I bought a new Qtek 9100 G3 version.It was in German.I decided to install a new English rom.I flashed it successfully but after flashing the new OS boots very slowly. Also the battery does not charge. The battery icon on the main screen shows a " ! " exclamatery sign over it. I figured that its the wrong rom. Now if I try to flash other roms I am not able to do so. All these errors like Invalid update utility,File open,File read error pops up. However I managed to flash one rom but its of no use because even after flashing the old rom loads... Please help me soon as I am not even able to charge my wizard nor able flash a new rom. Also my pc does not detect my wizard when connected through USB nor will active sync. However i can connect through usb in boot mode... please help me guys.....
Flash the original Qtek 9100 ROM.
As soon as the device is not a real brick. The device can always charge when it is powered off.
Related
Hello all,
first let me apologize for the long post, and my noobiness. I'm new to the smartphone world, I've sucessfully flashed my Kaiser (from work). Also, I would like to thank everyone who is cooking!
I have the HTC Mteor, which I'm trying to Flash to WM6.1.
When I got it (used), I did a hard reset, and it went back to WM5 in Russian.
I believe I successfully unlocked it, and can now get to the tri-color screen.
It reads:
BBEE100
IPL-0.90
BREE100
SPL-2.05
Every ROM (including the original from HTC) opens, forces the phone to the tri-color screen, and then dies. Error 260, 262, etc.
I've searched the forums, and read that the SPL should be 1.10, but I can't get that to install either.
Any help/suggestions?
Thanks,
Jeff
jjmorris100 said:
Hello all,
first let me apologize for the long post, and my noobiness. I'm new to the smartphone world, I've sucessfully flashed my Kaiser (from work). Also, I would like to thank everyone who is cooking!
I have the HTC Mteor, which I'm trying to Flash to WM6.1.
When I got it (used), I did a hard reset, and it went back to WM5 in Russian.
I believe I successfully unlocked it, and can now get to the tri-color screen.
It reads:
BBEE100
IPL-0.90
BREE100
SPL-2.05
Every ROM (including the original from HTC) opens, forces the phone to the tri-color screen, and then dies. Error 260, 262, etc.
I've searched the forums, and read that the SPL should be 1.10, but I can't get that to install either.
Any help/suggestions?
Thanks,
Jeff
Click to expand...
Click to collapse
install this official rom from HTC
http://rapidshare.com/files/66085556/RUU_BREE100_1.34.261.1_1.38.00.10_HTCRUS_SHIP.exe
Its for RUS QTEK_AO7.
Then you will have SPL 1.10
I have similar problem
I had ROM 6.1 from Futureshock...still problem with radio (my phone couldn´t accessble but signal icon shows good signal, radio version 1.38.0000), so I decided flash some original ROM. Aftet that my booting stuck on HTC logo or Windows Mobile logo. So I can´t use normal way to flashing. Only from SD card or first turn on phone to boot loader mode and than attach usb cable and start flashing. From SD card (where is renamed ROM BREEIMG.NBH) after enter into bootloader mode start loading and than just turn to trhreecolour menu where is BREE100 - IPL-0.90 and BREE100-1.10.0000 and doesn´t want continue. If I flash ROM via USB cable (first go to threecolour mode, than attach cable) than run ROMUpdateUtility.exe and flash process is being started but always die on 2%, than autoreboot and again stuck on HTC logo.
I tried soft reset, I tried lot of ROM versions HTCRUS, HTCEUR, QTEKEUR, FUTURESHOCK but still same problem during flash ROM stop on 2%...
Any ideas how to back life to my MTeoR?
Can I use application like MTTY? Could me help this program?
Thanks for any help...
hi, can any1 send me a link for a ger version of wm6.0pro ?
Wigo said:
I had ROM 6.1 from Futureshock...still problem with radio (my phone couldn´t accessble but signal icon shows good signal, radio version 1.38.0000), so I decided flash some original ROM. Aftet that my booting stuck on HTC logo or Windows Mobile logo. So I can´t use normal way to flashing. Only from SD card or first turn on phone to boot loader mode and than attach usb cable and start flashing. From SD card (where is renamed ROM BREEIMG.NBH) after enter into bootloader mode start loading and than just turn to trhreecolour menu where is BREE100 - IPL-0.90 and BREE100-1.10.0000 and doesn´t want continue. If I flash ROM via USB cable (first go to threecolour mode, than attach cable) than run ROMUpdateUtility.exe and flash process is being started but always die on 2%, than autoreboot and again stuck on HTC logo.
I tried soft reset, I tried lot of ROM versions HTCRUS, HTCEUR, QTEKEUR, FUTURESHOCK but still same problem during flash ROM stop on 2%...
Any ideas how to back life to my MTeoR?
Can I use application like MTTY? Could me help this program?
Thanks for any help...
Click to expand...
Click to collapse
I'm not sure that I understand well, but if you flash from SD, it finish in 100% and than go to three color boot screen? ....
Hi alebo caf Vašek ;-)
My problem is that always stuck on boot image HTC or Windows Mobile blue screen. I can´t use way copy necesseary files to root of phone memmory and than run sspl etc...I have to turn manualy to three-color mode, than connect USB cable and run upgrade utility but still froze instalation on 2%, If I use SD card methode with BREEIMG file uploading doesn´t start....
p.s.: Ak by si mal dáku radu tak možno lepšie vysvetliť po česky ;-). Moje ICQ 208-393-971
Dík
CZ Rom
I would like to install new ROM into my Mteor, but I have no experience doing it. I do not know which version to try, all I need is to be able to enter czech letters on HW keyboard as with original ROM. Any sugestion? I preffer personal answer in czech language ([email protected])
Hi,
I successfully HardSPL'd my 8125 G4 a few weeks ago, then loaded NBD8.3 rom.. its been awesome.
Yesterday, the phone booted and shows the spash screen, but then boots back into bootloader.
I tried to reflash NBD and a few other roms again, they flash successfully, but it still boots into the bootloader.
I tried to hardSPL flash my phone, but that says it cant connect to the device (but the RUU connects and flashes fine)
Whats my problem??
Thanks
I tried to use mtty1.42, the instructions say to use USB and not COM1 or COM2, but I dont have USB in the drop down box??
please help!
Thanks!
Hello together, maybe someone can give me a hint.
after flashing my wizard it always boot´s into the "red green blue" screen. I tryed different tools and roms and its possible to install a new rom.
the "pda phone rom update utility 2.00.1" always says
congratulations.. update successfull.. etc.
but after reboot the wizard again comes into the red green blue screen. arg
ipl 3.08.001
spl 3.08.0001
thanks for your help
Hello,
Wizard_Love_2.26.10.2_WWE_Novii_CF2 did the Job. The Updater is italian (i guess) but the rom i english.
Thanks to all who post here a lot usefull thinks!!
search, try & error did the job.
how to exit bootloader
I flashed wizard 200 it was succesfull but now it is stuck with bootloader mode. hard reset won't work.
I know that battery died right after flash and now i can't charge it or exit boot loader.
Any idea, except waiting 20 days for new battery?
all the best!
XDAMON said:
I flashed wizard 200 it was succesfull but now it is stuck with bootloader mode. hard reset won't work.
I know that battery died right after flash and now i can't charge it or exit boot loader.
Any idea, except waiting 20 days for new battery?
all the best!
Click to expand...
Click to collapse
Men, it happen to my the same thing.
100% battery charge before start, but it dies after the procedure... No spare battery, No external charger, No charge on boot loader mode... "touchè"
We have a very functional smartphone before, but now we have a beatiful grey brick with a 3 coloured screen.
That`s not all... if you ordered a new Baterry, if it`s not stolen by the postman, when it reaches to you let`s pray that is in good shape...
Men, we cant do anything but wait... and the wait is killing me.
The alternative is a home made battery with 3 AAA batteries, but i will left that to Mc Gyver.
I ordered battery charges as well
Will post result in 2-3 weeks when I get it finally.
Any other (buttons) trick?
Hi guys...
today i received my new Touch HD...
now i want to flash another rom...
as i can see in bootloader the preowner have installed the hardspl... 1.14.0000
but as i want to start a rom flash the progressbar get stuck on 0%....
trying to flash thru SD Flash the screen stucks on "Loading..."
can someone help me whats the problem??
If you get stuck at "loading" when you try to flash custom ROM from SD card, you probably have stock SPL.
Try USPL.
-KJ
Hi, there... i got it now with the old htc usb sync drivers for vista
and with uspl...
thx4help
No problems. Welcome aboard the Blackstone train.
-KJ
I recently tried to update HTC HD7 firmware after a hang issue. I had hard reset the phone and the phone now boots in bootloader mode. I cannot exit the bootloader mode. Also, I may have tried flashing the device with RUU_Schubert_hTC_Asia_WWE_2.20.841.02_Radio_5.65.09.11a_22.44.50.15_NoDo
When the ROM version of the phone is 2250.09.12302.707. Now my phone is unusable. It starts in bootloader mode any attempt to flash it with other 707 ROMs RUU_Schubert_hTC_Asia_WWE_1.57.707.02_Radio_5.52.09.16_22.33a.50.10_Signed_SCHUBERT_RELEASE fails with a update error 270: saying the ROM file is corrupt please help. My phone is unbranded.
Thanks,
Please help
The windows phone support tool 'might' be able to help you out here.
://support.microsoft.com/kb/2530409
Unfortunately as a noob to the forums I can't post links. Add http to the above to make it into a link.
I had the same problem, but i managed to solve!!!
Invert the flash order from this thread: http://forum.xda-developers.com/showthread.php?t=1000520
Flash b2 (big one) first and ignore the error then flash b1 (small one) and the phone will boot
Now guys my phone is toast. It does not work beyond the bootloader mode. I tried flashing the device but the process gets stuck at 0%. I tried formatting the SD card but the same tricolor boot screen appears. What the hell has gone wrong? Anyone who can help me thanks a million. I would really appreciate it.
did you try flashing one of these 707 roms ?
http://forum.xda-developers.com/showthread.php?t=888747&page=20
if u stuck in bootloader mode, pull out the battery , and install it back again
It could be a faulty USB port during the flash process. Try another USB port.
Hi all!
I have a rather major problem.
Today Kies told me that I have a new upgrade for the firmware of my Samsung Galay S i9000. It ran stuck rom with only a few apps installed. I said i want to upgrade so it started to check everything, done a backup of my contacts, started to download the firmware on my PC. So far everything is good.
After that the phone rebooted into an android working logo and said "Downloading..." it stayed like this for a while and after that Kies gave an error. Now the phone is stuck on this screen. Disconecting the device from the usb cable and pluging it back in does't do anything. Kies tries to connect to it but after a couple of minues gives an error that the device is not responding and I should try to rebot the device.
Any idea what to do? This is the work phone so I have to fix this.
Any help is appreciated.
EDIT: Fixed the problem with odin. I know I should get a warning for not searching first...but I panicked.