Change Softkey Usage - Touch Diamond, MDA Compact IV General

I would like to use my right hand softkey to run a specific application - namely PI Agenda.
I know I can use DiamonTweak to change the softkey but it only gives me certain options. Is there any way I can define the softkey to open a certain app or is there a way to add to the list of apps that DiamonTweak offers for the softkeys? Perhaps putting a shortcut to the app somewhere or by adding a registry entry?
Thanks

There's a registry entry that changes the actual softkey use, I can't think what it is offhand.
You could use Schaps Advanced Configuration Tool or Fantastic Bytes SoftKey Manager - they both do this setting better than DiamondTweak.

elziko said:
I would like to use my right hand softkey to run a specific application - namely PI Agenda.
I know I can use DiamonTweak to change the softkey but it only gives me certain options. Is there any way I can define the softkey to open a certain app or is there a way to add to the list of apps that DiamonTweak offers for the softkeys? Perhaps putting a shortcut to the app somewhere or by adding a registry entry?
Thanks
Click to expand...
Click to collapse
You can do that in the registry
[Mobile Device\HKEY_LOCAL_MACHINE\Software\HTC\Manila\HomeLSKPath] for Left key
[Mobile Device\HKEY_LOCAL_MACHINE\Software\HTC\Manila\HomeRSKPath] for Right key
Here you have to put the whole string to you application, I made one for TomTom:
(\Intern geheugen\Programmabestanden\Navigator\TomTom Navigator.exe)

Excellent, thanks!

you need to change the text too: http://www.fuzemobility.com/?p=1611

Related

Today screen softkeys

How do I set these to point to apps I want? PI2007 has hijacked them for itself - but I'd like to have one allocated to PocketCM (Nice software)
Can't find the option in the settings (or am I just blind?)
Graham
gf_gollum said:
How do I set these to point to apps I want? PI2007 has hijacked them for itself - but I'd like to have one allocated to PocketCM (Nice software)
Can't find the option in the settings (or am I just blind?)
Graham
Click to expand...
Click to collapse
I'm not sure what you're talking about, but search this forum for Softkey Changer. With that you can easily change your softkeys.
Just place a shortcut to PocketCM in the Programs folder, to be able to select it from Softkey Changer. (Only shortcuts from the Programs folder are available in Softkey Changer)
Thx - I'll look into it

[SOLVED] PocketCM

In Touchflo3D, I'd like to replace the contact manager by pocketCM (replacement for the left quick launch button).
Does anyone knows how to do this ?
Araldwenn said:
In Touchflo3D, I'd like to replace the contact manager by pocketCM (replacement for the left quick launch button).
Does anyone knows how to do this ?
Click to expand...
Click to collapse
try this
Here is the way to change the homekeys IN TFLO 3D.
In a registry editor, go to:
HKLM/Software/HTC/manila/
Here is:
HomeLSKPath, which is the left softkey (Standard = Phonepad)
And
HomeRSKPath, which is the right softkey.
If you change these with the location of the programs you want to link to, and simultaneous change the names:
HomeLSKText = Left softkey text
And
HomeRSKText = Right softkey text.
hope it help
I try this, thanks
I had a look at these keys. But what i don't understand is that there's different tabs, and so different softkeys for each one, and only one value in the registry. So if I manually enter the adress and the name, not sure it will work, or if it does, i'll certainly have the same hotkey everywhere... but i only want to replace the left softkey in the contact tab...
Hi do you have a black skin for the diamond, I just found a white one (with the correct resoluton).
Thanks,
Pierro
try this one :
http://pocketcm.com/phorum/read.php?22,8595
Thanks,
Pierro
Araldwenn said:
In Touchflo3D, I'd like to replace the contact manager by pocketCM (replacement for the left quick launch button).
Does anyone knows how to do this ?
Click to expand...
Click to collapse
The PocketCM FAQ...
How to add this application as the default contact manager?
Easiest way: download and install the CAB version of PocketCM.
You can also do it by hand:
Go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shell\Rai\:MSCONTACTS
Change "String 1" value from :MSPOUTLOOK contacts to "\Program Files\PocketCM\PocketCM.exe".
Make sure that you add the "" on the new entry.
Also...
Go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shell\Rai\:MSPOUTLOOK
Change "String 1" value from "poutlook.exe" to "\Program Files\PocketCM\PocketCM.exe".
without the "" on the entry.
then reset or re-start your Diamond
mukerian said:
The PocketCM FAQ...
How to add this application as the default contact manager?
Easiest way: download and install the CAB version of PocketCM.
You can also do it by hand:
Go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shell\Rai\:MSCONTACTS
Change "String 1" value from :MSPOUTLOOK contacts to "\Program Files\PocketCM\PocketCM.exe".
Make sure that you add the "" on the new entry.
Also...
Go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shell\Rai\:MSPOUTLOOK
Change "String 1" value from "poutlook.exe" to "\Program Files\PocketCM\PocketCM.exe".
without the "" on the entry.
then reset or re-start your Diamond
Click to expand...
Click to collapse
Before posting this, i'd already search on PocketCM faq... not a noob...
What I want is changing the softkey on Touchflo3D interface : it has nothing to do with softkey on Today's screen.
I think shonan70 was closer to the solution.
Finally found the solution by myself :
http://forum.xda-developers.com/showthread.php?t=407777
A little app that allow to change default apps in TF3D by the ones you choose...
It rocks !

Remap soft keys in TF3D?

IS there a small piece of software to remap the softkeys on the home screen in TF3D? There are several useful functions that could be placed on the home screen other than the default Phone/Programs. I've tried using the Remap Softkeys for WM5 but obviously that doesn't work with TF3D, and I don't want to disable Touchflow just to get altered keys.
nubbin said:
IS there a small piece of software to remap the softkeys on the home screen in TF3D? There are several useful functions that could be placed on the home screen other than the default Phone/Programs. I've tried using the Remap Softkeys for WM5 but obviously that doesn't work with TF3D, and I don't want to disable Touchflow just to get altered keys.
Click to expand...
Click to collapse
try this
In a registry editor, go to:
HKLM/Software/HTC/manila/
HomeLSKPath, which is the left softkey (Standard = Phonepad)
And
HomeRSKPath, which is the right softkey.
If you change these with the location of the programs you want to link to, and simultaneous change the names:
HomeLSKText = Left softkey text
And
HomeRSKText = Right softkey text.
Thanks very much - worked a treat!
I'm trying to remap my softkeys on the People page. I want FunContact as my primary contact manager launchable from that page... cant seem to get it done with the technique used here... I had to create a new key for it but still nothing after soft reset
any help would be GREAT! Thanks
itsallsubliminal said:
I'm trying to remap my softkeys on the People page. I want FunContact as my primary contact manager launchable from that page... cant seem to get it done with the technique used here... I had to create a new key for it but still nothing after soft reset
any help would be GREAT! Thanks
Click to expand...
Click to collapse
i second that!!!
default contact is hard to use and scrolling is suck!
Try this link, it has more info about remapping soft keys in Manilla (TF3D) and also (TF2D)
http://forum.xda-developers.com/showpost.php?p=3292483&postcount=2
or the whole thread which has other good info.
http://forum.xda-developers.com/showthread.php?t=480475
Hope this works for you!
so this is for the right soft key:
TouchFlo 3D right softkey:
HKEY_LOCAL_MACHINE\Software\HTC\Manila
HomeRSKText = Text on softkey
HomeRSKPath = Path to program to run (or blank for default)
what do i put in the open "open" part so i can have my contacts open? and for the text to i just set it as "Contacts"?
Click to expand...
Click to collapse
its Windows/AppButtons/Contacts.lnk
I can't get it to work
Okay ... I've read all the post that I could find about changing the softkeys and nothing seems to work. I've changed the registry settings as indicated but still no go. I have the TMO TP2. I only want to change the home page so don't need anything fancy. Been updating the registry settings (HomeLSKText, HomeLSKpath, HomeLSKArguments) and can't get it to actually do anything (the text changes). What I want todo is to jump to the Contacts HTC page (really anything other than the Camera - why TMO did you make it Camera?). Any help would be great. Thanks.

Icon Viewer and Change PTT Button Icon

This is kind of a small thing, but when I remap the Buttons in Settings I thought it would be nice if the button icon reflected the actual program to which it was mapped or an icon of my choosing. I know, “picky, picky, picky”.
I noticed that in the various keys there is an icon sub-key which lists the program and an offset value where the icon is located for that program.
All that you have to do is enter the location of the icon and the offset.
Easy, except that the offset is not always the same location and the icon may be in something other than the .exe like a Control Panel applet (.cpl) or .dll or you may want a different icon than the standard one.
The solution that worked for me was to use a program called RViewer by Vicott Wong to look at the icons. He also has an icon resource file that has some sample icons in it that you could use. There are some other resource files listed also.
http://www.ppcsg.com/index.php?showtopic=80127 for the program and a tutorial.
His program will extract icons and do some other stuff but all I wanted it for was to find where the icons were in a .exe, .dll or .cpl. which his program does and allows you to browse to find the icon and the offset. He shows in his tutorial how to change shortcut icons also, which may be even more fun than this.
I wanted to change three icons.
The first was the envelope on Button 2 since I had mapped that to a [Toggle Screen] process which is included with Wisbar Advance 3 by Chris McKay. (http://lakeridgesoftware.com/ ) This turns the screen completely off when desired.
The [Toggle Screen] was controlled by a WAProc.exe program in the Programs folder but it had no icons I wanted to use so I chose the one from Backlight.exe in the windows folder. In the “HKLM\Software\Microsoft\Shell\Keys\40C2\Icon” sub-key I put “\windows\Backlight.exe, 101” in the String Value.
The next one was Button 6 which I assigned to Comm Manager and assigned the String Value “CommManager.exe, 101” in the 40C6 Icon sub-key.
The last one was button 6 (Hold) which I assigned to Voice Command. The 40C7 sub-key didn’t have an Icon sub-key so I just copied and pasted the one from 40C6 and gave it a String Value of “\Windows\VoiceCommand_PPC.cpl, 1” (Of course, no quotes used in the String Values)
WARNING: Once you start looking at all the different icons available you can easily waste a couple of hours just looking around.
Here is the result when I go to Buttons on settings:

Problem selecting text

I noticed a strange problem.
Inside text editing application that do not warp lines (Orneta Notepad Mobile and any other notepad style application I tried) text selection (with stylus tap and drag) only works when lines a short and orizontal scroll bar is missing or disabled. When lines are longer and orizontal scroll bar appears text selection is no more possible.
Does anyother noticed this problem?
Any solution?
Selecting text works not so fine anymore.
When I hold the syles on the screen sometimes it works, but not oke.
Or when I hit with the styles on a word he selected that word.
With me other WM phones (HTC to) it was possible selecting, copy, paste in most places. It was very simple te select a pease of tekst.
Does HTC running a app that has a conflict with the WM selecting option?
I have searching registry if there is maybe a key to change.
I don't like the slecting way on the Diamond2.
I hope someone find out what the problem can be.
janegsm said:
Selecting text works not so fine anymore.
Click to expand...
Click to collapse
True.
KraFT
I found a partial solution: there is a way to make a list of applications that should be ignored by TouchFlo. Inside these applications scroll by tap and drag stop working but text selection does work.
Find the registry key HKLM\Software\OEM\TFLOSettings\TFLOIgnoreAPPs
For any application that you want TouchFlo ignore create a string value and assign to it the name of the application .exe file (important: the value seems to be case sensitive)
For example in my case for Orneta Notepad Mobile
HKLM\Software\OEM\TFLOSettings\TFLOIgnoreAPPs\IgnoreAppNP = "NOTEPAD.exe"
Thanks, it works.
I have now add strings with poutlook.exe, PIMConnectivity.exe, Notepad.exe and Explorer.exe (resco) .
In those apps it works now fine.

Categories

Resources