Parrot Carkit and Bluetooth - Tilt, TyTN II, MDA Vario III General

My TyTnll is a great device, but there's only one problem: I can pair it with the Parrot carkit integrated in my Kenwood Carsystem, but within 1 or 2 minutes after my first call my device disconnects. Then I have to switch my carsystem off and on again to establish a new connection. I've tried several ROM versions. Who recognizes this problem and who knows how to solve it ?

What model of Parrot are you using?
I have a 3100 and a change of firmware was all that was required.
See here http://forum.xda-developers.com/showthread.php?t=382212&highlight=parrot

I have the 3000 evolution and all ok. Just pair and that´s it. What is your model?
Regards

It should be a Pafrrot CK505X, but it could be modified because it's integrated in my Kenwood DNX5220BT Car system.

Related

Nokia Bluetooth Car kit with HP6315

I know this is for only XDA devices, & I tried searching but I didnt see anything except for 1 post. http://forum.xda-developers.com/viewtopic.php?t=11128&highlight=nokia+car+kit
But I thought I might try you guys here.
I have posted on other HP related sites as well for the same problem.
This site was so usefull when I had my Siemens SX56.
The only thing I wanted to know is if anyone knows if there is any add on driver I can add to it to make the hp6315 bond with my nokia bluetooth carkit model # CARK112.
I cant seem to get it to bond?
I did get my Jabra BT200 to bond and work correctly.
This is what nokia says about it?
*Compatible phones must support the Bluetooth 1.1 specification and Handsfree profile.
As far as I know the hp 6315 doesn't support handsfree only headset?
Any help would be greatly appreciated.
...have you tried the "explore a BT device" in the BT connection wizard, not the "handsfree/headset" set-up? I paired it together once & it worked fine...I do beleive this "widcomm stack of BT" supports handsfree...
BTW, after I added another headset (my SE HBH-65) it didn't connect again, but BT is funny/finicky doing multi-device connxns...
Nokia Carkit with HP6315??????
Thanks , I will try that I will let you know.
...another tip...even better tyhan the last one that I don't think is necessary if you use this one : when pairing h-set/handsfree device about half way thru the wizard hit the tools button (I think?) & it default-checks, "show only handsfree devices", uncheck that & you should now see the carkit show-up! This of course makes no sense since the carkit is a handsfree device but it seems to work so go with it...
thanks that did the trick!!!!!!
I just yest spent some extended time with CarKit (it in my wife's car) & it wasn't very reliable. After turning the car off & then back on it would not re-establish a pairing. After resetting both iPaq & carkit (turning off & on again, I'd go thru the wizard again & it would re-establish but would duplicate the carkit on the iPaq...
Has your kit been more reliable? (I have the nokia Cark112)
nokia car kit with ipaq
No. mine has been doing the same thing.
...ya, my work around has been to delete the previous carkit pairing & re-establish itself - a new one - obviously not great but workable if you need it...btw, every Nokia phone (even the newest ones) work fine with this kit...so who knows - I may get the Nokia 9500...

Problem Bluetooth Manager forgets paired devices

Hi all,
i recently upgraded my qtek 9090 to 1.42 (Tmobile posted BA_TMNL_14200_115_11300_Ship). I have major problems connecting to my handsfree set in my car. The first try to connect is successfull. I can pair with the handsfree device, enter the security code and everything is fine. The device appears in bluetooth manager under paired devices.
After disonnecting the paired devices rapidly gets lost. After that, theres no chance to connect to the device again. The only chance is to delete the bluetooth device in the manager and pair it again.
Despite to this, if have no problems with my gps mouse. Security is disabled, the device also don't appears in paired devices
Has anyone an idea ?
BT Version is 1.0.0 3900
I think I found the problem. Seems, that my handsfree set in my car still had the connect information of the former installation and I still use the same name for bluetooth. The handsfree set can save the connect information of 3 devices and two of them had now the same name but different id's. Seems, that was the problem. I'll test it for some days, but I'm sure, that was the solution
have fun
BT headset is paired but gets lost
my MDAIII has just been updated to the latest Tmobile upgrade.
Everything works ok. BT headset pairs and when i make a call i can speak. But when i receive a call the connection with the headset has a '?'
Now i first have to search to get a connection.
It's like it switches off the BT Headset connection when I receive a call.
Does anyone know how to solve this?

Connecting to bluetooth car kit takes very long!

Hi,
my Diamond works ok with my Parrot bluetooth car kit. The only thing that is really anoying me, it takes veeeery long until the Diamond has established the connection to the car kit. I have to drive for several minutes! until the Diamond connects. Before I had a Sony Ericcson phone where I did not have this problem.
Any ideas? Is this just because the Diamond is a WM phone?? Or is there a way to improve this?
Thanks
I use my diamond with a Parrot CK3300 - not sure if that is the same as yours. I only use it for handsfree since I use the Diamond's own GPS receiver. I don't have this problem - it picks up and pairs within seconds.
Have you flashed the Parrot with the latest software? I found that improved performance considerably - automatic update of contacts, user name on screen rather than phone name etc.
I use the Parrot CK3100 and the pick is almost instant; I've barely got in the car and started it up and the Parrot has picked up my Diamond. It was just as quick on my Hermes device too.
I also have a CK3100 and here's somewhat the same problem.
It connects in a few seconds, and it's usable.
But the synchronisation takes forever.....
That doesn't bother me, becouse I'm quite long in my car when driving to work...
But:
The phonebook in my CK3100 starts with the numbers wich are saved on the SIMcard.
All my friends are saved on the internal memory of the TD.
So if i want to call 'Anouk': I press 'A' on the CK3100.
It starts with the 'A' from the SIMcard.
Then I have to use the turning wheel, to scroll BACKwards to "anouk'!
So this takes a lot of time.... and is very, very unpracticle.
Someone a solution for this?
As I said before flashing the latest software onto my Parrot made it much better for syncing contacts. But I only need do it once - after that it only checks for changes. It should not be syncing each time because the Parrot should store the contacts itself.
Yep, just check the Parrot website to see what the latest update is for your particular BT device and try applying it. Saying that, I've not updated my one from factory.
Unfortunately I was not able to update my Parrot so far. I have only a CK3000 Evolution, Firmware version 5.08C. I guess I would need this special serial flash cable...
@ swissly
i have the same problems fw months ago. you have to delete the partnership's on your CK3000. press the red and the green button for more the 3 sec. (Erasing in progress) if this is done you can create a new partnership. hope that helps.
\\yoshi
swissly said:
Hi,
my Diamond works ok with my Parrot bluetooth car kit. The only thing that is really anoying me, it takes veeeery long until the Diamond has established the connection to the car kit. I have to drive for several minutes! until the Diamond connects. Before I had a Sony Ericcson phone where I did not have this problem.
Any ideas? Is this just because the Diamond is a WM phone?? Or is there a way to improve this?
Thanks
Click to expand...
Click to collapse
Hello
For all of you who have a Parrot Bluetooth car kit listen up:
When you use any phone with any Parrot Bluetooth car kits please go to the Parrot support website to flash your car kit - http://www.parrot.com/uk/support/onlinehelpguides
This will update the device with the latest firmware and as Parrot continuly add new phones to their list it is must. I did it as soon as my HTC Diamond arrived and finds it pairs/syncs within 1 - 3 seconds of switching the car on. FYI I have a Parrot MK6100 device, which supports A2DP Bluetooth audio and is mint. Previous to this I had an SPV M700 and a Parrot CK3100-something, but same thing - update it and you will find it solves the problem(s).
- PLEASE HOWEVER READ THE INSTRUCTIONS ON FLASHING - IT AIN'T HARD BUT READ IT ANYWAY!!! -
Please correct me if I'm wrong, but I still think I CANNOT UPDATE my Parrot CK3000 Evolution WITHOUT THE PARROT SERIAL CABLE!
swissly said:
Please correct me if I'm wrong, but I still think I CANNOT UPDATE my Parrot CK3000 Evolution WITHOUT THE PARROT SERIAL CABLE!
Click to expand...
Click to collapse
You are correct AFAIK. Most other Parrots can be updated easily using bluetooth, but not that one. Probably why it was cheaper than the others.

Bluetooth Car Kit Problems

I have experienced few irritating problems with my Diamond when used in my Seat Leon 2008's stock head unit via bluetooth:
1. Phonebook is displayed always and I can call phones from there which is OK, however "Incoming Calls", "Outgoing Calls" and "Missed Calls" are not working always: sometimes I have those lists filled with the corresponding entries, sometimes all three lists are empty.
2. When I am running iGO8, the bluetooth connection gets connected and disconnected each 5 minutes or so.
3. The headset volume is really low. I didn't have that problem with my Sony Ericsson phones before.
Does anyone have any of those problems and know a solution for them?
Only thing i can say. Stock seat bluetooth is terrible. My brother has orderd a new seat and the dealer advised to choose for the pioneer mounted radio because of the known problems with the seat unit and the bluetooth functions of it.
try posting in the Accesories section, u might get more help.
marco899 said:
Only thing i can say. Stock seat bluetooth is terrible. My brother has orderd a new seat and the dealer advised to choose for the pioneer mounted radio because of the known problems with the seat unit and the bluetooth functions of it.
Click to expand...
Click to collapse
Pioneer isn't that good either, I had the Pioneer radio with Bluetooth and I couldn't get it running with my previous phone Trinity P3600 and with my Diamond it didn't work either.
Willem
I have used the stock head unit previously with simple mobile phones and it has always worked perfectly and I was very happy with the bluetooth implementation in Seat. So, I think the problem is not in the head unit (i.e. an accessory problem) but lies somewhere in the "phonebook through bluetooth" implementation in the Diamond.
Hello,
I have the same problem. I have a Skoda Octavia II (2007) with built-in bluetooth and a Diamond (ROM 2.03).
I use the iGO8, and it works fine, but the bluetooth connects and disconnects randomly in all ~5 minutes. When I shut down the iGO8 or when it runs on the background, the bluetooth works perfectly, when it runs in the foreground, the bluetooth disconnects again...
Who knows wat is this problem? Should I try a new ROM? A new radio version? A new iGO version?
CyberGene: Have you a solution for this problem? Or you use a different iGO8 or a different navi software?
Thanks,
DuckHead_
Unfortunately I didn't find any solution to the problem. To be honest, I am currently using a SonyEricsson phone and the Diamond is used by my girlfriend. We are still using iGo from within the Diamond but with no Bluetooth activated.
Thank you for the quick answer.
Why don't you just take your car into a car audio place and get them to check it out for you
I thought it so that the problem with Diamond. The BT does not work only if running the iGO...

[Q] Bluetooth Carkit Issues :(

Please only repond to this if you have solved carkit issues.
I have a JVC AVX33 headunit with bluetooth, worked perfect on my old SE K800i, however on my diamond it keeps "booting" the bluetooth connection.
Connects for 30 seconds, looses connection, and connects again.
Is there a possible fix for this?
New Bluetooth Stack?
Tweak?
Or an explanation to why this is happening?
It Renders my Diamond useless in my car setup, and this would meen the world to me to have fixed.
Would purchasing a PARROT bluetooth carkit solve the problem?
Do you search the carkit with the phone or vice versa let the carkit search the phone?
I would recommend to test both setups. Do not forget to make your phone visible for the carkit when you want to pair it. Are you able to enter the bluetooth pair code on the phone when requested?
Hi, i have a Pioneer deh-p9800bt with bluetooth handsfree function and the only way to use it with wm6 and 6.1 (Htc Jamin, Gsmart i120 and Gsmart T600) has been to install Jetware HandsFree Extension. With the Gsmarts the Pioneer connects automatically and all works perfectly, with the Diamond the connection must be started every time from the Pioneer, but, then, all works (also battery and signal level): i think that a registry tweak has to be made in order to have an automatic connection.. i will try to see the differences between the registry settings of the i120 and the Diamond..
Yes i tried pairing both ways phone -> headunit and visa versa, and i am able to pair the two devices with code. However it keeps booting the bluetooth, looses connection and then getting it again. About every 30 seconds.
And i tried JETware yesterday without any change, however i am going through the different JETware config add-ons today to see if the result is better.
I think that its when the phone is trying to update the contact list to the headunit, it crashes the bluetooth. Anybody know if it is possible to change the bluetooth stack driver with another? on the HTC Touch Dual i had previous the bluetooth worked just fine.
bump bump bump

Categories

Resources