hey you guys
i'm having trouble when removing files from OEM and SYS folders.
After I've deleted all that i want to get rid of from my rom, reconstruct it, and flash the rom to my device, i always get .cab errors.
ex. i decided to get rid of bejeweled and it says that the bejeweled .cab cannot be found and then it freezes with that on the screen. i have to soft reset it and when i do that, it doesn't get to complete the files installation so i only have half of my intended content installed on the phone.
any advice?
I had this problem and found the cabs are executed by config_AP.txt in the Config_Ap folder in OEM.
Just delete the line you don't want executing, example below
Code:
CAB: \WINDOWS\XperiaRadio_R12_28924_signed.CAB
CAB: \WINDOWS\GoogleMaps-ms-sonyericsson_emb.cab
CAB: \WINDOWS\GooglePanel_UK_R12_5_29082.cab
CAB: \WINDOWS\MxpDeploy.CAB
CAB: \WINDOWS\WM6.1_PPC_dawn_Opera_2141.cab
CFG: \WINDOWS\config_end.txt
Sweetness! I thank you, kind sir.
I'll give it a try.
oh... does anyone know where in oem and sys i can remove windows live, messenger, help, getting started, streaming media, tasks, and internet sharing?
Related
I found this new rom on the ftp and I don't like it.
1) Its not an orginal ship.exe
2) the nbfs have been modified and now read T-MOB101
3) The ext rom has splash screens from qtek and kpn
4) the header info of the CE rom reads 1.22.00 and not 1.31.00
5) Its a type I rom which I find hard to believe as its ment to be a 1.31.00
The file can be found in uploads I will not move it or add it to wiki untill I see an original ship.exe. I also have not added a link. Use at own risk
XDA_IIs_Chinese_CHT_1.31.00_ ExtRom_1.31.900_Radio_1.08.00.rar
Please be kind enough to only upload original ship.exe or else define them as baked. (added nbfs from other sources)
config.txt extracted out of ms_.nbf with new tool
EXEC:\Extended_ROM\TPDisable.exe
CAB: \Extended_ROM\Caller_ID_BlueAngel_Generic_CHT_RC15.CAB
CAB: \Extended_ROM\Caller_ID_BlueAngel_Generic_CHT_RC15_Reg.CAB
CAB: \Extended_ROM\Camera_Wizard_BlueAngel_CHT_RC16.CAB
CAB: \Extended_ROM\Camera_Wizard_BlueAngel_CHT_RC16_REG.CAB
CAB: \Extended_ROM\HTC_PR_Camera_CHT_reg.CAB
CAB: \Extended_ROM\MIDI561.CAB
CAB: \Extended_ROM\MIDI_CHT_reg.CAB
CAB: \Extended_ROM\MMS_v2.0.0.16_BA_CHT_20041115.CAB
CAB: \Extended_ROM\ClearVue2.4.386_CHT.CAB
CAB: \Extended_ROM\TaoJava10.1.2.49_CHT_BA_0823.sa.CAB
CAB: \Extended_ROM\DialerSkin_Portrait_091104.sa.CAB
CAB: \Extended_ROM\DialerSkin_Landscap_091104.sa.CAB
CAB: \Extended_ROM\After_Sales_Service_091304.sa.CAB
CAB: \Extended_ROM\O2ASIA_WWE_Customization_0923.CAB
CAB: \Extended_ROM\default.sa.CAB
CAB: \Extended_ROM\o2_connect_iis.cab
CAB: \Extended_ROM\O2_Base_101904_CHT.sa.CAB
CAB: \Extended_ROM\BA_O2Asia_PA_Remove_WiFi_Logo_CHT.sa.CAB
CAB: \Extended_ROM\O2Asia_hhcb2117_ECall_StartMenU_CHT.sa.CAB
CAB: \Extended_ROM\O2Auto.sa.CAB
CAB: \Extended_ROM\LoadDialogInit_MS_10150402.sa.CAB
CAB: \Extended_ROM\Version_BA_131.sa.CAB
CAB: \Extended_ROM\BandSel_BACHT_12210401.sa.CAB
CAB: \Extended_ROM\O2AC_Wmodem_Xbackup.sa.CAB
EXEC:\Extended_ROM\SetButtonLock.exe
EXEC:\Extended_ROM\Set_DefaultLCID.exe
EXEC:\Extended_ROM\TPEnable.exe
CPY1:\Extended_ROM\Autoconfig.txt
CPY2:\Windows\Autoconfig.txt
EXEC:\Windows\Autoconfig.exe
RST: Reset
Its an orginal ship.exe, I reload last night
The ext.ROM which max with O2 Asia Rom , I will post tonight
Hi mwang
Its an orginal ship.exe, I reload last night
Click to expand...
Click to collapse
It can't be as the rar is an ship.exe extraction with a change,bat and the xda3nbtool in it. The files have been modified with T-MOB101, and the rest of what I said in post 1 is still true
I downloaded it again 10 mins ago (XDA_IIs_Chinese_CHT_1.31.00_ ExtRom_1.31.900_Radio_1.08.00)
If I upload this as an original and somebody that has o2 asia CHT will try to flash it with the wrong operator code,
-> then he will post "I get opcode error on upgrade"
-> we will say "try an original ship.exe"
-> he will say "I am"
and... Well we will say "Sorry about that wiki is not what it once was".
What we neeed is the Untouched ship.exe the one with the 02_ASIA code in it, else I a call it a baked rom.
MDAIIIUser said:
Hi mwang
Its an orginal ship.exe, I reload last night
Click to expand...
Click to collapse
It can't be as the rar is an ship.exe extraction with a change,bat and the xda3nbtool in it. The files have been modified with T-MOB101, and the rest of what I said in post 1 is still true
I downloaded it again 10 mins ago (XDA_IIs_Chinese_CHT_1.31.00_ ExtRom_1.31.900_Radio_1.08.00)
If I upload this as an original and somebody that has o2 asia CHT will try to flash it with the wrong operator code,
-> then he will post "I get opcode error on upgrade"
-> we will say "try an original ship.exe"
-> he will say "I am"
and... Well we will say "Sorry about that wiki is not what it once was".
What we neeed is the Untouched ship.exe the one with the 02_ASIA code in it, else I a call it a baked rom.
Click to expand...
Click to collapse
I got this ROM from Wiki see " Can't reboot after upgrade to XDA IIs Chinese" , work fine for me , I reload Dopod 13106_118_10600 ship Rom and extended ROM that's original.
Well thats the end of that story, i will post it as baked, thanks mwang, you are our cht man. (was there not a song about that?)
Sche sche
I am not only CHT man ,tell you the true I am Chinese from Taiwan,I email to Dopod/Taiwan ask them have any new ROM come out,they said maybe next month,if I gtet new ROM will post here.
Please Install and Soft Reset
*********** THE CAB FILE IS Below This Posts *****************
Please report if it works.
If it doesnt work then
Run this program
http://buzzdev.net/components/com_simpleboard/uploaded/files/UNI_ext_rom_unlock.rar
Then run the cab above.
Then Soft Reset.
Then Report Again.
Thanks
doesn't work on my vario, it sais can't install beceause is for a different device.
First i launched the .cab File and the Wizard says that the file is not compatible with this Model.
Then i launched the .exe file, then the .cab File again, and again the same Error Message! :?
Vario
hi,
installed fine on MDV Vario but does nothing! Am I doing something wong...
Veef13
Try #2
Please Follow the same steps as the first Post but use this Unlocker instead.
DONT FOrget to soft reset
and one more.
vbguru613 said:
DONT FOrget to soft reset
Click to expand...
Click to collapse
works like a charm on my Vario, many thanks...
Does anyone know what files in the Ext ROM in the Vario can be removed, my extended rom is showing 2.69mb used...
Thanks for a great free tool!!!
Veef
first i got wrong model error, then tried again and then it worked.
That's the way it looks now, Extended_ROM2 fully useable.
Great Hack from Buzz !!
Cheers
hrb
You did it man! Great solution.. works fine on my MDA Vario!
One Question.. can i now delete the Files from T-Mobile (customization Files)! :?:
Then i have more space in the Extented Rom!
Yes you can delete and modify the contents now.
Even after a Hard and Soft reset the Ext rom will be the same!!!!!
Thanks for the Thanks
vbguru613 said:
Please Install and Soft Reset
Please report if it works.
Click to expand...
Click to collapse
where is this file please?
http://forum.xda-developers.com/download.php?id=7783
Does it work now?
Hi VBGURU
thanx for this extended rom unlocker
its working now i wanna know what these cab files in exrom folder
here is my config file please can you let me know that what is what
Code:
SHOW:\Extended_ROM\TMO_WallPaper.bmp
LOCK:Enabled
EXEC:\Extended_ROM\cusTSK.exe \Windows\T-Mobile.tsk
CAB: \Extended_ROM\CAB-Customization-Connection-TMUK-Wizard-Aug08.CAB
CAB: \Extended_ROM\Signed_TMO_EU_UA_051003.sa.CAB
CAB: \Extended_ROM\Signed_DiscoButton8.sa.CAB
CAB: \Extended_ROM\Signed_TMUK_Cust_Wiz03000100.sa.CAB
CAB: \Extended_ROM\Signed_Wiz_NoGPRSAutoattach.sa.CAB
CAB: \Extended_ROM\Signed_BeepMode_Longtones.sa.CAB
CAB: \Extended_ROM\Signed_TMO_CameraDriverPatch.sa.CAB
CAB: \Extended_ROM\UNI_BrowserPerformance.sa.CAB
CAB: \Extended_ROM\Signed_ExtendedROM_Version.CAB
CAB: \Extended_ROM\CAB-Customization-WapPush-TMO-Wizard-Sep02-1.CAB
CAB: \Extended_ROM\Signed_Wiz_TMO_STK.sa.CAB
CAB: \Extended_ROM\CAB-Customization-TMUK-Wizard-01-04-03Oct05.CAB
CAB: \Extended_ROM\CAB-DATEamil-Wizard-TMOUK-04Aug05-DataBase.CAB
CAB: \Extended_ROM\CAB-Shortcut-TMOUK-03Oct05.CAB
CAB: \Extended_ROM\SmartDialing_enable_0915_signed.CAB
CAB: \Extended_ROM\TMO_UK_Browser_Signed.cab
CAB: \Extended_ROM\TMO_UK_pIEDefaultPage_Signed.CAB
CAB: \Extended_ROM\TMO_UK_UXC_Signed.cab
EXEC:\Extended_ROM\WifiTempON.exe
CAB: \Extended_ROM\Signed_WifiSSID.sa.cab
EXEC:\Extended_ROM\WifiTempOFF.exe
LOCK:Disabled
RST: Reset
regards
Gugi[/code]
compare to mine
LOCK:Enabled
CAB: \Extended_ROM\Signed_Version.sa.CAB
CAB: \Extended_ROM\CAB-shortcut-Qtek-14Sep05.CAB
CAB: \Extended_ROM\EnableDRM_Only.CAB
CAB: \Extended_ROM\SmartDialing_enable_0915_signed.CAB
CAB: \Extended_ROM\Cert_SPCS.cab
LOCKisabled
RST: Reset
IF you wanna hide it:
http://forum.xda-developers.com/viewtopic.php?p=185311#185311
hrb said:
That's the way it looks now, Extended_ROM2 fully useable.
Great Hack from Buzz !!
Cheers
hrb
Click to expand...
Click to collapse
))))
buzz
Hi there!
Today I've got an idea. If I unlock the extrom, install all my programs and totally config my wizard, the backup my system with SPB Backup for WM5.0, then put the backup file into the ExtROM and write a config.txt, and make a HardReset, the backup file should be installed automatically.
Or ExtROM only works with .CAB files?
EDIT:
NOW Testing.....Will post the result
How are you going to unlock the ext-rom?
risidoro said:
How are you going to unlock the ext-rom?
Click to expand...
Click to collapse
ftp://xda:[email protected]/Wizard/Unlock/Unlock Ext Rom Wizard.cab
faria said:
risidoro said:
How are you going to unlock the ext-rom?
Click to expand...
Click to collapse
ftp://xda:[email protected]/Wizard/Unlock/Unlock Ext Rom Wizard.cab
Click to expand...
Click to collapse
And what about the post AKU2 roms?
There's a fix for that, too. Don't recall where off-hand.
SuperRob said:
There's a fix for that, too. Don't recall where off-hand.
Click to expand...
Click to collapse
It doesn't work!!!
Ok. NowI have time for testing this idea. But I have some problems.
When you open the EXTRom you can see a config.txt which contains the cab configuration datas.
Like this:
CAB: \Extended_ROM\T-Mobile_Network_Customizations.cab
I'm using SPB Backup what is creates backup files in .exe format. So if I want to do a full backup and I want it to autorun after a hard reset, I must do edit this config file right?
Maybe the config file should be like this:
EXE: \Extended_ROM\Full_Backup.exe
All I mentioned here is right, or I'm wrong with something?
HyperMalac said:
Ok. NowI have time for testing this idea. But I have some problems.
When you open the EXTRom you can see a config.txt which contains the cab configuration datas.
Like this:
CAB: \Extended_ROM\T-Mobile_Network_Customizations.cab
I'm using SPB Backup what is creates backup files in .exe format. So if I want to do a full backup and I want it to autorun after a hard reset, I must do edit this config file right?
Maybe the config file should be like this:
EXE: \Extended_ROM\Full_Backup.exe
All I mentioned here is right, or I'm wrong with something?
Click to expand...
Click to collapse
youare correct,but it wont work because the spb .exe has an input dialog before starting to restore ,therefore it will crash the extended-rom when trying to install the .exe,the solucion is to hack the .exe file and remove the dialog input so it can install witout any user help.
faria said:
youare correct,but it wont work because the spb .exe has an input dialog before starting to restore ,therefore it will crash the extended-rom when trying to install the .exe,the solucion is to hack the .exe file and remove the dialog input so it can install witout any user help.
Click to expand...
Click to collapse
Not 100% sure on this as I have not tested it but could you not unlock the LCD while running the EXE then lock it afterwards if needed?
Something like.
Code:
LOCK:Enabled
CAB: \Extended_ROM\1.cab
CAB: \Extended_ROM\2.cab
LOCK:Disabled
EXEC:\Extended_ROM\backup.exe
RST: Reset
or may be copying it to the MiniSD or internal storage would work better?
Code:
LOCK:Enabled
CAB: \Extended_ROM\1.cab
CAB: \Extended_ROM\2.cab
CPY1:\Extended_ROM\backup.exe
CPY2:\Somewhere_On_Device\backup.exe
LOCK:Disabled
EXEC:\Somewhere_On_Device\backup.exe
RST: Reset
Not tested any of this as I just use OMA and CAB's to do all I need but it's just an idea.
djwillis said:
faria said:
youare correct,but it wont work because the spb .exe has an input dialog before starting to restore ,therefore it will crash the extended-rom when trying to install the .exe,the solucion is to hack the .exe file and remove the dialog input so it can install witout any user help.
Click to expand...
Click to collapse
Not 100% sure on this as I have not tested it but could you not unlock the LCD while running the EXE then lock it afterwards if needed?
Something like.
Code:
LOCK:Enabled
CAB: \Extended_ROM\1.cab
CAB: \Extended_ROM\2.cab
LOCK:Disabled
EXEC:\Extended_ROM\backup.exe
RST: Reset
or may be copying it to the MiniSD or internal storage would work better?
Code:
LOCK:Enabled
CAB: \Extended_ROM\1.cab
CAB: \Extended_ROM\2.cab
CPY1:\Extended_ROM\backup.exe
CPY2:\Somewhere_On_Device\backup.exe
LOCK:Disabled
EXEC:\Somewhere_On_Device\backup.exe
RST: Reset
Not tested any of this as I just use OMA and CAB's to do all I need but it's just an idea.
Click to expand...
Click to collapse
yes change to LOCK to [Disabled] or put 2 spaces betwin lock and enable in the config file] and it works ,but the there is a a screen stoping you from accessing the dialog even if you press start it will not go away thats was my experience with the program called wm5torage so i hacked it with an hex editor a now installs great.
maybe your extended rom is diferent [since there is many versions] and will let you input ,i know it use to work in the pda2k extended-rom,let me know the results.
OK, so I finally got curious enough to cook my own ROM then added it to Ell82's AKU3.2 ROM and stumbled across something pretty cool...I followed Faria's instructions (turns out not very well...) and added a cab with spaces (I know, I know, freakin noob...). Anyway, it apparently just skipped over that cab and kept going. Now here's the cool part, the total cabs I added to my ROM was only 2.6 MB so I thought I was OK. Didn't pay close enough attention until later and realized the nk.nbf file was about 10.5 MB. When faria says the Ext Rom shoudl be less than 9.5 MB, is he talking the total of all the cabs, or the nk.nbf file???
Bottom line is even though the nk.nbf file was 10.5 MB it installed and ran fine on AKU3.2 (except for the cab with spaces). I then tried to load this into Molski's 2.26 ROM and the ExtROM wouldn't take. Went back and fixed the cabs with spaces and it still won't take.
This leads me to the initial conclusion that the AKU3.2 ROM allows you to exceed the 9.5MB limit. Can anyone else confirm this?
total n00b for sure... (not flaming)
when you make an extended rom it defaults to a size of around 10meg, no matter whats in there.. you could have 1 [email protected] 10k or 500 [email protected] 10.5meg (just cant go over the 10 meg limit).. so if you have 1 cab then no matter what the size is automatically 10meg.. everything in the rom is addressed my memory locations, everything has a set start and end address
and you can prevent cabs from being installed by removing them from the config.txt
OK, then help a ROM-cooking n00b out. Faria's tutorial mentions the instructions were tested up to the 2.24 ROMs--anything that would cause a problem with his ext-rom-base on a 2.26 ROM? I just can't get it to install. The ExtROM is not corrupt because I can manually install each cab in the ExtROM using total commander, but can't get them to install from hard-reset...
jorge_culv said:
OK, then help a ROM-cooking n00b out. Faria's tutorial mentions the instructions were tested up to the 2.24 ROMs--anything that would cause a problem with his ext-rom-base on a 2.26 ROM? I just can't get it to install. The ExtROM is not corrupt because I can manually install each cab in the ExtROM using total commander, but can't get them to install from hard-reset...
Click to expand...
Click to collapse
well actually the ext rom could be corrupt.. i have had that problem before(actually with my latest UWC beta, which caused almost a week long delay).. all cabs would install manually but the ones listed in the config.txt wouldnt install at all... what cabs are you trying to install that arent? and what does the contents of your config.txt look like?
Thanks for the help ShogunMark--is it possible for an ExtRom to install fine for AKU3.2, then same extact ExtROM (no rebuild, no changes, didn't even look at it funny!) not install on 2.26 (installed it twice on 2.26 in case it might have been corrupt the first time)? That's the situation I'm looking at. Originally the extROM (the one that worked for AKU3.2 but not on 2.26) had a few cabs with spaces in their names. When I started having problems on 2.26 I started looking closer and rebuilt the ExtROM with new file names, but it still wouldn't install on 2.26. Just to make sure I'm not crazy, I'm about to down-grade to AKU2.3 OS version 2.24 to fully comply with the ROM building tutorial that says its tested to at least OS version 2.25. I'll let you know how that goes in a few hours. In the meantime, here's the Config.txt I'm using now that won't go in auto, but allows me to install the cabs by hand in 2.26:
LOCK:Enabled
CAB: \Extended_ROM\cLaunch.arm.CAB
CAB: \Extended_ROM\Molski.Biz_VoiceDial_Button_Customizer.cab
CAB: \Extended_ROM\Molski.Biz_Customizing_Tweaks.cab
CAB: \Extended_ROM\Molski.Biz_Performance_Registry_Tweaks.cab
CAB: \Extended_ROM\nullkb.ARM4.CAB
CAB: \Extended_ROM\rar360.ppc_arm.cab
CAB: \Extended_ROM\SmartDial+EtenSkinPortretD_v2.cab
CAB: \Extended_ROM\fileaslf.arm.cab
LOCKisabled
RST: Reset
jorge_culv said:
Thanks for the help ShogunMark--is it possible for an ExtRom to install fine for AKU3.2, then same extact ExtROM (no rebuild, no changes, didn't even look at it funny!) not install on 2.26 (installed it twice on 2.26 in case it might have been corrupt the first time)? That's the situation I'm looking at. Originally the extROM (the one that worked for AKU3.2 but not on 2.26) had a few cabs with spaces in their names. When I started having problems on 2.26 I started looking closer and rebuilt the ExtROM with new file names, but it still wouldn't install on 2.26. Just to make sure I'm not crazy, I'm about to down-grade to AKU2.3 OS version 2.24 to fully comply with the ROM building tutorial that says its tested to at least OS version 2.25. I'll let you know how that goes in a few hours. In the meantime, here's the Config.txt I'm using now that won't go in auto, but allows me to install the cabs by hand in 2.26:
LOCK:Enabled
CAB: \Extended_ROM\cLaunch.arm.CAB
CAB: \Extended_ROM\Molski.Biz_VoiceDial_Button_Customizer.cab
CAB: \Extended_ROM\Molski.Biz_Customizing_Tweaks.cab
CAB: \Extended_ROM\Molski.Biz_Performance_Registry_Tweaks.cab
CAB: \Extended_ROM\nullkb.ARM4.CAB
CAB: \Extended_ROM\rar360.ppc_arm.cab
CAB: \Extended_ROM\SmartDial+EtenSkinPortretD_v2.cab
CAB: \Extended_ROM\fileaslf.arm.cab
LOCKisabled
RST: Reset
Click to expand...
Click to collapse
the problem is that you are missing the disable security cab, i have attached in case you need it.. I would also bet those spaces arent suppose to be there... you should have this:
LOCK:Enabled
CAB: \Extended_ROM\Default_Signed_DisableSecurity.CAB
CAB: \Extended_ROM\cLaunch.arm.CAB
CAB: \Extended_ROM\Molski.Biz_VoiceDial_Button_Customizer.cab
CAB: \Extended_ROM\Molski.Biz_Customizing_Tweaks.cab
CAB: \Extended_ROM\Molski.Biz_Performance_Registry_Tweaks.cab
CAB: \Extended_ROM\nullkb.ARM4.CAB
CAB: \Extended_ROM\rar360.ppc_arm.cab
CAB: \Extended_ROM\SmartDial+EtenSkinPortretD_v2.cab
CAB: \Extended_ROM\fileaslf.arm.cab
LOCKisabled
RST: Reset
Ahh, so even though one of Molski's cabs does this, I need to disable security first to allow the other cabs to install? I think I get it! Thanks again,
Geo
jorge_culv said:
Ahh, so even though one of Molski's cabs does this, I need to disable security first to allow the other cabs to install? I think I get it! Thanks again,
Geo
Click to expand...
Click to collapse
yes, you need that or the other cabs wont install, most importantly it needs to be first, or else anything else that isnt signed wont install
Hi,
the thing holding me back from updating the ROM is i want to wait until it is close to perfect so i only have to do it once and only have to put in all the damn phone settings (3 Australia) once..... otherwise i have to go thru all that stuff over and over again each time i update the ROM.
Is it easy to make a cab file with the three settings so we can continually update roms etc and easily get our settings back?
Is anyone able to point me in the right direction of how to do this? Or give me instructions of how to do it? Or can some kind heart can do it for me ;-)
I would love to have a crack at this......
thanks
Scott
Okay, have mounted exended ROM and now have extraced all files form there to my storage card-
the files i have are:
EXEC:\Windows\SetHSDPA.exe /Enable
CAB: \Extended_ROM\CP_TSK.CAB
CAB: \Extended_ROM\070119_AgentCab.enus.CAB
CAB: \Extended_ROM\070119_CamAgentCab.enus.CAB
CAB: \Extended_ROM\CVC-PPC-WWE-611082-DopodTrinity.CAB
CAB: \Extended_ROM\MP_MMS3.5_Dopod_Asia_Trinity_060816_1.CAB
CAB: \Extended_ROM\PP_Button1.cab
CAB: \Extended_ROM\TaskManager_IconPatch_20061101.CAB
CAB: \Extended_ROM\PP_Generic_UI_DefaultPage_AK3.3_1228.CAB
CAB: \Extended_ROM\WWE-D810-ExtUp-V12b.CAB
CAB: \Extended_ROM\PP_Dopod_Agent_icon.CAB
CAB: \Extended_ROM\Signed_Dpdcert_222.cab
CAB: \Extended_ROM\TimeZone_PS3662.CAB
XML: \Extended_ROM\PP_Ecall.xml
EXEC:\Extended_ROM\ChgScutAttri.exe
do all of them have to be installed in the new ROM?
Where do i install them on a new rom?
Is there an extended rom on the mun and lsvw WM6 roms?
thanks
Scott
any progress on the 3 cabs?
Hey there, I have just upgraded to WM6.5 and can't find the cabs for 3 anywhere.
I've tried manually setting, even tried the config utility, but unfortunately no little icon etc to connect to 3....
I came across your post and was wondering if you have the files or even better just the install cab as one file...
could you please post them....?
cheers maaate