Hi,
I successfully HardSPL'd my 8125 G4 a few weeks ago, then loaded NBD8.3 rom.. its been awesome.
Yesterday, the phone booted and shows the spash screen, but then boots back into bootloader.
I tried to reflash NBD and a few other roms again, they flash successfully, but it still boots into the bootloader.
I tried to hardSPL flash my phone, but that says it cant connect to the device (but the RUU connects and flashes fine)
Whats my problem??
Thanks
I tried to use mtty1.42, the instructions say to use USB and not COM1 or COM2, but I dont have USB in the drop down box??
please help!
Thanks!
Hello together, maybe someone can give me a hint.
after flashing my wizard it always boot´s into the "red green blue" screen. I tryed different tools and roms and its possible to install a new rom.
the "pda phone rom update utility 2.00.1" always says
congratulations.. update successfull.. etc.
but after reboot the wizard again comes into the red green blue screen. arg
ipl 3.08.001
spl 3.08.0001
thanks for your help
Hello,
Wizard_Love_2.26.10.2_WWE_Novii_CF2 did the Job. The Updater is italian (i guess) but the rom i english.
Thanks to all who post here a lot usefull thinks!!
search, try & error did the job.
how to exit bootloader
I flashed wizard 200 it was succesfull but now it is stuck with bootloader mode. hard reset won't work.
I know that battery died right after flash and now i can't charge it or exit boot loader.
Any idea, except waiting 20 days for new battery?
all the best!
XDAMON said:
I flashed wizard 200 it was succesfull but now it is stuck with bootloader mode. hard reset won't work.
I know that battery died right after flash and now i can't charge it or exit boot loader.
Any idea, except waiting 20 days for new battery?
all the best!
Click to expand...
Click to collapse
Men, it happen to my the same thing.
100% battery charge before start, but it dies after the procedure... No spare battery, No external charger, No charge on boot loader mode... "touchè"
We have a very functional smartphone before, but now we have a beatiful grey brick with a 3 coloured screen.
That`s not all... if you ordered a new Baterry, if it`s not stolen by the postman, when it reaches to you let`s pray that is in good shape...
Men, we cant do anything but wait... and the wait is killing me.
The alternative is a home made battery with 3 AAA batteries, but i will left that to Mc Gyver.
I ordered battery charges as well
Will post result in 2-3 weeks when I get it finally.
Any other (buttons) trick?
Related
hey.. ive upgrade to new roms before.. however i tried going from the cingular 2.25 rom to summiters aku 2.3.. and it froze at 98% and was unable to finsh.. now I jsut tried downgrading and it froze again at 98%.. it won't complete anytthing.. help. please.
It's normal for it to seem to freeze at 98%, but it really will complete if you just wait a few minutes. No worries... just be patient.
If Stuck
hey if your phone is doesn't go through with the rom upgrade and doesn't push through and when you reboot you get stuck on the boot screen.
Put your phone into USB programming mode by holding the camera button down and doing a soft reset with the stylus. Then you will be able to load any rom you choose.
With regards to your frozen at 98 just give it time i would say don't unplug
same problem, still stuck
2nd time trying to load "Cingular_Custom_AKU2.3_Combo_Installer_V1.exe" ROM but still stuck at 98%...on the computer it says 100% and finishes but the phone is still stuck at 98%..tried to do a soft reset, but stuck at bootloader screen..
Help pleaseee!
Thanks!
Ok, so I was flashing a rom(blackdiamond 1.0) via shelltool and THANKS TO WINXP, it went into it's powersaver mode and logged out.
The phone ended up being half-flashed.
Now, when I boot my phone, it stops in the IPL/SPL screen with the Wizard Love background(which was my original rom).
I soft reset, and it goes back to the same screen and hangs.
I hard reset and it does exactly the same thing.
Any advice?
Thank You for your time
False alarm folks!
After reading another post, I put it into bootloader mode with Camera + Power and even though the computer(activesync) doesn't recognize it, it allowed me to flash the wizard rom.
:-D
Hello all,
first let me apologize for the long post, and my noobiness. I'm new to the smartphone world, I've sucessfully flashed my Kaiser (from work). Also, I would like to thank everyone who is cooking!
I have the HTC Mteor, which I'm trying to Flash to WM6.1.
When I got it (used), I did a hard reset, and it went back to WM5 in Russian.
I believe I successfully unlocked it, and can now get to the tri-color screen.
It reads:
BBEE100
IPL-0.90
BREE100
SPL-2.05
Every ROM (including the original from HTC) opens, forces the phone to the tri-color screen, and then dies. Error 260, 262, etc.
I've searched the forums, and read that the SPL should be 1.10, but I can't get that to install either.
Any help/suggestions?
Thanks,
Jeff
jjmorris100 said:
Hello all,
first let me apologize for the long post, and my noobiness. I'm new to the smartphone world, I've sucessfully flashed my Kaiser (from work). Also, I would like to thank everyone who is cooking!
I have the HTC Mteor, which I'm trying to Flash to WM6.1.
When I got it (used), I did a hard reset, and it went back to WM5 in Russian.
I believe I successfully unlocked it, and can now get to the tri-color screen.
It reads:
BBEE100
IPL-0.90
BREE100
SPL-2.05
Every ROM (including the original from HTC) opens, forces the phone to the tri-color screen, and then dies. Error 260, 262, etc.
I've searched the forums, and read that the SPL should be 1.10, but I can't get that to install either.
Any help/suggestions?
Thanks,
Jeff
Click to expand...
Click to collapse
install this official rom from HTC
http://rapidshare.com/files/66085556/RUU_BREE100_1.34.261.1_1.38.00.10_HTCRUS_SHIP.exe
Its for RUS QTEK_AO7.
Then you will have SPL 1.10
I have similar problem
I had ROM 6.1 from Futureshock...still problem with radio (my phone couldn´t accessble but signal icon shows good signal, radio version 1.38.0000), so I decided flash some original ROM. Aftet that my booting stuck on HTC logo or Windows Mobile logo. So I can´t use normal way to flashing. Only from SD card or first turn on phone to boot loader mode and than attach usb cable and start flashing. From SD card (where is renamed ROM BREEIMG.NBH) after enter into bootloader mode start loading and than just turn to trhreecolour menu where is BREE100 - IPL-0.90 and BREE100-1.10.0000 and doesn´t want continue. If I flash ROM via USB cable (first go to threecolour mode, than attach cable) than run ROMUpdateUtility.exe and flash process is being started but always die on 2%, than autoreboot and again stuck on HTC logo.
I tried soft reset, I tried lot of ROM versions HTCRUS, HTCEUR, QTEKEUR, FUTURESHOCK but still same problem during flash ROM stop on 2%...
Any ideas how to back life to my MTeoR?
Can I use application like MTTY? Could me help this program?
Thanks for any help...
hi, can any1 send me a link for a ger version of wm6.0pro ?
Wigo said:
I had ROM 6.1 from Futureshock...still problem with radio (my phone couldn´t accessble but signal icon shows good signal, radio version 1.38.0000), so I decided flash some original ROM. Aftet that my booting stuck on HTC logo or Windows Mobile logo. So I can´t use normal way to flashing. Only from SD card or first turn on phone to boot loader mode and than attach usb cable and start flashing. From SD card (where is renamed ROM BREEIMG.NBH) after enter into bootloader mode start loading and than just turn to trhreecolour menu where is BREE100 - IPL-0.90 and BREE100-1.10.0000 and doesn´t want continue. If I flash ROM via USB cable (first go to threecolour mode, than attach cable) than run ROMUpdateUtility.exe and flash process is being started but always die on 2%, than autoreboot and again stuck on HTC logo.
I tried soft reset, I tried lot of ROM versions HTCRUS, HTCEUR, QTEKEUR, FUTURESHOCK but still same problem during flash ROM stop on 2%...
Any ideas how to back life to my MTeoR?
Can I use application like MTTY? Could me help this program?
Thanks for any help...
Click to expand...
Click to collapse
I'm not sure that I understand well, but if you flash from SD, it finish in 100% and than go to three color boot screen? ....
Hi alebo caf Vašek ;-)
My problem is that always stuck on boot image HTC or Windows Mobile blue screen. I can´t use way copy necesseary files to root of phone memmory and than run sspl etc...I have to turn manualy to three-color mode, than connect USB cable and run upgrade utility but still froze instalation on 2%, If I use SD card methode with BREEIMG file uploading doesn´t start....
p.s.: Ak by si mal dáku radu tak možno lepšie vysvetliť po česky ;-). Moje ICQ 208-393-971
Dík
CZ Rom
I would like to install new ROM into my Mteor, but I have no experience doing it. I do not know which version to try, all I need is to be able to enter czech letters on HW keyboard as with original ROM. Any sugestion? I preffer personal answer in czech language ([email protected])
Hello all,
as the title says, one of my touch diamond's is stuck in bootloader screen.
I didnt do anything in between it working and not working, it was on my desk, put it there working, got it 5mins later, and it was in bootloader screen (tricolor screen).
What i've already done to try and fix it:
flash it with the original HTC rom, flash completes succesfully, phone reboots to tricolor screen, so no solution there.
install mtty and format the phone, this completes, reboot the phone, again goes to the bootloader.
reflash the phone with original rom after cleaning it with mtty, flash again completes succesfully but when it reboots after flashing it just goes to bootloader again.
Tried to flash a Hardspl: stuck at 0% and stays there. so that doesnt work.
BUT! when in mtty i give the "boot" command, it DOES start to boot WM. but then again, when i turn the phone of, and on again, or it reboots because of first start after flash, it goes to bootloader again. The VOLDOWN button is NOT stuck, cause when it boots i can use the vol buttons perfectly fine.
Anyone got an suggestion in how to unbrick it? i have a second, perfectly working diamond here too, if that helps in any way.
Some more info ive just seen in mtty, when i told it to boot, it said ONE BAD BLOCK IN CE, remove block ---- to ---- (dont know the exact numbers anymore)
hi..i had something like that...
just download this.
"RUU_Signed_1_93OliNex_HSPL_UnsignedEdition"
it's only 1.7MB and it's will make it work.. atleast it did the job for me...
Hi,
My T mobile touch diamond stuck in bootloader screen? Any experties to help me please.
Thanks in advance.
Hey
yesterday i almost bricked or maybe bricked my phone. Accidentally changed partition from B to A. Today my phone boot only to nokia logo and stuck on it
Many hours readed about this phone back to life. Recover mode not work, fastboot mode not work. This phone one chance to turn off is completly battery discharge.
If no chance to get back this phone to normal i will get throw it to trash
Classic example of a softbrick can't really call it a hardbrick tbh. PM me all of the details and I'll later make a tutorial if we manage to fix it up.
mati5000 said:
Hey
yesterday i almost bricked or maybe bricked my phone. Accidentally changed partition from B to A. Today my phone boot only to Nokia logo and stuck on it
Many hours reading about this phone back to life. Recover mode not work, fastboot mode not work. This phone one chance to turn off is completely battery discharge.
If no chance to get back this phone to normal i will get throw it to trash
Click to expand...
Click to collapse
I did the same thing.
- Downgrade to Oreo
- unlocked officially bootloader
-fastboot boot twrp.img
booted to twrp- Flashed zip on both slot with latest twrp
Changed slot A to slot B and
we have same problem.
How did you solve your issue?
Did you wait for battery-drain?
Or other combination of buttons.
I tried all the button-combination without success.
Hope you could give advice
Regards
Edit: How to solve!
I simply waited until the battery ran out
When battery was completely dead and no Nokia-logo any more
Then I charged the battery 3% juice without booting
and from there I entered recovery-mode with the help of a USB cable.
Holding the volume+ button while connecting the USB-cable
From TWRP-recovery I changed to the other inactive slot
and whooala, that's it!
I have OEM unlocked my nokia 8 boot loader by nokia official method ,
Then I decide to flash twrp and magick
When boot twrp it give an error that locked
Then I checked some forums and find a way ,
I do what is guided in that forum
Change boot slot b to a ... and I flashed twrp then I flash rom , at the end of flash slide to reboot , then I reboot but after that there is no response in device it went blank and black.....
If I connected to PC in some flash tool it show hs com 3008 and connecting sound in pc but mobile being blank and i cant even get to fast boot mode becoz device get blank ( while connected in pc if I power on or hold power but connection sound will come from my pc but no device or unknown device )
Pls help friends, really dunno what to do
Pls help !
Respond soon pls
Same as me bro.. my ta 1004 is dead after unlocking bootloader official method. And i flash boot twrp and magisk. But my phone always bootlop. I try to flash with ost la. An qfil to recover. But i stuck in download mode. And i try to flash with twrp slide load .
And my phone is dead now.. i can do anithing. My phone can turn on now... i charge it .. but still not respond
Anyone help me