Hey guys, my phone got totally stuck on a Samsung logo (neverending loop).
Yesterday I let my bro play an Angry Birds on my phone. After a while I took my phone back and to my surprise it wasn't responding. Mobile was turned on (connected to the charger) but all I could see was a black screen. I tried restarting my phone by removing battery but it didn't help at all. I got stuck at Cyanogen Mod logo everytime. Since I haven't updated my firmware in a while I decided to intstall the newest version of CM (KitKat 4.4.4 from novafusion.pl) using Odin app. After a successful installation my phone still didn't boot up, I was getting stuck on a blue CM logo. After this I wanted to wipe my cache/dalvik cache but I wasn't able to get into recovery mode (getting stuck on a TeamWin screen). Reinstalling TWRP and installing ClockWork recovery didn't have any effect. I wiped my phone using .tar file found on this forums, tried reinstalling my ROM recovery many times, tried installing param file (don't even know what's that) and resetting three button combination using Benzonat0r's mod. None of these things seemed to have any impact. I'm still not able to get into recovery neither boot my phone up - Samsung logo bootloop. What am I supposed to do to unbrick my phone?
On a side note my knowledge about Android phones is tiny so please consider this. Also forgive me my poor grammar, not a native English speaker here.
Guskax said:
Hey guys, my phone got totally stuck on a Samsung logo (neverending loop).
Yesterday I let my bro play an Angry Birds on my phone. After a while I took my phone back and to my surprise it wasn't responding. Mobile was turned on (connected to the charger) but all I could see was a black screen. I tried restarting my phone by removing battery but it didn't help at all. I got stuck at Cyanogen Mod logo everytime. Since I haven't updated my firmware in a while I decided to intstall the newest version of CM (KitKat 4.4.4 from novafusion.pl) using Odin app. After a successful installation my phone still didn't boot up, I was getting stuck on a blue CM logo. After this I wanted to wipe my cache/dalvik cache but I wasn't able to get into recovery mode (getting stuck on a TeamWin screen). Reinstalling TWRP and installing ClockWork recovery didn't have any effect. I wiped my phone using .tar file found on this forums, tried reinstalling my ROM recovery many times, tried installing param file (don't even know what's that) and resetting three button combination using Benzonat0r's mod. None of these things seemed to have any impact. I'm still not able to get into recovery neither boot my phone up - Samsung logo bootloop. What am I supposed to do to unbrick my phone?
On a side note my knowledge about Android phones is tiny so please consider this. Also forgive me my poor grammar, not a native English speaker here.
Click to expand...
Click to collapse
Download This rom "I8190 серв. укр.rar" from here
Unpack .rar and open Odin.
Select the goldenxx.pit to [PIT]
Select CODE_I8190XXAMA2_809600_REV00_user_low_ship.tar.md 5 to [PDA]
Select CSC_QXE_I8190QXEAMA1_20130109.163004_REV00_user_lo w_ship.tar.md5 to [CSC]
Put your phone in download-mode and connect it to computer.
Hit [Start] when device is detected by Odin.
You will end up with a "La'Fleur" branded phone, but no worries!
Just go to download mode again and flash a custom recovery and after that a ROM of your choice.
The three button combo will still work!!
This is not my work, give my friend @tyson a thanks for that!
I tried installing stock recovery and ROM. After completed installation I finally managed to pass Samsung screen. I got to the something like Android installation screen and my phone suddenly shut down. Now it's totally bricked, I can't turn it on nor get into the download mode. Charging progress doesn't show up while phone is plugged in neither. Any help?
moonryder said:
Download This rom "I8190 серв. укр.rar" from
Unpack .rar and open Odin.
Select the goldenxx.pit to [PIT]
Select CODE_I8190XXAMA2_809600_REV00_user_low_ship.tar.md 5 to [PDA]
Select CSC_QXE_I8190QXEAMA1_20130109.163004_REV00_user_lo w_ship.tar.md5 to [CSC]
Put your phone in download-mode and connect it to computer.
Hit [Start] when device is detected by Odin.
You will end up with a "La'Fleur" branded phone, but no worries!
Just go to download mode again and flash a custom recovery and after that a ROM of your choice.
The three button combo will still work!!
This is not my work, give my friend @tyson a thanks for that!
Click to expand...
Click to collapse
Hey dude, I wish I saw your reply earlier. If my phone wasn't bricked now I'd give it a shot.
Related
Hello!
I've got a little/big problem with my phone...
first of all im using this: http://forum.xda-developers.com/showthread.php?t=1748984 instead of cwm.
And yesterday i tried to flash a new ROM. First all went pretty good, but the play store was bugged. So i did a new wipe and flashed again, but ofc it was stuck in the bootanimation, so i plugged out the battery... and now all that comes up is first the LG-logo, then the teamwin logo, then it's stuck showing the temwin logo... So i can't flash a new rom, i cant get into recovery mode and when i try to use smartflash on my pc the S/W upgrade wont appear while pressing vol down + pluggin the usb cable, instead the phone is black, the lg logo appears and then it's black again, and it repeats.
Any help or suggestions would be so nice of you!
never use that recovery method, always use CWM non touch version. i think you should nvflash
Use NVflash, me same one time!
Before using rhe nvflash method, try flashing CMW to your phone again. Go to Rusty's CMW thread in the Development section and download it from there.
Sent from Arkam Asylum
I rooted my mums ace using this method. However I didn't install CWM, I just went straight ahead and stupidly installed the .zip straight from the recovery mode utility. I'm trying to install this ROM.
Now I'm stuck at this step and I think I may have softbricked it.... Youtube clip below:
http://youtu.be/gB-mfeePNRA
Basically it turns on, the sammy logo comes up and then it goes red and lines out. Then it just sits there with the backlight on.
I have a download jig at hand if I need it, so I can access download mode and I have the SD card to use.
Update: installed CWM through the .zip recovery file. i then installed the ROM above and it's now just stuck at the boot logo, with the cyanogenmod blue circle swirling around.
djdanster said:
I rooted my mums ace using this method. However I didn't install CWM, I just went straight ahead and stupidly installed the .zip straight from the recovery mode utility. I'm trying to install this ROM.
Now I'm stuck at this step and I think I may have softbricked it.... Youtube clip below:
http://youtu.be/gB-mfeePNRA
Basically it turns on, the sammy logo comes up and then it goes red and lines out. Then it just sits there with the backlight on.
I have a download jig at hand if I need it, so I can access download mode and I have the SD card to use.
Update: installed CWM through the .zip recovery file. i then installed the ROM above and it's now just stuck at the boot logo, with the cyanogenmod blue circle swirling around.
Click to expand...
Click to collapse
Did you factory reset in recovery?
Sent from my GT-S5830 using Tapatalk 2
Yep, it did nothing. I'm guessing that when I flashed the CM10 ROM it cleaned out the factory reset.
Ok, panic over!
I managed to get this ROM working.
Hey,
I had the cm9 on my I9001, now i want to have the stock rom, i downloaded the Stock rom, ArriesVE.ops, and Odin.
Than i flashed the ROM on my phone, after this was done, it restarts, i can see the White Samsung Logo , after this i see the "Samsung Galaxy S Plus" Logo, this logo stays for a few seconds and than my phone restarts again and all repeats..
What should I do
Maybe this would help you http://broodplank.net/old/flashsamsungi9001.php
Same Thing...
Gnampf7 .. did u find a way past that.... have been stuck @ de same point whole day now... flashed the stock ROM thrice... cleared cache... cant do a factory reset thou... its asking for a passcode i dont have.
any ideas??
Bootloop on i9001
Hi guys, i gonna tell you about how my i9001 was stuck in a bootloop. Maybe you could help me. I'm sick of it.
Cause: I installed cm10 and cwm5 or 6 as recovery and upgrade my device by using Ota Updater. When I restarted my i9001, it got stuck in a bootloop.
What my i9001 can display: It can access to rampdump mode and download mode. In case I try to turn on my i9001 or access to recovery mode the Samsung logo is shown twice. It often gets stuck showing the typical grey battery flat (with a loading stopped) and the black screen alternately.
Attempts: i've tried everything except for the right solution. Lots of forum threads and nothing works for me. I've tried:
1.- Boot_loader for device boot.
2.- I've flashed an stock rom: XXKQP, and 2 more: BVKPC y XXKQ1. Each one are official.
3.- And then recovery-clockwork-5.5.0.4 and -6.0.1.2.
4.- I've tried, then, flashing feamodrecovery 1.2.
5.- Nothing works for me.
I've been using Odin 4.43. AriesVE in OPS section and when flashing these roms: one package. For recovery packeges: one package and pda (I tried these two options).
I can't reach at recovery mode. Any help would be greatly appreciated. Greetings!
http://forum.xda-developers.com/showpost.php?p=51290392&postcount=13
Hello,
First of all, sorry for my english as it is not my mother language
I've tried today flashing CM13 on my Wiko Rainbow, but I either failed following the instructions or the files I had were corrupted, leading to a never-ending boot.
I don't know if it was already a soft-brick back then, as the phone turned off while booting just after the installation, but 40min after it (obviously because of en empty battery, which was at 37% before installation)
At first, when the phone was plugged into the computer, the phone was booting up, showing the charging icon for a few seconds, and then was going into the infinite boot for 10 seconds, and then rebooting for the same process.
When I was charging the phone on a wall plug, the phone was just in an infinite loop.
The problem was that, when I did the Volume down + Volume up + power thing, I had a choice between Factory mode and Custom mode, but both of them led me to a black screen, and the phone powered off.
I then searched how to install a custom recovery with a soft-bricked phone, and I got a tutorial on SP Flash Tool, that told me to use a MT6582 scatter file, and to select only a Recovery. I downloaded a TWRP for my phone, and then started download, retracted the battery and plugged the phone on the computer.
I got this message : "brom error s_fthnd_file_is_not_loaded_yet"
The software told me to format the Flash, which I did, and this error now became this : "BROM ERROR : S_DL_GET_DRAM_SETTING_FAIL (5054)"
The thing is that now, the soft brick is now a hard brick, and I can't get the phone to boot anymore, adb doesn't recognize my device, and after installing and reinstalling my phone drivers, no solution came out yet, so I'm hopping that you'll find a solution to help my problem
Thanks.
Regards.
MichelFou said:
Hello,
First of all, sorry for my english as it is not my mother language
I've tried today flashing CM13 on my Wiko Rainbow, but I either failed following the instructions or the files I had were corrupted, leading to a never-ending boot.
I don't know if it was already a soft-brick back then, as the phone turned off while booting just after the installation, but 40min after it (obviously because of en empty battery, which was at 37% before installation)
At first, when the phone was plugged into the computer, the phone was booting up, showing the charging icon for a few seconds, and then was going into the infinite boot for 10 seconds, and then rebooting for the same process.
When I was charging the phone on a wall plug, the phone was just in an infinite loop.
The problem was that, when I did the Volume down + Volume up + power thing, I had a choice between Factory mode and Custom mode, but both of them led me to a black screen, and the phone powered off.
I then searched how to install a custom recovery with a soft-bricked phone, and I got a tutorial on SP Flash Tool, that told me to use a MT6582 scatter file, and to select only a Recovery. I downloaded a TWRP for my phone, and then started download, retracted the battery and plugged the phone on the computer.
I got this message : "brom error s_fthnd_file_is_not_loaded_yet"
The software told me to format the Flash, which I did, and this error now became this : "BROM ERROR : S_DL_GET_DRAM_SETTING_FAIL (5054)"
The thing is that now, the soft brick is now a hard brick, and I can't get the phone to boot anymore, adb doesn't recognize my device, and after installing and reinstalling my phone drivers, no solution came out yet, so I'm hopping that you'll find a solution to help my problem
Thanks.
Regards.
Click to expand...
Click to collapse
You're going to need the firmware (not just TWRP) to fix your phone. Have you been able to download it?
Hovatek said:
You're going to need the firmware (not just TWRP) to fix your phone. Have you been able to download it?
Click to expand...
Click to collapse
using SP Tool gives directly through the USB
Hi all,
I have put myself in horrible situation look like phone is bricked . I can not start my phone in recovery or download mode even.
here are the series of step I had performed:
1)Unlock bootloader and intalled latest twrp-3.0.2-1-h815.img 16.5M 2016-09-15 07:23:54 EDT for ( since 815/811) has same twrp on twrp website.
2) tried to install lineage OS rom for 811 but the recovery gave me problem that device is 815. Please install 815 rom, so I flashed 815 and it flashed fine and device booted and worked fine.
3)Now the problem starts, it crashed after some time and stuck in boot loop.
4)I had tried to boot in recovery and tried to restore back up image, but it crashed in the middle and after that I was not able to start to recovery.
5) Then I used the LG UP and flash kdz file H811V20r_00_0111.kdz for stock rom.
6) It flashed successfully, but device never got boot up and now I am unable to go to download mode.
7) Displaying small download mode symbol but device is stuck on the symbol and not going to Download mode.
I am stuck now, Is there any solution to come out of it. Please help me.
Thanks
Now my phone starts into download mode, and I flashed the original kdz h81120v_00_0425 using download mode, after flashing first time, it went to opitmizing Apps screen but restated in middle.
After that I tried multiple times sing hard reset, but it always freeze on 2nd screen when I press yes to reset.
I flashed kdz multiple time using LG up, but it stuck on LG logo with unlocked boot loader msg. not going to the bootloop.
Current condition is now I am unable to enter download mode it respond but freeze before entering download.
I can not hard reset as it always freezes on 2nd hard reset screen and not formatting.
No charging.
I am not sure, If this is some hardware issue or emmc fault , Please help me on this..
droidprav said:
Hi all,
I have put myself in horrible situation look like phone is bricked . I can not start my phone in recovery or download mode even.
here are the series of step I had performed:
1)Unlock bootloader and intalled latest twrp-3.0.2-1-h815.img 16.5M 2016-09-15 07:23:54 EDT for ( since 815/811) has same twrp on twrp website.
2) tried to install lineage OS rom for 811 but the recovery gave me problem that device is 815. Please install 815 rom, so I flashed 815 and it flashed fine and device booted and worked fine.
3)Now the problem starts, it crashed after some time and stuck in boot loop.
4)I had tried to boot in recovery and tried to restore back up image, but it crashed in the middle and after that I was not able to start to recovery.
5) Then I used the LG UP and flash kdz file H811V20r_00_0111.kdz for stock rom.
6) It flashed successfully, but device never got boot up and now I am unable to go to download mode.
7) Displaying small download mode symbol but device is stuck on the symbol and not going to Download mode.
I am stuck now, Is there any solution to come out of it. Please help me.
Thanks
Click to expand...
Click to collapse
droidprav said:
Now my phone starts into download mode, and I flashed the original kdz h81120v_00_0425 using download mode, after flashing first time, it went to opitmizing Apps screen but restated in middle.
After that I tried multiple times sing hard reset, but it always freeze on 2nd screen when I press yes to reset.
I flashed kdz multiple time using LG up, but it stuck on LG logo with unlocked boot loader msg. not going to the bootloop.
Current condition is now I am unable to enter download mode it respond but freeze before entering download.
I can not hard reset as it always freezes on 2nd hard reset screen and not formatting.
No charging.
I am not sure, If this is some hardware issue or emmc fault , Please help me on this..
Click to expand...
Click to collapse
thats not latest TWRP... latest unified h815- h811 name is twrp-3.1.1-0-g4 official
2) tried to install lineage OS rom for 811 but the recovery gave me problem that device is 815. Please install 815 rom, so I flashed 815 and it flashed fine and device booted and worked fine. why if you know its h811.. or is it.??
5) Then I used the LG UP and flash kdz file H811V20r_00_0111.kdz for stock rom. did you select refurbished .? this will clean wipe all partitions/
not sure how to help .. but next time search for uppercut// LGUP// and itll point you to file needed..
is it a h811 or h815.. could be that outside case is switched.?
raptorddd said:
thats not latest TWRP... latest unified h815- h811 name is twrp-3.1.1-0-g4 official
2) tried to install lineage OS rom for 811 but the recovery gave me problem that device is 815. Please install 815 rom, so I flashed 815 and it flashed fine and device booted and worked fine. why if you know its h811.. or is it.??
5) Then I used the LG UP and flash kdz file H811V20r_00_0111.kdz for stock rom. did you select refurbished .? this will clean wipe all partitions/
not sure how to help .. but next time search for uppercut// LGUP// and itll point you to file needed..
is it a h811 or h815.. could be that outside case is switched.?
Click to expand...
Click to collapse
I know I have done few things wrong in confusion, but realized later on. It is H811 TMO model for sure.
I did select refurbished while using LG UP
My phone is not completely dead.
Pressing power button it stuck on LG logo with unlocked boot loader msg. not going to the bootloop.
I am unable to enter download mode, it responds but freeze before entering download showing 4 blue dots.
I am able to enter recovery but I can not hard reset as it always freezes on 2nd hard reset screen and not formatting.
No charging, Device Manager shows nothing.
Is there a way to recover??
I am not sure, If this is some hardware issue or emmc fault , Please help me on this..
I'm in the same situation.
I tryed to install h81120v kdz and did it perfectly, but when the phone restarted... bootloop!
And now, if I try to enter in Download Mode, a message 'Download Mode' appear with 5 blue dots and nothing else.
My computer don't recognize it
I tryed the Unbrick method with SD Card but still the same
ReDemonBR said:
I'm in the same situation.
I tryed to install h81120v kdz and did it perfectly, but when the phone restarted... bootloop!
And now, if I try to enter in Download Mode, a message 'Download Mode' appear with 5 blue dots and nothing else.
My computer don't recognize it
I tryed the Unbrick method with SD Card but still the same
Click to expand...
Click to collapse
exactly same problem here but i managed to get out of 9008 brick by ls991 files now i have no download mode and only a charge before turning on message on the screen really pissed off now