Hello,
First of all, sorry for my english as it is not my mother language
I've tried today flashing CM13 on my Wiko Rainbow, but I either failed following the instructions or the files I had were corrupted, leading to a never-ending boot.
I don't know if it was already a soft-brick back then, as the phone turned off while booting just after the installation, but 40min after it (obviously because of en empty battery, which was at 37% before installation)
At first, when the phone was plugged into the computer, the phone was booting up, showing the charging icon for a few seconds, and then was going into the infinite boot for 10 seconds, and then rebooting for the same process.
When I was charging the phone on a wall plug, the phone was just in an infinite loop.
The problem was that, when I did the Volume down + Volume up + power thing, I had a choice between Factory mode and Custom mode, but both of them led me to a black screen, and the phone powered off.
I then searched how to install a custom recovery with a soft-bricked phone, and I got a tutorial on SP Flash Tool, that told me to use a MT6582 scatter file, and to select only a Recovery. I downloaded a TWRP for my phone, and then started download, retracted the battery and plugged the phone on the computer.
I got this message : "brom error s_fthnd_file_is_not_loaded_yet"
The software told me to format the Flash, which I did, and this error now became this : "BROM ERROR : S_DL_GET_DRAM_SETTING_FAIL (5054)"
The thing is that now, the soft brick is now a hard brick, and I can't get the phone to boot anymore, adb doesn't recognize my device, and after installing and reinstalling my phone drivers, no solution came out yet, so I'm hopping that you'll find a solution to help my problem
Thanks.
Regards.
MichelFou said:
Hello,
First of all, sorry for my english as it is not my mother language
I've tried today flashing CM13 on my Wiko Rainbow, but I either failed following the instructions or the files I had were corrupted, leading to a never-ending boot.
I don't know if it was already a soft-brick back then, as the phone turned off while booting just after the installation, but 40min after it (obviously because of en empty battery, which was at 37% before installation)
At first, when the phone was plugged into the computer, the phone was booting up, showing the charging icon for a few seconds, and then was going into the infinite boot for 10 seconds, and then rebooting for the same process.
When I was charging the phone on a wall plug, the phone was just in an infinite loop.
The problem was that, when I did the Volume down + Volume up + power thing, I had a choice between Factory mode and Custom mode, but both of them led me to a black screen, and the phone powered off.
I then searched how to install a custom recovery with a soft-bricked phone, and I got a tutorial on SP Flash Tool, that told me to use a MT6582 scatter file, and to select only a Recovery. I downloaded a TWRP for my phone, and then started download, retracted the battery and plugged the phone on the computer.
I got this message : "brom error s_fthnd_file_is_not_loaded_yet"
The software told me to format the Flash, which I did, and this error now became this : "BROM ERROR : S_DL_GET_DRAM_SETTING_FAIL (5054)"
The thing is that now, the soft brick is now a hard brick, and I can't get the phone to boot anymore, adb doesn't recognize my device, and after installing and reinstalling my phone drivers, no solution came out yet, so I'm hopping that you'll find a solution to help my problem
Thanks.
Regards.
Click to expand...
Click to collapse
You're going to need the firmware (not just TWRP) to fix your phone. Have you been able to download it?
Hovatek said:
You're going to need the firmware (not just TWRP) to fix your phone. Have you been able to download it?
Click to expand...
Click to collapse
using SP Tool gives directly through the USB
Related
I recently updated to V20A KDZ, with no problem. However, I was unable to unlock bootloader, though i'm on EUR-XXX version, so I've given up.
I tried to install the photosphere app of this thread : http://forum.xda-developers.com/showthread.php?t=2182850
So i copied manually the files in the /system folders. Then I rebooted, but the phone whas stuck on "Android is upgrading... Starting apps"
I rebooted once again, and it was unable to boot.
I tried to remove the battery and plug the USB cable with the vol- key to enter in S/W upgrade mode and flash KDZ, but each time I get a weird colored screen. I obviously don't have CWM installed.
Sometimes it gets again on the "Android is upgrading..."
I don't know what to do ?
Thanks
EDIT : Wow, did a very weird thing. Knowing that colored screens were voltage issues, i removed the battery and plugged the phone to the AC adaptator and got the S/W firmware upgrade mode ! So I put the battery back, plugged it on USB, removed the battery, launched the KDZ update and put the battery back again. It did work !
Hey guys, my phone got totally stuck on a Samsung logo (neverending loop).
Yesterday I let my bro play an Angry Birds on my phone. After a while I took my phone back and to my surprise it wasn't responding. Mobile was turned on (connected to the charger) but all I could see was a black screen. I tried restarting my phone by removing battery but it didn't help at all. I got stuck at Cyanogen Mod logo everytime. Since I haven't updated my firmware in a while I decided to intstall the newest version of CM (KitKat 4.4.4 from novafusion.pl) using Odin app. After a successful installation my phone still didn't boot up, I was getting stuck on a blue CM logo. After this I wanted to wipe my cache/dalvik cache but I wasn't able to get into recovery mode (getting stuck on a TeamWin screen). Reinstalling TWRP and installing ClockWork recovery didn't have any effect. I wiped my phone using .tar file found on this forums, tried reinstalling my ROM recovery many times, tried installing param file (don't even know what's that) and resetting three button combination using Benzonat0r's mod. None of these things seemed to have any impact. I'm still not able to get into recovery neither boot my phone up - Samsung logo bootloop. What am I supposed to do to unbrick my phone?
On a side note my knowledge about Android phones is tiny so please consider this. Also forgive me my poor grammar, not a native English speaker here.
Guskax said:
Hey guys, my phone got totally stuck on a Samsung logo (neverending loop).
Yesterday I let my bro play an Angry Birds on my phone. After a while I took my phone back and to my surprise it wasn't responding. Mobile was turned on (connected to the charger) but all I could see was a black screen. I tried restarting my phone by removing battery but it didn't help at all. I got stuck at Cyanogen Mod logo everytime. Since I haven't updated my firmware in a while I decided to intstall the newest version of CM (KitKat 4.4.4 from novafusion.pl) using Odin app. After a successful installation my phone still didn't boot up, I was getting stuck on a blue CM logo. After this I wanted to wipe my cache/dalvik cache but I wasn't able to get into recovery mode (getting stuck on a TeamWin screen). Reinstalling TWRP and installing ClockWork recovery didn't have any effect. I wiped my phone using .tar file found on this forums, tried reinstalling my ROM recovery many times, tried installing param file (don't even know what's that) and resetting three button combination using Benzonat0r's mod. None of these things seemed to have any impact. I'm still not able to get into recovery neither boot my phone up - Samsung logo bootloop. What am I supposed to do to unbrick my phone?
On a side note my knowledge about Android phones is tiny so please consider this. Also forgive me my poor grammar, not a native English speaker here.
Click to expand...
Click to collapse
Download This rom "I8190 серв. укр.rar" from here
Unpack .rar and open Odin.
Select the goldenxx.pit to [PIT]
Select CODE_I8190XXAMA2_809600_REV00_user_low_ship.tar.md 5 to [PDA]
Select CSC_QXE_I8190QXEAMA1_20130109.163004_REV00_user_lo w_ship.tar.md5 to [CSC]
Put your phone in download-mode and connect it to computer.
Hit [Start] when device is detected by Odin.
You will end up with a "La'Fleur" branded phone, but no worries!
Just go to download mode again and flash a custom recovery and after that a ROM of your choice.
The three button combo will still work!!
This is not my work, give my friend @tyson a thanks for that!
I tried installing stock recovery and ROM. After completed installation I finally managed to pass Samsung screen. I got to the something like Android installation screen and my phone suddenly shut down. Now it's totally bricked, I can't turn it on nor get into the download mode. Charging progress doesn't show up while phone is plugged in neither. Any help?
moonryder said:
Download This rom "I8190 серв. укр.rar" from
Unpack .rar and open Odin.
Select the goldenxx.pit to [PIT]
Select CODE_I8190XXAMA2_809600_REV00_user_low_ship.tar.md 5 to [PDA]
Select CSC_QXE_I8190QXEAMA1_20130109.163004_REV00_user_lo w_ship.tar.md5 to [CSC]
Put your phone in download-mode and connect it to computer.
Hit [Start] when device is detected by Odin.
You will end up with a "La'Fleur" branded phone, but no worries!
Just go to download mode again and flash a custom recovery and after that a ROM of your choice.
The three button combo will still work!!
This is not my work, give my friend @tyson a thanks for that!
Click to expand...
Click to collapse
Hey dude, I wish I saw your reply earlier. If my phone wasn't bricked now I'd give it a shot.
Hi,
I have a problem with my Mi5, last night I turned it off (it starts automatically at 7.00) and this morning I found it locked on the screen with the Mi logo and the word "powered by android".
I tried to restart it but I can't turn it off, whenever I try, it restarts and crashes again on that screen.
I can enter twrp and fastboot mode, but I can't detect the phone from my mac, either way, or through adb or fastboot, and i also already tryed to clean davlik and cache, but without succes
Does anyone have a solution?
Make backup and try to flash lineageos.
Also flash latest firmware with TWRP.
The phone isn't recognised by any pc, so it's impossible put a zip on it for flash a new rom
does it flash the lights if you charge it ?
try and let it drain the battery ( leave it for a few days ), and then charge to max.
if nothing of this works, you might need a flash cable .
Hi all,
I have put myself in horrible situation look like phone is bricked . I can not start my phone in recovery or download mode even.
here are the series of step I had performed:
1)Unlock bootloader and intalled latest twrp-3.0.2-1-h815.img 16.5M 2016-09-15 07:23:54 EDT for ( since 815/811) has same twrp on twrp website.
2) tried to install lineage OS rom for 811 but the recovery gave me problem that device is 815. Please install 815 rom, so I flashed 815 and it flashed fine and device booted and worked fine.
3)Now the problem starts, it crashed after some time and stuck in boot loop.
4)I had tried to boot in recovery and tried to restore back up image, but it crashed in the middle and after that I was not able to start to recovery.
5) Then I used the LG UP and flash kdz file H811V20r_00_0111.kdz for stock rom.
6) It flashed successfully, but device never got boot up and now I am unable to go to download mode.
7) Displaying small download mode symbol but device is stuck on the symbol and not going to Download mode.
I am stuck now, Is there any solution to come out of it. Please help me.
Thanks
Now my phone starts into download mode, and I flashed the original kdz h81120v_00_0425 using download mode, after flashing first time, it went to opitmizing Apps screen but restated in middle.
After that I tried multiple times sing hard reset, but it always freeze on 2nd screen when I press yes to reset.
I flashed kdz multiple time using LG up, but it stuck on LG logo with unlocked boot loader msg. not going to the bootloop.
Current condition is now I am unable to enter download mode it respond but freeze before entering download.
I can not hard reset as it always freezes on 2nd hard reset screen and not formatting.
No charging.
I am not sure, If this is some hardware issue or emmc fault , Please help me on this..
droidprav said:
Hi all,
I have put myself in horrible situation look like phone is bricked . I can not start my phone in recovery or download mode even.
here are the series of step I had performed:
1)Unlock bootloader and intalled latest twrp-3.0.2-1-h815.img 16.5M 2016-09-15 07:23:54 EDT for ( since 815/811) has same twrp on twrp website.
2) tried to install lineage OS rom for 811 but the recovery gave me problem that device is 815. Please install 815 rom, so I flashed 815 and it flashed fine and device booted and worked fine.
3)Now the problem starts, it crashed after some time and stuck in boot loop.
4)I had tried to boot in recovery and tried to restore back up image, but it crashed in the middle and after that I was not able to start to recovery.
5) Then I used the LG UP and flash kdz file H811V20r_00_0111.kdz for stock rom.
6) It flashed successfully, but device never got boot up and now I am unable to go to download mode.
7) Displaying small download mode symbol but device is stuck on the symbol and not going to Download mode.
I am stuck now, Is there any solution to come out of it. Please help me.
Thanks
Click to expand...
Click to collapse
droidprav said:
Now my phone starts into download mode, and I flashed the original kdz h81120v_00_0425 using download mode, after flashing first time, it went to opitmizing Apps screen but restated in middle.
After that I tried multiple times sing hard reset, but it always freeze on 2nd screen when I press yes to reset.
I flashed kdz multiple time using LG up, but it stuck on LG logo with unlocked boot loader msg. not going to the bootloop.
Current condition is now I am unable to enter download mode it respond but freeze before entering download.
I can not hard reset as it always freezes on 2nd hard reset screen and not formatting.
No charging.
I am not sure, If this is some hardware issue or emmc fault , Please help me on this..
Click to expand...
Click to collapse
thats not latest TWRP... latest unified h815- h811 name is twrp-3.1.1-0-g4 official
2) tried to install lineage OS rom for 811 but the recovery gave me problem that device is 815. Please install 815 rom, so I flashed 815 and it flashed fine and device booted and worked fine. why if you know its h811.. or is it.??
5) Then I used the LG UP and flash kdz file H811V20r_00_0111.kdz for stock rom. did you select refurbished .? this will clean wipe all partitions/
not sure how to help .. but next time search for uppercut// LGUP// and itll point you to file needed..
is it a h811 or h815.. could be that outside case is switched.?
raptorddd said:
thats not latest TWRP... latest unified h815- h811 name is twrp-3.1.1-0-g4 official
2) tried to install lineage OS rom for 811 but the recovery gave me problem that device is 815. Please install 815 rom, so I flashed 815 and it flashed fine and device booted and worked fine. why if you know its h811.. or is it.??
5) Then I used the LG UP and flash kdz file H811V20r_00_0111.kdz for stock rom. did you select refurbished .? this will clean wipe all partitions/
not sure how to help .. but next time search for uppercut// LGUP// and itll point you to file needed..
is it a h811 or h815.. could be that outside case is switched.?
Click to expand...
Click to collapse
I know I have done few things wrong in confusion, but realized later on. It is H811 TMO model for sure.
I did select refurbished while using LG UP
My phone is not completely dead.
Pressing power button it stuck on LG logo with unlocked boot loader msg. not going to the bootloop.
I am unable to enter download mode, it responds but freeze before entering download showing 4 blue dots.
I am able to enter recovery but I can not hard reset as it always freezes on 2nd hard reset screen and not formatting.
No charging, Device Manager shows nothing.
Is there a way to recover??
I am not sure, If this is some hardware issue or emmc fault , Please help me on this..
I'm in the same situation.
I tryed to install h81120v kdz and did it perfectly, but when the phone restarted... bootloop!
And now, if I try to enter in Download Mode, a message 'Download Mode' appear with 5 blue dots and nothing else.
My computer don't recognize it
I tryed the Unbrick method with SD Card but still the same
ReDemonBR said:
I'm in the same situation.
I tryed to install h81120v kdz and did it perfectly, but when the phone restarted... bootloop!
And now, if I try to enter in Download Mode, a message 'Download Mode' appear with 5 blue dots and nothing else.
My computer don't recognize it
I tryed the Unbrick method with SD Card but still the same
Click to expand...
Click to collapse
exactly same problem here but i managed to get out of 9008 brick by ls991 files now i have no download mode and only a charge before turning on message on the screen really pissed off now
Hey
yesterday i almost bricked or maybe bricked my phone. Accidentally changed partition from B to A. Today my phone boot only to nokia logo and stuck on it
Many hours readed about this phone back to life. Recover mode not work, fastboot mode not work. This phone one chance to turn off is completly battery discharge.
If no chance to get back this phone to normal i will get throw it to trash
Classic example of a softbrick can't really call it a hardbrick tbh. PM me all of the details and I'll later make a tutorial if we manage to fix it up.
mati5000 said:
Hey
yesterday i almost bricked or maybe bricked my phone. Accidentally changed partition from B to A. Today my phone boot only to Nokia logo and stuck on it
Many hours reading about this phone back to life. Recover mode not work, fastboot mode not work. This phone one chance to turn off is completely battery discharge.
If no chance to get back this phone to normal i will get throw it to trash
Click to expand...
Click to collapse
I did the same thing.
- Downgrade to Oreo
- unlocked officially bootloader
-fastboot boot twrp.img
booted to twrp- Flashed zip on both slot with latest twrp
Changed slot A to slot B and
we have same problem.
How did you solve your issue?
Did you wait for battery-drain?
Or other combination of buttons.
I tried all the button-combination without success.
Hope you could give advice
Regards
Edit: How to solve!
I simply waited until the battery ran out
When battery was completely dead and no Nokia-logo any more
Then I charged the battery 3% juice without booting
and from there I entered recovery-mode with the help of a USB cable.
Holding the volume+ button while connecting the USB-cable
From TWRP-recovery I changed to the other inactive slot
and whooala, that's it!
I have OEM unlocked my nokia 8 boot loader by nokia official method ,
Then I decide to flash twrp and magick
When boot twrp it give an error that locked
Then I checked some forums and find a way ,
I do what is guided in that forum
Change boot slot b to a ... and I flashed twrp then I flash rom , at the end of flash slide to reboot , then I reboot but after that there is no response in device it went blank and black.....
If I connected to PC in some flash tool it show hs com 3008 and connecting sound in pc but mobile being blank and i cant even get to fast boot mode becoz device get blank ( while connected in pc if I power on or hold power but connection sound will come from my pc but no device or unknown device )
Pls help friends, really dunno what to do
Pls help !
Respond soon pls
Same as me bro.. my ta 1004 is dead after unlocking bootloader official method. And i flash boot twrp and magisk. But my phone always bootlop. I try to flash with ost la. An qfil to recover. But i stuck in download mode. And i try to flash with twrp slide load .
And my phone is dead now.. i can do anithing. My phone can turn on now... i charge it .. but still not respond
Anyone help me