Hey
yesterday i almost bricked or maybe bricked my phone. Accidentally changed partition from B to A. Today my phone boot only to nokia logo and stuck on it
Many hours readed about this phone back to life. Recover mode not work, fastboot mode not work. This phone one chance to turn off is completly battery discharge.
If no chance to get back this phone to normal i will get throw it to trash
Classic example of a softbrick can't really call it a hardbrick tbh. PM me all of the details and I'll later make a tutorial if we manage to fix it up.
mati5000 said:
Hey
yesterday i almost bricked or maybe bricked my phone. Accidentally changed partition from B to A. Today my phone boot only to Nokia logo and stuck on it
Many hours reading about this phone back to life. Recover mode not work, fastboot mode not work. This phone one chance to turn off is completely battery discharge.
If no chance to get back this phone to normal i will get throw it to trash
Click to expand...
Click to collapse
I did the same thing.
- Downgrade to Oreo
- unlocked officially bootloader
-fastboot boot twrp.img
booted to twrp- Flashed zip on both slot with latest twrp
Changed slot A to slot B and
we have same problem.
How did you solve your issue?
Did you wait for battery-drain?
Or other combination of buttons.
I tried all the button-combination without success.
Hope you could give advice
Regards
Edit: How to solve!
I simply waited until the battery ran out
When battery was completely dead and no Nokia-logo any more
Then I charged the battery 3% juice without booting
and from there I entered recovery-mode with the help of a USB cable.
Holding the volume+ button while connecting the USB-cable
From TWRP-recovery I changed to the other inactive slot
and whooala, that's it!
I have OEM unlocked my nokia 8 boot loader by nokia official method ,
Then I decide to flash twrp and magick
When boot twrp it give an error that locked
Then I checked some forums and find a way ,
I do what is guided in that forum
Change boot slot b to a ... and I flashed twrp then I flash rom , at the end of flash slide to reboot , then I reboot but after that there is no response in device it went blank and black.....
If I connected to PC in some flash tool it show hs com 3008 and connecting sound in pc but mobile being blank and i cant even get to fast boot mode becoz device get blank ( while connected in pc if I power on or hold power but connection sound will come from my pc but no device or unknown device )
Pls help friends, really dunno what to do
Pls help !
Respond soon pls
Same as me bro.. my ta 1004 is dead after unlocking bootloader official method. And i flash boot twrp and magisk. But my phone always bootlop. I try to flash with ost la. An qfil to recover. But i stuck in download mode. And i try to flash with twrp slide load .
And my phone is dead now.. i can do anithing. My phone can turn on now... i charge it .. but still not respond
Anyone help me
Related
Hey,
Well, I have bricked my Note like many others. The only weird thing is that the Note is not even starting anymore. At first there was no problem, I could boot the device. After a reboot (hour after flashing rom) the device didn't go past the boot screen anymore. It could also not load recovery. It could get into download mode, but I was not able to flash a kernel to read out the device in CMD.
After that however, the device didn't boot anymore and it only displayed the batery when it was loading. However, after some hours, even the batery didn't appear while loading. So, is this some kind of ultra brick? It didn't do anything anymore
Try connecting to odin in blind mode. Ie do same as you would nornally do to go to download mode and see if odin can connect.
Also tried that, but it did not work
My condoleances on your brick.
JohanR91 said:
Hey,
Well, I have bricked my Note like many others. The only weird thing is that the Note is not even starting anymore. At first there was no problem, I could boot the device. After a reboot (hour after flashing rom) the device didn't go past the boot screen anymore. It could also not load recovery. It could get into download mode, but I was not able to flash a kernel to read out the device in CMD.
After that however, the device didn't boot anymore and it only displayed the batery when it was loading. However, after some hours, even the batery didn't appear while loading. So, is this some kind of ultra brick? It didn't do anything anymore
Click to expand...
Click to collapse
Try this
http://forum.xda-developers.com/showthread.php?t=1257434
To force your phone into Download mode !
Try some helpful link like this one bud -http://forum.xda-developers.com/showthread.php?t=1661590
Hello,
First of all, sorry for my english as it is not my mother language
I've tried today flashing CM13 on my Wiko Rainbow, but I either failed following the instructions or the files I had were corrupted, leading to a never-ending boot.
I don't know if it was already a soft-brick back then, as the phone turned off while booting just after the installation, but 40min after it (obviously because of en empty battery, which was at 37% before installation)
At first, when the phone was plugged into the computer, the phone was booting up, showing the charging icon for a few seconds, and then was going into the infinite boot for 10 seconds, and then rebooting for the same process.
When I was charging the phone on a wall plug, the phone was just in an infinite loop.
The problem was that, when I did the Volume down + Volume up + power thing, I had a choice between Factory mode and Custom mode, but both of them led me to a black screen, and the phone powered off.
I then searched how to install a custom recovery with a soft-bricked phone, and I got a tutorial on SP Flash Tool, that told me to use a MT6582 scatter file, and to select only a Recovery. I downloaded a TWRP for my phone, and then started download, retracted the battery and plugged the phone on the computer.
I got this message : "brom error s_fthnd_file_is_not_loaded_yet"
The software told me to format the Flash, which I did, and this error now became this : "BROM ERROR : S_DL_GET_DRAM_SETTING_FAIL (5054)"
The thing is that now, the soft brick is now a hard brick, and I can't get the phone to boot anymore, adb doesn't recognize my device, and after installing and reinstalling my phone drivers, no solution came out yet, so I'm hopping that you'll find a solution to help my problem
Thanks.
Regards.
MichelFou said:
Hello,
First of all, sorry for my english as it is not my mother language
I've tried today flashing CM13 on my Wiko Rainbow, but I either failed following the instructions or the files I had were corrupted, leading to a never-ending boot.
I don't know if it was already a soft-brick back then, as the phone turned off while booting just after the installation, but 40min after it (obviously because of en empty battery, which was at 37% before installation)
At first, when the phone was plugged into the computer, the phone was booting up, showing the charging icon for a few seconds, and then was going into the infinite boot for 10 seconds, and then rebooting for the same process.
When I was charging the phone on a wall plug, the phone was just in an infinite loop.
The problem was that, when I did the Volume down + Volume up + power thing, I had a choice between Factory mode and Custom mode, but both of them led me to a black screen, and the phone powered off.
I then searched how to install a custom recovery with a soft-bricked phone, and I got a tutorial on SP Flash Tool, that told me to use a MT6582 scatter file, and to select only a Recovery. I downloaded a TWRP for my phone, and then started download, retracted the battery and plugged the phone on the computer.
I got this message : "brom error s_fthnd_file_is_not_loaded_yet"
The software told me to format the Flash, which I did, and this error now became this : "BROM ERROR : S_DL_GET_DRAM_SETTING_FAIL (5054)"
The thing is that now, the soft brick is now a hard brick, and I can't get the phone to boot anymore, adb doesn't recognize my device, and after installing and reinstalling my phone drivers, no solution came out yet, so I'm hopping that you'll find a solution to help my problem
Thanks.
Regards.
Click to expand...
Click to collapse
You're going to need the firmware (not just TWRP) to fix your phone. Have you been able to download it?
Hovatek said:
You're going to need the firmware (not just TWRP) to fix your phone. Have you been able to download it?
Click to expand...
Click to collapse
using SP Tool gives directly through the USB
I have a redmi 4x and i tried flashing pixel experience rom on it but was not successful in doing that . Also didn't take any backup . And i was struck in the twrp recovery for a couple of days . Then i flashed the miui stble rom through my sd card and didn't get any error . But when i was going to boot it said "No OS installed" . So i thought of having a backup before booting for the first time and as i tried having a backup then phone switched off and showed no signs that it was working . It didnt even boot and was bricked . So i thought it was hard bricked . But after a day and some charging the notifictaion light light started working on charing and also phone vibrated on pressing down the power button . But when i try to boot it the phone shows some backlight but nothing on the screen and it goes off . Is it Hard Bricked or Soft Bricked ?
Bhagyesh2491 said:
I have a redmi 4x and..........
Click to expand...
Click to collapse
I don't have this device but, you may be able to obtain some member guidance within the following thread that's specific to your device.
https://forum.xda-developers.com/showthread.php?t=3800104
Good Luck!
~~~~~~~~~~~~~~~
UNLESS asked to do so, PLEASE don't PM me regarding support. Sent using The ClaRetoX Forum App on my SM-G900T device.
Showing "No OS installed" it did happened with me when few months back i flashed first Global beta MIUI 10, the installation went perfectly good with message "No OS installed" it was strange when flashing was went right.
after rebooting it to system it was stuck in bootlogo. i do not know why it said "No OS installed" despite installation went perfect.
at first i did checked if system is checked for boot or not in recovery(it was not) so i checked it and rebooted but it still refused to boot and keep getting stuck in bootlogo but after flashing latest Redwolf treble recovery at that time solved issue for me(currently using redwolf recovery) and i was able to boot into system and later other ROMs.
anyways this solution worked for me "No OS installed". (writing this because it might help someone if they have same issue)
what is current state of your device? are you able boot in fastboot or recovery ? if any one of this works i would recommend you to flash if you are able boot into fastboot then flash latest stable Global MIUI ROM via Mi flash tools or flash latest treble supported recovery via fastboot.
if it isn't booting at all or it refused boot into any mode you might have to go for test point method to revive your device as you can see in above mentioned comment by xda recognized contributor's thread you can find test point method is mentioned by OP or here is link for it http://en.miui.com/thread-693884-1-1.html
you can also find video for the same on youtube.
proceed with precaution.
No it isn't booting at all . It is detected by my PC as a Battery but it shows it is android . Also notification light turns on after trying to charge it and it also vibrates . When i hold down the power button its shows some kind of a backlight but it doesnt boot . Is it hard bricked or soft bricked ?
Bhagyesh2491 said:
No it isn't booting at all . It is detected by my PC as a Battery but it shows it is android . Also notification light turns on after trying to charge it and it also vibrates . When i hold down the power button its shows some kind of a backlight but it doesnt boot . Is it hard bricked or soft bricked ?
Click to expand...
Click to collapse
I am not sure if it is hard bricked or soft bricked.
It detects on computer and doesn't shows anything on display.
Try connecting to PC and see if detects on Mi flash tools if it does then flash latest stable ROM through it.
Try using mi flash tool. This happened to me too, tried flashing pixel experience pie on mine and bricked it. Couldn't even access the twrp and my phone was stuck on fastboot screen. Luckily I had mi flashing tool and knew how to flash official MIUI rom through it. I did a clean flash of MIUI rom and it pretty much reverted the phone back to original conditions but few hours later i re installed twrp and went back to pixel exp OREO.
Do we get a ota update from pixel experience oreo to pixel experience pie rom ?
Have you tried to boot into the fastboot mode?
if yes then flash miui stable rom via mi flash tool
Carefully Read instruction bro :----
PC required windows 8 or Up..
1-Firstly installed Adb
2.twrp installer for redmi 4x zip
3-Extract all file in zip
4-Click .bat file and follow instruction of command window
5-twrp successfully installed in your device automatic device boot in recovery mode
6-Sd card inserted do you want flash ROM by TWRP
7- FLASH do you want any thing ..
8- Lazy Flasher is Compulsory flash
9 - enjoyed ROM without Bug
Ok guys frist of all sorry for my english
Last night i was very happy because my bootloader was unlocked after being waiting 15 days so i just start with the basics TWRP...
The frist one i tried was a chinese one it works but when i restart the phone the recovery disapear so i look for another one that could work i found the mauronofrio release and it boot i do a factory reset just to see if everything was working... try to sideload xiaomi.eu rom but dont work so i decide to copy and paste from my computer... everything was ok the phone restart i configure it and copy and paste the rom then i turn the phone off and tried to go to the recovery and surprise the problem start it just get to fastboot screen if i press the power button fastboot if i pres power volume down or up fastboot screen anything was workin so i decide to instal the stock rom via xiaomi flash tool and yep everything works normal but everytime i turn off the phone it get stuck on the fastboot screen and i have to use xiaomi flash tool again to flash the stock software if anyone have the knoledge and want to help i would be very very grateful
I m beging for help right now is not a big deal but when the real roms came out the kernels and etc what i m going to do? i justo bought the mi 9 because is very customizable if i cant customize my device i would go with the p30 or the mate 20 :C if anyone know anything that could help pls...
Hello there, I`ve got a problem with my Xiaomi Redmi Note 10 5G.
After I`ve flashed TWRP, when I turn on my Phone, it doesn`t boot.
The first time it did llike this the accu was next to empty.
So thought, when I would buy a new accu, I would be able to flash it again, but now I've put a new accu in but It's also not possible to flash it again.
I've got a broken Display on this phone, too.
Yesterday I've ordered a new Display.
Today I've tried to boot into Fastboot Mode, so I would have known that it's booted into Fastboot Mode, if there is shown a device in the CMD.
Before I get the new Display, please help me to "Unbrick", I think it's bricked, this phone.
I don't know what I can do.
Bootloader is opened and I think I bricked it by flashing TWRP. And the accu could has been a problem, because it was next to empty.
JonnyBoy84
i dont understand if your phone can enter into fastboot. your message is not clear