarttouch\outlook email. i dunno if thats really it but who knows.
elypsar said:
I'm not sure if there is a better solution yet, but for now I have simply disabled SmartTouch entirely.
Grab a copy of FdcSoft TaskMgr, go to the Services tab and find the SmartTouch(SMT0) entry. Tap and hold, select Stop, then Set Manual, then Disable.
I don't use the scroll or zoom functionality for anything at all so this works for me. I found this info here: http://forum.xda-developers.com/showthread.php?t=462662
Click to expand...
Click to collapse
dude...i dont care what anyone says about you. you are about the coolest person i know right now. this actually still allows me to use my zoom function in opera?
sho0z said:
dude...i dont care what anyone says about you. you are about the coolest person i know right now. this actually still allows me to use my zoom function in opera?
Click to expand...
Click to collapse
No, from what I can tell, it doesn't. I'm not going to test though because I finally did find a good solution.
After digging around the registry for a couple hours to no avail, I decided to start playing with programs that use SmartTouch. Lucky me I found one that disables zooming in SMS, is customizable, and doesn't mess up any other zooming functionality (ie: Opera). Yay!
My thanks to demosten for creating SensorScroll which can be found here:
http://forum.xda-developers.com/showthread.php?t=466377
Just install and soft reset. I had to play around with turning the service on/off (can be done from the start menu shortcut) and testing the zoom in SMS until I had the right size and zoom was disabled.
Hope this works for you!
Figured I'd throw this out here...
Problem: When I have my keyboard open and I select any text entry box, I then have to press a random key or spin the trackball to get the keyboard to light up. Since I often use the trackball to do this, I end up moving my cursor out of the textbox and have to reselect it
What I'd like to see: The phone seems like it is smart enough to know when a textbox entry is selected and then check to see if the keyboard is slid out. If these two conditions are met, light up the keyboard. Simple?
Can anyone here write a hack to do this?
I second this great idea!!!
thirded!
bump! 10ch
We need this I agree!
Yup exact same problem for me. Perhaps not a 'permanent' light up... Just increase the timeout to say.. 20 seconds
You should be able to choose that as a setting for timing, so you can have it on for as long as your keyboard is out or timed etc. would be very useful
slm3 said:
You should be able to choose that as a setting for timing, so you can have it on for as long as your keyboard is out or timed etc. would be very useful
Click to expand...
Click to collapse
umm personally i think it'd be better the way the other guy said it.the one where it it'll come back on when a textbox is selected. cause i tihnk if you just keep it lit up longer it'll waste more battery even though your not using the keyboard at the moment. (tho im not sure which wastes more battery, the setting for it to light up when it needed, or keeping it lit up longer)
either way, i'd love to see this feature too!
I've got the same problem myself, very good idea. I've just passed this onto cyanogen via twitter and his google code page.
NPerry said:
I've got the same problem myself, very good idea. I've just passed this onto cyanogen via twitter and his google code page.
Click to expand...
Click to collapse
did he reply?
I found this in case it helps anyone.
http://androidcommunity.com/forums/132643-post20.html
bomp bomp bomp