Hi,
I have a problem with my Mi5, last night I turned it off (it starts automatically at 7.00) and this morning I found it locked on the screen with the Mi logo and the word "powered by android".
I tried to restart it but I can't turn it off, whenever I try, it restarts and crashes again on that screen.
I can enter twrp and fastboot mode, but I can't detect the phone from my mac, either way, or through adb or fastboot, and i also already tryed to clean davlik and cache, but without succes
Does anyone have a solution?
Make backup and try to flash lineageos.
Also flash latest firmware with TWRP.
The phone isn't recognised by any pc, so it's impossible put a zip on it for flash a new rom
does it flash the lights if you charge it ?
try and let it drain the battery ( leave it for a few days ), and then charge to max.
if nothing of this works, you might need a flash cable .
Related
Hi guys,
Well i have a little problem with my Mi3, I was on Ivan's latest lollipop ROM and I tried to flash Xposed framework on it. But at the end of the installation of Xposed, I tried to reboot my phone and it was stuck in a boot loop
I thought about flashing the lollipop ROM again, but Windows does not detect my phone anymore... I don't know what to do... I tried to format the cache/user data/delvik cache and reboot, but nothing works. I'm on CWM recovery 6.0.5.1 by furniel and donbot.
Can any of you help me with this problem ? Thanks
(And sorry if my english isn't very good, it isn't my native langage ^^)
Update: I tried to flash the ROM with the terminal (on Linux with my laptop), my Mi3 is not detected here too, it is stuck "on waiting for devices" (yes, it is on fastboot mode) I tried to do flash it with the XiaomiTool found on this forum, but same problem....
Update 2: I forgot to turn it off and it was stuck at boot loop, now it has no battery left, i tried to charge it and it doesn't charge, the red led is blinking and nothing happens...
Hello,
First of all, sorry for my english as it is not my mother language
I've tried today flashing CM13 on my Wiko Rainbow, but I either failed following the instructions or the files I had were corrupted, leading to a never-ending boot.
I don't know if it was already a soft-brick back then, as the phone turned off while booting just after the installation, but 40min after it (obviously because of en empty battery, which was at 37% before installation)
At first, when the phone was plugged into the computer, the phone was booting up, showing the charging icon for a few seconds, and then was going into the infinite boot for 10 seconds, and then rebooting for the same process.
When I was charging the phone on a wall plug, the phone was just in an infinite loop.
The problem was that, when I did the Volume down + Volume up + power thing, I had a choice between Factory mode and Custom mode, but both of them led me to a black screen, and the phone powered off.
I then searched how to install a custom recovery with a soft-bricked phone, and I got a tutorial on SP Flash Tool, that told me to use a MT6582 scatter file, and to select only a Recovery. I downloaded a TWRP for my phone, and then started download, retracted the battery and plugged the phone on the computer.
I got this message : "brom error s_fthnd_file_is_not_loaded_yet"
The software told me to format the Flash, which I did, and this error now became this : "BROM ERROR : S_DL_GET_DRAM_SETTING_FAIL (5054)"
The thing is that now, the soft brick is now a hard brick, and I can't get the phone to boot anymore, adb doesn't recognize my device, and after installing and reinstalling my phone drivers, no solution came out yet, so I'm hopping that you'll find a solution to help my problem
Thanks.
Regards.
MichelFou said:
Hello,
First of all, sorry for my english as it is not my mother language
I've tried today flashing CM13 on my Wiko Rainbow, but I either failed following the instructions or the files I had were corrupted, leading to a never-ending boot.
I don't know if it was already a soft-brick back then, as the phone turned off while booting just after the installation, but 40min after it (obviously because of en empty battery, which was at 37% before installation)
At first, when the phone was plugged into the computer, the phone was booting up, showing the charging icon for a few seconds, and then was going into the infinite boot for 10 seconds, and then rebooting for the same process.
When I was charging the phone on a wall plug, the phone was just in an infinite loop.
The problem was that, when I did the Volume down + Volume up + power thing, I had a choice between Factory mode and Custom mode, but both of them led me to a black screen, and the phone powered off.
I then searched how to install a custom recovery with a soft-bricked phone, and I got a tutorial on SP Flash Tool, that told me to use a MT6582 scatter file, and to select only a Recovery. I downloaded a TWRP for my phone, and then started download, retracted the battery and plugged the phone on the computer.
I got this message : "brom error s_fthnd_file_is_not_loaded_yet"
The software told me to format the Flash, which I did, and this error now became this : "BROM ERROR : S_DL_GET_DRAM_SETTING_FAIL (5054)"
The thing is that now, the soft brick is now a hard brick, and I can't get the phone to boot anymore, adb doesn't recognize my device, and after installing and reinstalling my phone drivers, no solution came out yet, so I'm hopping that you'll find a solution to help my problem
Thanks.
Regards.
Click to expand...
Click to collapse
You're going to need the firmware (not just TWRP) to fix your phone. Have you been able to download it?
Hovatek said:
You're going to need the firmware (not just TWRP) to fix your phone. Have you been able to download it?
Click to expand...
Click to collapse
using SP Tool gives directly through the USB
Hi ppl. I have problem with my Mi3. Before 2 days I installed MIUI V8 6.8.25. Then I installed TWRP and Su, and at the end of the day my phone just started to rebooting. I can put my phone in fastboot mode, but the phone can't load ROM. It's rebooting all time at Mi logo I tried with MIUI V8 6.8.25 beta and MIUI V7 V7.5.1.0 stable (in both cases ROM is installed via fastboot). I can't run recovery with Pwr+Vol Up, just fastboot with Pwr+Vol Down.... I can't shutdown my phone. It's rebooting all time, or I can leave it in fastboot mode. Thanks for any help!
Change your battery. It's always bootlooping at the logo because the board detects something wrong with the battery, and won't even let you boot to fastboot.
I'm having a similar issue where i'm only able to access fastboot and not recovery and it's bootlooping too... Have you find any fix? Please share..
Hi. I solved my problem with batery replacing. Now is everything OK. Thanks for any help
Hey
yesterday i almost bricked or maybe bricked my phone. Accidentally changed partition from B to A. Today my phone boot only to nokia logo and stuck on it
Many hours readed about this phone back to life. Recover mode not work, fastboot mode not work. This phone one chance to turn off is completly battery discharge.
If no chance to get back this phone to normal i will get throw it to trash
Classic example of a softbrick can't really call it a hardbrick tbh. PM me all of the details and I'll later make a tutorial if we manage to fix it up.
mati5000 said:
Hey
yesterday i almost bricked or maybe bricked my phone. Accidentally changed partition from B to A. Today my phone boot only to Nokia logo and stuck on it
Many hours reading about this phone back to life. Recover mode not work, fastboot mode not work. This phone one chance to turn off is completely battery discharge.
If no chance to get back this phone to normal i will get throw it to trash
Click to expand...
Click to collapse
I did the same thing.
- Downgrade to Oreo
- unlocked officially bootloader
-fastboot boot twrp.img
booted to twrp- Flashed zip on both slot with latest twrp
Changed slot A to slot B and
we have same problem.
How did you solve your issue?
Did you wait for battery-drain?
Or other combination of buttons.
I tried all the button-combination without success.
Hope you could give advice
Regards
Edit: How to solve!
I simply waited until the battery ran out
When battery was completely dead and no Nokia-logo any more
Then I charged the battery 3% juice without booting
and from there I entered recovery-mode with the help of a USB cable.
Holding the volume+ button while connecting the USB-cable
From TWRP-recovery I changed to the other inactive slot
and whooala, that's it!
I have OEM unlocked my nokia 8 boot loader by nokia official method ,
Then I decide to flash twrp and magick
When boot twrp it give an error that locked
Then I checked some forums and find a way ,
I do what is guided in that forum
Change boot slot b to a ... and I flashed twrp then I flash rom , at the end of flash slide to reboot , then I reboot but after that there is no response in device it went blank and black.....
If I connected to PC in some flash tool it show hs com 3008 and connecting sound in pc but mobile being blank and i cant even get to fast boot mode becoz device get blank ( while connected in pc if I power on or hold power but connection sound will come from my pc but no device or unknown device )
Pls help friends, really dunno what to do
Pls help !
Respond soon pls
Same as me bro.. my ta 1004 is dead after unlocking bootloader official method. And i flash boot twrp and magisk. But my phone always bootlop. I try to flash with ost la. An qfil to recover. But i stuck in download mode. And i try to flash with twrp slide load .
And my phone is dead now.. i can do anithing. My phone can turn on now... i charge it .. but still not respond
Anyone help me
Hello,
I have a bootloop on my mi note pro.
I deleted everything, wiped after that i flashed room 6.1.7 china stable and phone dosent start.
I flashed many other rooms and xiaomi still gets into recovery, its going recovery all the time if i turn on.
I can enter into fastboot there is no problem, i was flashing by oem edl, bootloader is unlocked, my pc dosent recognize device as mass storage so i cannot put any rom to it.
Well after new room flashed the xiaomi stays on logo and after 1h there is nothing more, still logo.
In recovery i can move only down by vol- i cannot move up thats normal or i had broken button?
I was trying to dismount buttons and then start my phone and i get same result... recovery.
I was trying to flash 3 other twrp, same thing.
Maybe i doing something wrong, dont know. Please help me.