This makes your TILT/Kaiser into a wi fi router!
Hello I got this information from
XDA - I just changed some info to make it work for the TILT/Kaiser , also couldn’t get the screenshots in my post sorry, didn’t know how to..just check out the link and use the following date :
**** You have to change the registry value for the TILT, use TNETW12511, on the website above they give the values for different wm6 phones, for the tilt/kaiser use the value i gave and as follows...You can just read the steps on the website above but Use the value i have stated - TNETW12511
Do the following:
1) Open Settings->Internet Sharing. Enable IS for Bluetooth PAN. (Remember this is Internet connection sharing ( IntShrUI.exe which is found in /windows directory)
2) Change HKLM\Comm\ConnectionSharing\PrivateInterface to "TNETW12511" (it should currently be "BTPAN1" .
3) Open Settings-> Connections -> Wi-Fi. Select Network Adapters tab. Click IEEE 802.11b/g Compatible Wi-Fi.
4) Enter IP address 192.168.1.1 and subnet mask 255.255.255.0. Click OK.
5) Select Wireless tab. Add New.. to add the Network name for your ad-hoc network (I prefer "adhoc"
6) Set the client computer to use the same ad-hoc network***. Client will receive an IP address from the device (don't need to manually set the IP).
And it works!
*** Edit Just learned that in step one you can choose USB but you still have to change the reg edit to TNETW12511 manually or by the file attaches. Selecting usb saves battery by keeping bluetooth off and just uses wifi. But if you select usb you cannot connect your computer for activesync
I copied what was on the xda website below but the pics did now show, sorry.-
Another long-awaited breakthrough: dial-up Internet Sharing over Wi-Fi!
Anyone having read my tutorial on the new Internet Sharing utility in Windows Mobile 5 AKU3 and later versions (including, of course, WM6) knows that it’s not possible to use a Windows Mobile device as a GPRS / EDGE / UMTS / HSDPA etc. cellular modem via Wi-Fi, Bluetooth DUN or, with some exceptions, even infrared, “only” over BT PAN and USB. This means a lot of devices can’t connect to the Net if they don’t support either BT PAN (or USB with desktop Windows operating systems). While the BT DUN hack published some months ago certainly helped the situation (allowing for connections via the far more widely supported, “traditional” Bluetooth DUN), it still didn’t let for using the Windows Mobile Phone Edition (“Professional” in WM6 parlance) device as a modem with clients connecting via Wi-Fi.
XDA-Developers hacker fluxist has just published a tutorial on his latest finding, which, at last, allows for accessing the Net using a Windows Mobile device via Wi-Fi.
The results are as follows:
1. Start Programs / Internet Sharing. (Remember this is Internet connection sharing ( IntShrUI.exe which is found in /windows directory) Enable the sharing for Bluetooth PAN (NOT USB!) using Connect (left softkey). If you’re prompted for enabling Bluetooth visibility, close the dialog box as usual by pressing OK.
2. Start editing the Registry with a registry editor and change HKLM\Comm\ ConnectionSharing\ PrivateInterface (which is, by default, "BTPAN1" to the internal name of your Wi-Fi adapter. It’s "TNETW12511" with the TILT *** read below about attached .reg file
Note that I’ve made one registry import file available (see attached), should you want to be able to quickly change the Registry values, without the need for manually editing the Registry every time you start the Internet Sharing applet. To make your life easier, just put it in the file system of your Pocket PC and click it after starting and connecting Internet Sharing so that it’s automatically imported. Should you need a RegEdit 5-compliant Registry Editor for your handheld, I recommend Resco File Explorer .
3. Go to Settings / Connections / Wi-Fi and select the Network Adapters tab (it’s the default and only visible one when the Wi-Fi unit is disabled). Click the name of the Wi-Fi card (“IEEE 802.11b/g Compatible Wi-Fi” on the HTC Tilt. ) Enable “Use specific IP address” and enter the IP address 192.168.1.1 into the first field (“IP address”). When you click the second row (“Subnet mask”), it’ll auto-fill 255.255.255.0. Just keep it at that. This is shown in the following screenshot:
4. From now on, you go on as with adding a p2p network (see THIS for my earlier article if interested – reading it is not needed for completing this tutorial): click “Add new…” on the Wireless tab:
Enter a network name (it can be anything; in here, it’s “WRadhoc”) and make sure you check in “This is a device-to-device (ad-hoc) connection”:***
After clicking Next, you can set up whether you need encryption or not. If not, just set “Data encryption” to “Disabled” as can be seen in the following screenshot:
Note that you can use both WPA and WEP for encryption. I don’t discuss setting this up as only one client will be able to connect to your Windows Mobile device at a time – while it’s connected, there surely won’t be other clients connected to it. And, after you’ve ended your Net session, when you close Internet Sharing and/or disable Wi-Fi, no one will be able to connect any more either. That is, it's MUCH safer than traditional access points without any kind of encryption.
Finally, in the list of the available connections, tap-and-hold the just added network and select “Connect” from the context menu
*** Edit Just learned that in step one you can choose USB but you still have to change the reg edit to TNETW12511 manually or by the file attaches. Selecting usb saves battery by keeping bluetooth off and just uses wifi. But if you select usb you cannot connect your computer for activesync
Not to be a debbie downer, but to technically use tethering on say an AT&T contract you are supposed to have an additional service added on to your account, correct? If you do not you could potentially be charged per each kilobyte. Any idea if they can (or do) detect you are using your laptop/desktop and not the phone itself?
they have no possible way to tell weather you are using the right plan to teather.. yet....
i havent heard of anyone who got caught yet, at least not on the forum..
ATT does say that people do get caught though... lol.. i believe it to be a lie.
the only way they can tell is by physically looking at you bill and usage. Lucily att is to bueracratic to do that, but they could if they wanted to
stevenSZ said:
Not to be a debbie downer, but to technically use tethering on say an AT&T contract you are supposed to have an additional service added on to your account, correct? If you do not you could potentially be charged per each kilobyte. Any idea if they can (or do) detect you are using your laptop/desktop and not the phone itself?
Click to expand...
Click to collapse
@ StevenSZ: Go back to Hofo! If anyone has read there lately it seems like half the threads are the media plan police. And who said anyone on XDA would "steal" from ATT anyway, are you saying XDA people lack morals.
On the real topic: that is cool but how slow is it as that seems to be a complaint in that original thread. Anyway for me the Internet Sharing Wizard with USB or BT works great so I dont care about sharing GSM through Wifi.
You are my new best freind. Now if you could get this to work for the hermes.........
wpbear said:
@ StevenSZ: Go back to Hofo! If anyone has read there lately it seems like half the threads are the media plan police. And who said anyone on XDA would "steal" from ATT anyway, are you saying XDA people lack morals.
On the real topic: that is cool but how slow is it as that seems to be a complaint in that original thread. Anyway for me the Internet Sharing Wizard with USB or BT works great so I dont care about sharing GSM through Wifi.
Click to expand...
Click to collapse
No idea what Hofo is but you need to step away from the keyboard for a few minutes and relax. I've read through a lot of the threads and I have not seen much talk relating back to something that can be considered plan policing, so I definitely think your numbers are way off. I asked a question and didn't suggest anything in my post, but I will say that I am 100% positive that a percentage on here will do it without the appropriate plan.
Now is your last statement a question? They usually end with question marks. Anyway, I didn't mention stealing did I? I am trying to make sure that if there is detection that people might be aware they could be charge for the KB they used... it's doing people a favor (some people might not even realize tethering is additional.. you know?). Judging by the number of threads here with cracked software (that means illegal - is that moral?) I would certainly say 100% there are people that might fit your description. Anyway, I appreciate the other reply above that actually went towards helping/answering my question and not just wasting time. Thanks. ;-)
Got it working on my tilt this evening.. very nice! I do wish there was a way to add a WEP key along with it for security, i dont want someone stealing my bandwidth!
Also it appears the network adaptor shuts off the wireless connection when the device goes to sleep.. any way to stop this from happening??
You can add security, after you pick your network name click next then do Authentication: open Encryption:wep or whatever and type in a key. YES it does stop when the phone sleeps. I have no idea why but I also want to know how to get this to stop.
oozijk said:
You can add security, after you pick your network name click next then do Authenticationpen Encryption:wep or whatever and type in a key. YES it does stop when the phone sleeps. I have no idea why but I also want to know how to get this to stop.
Click to expand...
Click to collapse
I would highly recommend doing this too. While abuse is not very prevalent, it is a pretty big security hole to leave your laptop or PDA/phone-device in an open ad-hoc mode. The little inconvenience will be worth it. Also, try clear it out of your laptop when you are finished as Windows has a tendency to keep trying to broadcast itself as an ad-hoc network even when you are done.
Keep wifi from disconnecting
This will edit the registry as well as keep the connection alive! this should also fix your dropouts. I'm new here so I don't know how to upload anything so I can't upload the script but basically here are the instructions.
Download and install MortScript
here's a more direct link http://www.sto-helit.de/index.php?mo...=view&entry=65
http://www.pocketpcfreewares.com/en/index.php?soft=1448
(if the link doesn't work goto www.pocketpcfreeware.com and search for mortscript)
copy paste this script to notepad and save as KeepSharing.mscr (notice the extention this lets mortscript recognise as a script):
RegWriteString "HKLM", "\Comm\ConnectionSharing", "PrivateInterface", "TIACXWLN1"
While ( wndExists( "Internet Sharing" ))
If regKeyEqualsDWord "HKLM", "\Comm\InternetSharing\Status", "Enabled", 0
SendLeftSoft ( "Internet Sharing" )
EndIf
EndWhile
transfer to ppc phone.
steps to use it:
turn off wifi
click on internet sharing
(you can use either usb or bluetooth doesn't matter which)
click on connect
this will establish data connection
run the script by clicking on the script file
(this will edit the registry once then it sends connects by sending left softkey whenever it detects a disconnect)
now turn on wifi
(if this is not done last the connected clients won't connect properly to the internet)
end of steps enjoy! *by the way, if you copy any script directly to the start menu it gets treated as a program which you can map to a button or to an app launcher
SCRIPT IS ALSO ATTACHED with program
oozijk said:
This will edit the registry as well as keep the connection alive! this should also fix your dropouts. I'm new here so I don't know how to upload anything so I can't upload the script but basically here are the instructions.
Download and install MortScript
here's a more direct link http://www.sto-helit.de/index.php?mo...=view&entry=65
http://www.pocketpcfreewares.com/en/index.php?soft=1448
(if the link doesn't work goto www.pocketpcfreeware.com and search for mortscript)
copy paste this script to notepad and save as KeepSharing.mscr (notice the extention this lets mortscript recognise as a script):
RegWriteString "HKLM", "\Comm\ConnectionSharing", "PrivateInterface", "TIACXWLN1"
While ( wndExists( "Internet Sharing" ))
If regKeyEqualsDWord "HKLM", "\Comm\InternetSharing\Status", "Enabled", 0
SendLeftSoft ( "Internet Sharing" )
EndIf
EndWhile
transfer to ppc phone.
steps to use it:
turn off wifi
click on internet sharing
(you can use either usb or bluetooth doesn't matter which)
click on connect
this will establish data connection
run the script by clicking on the script file
(this will edit the registry once then it sends connects by sending left softkey whenever it detects a disconnect)
now turn on wifi
(if this is not done last the connected clients won't connect properly to the internet)
end of steps enjoy! *by the way, if you copy any script directly to the start menu it gets treated as a program which you can map to a button or to an app launcher
SCRIPT IS ALSO ATTACHED with program
Click to expand...
Click to collapse
Thanks I will check into this tomorrow as its a little late here... I will also look into the encryption settings as well.
I've followed the instructions verbatim, but my new adhoc network on my phone just shows "connecting" forever, and never actually connects. Any advice?
Thanks.
its going to say connecting until you connect to your phone from your computer....SO lets say you named ur adhoc network "tilt wifi", from your computer search for wireless networks and connect to "tilt wifi"..and it will now say connected on your phone and now your phone is a wireless router
New Script that starts ICS and does the wifi reg edit when you start it.
Hey everyone, this is a new script that will start ICS and do the reg edit automatically when you start it. Then just start wifi and connect to the network you make on your phone...This basically saves you one step as it starts ics and does a reg edit in one.
- ( you still have to keep this changed tho - Open Settings-> Connections -> Wi-Fi. Select Network Adapters tab. Click IEEE 802.11b/g Compatible Wi-Fi.
4) Enter IP address 192.168.1.1 and subnet mask 255.255.255.0. Click OK. )
so.. can somewone be cool and nice enough to make this script into a program?
We have a wifi program now for the TILT!!
TurboX2 said:
so.. can somewone be cool and nice enough to make this script into a program?
Click to expand...
Click to collapse
Now we have a program
Fantastic programme!
First post on this forum.
Just a few queries:
I can happily browse over wifi from my laptop and N95
But I can't manage to connect an iphone or ipod touch. It is possible that these devices do not allow browsing over an ad hoc connection-any way round this?
The connection drains the kaiser battery very quickly-I'll try adjusting the Kaisers power settings.
The USB connection did work for browsing but now does not. Even when the wifi programme is not running. When the Kaiser is short of batteries I have tried connecting via USB to charge the phone but this knocks off the wifi connection but still the USB networking connection does not work.
Otherwise nice piece of work. Thank you.
Please also make sure you post a link to your thread to the original thread so that all non-XDA-Dev users also find this thread (I've linked to the original thread from several of my articles also cross-posted to other boards and mags)
Wifi router, version 0.6
New version 0.6 attached
http://forum.xda-developers.com/showthread.php?t=341398
this works ...
This way to connect to wifi worked for me too.
However I would like to know what advantage you get in connecting to internet using this approach wrt connecting thorugh bluethooth or USB.
I want to be able to connect my tmobile usa kaiser to my notebook and use the net. Someone please help me... Im stuck in the middle of no where with no other way to access the net...
Hi,
The way I do it uses ActiveSync 4.5.
On AS 4.5 on the PC go into connection settings and uncheck/turn off "allow USB connections". That way AS won't try to start syncing.
Connect the Kaiser.
Launch 'Internet Sharing" on the Kaiser.
PC Connection should read USB.
Network Connection should read your choice of internet/network connection.
Click connect down the bottom left and you should get a connection...
flickster99
no connection...
do a search for WMWifirouter.cab. Works great for tethering
van131 said:
I want to be able to connect my tmobile usa kaiser to my notebook and use the net. Someone please help me... Im stuck in the middle of no where with no other way to access the net...
Click to expand...
Click to collapse
This forum (and other Forums) are littered with instructions. Just takes a little diligence and reading to piece it all together. Previous poster is right, if you have WiFi on your laptop then you should try WMWifiRouter.
If you prefer ICS then here's the little that I know - might help you get started. So I'm assuming here that when you say "tethering" you're talking about ICS and not using your phone as a USB modem. Are you on a stock T-Mobile WM6 ROM or a cooked ROM? If you're on a cooked ROM you probably already have ICS available. Do you have any shortcuts in your programs for Internet Connection Sharing (ICS)? How about in your Comm Manager - anything to turn it on / off? If no, then you'll need to browse your file system on the device and find the file \Windows\IntShrUI.exe. That's the one you need to start ICS.
If you don't have it you can try installing from the attached files. No guarantees, but it might do the job for you.
Shouldn't need to do any other configuring on your phone, like disabling advanced USB options from connection settings. Also you shouldn't need to disable or change anything in Activesync on the PC, like disabling your USB connection. Once you start ICS select your connection (go with USB, it's easier and requires no setup). Choose your network connection. Click connect. Plug in your USB cable.
You're PC should add a new network connection, you'll get a new IP address for that connection (I think something like 192.168.x.x). Then you should be able to browse the internet.
hotmail said:
This forum (and other Forums) are littered with instructions. Just takes a little diligence and reading to piece it all together. Previous poster is right, if you have WiFi on your laptop then you should try WMWifiRouter.
If you prefer ICS then here's the little that I know - might help you get started. So I'm assuming here that when you say "tethering" you're talking about ICS and not using your phone as a USB modem. Are you on a stock T-Mobile WM6 ROM or a cooked ROM? If you're on a cooked ROM you probably already have ICS available. Do you have any shortcuts in your programs for Internet Connection Sharing (ICS)? How about in your Comm Manager - anything to turn it on / off? If no, then you'll need to browse your file system on the device and find the file \Windows\IntShrUI.exe. That's the one you need to start ICS.
If you don't have it you can try installing from the attached files. No guarantees, but it might do the job for you.
Shouldn't need to do any other configuring on your phone, like disabling advanced USB options from connection settings. Also you shouldn't need to disable or change anything in Activesync on the PC, like disabling your USB connection. Once you start ICS select your connection (go with USB, it's easier and requires no setup). Choose your network connection. Click connect. Plug in your USB cable.
You're PC should add a new network connection, you'll get a new IP address for that connection (I think something like 192.168.x.x). Then you should be able to browse the internet.
Attached Files
File Type: cab Chainfire's Internet Connection Sharing ICS.CAB (174.1 KB)
File Type: cab Kin0kin's Internet Connection Sharing ICS.cab (175.2 KB)
File Type: cab Shamanix Internet Connection Sharing ICS.cab (39.8 KB)
Click to expand...
Click to collapse
I was trying to get this work on a Verizon Ozone, which definitely did not have the ICS component. In addition to the three files mentioned in the post above (installed first in the order listed) I needed to also get the IPDrivers CAB file from the author of WMWiFiRouter. I simply used the contact form on that website and mentioned trouble with Internet Connection Sharing (ICS). It sent an automated reply (about 12 hours later) that contained the file. So then I installed it, and then finally installed WMWiFiRouter. I found that the install order was important! I found that inspecting the WMWiFiRouter log file (under TOOLs in the menu) was helpful in figuring things out. I knew i had it right went there were no more FAILures in the log. Even then it did not work and I discovered that my WEP encryption key was not the recommended 5 or 13 characters and it had made its own longer key, which of course did not match what I used the system that was trying to use the WiFi. Once I put in a 13 character key, everything works just fine! I also found that I did NOT need to run the ICS manually, so don't bother messing around with it. WMWiFiRouter knows that it is there and uses it transparently.
Can you upload all the files you used??i also have the ozone
Hi,
I sent back my first orange TYTN II because their GPRS internet kept connecting everytime I turned on the phone and also every so often for no reason (little connecting icon at the top of the screen kept coming on and the timer started to count). The lady on the phone told me it is meant to do that on PDA phones to speed up accessing the internet explorer and using the internet, after a week of phone calls lol but i'm not sure about this as a guy in an orange shop told me their's doesnt do that. I ordered mine online. Also if this was the case I wouldn't know how long I would be using their GPRS for? lol. Maybe its only an orange thing. I don't know this is my first PDA phone. I told them to disable Orange internet completely from my phone which they did but it still tried to connect and failed lol. I couldn't see any application trying to access the internet etc.
I recieved a new TYTN II after a lot of hassle. Everything seems to be working fine. The problem is now the "Data Connection Button" in the Communication manager doesn't come on at all and I am not sure whether it is suppost to or not. I gather this button is meant to turn off all data connections in one go. Does this include WanLan Wifi? as it doesn't come on when i active this. I cant try the orange internet again because i told them to disable it. I am thinking to call them up to re-enable this but i was just wondering if there is any point in doing this and if there is any point in this button apart from closing connections.
Another question I would like to ask is why when I go into my SMS messages and click on one to read does the scrollbar start at the bottom of the page. i have to scroll up to actually read the message which is annoying. Is there a setting for this? ><
Help appreciated thanks. ^_^
I doubt a faulty device was the reason for the GPRS connection. There are several things on the device that have auto update features. Siome of the things that can cause this are: WLM, HTC Home (Weather Page), Quick GPS, etc...
As for the Data Switch in Comm manager, that is only for data, 3G, GPRS, etc... There is a WIFI/WLAN switch in most kaiser models as well.
Unless you close all the way out of the email app, (end program, x-button) it will open where it last was. Selecting a method other than "Recieved" such as "From" or "Subject" can also cause the device to open if different positions.
Thanks for the reply GSLEON3,
I couldn't find any reason for why the GPRS was automatically connecting when I turned on my phone. I didn’t have any weather etc, it was doing it after I hard reset also. I noticed that it did it every time I turned on my phone however if I used my old sim card before they disabled it for the upgrade it started to do it randomly which was odd. Well it doesn’t do it on my new one so I guess I’m happy. Maybe it was the quick GPS ill never know now. I have installed the HTC home interface because I hate all the orange crap they put onto the phone.
“As for the Data Switch in Comm manager, that is only for data, 3G, GPRS, etc...” just to turn off these data connections? Or does this button speed things up or do something else when it is activated? Ah yes how silly of me about the Wifi. I was just wondering why my data connections button wasnt coming on and really i just want some kind of method for testing it apart from GPRS (dont have provider's GPRS activate) and 3G (video calls? do they come out of my minutes?). I'm confused.
When I click the little SMS button which is located more or less in the center of the home screen above the shortcut tabs it goes to the messages page. On this page I have the Inbox filter selected on the top left and the Received filter selected on the top right. At the moment I have 73 SMS messages going down in a list. When I click any of these to read them including newly received items which go to the top of the list I cannot read the actual message until I scroll up using the scrollbar. I have tried to play around with menus etc to see if it holds the position in memory but I have had no luck in making the bar stay at the top.
If I click the top left button and then click Today to go to the home screen the SMS application automatically closes anyway so it wont open where I last was or keep anything in memory. I think this is what you are saying to do. If I open to read any message and then go out to the list of SMS's it wont remember the scrollbar was last at the top when reading the message so keeping the application in memory will have no use as it resets to the bottom as I enter to read any message. I hope this is clear, sorry if it is long-winded.
Many Thanks
Nevermind I have found out why the message bar keeps going to the bottom in the SMS page. Its because of the "D-Pad Scroll Navigation" in the Kaiser Tweak application.
I will just assume that the data connection button is not required and not worry about it i think. Can't find any information about it.
thanks.
Having decided last weekend that my Kaiser was way too fast, I loaded it up with bloatware.TouchFlo,HTC Cube,6 Tab Home Plugin,New HTC Default Theme,Audio Manager, Home Customizer,Comm Manager and Kaiser Tweaks. Most of it I loaded as .cabs or .zip thru Missing Sync for Mac. I also downloaded Windows Live Services and set up push email for my @live account. Everything works great except the phone now spontaneously connect to MediaNet (Edge) all day for no reason. The connection is not followed by email or anything else, it just connects. When I check Task Manager 95% of the time Activesync is running but not always. Have set Activesync from " as they arrive" to manual. The phone still connects for no reason. The notification that the phone is connecting comes up , I press cancel, right away it tries to connect again and again and again, then stops and five minutes later it will connect again. I know this is long but I know how you all like enough info.Any thoughts on causes or solutions?
The phone is doing what AT&T (or your phone service) told it to do - constantly make sure that you have a connection to them. This will drain your battery somewhat. What you want is that it should DROP all connections unless you TELL it to connect.
I think that you want to search for Kaiser Tweak -(oh wait! you already have that program) you will notice that you can make the phone connect only when you have told it to - i.e. make an internaet connection or check email. You can have the phone drop the connection one minute after that.
Have you actually used the Kaiser Tweak program? If not you should use it first/next.
I believe that this will most likely solve your problem if I have understood it correctly.
(PS - I recommend that you use the SEARCH at the top of the forum before posting next time.)
Bill
denco7 said:
Having decided ...Any thoughts on causes or solutions?
Click to expand...
Click to collapse
Thanks Bill...... Already went thru Kaiser Tweaks and set every single setting to advised setting. Set all the connection settings to connect manually and to drop the connection after one minute. It wil not do either.Google is my friend. I have google searched this forum and have used forum search. In the past two days Mon. and Tues. I have read thru more than 2000 posts and wikis before I decided to start a new thread if I have missed something I am Sorry and would have appreciated a link to this information that I have missed. I have had the phone since last Nov. and have been pretty faithful in reading this and the HTC wiki and forum and cannot figure this out.
Sorry again, Denco
HI
My kaiser wont ring while charging, is it something to do with radio? or can it be fixed?
Thanks
Activesync Settings
Look at the settings for Activesync on your PC. When first connecting your device Activesync asks you several questions, one of which is whether or not to allow wireless connections while the device is connected. This night be the problem. When trying
As I have a Dutch version of both the TyTN II and of Active Sync the exact location of the menu is a guess but, try opening up active sync and go to the File menu. Under that one should be a line saying something like Connection Settings or Connection Properties
Good Luck
/Edit
Strike that. That did not change a single thing over on this side. Besides, it is unclear whether you mean the phone making noise or making a GPRS connection