Database Develop

New TelecomMobile Harrier ROM WWE 135

I've just uploaded to a recently release WWE 135 upgrade from the TelecomMobile Harrier.
It's at:
ftp://xda:[email protected]/BlueAngel/Harrier H20A2/
I'm about to install it, but feel free to scrounge anything useful from it.
Update:
Old ROM:
CE 1.29.00
Ext ROM 1.29.118
Radio HA01_136
New ROM:
CE 1.35.00
Ext ROM 1.35.117
Radio HA01_141
Later'ish
Craig

does the old passwords works with this rom or it requires new. pls kindly specify.
thanks
jeet

Why don't you try it?
For CraigHumphrey this is a same operator upgrade thus he does not need tofix it but run the ship.exe

Craig
I have cooked your NZTelecom Harrier 1.29.118 WWE Ext Rom, you might want to look at it.
http://wiki.xda-developers.com/index.php?pagename=BA_ERK_X_129118
I have renamed the file to stay with the current format and posted it back on the ftp site.
I have added it the Available Ext Roms page on wiki
http://wiki.xda-developers.com/index.php?pagename=BA_ERK_Available_Ext_Roms
I have added the Harrier web update page to Available Upgrades in Wiki
I Have added the above update to Available Upgrades on wiki.
http://wiki.xda-developers.com/index.php?pagename=BA_Upgrades
Would you please upload your 1.35 Exteneded rom to:
ftp://xda:[email protected]/BlueAngel/Extended_Roms/New_ROMS
Would you please post the Windows version and build Number reported by your device.
I know that you have no WIFI on the harrier, however it would intrest me to see if your 1.35 build would support it. Can you please check if you can find the following under \Windows:
WirelessMgr.exe
WirelessMgr.exe.0409.mui
WLanMgr.exe
Stk.exe
And post your answer.
Thanks

the old passwords dont work with the new pls any new passwords for this rom. it doesnt accepts the old passwords.
thanks
jeet

Hmm.. I had already replied to this, but it seems to have gotten lost, so here it is again
MDAIIIUser said:
Craig
Would you please upload your 1.35 Exteneded rom to:
ftp://xda:[email protected]/BlueAngel/Extended_Roms/New_ROMS
Click to expand...
Click to collapse
Done
MDAIIIUser said:
Would you please post the Windows version and build Number reported by your device.
Click to expand...
Click to collapse
Windows Mobile 2003 Second Edition
Version 4.21.1088 (Build 14132)
MDAIIIUser said:
I know that you have no WIFI on the harrier, however it would intrest me to see if your 1.35 build would support it. Can you please check if you can find the following under \Windows:
WirelessMgr.exe
WirelessMgr.exe.0409.mui
WLanMgr.exe
Stk.exe
Click to expand...
Click to collapse
None of those files exist.
Reminds me, I need to get a new WiFi card (the SanDisk 256MB + WiFi was unsupported).
Later'ish
Craig

Cooked the Ext Rom
http://wiki.xda-developers.com/index.php?pagename=BA_ERK_Cooked131

Ran the
NZTelecom Harrier 1.35.117 WWE ERK_1.3x_002
Through the kitchen
http://wiki.xda-developers.com/index.php?pagename=BA_ERK_X_135117

Interesting... Craig, could you please post the BT stack version/build after applying this update?
BT Icon -> Bluetooth settings -> About tab

mjb said:
Interesting... Craig, could you please post the BT stack version/build after applying this update?
BT Icon -> Bluetooth settings -> About tab
Click to expand...
Click to collapse
Bluetooth for WIndows CE
BT-PPC/PE Version 1.0.0 Build 3500.
Under the Advanced button, all components have the same version as above (1.0.0.3500).
Later'ish
Craig

The file is corrupt
I've downloaded it twice and still only comes to 22.9MBytes. WINRAR hates it. The executable won't unpack either.
I would like to get the HA01_141 radio to try on my XV6600. If anyone has a link to a good copy of this file... let me know.
Ehud

Re: The file is corrupt
gavron said:
I've downloaded it twice and still only comes to 22.9MBytes. WINRAR hates it. The executable won't unpack either.
I would like to get the HA01_141 radio to try on my XV6600. If anyone has a link to a good copy of this file... let me know.
Ehud
Click to expand...
Click to collapse
Which file is corrupt?

I downloaded it from here:
http://www.telecom.co.nz/content/0,3900,202143-203139,00.html
Then I had to do a couple of modifications to get it to flash using the magician patched flasher.
However, although it worked correctly with the Sprint EV-DO PRL for voice calls, the data connection was hosed.
It has some sort of special Kiwi customization in it . The #777 connection ends up with a password, even if I try to set it up from scratch (without running anything from extrom!). I remove the password and save the changes and then it comes back... it's obviously embedded in the HA01_141 radio ROM, and thus prevents my Sprint 6600 from connecting to #777.
The good news is that the Telstra and Verizon HA01_140 Radio_ roms do work for voice and data (although roaming isn't working).
Dan

Re: The file is corrupt
CraigHumphrey said:
gavron said:
I've downloaded it twice and still only comes to 22.9MBytes. WINRAR hates it. The executable won't unpack either.
I would like to get the HA01_141 radio to try on my XV6600. If anyone has a link to a good copy of this file... let me know.
Ehud
Click to expand...
Click to collapse
Which file is corrupt?
Click to expand...
Click to collapse
The one mentioned at the top of this thread on the xda-developers ftp site. The one Dan mentioned works just fine. Someone with write capabilities should replace the one on the xda-developers ftp site...
Ehud

done!
Downloaded of link
Uploaded to ftp
corrected link in wiki

why is the rom directory empty?

Guys, I know this isn't room for asking.... but, please help me with my Sprint 6600 Harrier.
I just upgrade the new ROM (WM6.1) to my PDA. But this is my stupidity, i installed the ROM that use for GSM device, while my device is CDMA.
How to rolled back to WM2003 or higher for may PDA. Pleade guys help me.... I've desperate for this... (
Thanks for your kindnes...

You cannot upgrade the Sprint or Verizon 6600 model to WM5 or WM6 or higher. No one has yet to be able to do it. I've tried many times. You need to flash your device back with a Sprint PPC6600 ROM. The GSM ROMs are not compatible with your GSM device.
You should be able to depress the reset button with your stylus while pushing in the power and top button on left side all at the same time (a three handed job). This will put you in Serial mode (you'll see "Serial") faintly on a blanked out screen. Then you'll hook up your phone via usb cable to your computer. Then the "Serial" will change to "USB". Then you'll click on the ROM and flash it back to your Sprint PPC ROM.
There are some hacks you can do with your Sprint PPC 6600 which greatly improve its performance. There's some great Stereo Bluetooth drivers and lots of other stuff. You can unlock the extended ROM and customize the device quite nicely. You can even modify your device to work on Sprints EVDO Rev 0 network. You'll have to search this website and the Wiki to figure it all out.

@ Rambo6: Thanks for your respon.
But, I have no WM2003 ROM to flash it back. Or i can do hack my device with stereo bluetooth and unlock the extrom for flash it back?

You need to flash back to an original ROM. You need to find a ROM for an HTC Harrier (Audiovox/Verizon xv6600 or Sprint PPC6600). UT Starcom used to have these ROMs on their website. Last time I looked they were not there. I have one of these on a harddrive somewhere.
Do some web searches and you can probably find it somewhere.

P3600i SUCCESSFULL FLASH OF WM6.1 (includes instructions)

*** UPDATED TO MAKE A LITTLE MORE CLEARER *** Please do not ask for screenshots - time does not allow me to do it)
Thanks to Olipro, and some digging on my part (I just needed to dig around to figure out how)
Step 1 - Anyway First of all, load the Hard SPL to your phone from : http://forum.xda-developers.com/showthread.php?t=398742
Now, as stated in the first post at: http://forum.xda-developers.com/showthread.php?t=328147, we need to re-build the nbh file with a 401 tag rather than a 400 tag.
Step 2 - So, what I did was to download RUU_TRINITY_WM6.1_WWE_ASIA_3.12.YK.Lite extract into its own folder (Mary seems to work as well)
Step 3 - then download the custom ruu updated from here: http://forum.xda-developers.com/showthread.php?t=295113 - also get the rombaker for trinity as found further down in the post.
Step 4 - unzip the custom_ruu stuff, put in the downloaded trinity rombaker to replace extracted rombaker,
Step 4a - Copy ruu_signed.nbh file that is found in folder created in Step 2 to the rombaker/workshop folder created in step 4
Step 5 - then use nbhextract (created in step 4) to extract the ruu_signed.nbh file that is now in the workshop folder
Step 6 - watch the output. (for file names)
Step 7 - Run the rombaker program and load the extracted files into their places (as referred to in step 6), then click generate NBH
It will ask you to save a file. call it new_nbh (or whatever you want) -
Step 8 - open this file (created in step 7) in notepad, and change the number 400 (about 5 lines down) to 401 save and exit
Step 9 - then open a dos/cmd/command.com window (whatever you want to call it), cd to the rombaker/workshop folder and then run the following:
nbhgen new_nbh.txt
NOTE: new_nbh.txt should be the same as the filename created in step 7
copy the generated RUU_signed.nbh file back to the RUU_TRINITY_WM6.1_WWE_ASIA_3.12.YK.Lite folder.
Your p3600i rom is now ready for flashing
----------------------------------------------
because the rom package doesnt know about differences in the p3600i bootloader, it cant jump to the correct bootloader and as such you will not be able to flash until you have got the new SPL from olipro installed, and running on the device - to do this, make sure step 1 has completed, then:
restart the phone by holding the power and camera buttons down and pushing the reset button simultaneously.
it should reboot into the 3 color band boot loader mode.
run the romupdate utility found in step 2
go to http://forum.xda-developers.com/showthread.php?t=398742 and click on the "donate" button for olipro, and donate.
make phone calls.
Thanks
http://whats.cool.net.au

THEORETICALLY This should work with any trinity rom BUT
This method should work with any trinity rom. although it does not seem to work with Trinity WM6.1.Black Edition.OS Version CE 5.2.19701 Build 19701.1.0.2 by Akeo, nor the Elegance 6.1 rom - upon reboot I just get grey/white banding across the screen and it wont start.
One thing to note is that 1st boot seems to take ages, but after that it works great.

ajajaj said:
This method should work with any trinity rom. although it does not seem to work with Trinity WM6.1.Black Edition.OS Version CE 5.2.19701 Build 19701.1.0.2 by Akeo, nor the Elegance 6.1 rom - upon reboot I just get grey/white banding across the screen and it wont start.
One thing to note is that 1st boot seems to take ages, but after that it works great.
Click to expand...
Click to collapse
Well done. Pity it doesn't work with Black Edition by Akeo. That is a nice ROM and I would love to use it.
I really don't want an Ultra-lite ROM....I want something with all the trimmings.
Now we need a few ROM Cookers to come up with some good stuff for the P3600i.

I cannot for the life of me get the Hard SPL to complete using Vista.
I have gone through the process of putting the XP drivers on as per the Trinity Guide...not real sure why the phone needs to be in Bootloader mode for this, but I followed the instructions to a tee.
Where am I going wrong....I end up with error 260.
I will search again and see what turns up in the meantime.
Edit: I think I will try it from my Laptop tomorrow, it runs XP so I will see how that goes.

Andych said:
I cannot for the life of me get the Hard SPL to complete using Vista.
I have gone through the process of putting the XP drivers on as per the Trinity Guide...not real sure why the phone needs to be in Bootloader mode for this, but I followed the instructions to a tee.
Where am I going wrong....I end up with error 260.
I will search again and see what turns up in the meantime.
Click to expand...
Click to collapse
no good on Vista eh? not surprised... we can try using the Polaris RUU, for the flash, I bet you anything that'll do the trick.

Olipro said:
no good on Vista eh? not surprised... we can try using the Polaris RUU, for the flash, I bet you anything that'll do the trick.
Click to expand...
Click to collapse
Yet one of the others says he did it OK on Vista....so buggered if I know....maybe I was holding my head the wrong way.
I will try it on XP tomorrow....hopefully once the Hard SPL is on there Vista will not be an issue any more.

NBHUtil is better for repackaging NBH files really... I'll attach my latest build with support for the P3600i shortly

OK...this may be a really dumb question (so I expect offensive answers) but why does the standard HTC WM6 ROM work for both D810 (128 meg ) and P3600i (265 meg )......yet the cooked ROM's which work on the D810 won't work on the HardSPL P3600i????
Just trying to get me head around it logically.

ajajaj said:
Thanks to Olipro, and some digging on my part (I just needed to dig ar would u like to add screenshut part by part? it'll looks more easy for all
Click to expand...
Click to collapse

thks Olipro, you're the man.

Andych said:
OK...this may be a really dumb question (so I expect offensive answers) but why does the standard HTC WM6 ROM work for both D810 (128 meg ) and P3600i (265 meg )......yet the cooked ROM's which work on the D810 won't work on the HardSPL P3600i????
Just trying to get me head around it logically.
Click to expand...
Click to collapse
the rom is the same, it is just that it gets put in a different place for the p3600i (401, instead of 400)
this is why the ruu_signed.nbh file needs to be rebuilt.

Andych said:
I cannot for the life of me get the Hard SPL to complete using Vista.
Click to expand...
Click to collapse
there is a guide to installing vista drivers that works - main thing is to get the phone into bootloader mode, delete the drivers and install the other ones.
thats all I did.

Tried that...didn't work for me but I will try from XP today sometime.

ajajaj said:
the rom is the same, it is just that it gets put in a different place for the p3600i (401, instead of 400)
this is why the ruu_signed.nbh file needs to be rebuilt.
Click to expand...
Click to collapse
Then theoretically it should work on all cooked ROM's so long as the ruu_signed.nbh file is re-built.
I know....theoretically doesn't always relate to does...
OK well at least I have had my curiosity sated....for now.

maybe it's just me, but i can't get this to work. i've followed the instructions but i get stripes across the screen after the update. i don't think i am patching the image correctly. i'm using the RUU_TRINITY_WM6.1_WWE_ASIA_3.12.YK.Lite rom as mentioned here and getting nowhere. would i be crazy in asking if someone could post a link to a pre-patched ROM that i can install?
any help is greatly appreciated

I had tried a few times one 2 mechine
one on winxp and one on win2k3
but both mechine show the same error when i do the step 1
the phone go to 3 color but in pc side it shows the ERROR [260] message
don't know how to do ><

try to flash my CHT9110 follow the instruction of ajajaj (thks) on Vista. Hard spl of Olipro ater several try now OK. boot loader TRIN100 IPL-1.00 SPL-3.2.Olipro but after i flash WM6.1, i got #226 FLASH WRITE. (alredy change nbh to 401 as instruct)
what should i do, need help urgently

Hi all,
tried to make the new rom as instructed, but the new nbh file output is approx. 100mb while the original nbh is approx. 40mb... does this make sense?
other than that, when i tried to flash my p3600i, the rom update utility is stuck on 15% for more than 1 hour!
can anyone point me to where i can download the original p3600i rom in order to "heal" my device?
10x

amanx said:
I had tried a few times one 2 mechine
one on winxp and one on win2k3
but both mechine show the same error when i do the step 1
the phone go to 3 color but in pc side it shows the ERROR [260] message
don't know how to do ><
Click to expand...
Click to collapse
I get the 260 Error on both XP & Vista.

after several time...i got pass all flash porcess "congratulation" but my CHT9110 got stuck in boot screen...
pls give me any advise ajajaj?

Please Help me to downgrade to WM2003

Hi, I have HTC Blue Angel running WM6.5 and find that it struggles to run at this level, i am looking to downgrade to the original wm2003 that it came with, I am on Orange UK
Current Seetings :-
Rom Version : 6.5.23004EN
Rom Date : 06/12/09
Radio Version : 1.15.00
Protocol Version : 1337.45
Extrom version : 23004-xplode
could anyone help and tell me excactly what files i need to download to restore to original shipped state and exactly how to carry out the downgrade.
Regards,
John.

welcome to the forum!
ok, what you need is:
- a pc, preferably with windows xp
- a wm2003 rom in your preferred language, e.g. from -=xplode's shipped rom archive=-
-a RUU (Rom upgrade utility), you can try mine there (attached)
and then you go to the -=wiki wizard for downgrading=- and follow the instructions there or follow these shortened instructions:
1. hard reset your device: power+reset, then camera and record, change the values in the menu from No, No, Yes to YES, YES, NO using the camera and record buttons, confirm with the mail button.
2. put your device in bootloader mode
3. connect it to the pc using the cradle or a usb cable
4. extract the shipped rom in any folder
5. put the maupgradeut_noid in there and start it
6. have a look, whether the 2nd page shows device and rom information, if not, exit, start task manager and kill activesync (wcesmgr and wcescomm) and go back to step 2
7. start the "upgrade"
8. when it's done, perform a wm2003 hard reset by pressing power+reset, and wait for the versions to show up in the bottom right corner, if all the values changed from your previous wm6.5 versions, you're probably fine and done by now.
in very rare cases, something goes wrong, some combinations of pcs and devices wouldn't work with my ruu, but you would realise that at step6 or 7, try and download another ruu then and try again, i think there also is one linked in the wiki.
at the end, your device should read something like:
R:1.12.00
G:1337.42
D:1.06.02
with best regards
Chef_Tony

Decided to go for windows pocket 2005
Thanks Chef_Tony im afraid im running vista and have tried using mtty but with no success, I have now decided to downgrade to pocket 2005, is this possible and how would i do it with windows vista as i am unable to downgrade to XP. Please help if possible.
Thanks John

Bootloader
Hi i dont know if this makes any difference my Bootloader is showing Version 2.05 Reagrds.

no, it does not make any difference, since the bootloader's version is not the problem. before you go on doing anything, you should have a good look at this site:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardUpgrade4_Vista_Pic
and unless you are sure, the installation of the driver was successful, you should not attempt to flash the device, because then you will end up with a half-flashed device, that cannot be switched on and maybe also not flashed anymore.

http://firmware.atspace.com/ can't be accessed. is there any other site for wm2003se rom ?

I have the same problem, as i m downgrading to WM 2003, i followed all the instructions as u mentioned here, but when i run "maupgradeut_noid" it always said that this ROM is not for your device, i have Orange SPV M2000 (Blue Angel), please help i cant able to downgrade to WM 2003.
One more thing is there any way to Merge ExtROM with Storage in Windows MObile 6.5?

byudi23 said:
http://firmware.atspace.com/ can't be accessed. is there any other site for wm2003se rom ?
Click to expand...
Click to collapse
http://firmware.atspace.com/Blueangel.html
working flawlessly for me. check now

subratamm said:
http://firmware.atspace.com/Blueangel.html
working flawlessly for me. check now
Click to expand...
Click to collapse
still can't open http://firmware.atspace.com/Blueangel.html too

ok, we are dealing with several different things here:
1. the storage resize:
no, it can only be done in wm2003, no way to do it in wm5 or above, you have to downgrade
2. while attempting to downgrade, don't forget to put your device into bootloader mode, before connecting and starting maupgrade, then there will be no device error anymore.
3. of course for downgrading you need the original rom, at best from xplode's shipped rom archive, if you can't access it, just tell me your favoured language and country, and i will look it up and send you the direct download link. btw. xplode's site works fine!

favoured languange : English
Country : Indonesia
please send me the direct link. thx a lot. chef_tony

since he doesn't have indonesian roms and you are fine with english, here are the links of 2 different UK roms, you should be fine with.
T-Mobile UK WWE 1.42.00 1.42.112 1.13.00 Download (Ziddu) / Mirror 1 (Rapidshare) / Mirror 2 (Megaupload)
O2 UK WWE 1.40.00 1.40.242 1.12.00 Download (Ziddu) / Mirror 1 (Rapidshare) / Mirror 2 (Megaupload).
i hope these links work for you.

thx a lot chef_tony. I almost forgot. I want to ask whether the different rom can drain the battery fastly ? because my battery drain faster using WM6.5.

the power consumption of the device mainly consists of 2 things:
- wireless communications (gsm, gprs, bluetooth, irda, wi-fi)
- hardware usage (cpu & ram)
the wireless does not really vary from rom to rom but much like on the pc, graphically more intense applications use more power and since wm6.5 has a much nicer shell, it uses more ram and cpu to run. that uses more power.
if you want to save battery, reduce the backlight intensity, let the device switch off faster and end all applications that you don't need and de-activate wireless communications that you don't use. still then the battery life is limited but that is something you will have to learn to put up with.

thx chef_tony. I want to ask about the memory used ? is it better with storage 42mb and program 90 mb or repart it into default which is storage 60mb and program 60 mb ? is this RAM configuration also affect the battery consumption ?

no, that has nothing to do with that, because you don't resize the ram, you resize the extrom and the storage. that doesn't have any influence, kind of like the size of the sd card does not have influence.

Chef_Tony said:
welcome to the forum!
ok, what you need is:
- a pc, preferably with windows xp
- a wm2003 rom in your preferred language, e.g. from -=xplode's shipped rom archive=-
-a RUU (Rom upgrade utility), you can try mine there (attached)
and then you go to the -=wiki wizard for downgrading=- and follow the instructions there or follow these shortened instructions:
1. hard reset your device: power+reset, then camera and record, change the values in the menu from No, No, Yes to YES, YES, NO using the camera and record buttons, confirm with the mail button.
2. put your device in bootloader mode
3. connect it to the pc using the cradle or a usb cable
4. extract the shipped rom in any folder
5. put the maupgradeut_noid in there and start it
6. have a look, whether the 2nd page shows device and rom information, if not, exit, start task manager and kill activesync (wcesmgr and wcescomm) and go back to step 2
7. start the "upgrade"
8. when it's done, perform a wm2003 hard reset by pressing power+reset, and wait for the versions to show up in the bottom right corner, if all the values changed from your previous wm6.5 versions, you're probably fine and done by now.
in very rare cases, something goes wrong, some combinations of pcs and devices wouldn't work with my ruu, but you would realise that at step6 or 7, try and download another ruu then and try again, i think there also is one linked in the wiki.
at the end, your device should read something like:
R:1.12.00
G:1337.42
D:1.06.02
with best regards
Chef_Tony
Click to expand...
Click to collapse
THANK YOU VERY MUCH! It was very helpfull!

Showing white screen after hard reset
Dear Tony,
Since I wanted to get more space for my Xda iis tonight, so I install a unlock softwares to unlock the Extrom according to some indication on web, also I format it after scusseful to get a extrom, but I got a freezable white screen after using hard reset, the programe showing rom upgard scussefully but it cannot get into window: Could you teach me how to fix this problem? Can I save my xda IIS?
Thank you so much for your help.
Simon

please do not double post! i answered this exact question in the thread you opened for that.

thanks chef tony!

Recovering a harrier device

Ok, so I tried installing the WM6 rom on my device without knowing it was in fact a Harrier and not a Blue Angel. I now realize I was very stupid in doing this. Now when it boots I get the stripes on the screen and "No GSM, D 5.60.00 WWE" written in the bottom right corner of the screen.
Does any one have an original Harrier rom they could upload so I can flash it back to the original WM2003?
If no one has that, is there a way to copy the rom from another, identical device?

xplode has a great firmware archive, where you can find about any original shipped rom, for the harrier, you find it here: http://firmware.atspace.com/Harrier.html

Thanks Chef_Tony. Thats got it working again perfectly.

i have the same problem it now says no gsm ....
what software do i need to make it work again ?
thx
andy

gripperwod said:
i have the same problem it now says no gsm ....
what software do i need to make it work again ?
Click to expand...
Click to collapse
Hit the link that Chef Andy listed, find your carrier in that list and download the latest one available

what i meant is which 1 do i download from the link chef andy left do i just use the upgrade tool or radio if so how do i find out which version i need ?
thanks
andy

gripperwod said:
what i meant is which 1 do i download from the link chef andy left do i just use the upgrade tool or radio if so how do i find out which version i need ?
Click to expand...
Click to collapse
Again, find your carrier (I'm assuming that the phone was running the official ROM that it shipped with for your carrier) in that list and download the latest one available. No one can tell you which one to download as no one else but you knows who your carrier is.
The radio version doesn't matter in this situation as the OS is coded to deal with a CDMA radio stack, and most, if not all, official ROM flashers will flash the radio stack with the OS. You are going to have to flash it back to whatever OS and build (usually WM2003 for the Harrier) is provided in the archive. If there are multiple versions of the ROM/radio available, generally the newer ones are the better ones.
You shouldn't need anything special for this as you will be flashing the official ROM for the phone. Download, run the executable and follow the on screen instructions.

ok ive downloaded all from these links and it tells me each flash ..
the rom image is not designed for your device . error code is wrong country code !!
i tried simunlock and now have no gsm showing in boot .
it was on uk orange network the phone is spv m2000
thx

well, your device is a blueangel, this thread is about the harrier. it deals with people trying to recover their CDMA devices after a bad flash, you have a GSM device, a completely different phone, and also, the source of your problem is not the same. thank god, the flash did not work, or your phone would be bricked for good.
you need to do a completely different procedure:
1. you go to xplode's BLUEANGEL firmware archive at http://firmware.atspace.com/Blueangel.html and download any rom in your language / from your country. then you put your device into bootloader mode and flash the device using maupgradeut_noid, found here: http://rapidshare.com/files/322928773/Chef_Tony_RUU.zip
2. then, when you have wm2003 back, please post back for further steps to go.

thank you i will do as you said and report back thx mate , ps are you realy a chef because i am lol i have been a chef around 26 years.

ok downloaded the orange uk but its file is corrupt so executable failed ...
looks like im not going to win ..
tried other orange uk files further down the list but still says country error code.

yes, the country id error is the reason, why you need to extract the 40mb exe file, put maupgrade in there, from the link i provided earlier, another thing to avoid the country id error, is to put the device into bootloader mode before starting the upgrade process, so, before you put the blueangel into the cradle, you press record+power+reset, until the display shows "Serial" and "V2.0x" where x is a number from 5 to 7, then you connect the device and start maupgradeut_noid.exe, which has to be in the same folder as the nk.nbf and all the other needed files. using the maupgrade instead of the BAupgrade and using the bootloader mode avoids nearly all the errors, like country id, device id and so on.
EDIT: btw. i am not a chef, i am a system administrator, the avatar and username are just my regular online name, named after the most ridiculous chef on american tv ^^

gripperwod said:
thank you i will do as you said and report back thx mate , ps are you realy a chef because i am lol i have been a chef around 26 years.
Click to expand...
Click to collapse
Tony is right, your phone would have been bricked.
For future reference, when you post, make sure to list your carrier and the exact model of phone. Anyone in these forums needs this info to attempt to offer the correct information to help.
In my posts, as Tony mentioned, this thread was dealing with Harriers, the CDMA version of the Blue Angel. When you jumped in, I thought that you were talking about a Harrier as well.
Keep in mind that each phone has it's specific ROM designed for that single model of phone alone, they are not interchangeable.

hi
after long time thought i might have another go ...
all the links you have supplied dont work eg: file is corrupt is the message im getting when trying to install software to pc.
i need the factory cd rom for the : orange spv m2000
i have no gsm on the phone since i upgraded the phone to wm6.5
ce os 5.2.21169 (build 21169.5.0.0)
please help
thx

task29 without drivers, without mtty.??

task29 without drivers, without mtty.
anyone to say me if :
is it possible to do a task29 on the blackstone like on the Leo (http://forum.xda-developers.com/showthread.php?t=644781) ?

Answered many time. A few threads about it. Try searching first.

i wish it whas possible
there isnt a hex edited one for blackstone
you could look into mtty it does the same but takes some more steps and using cmd

Possible..
eucher said:
task29 without drivers, without mtty.
anyone to say me if :
is it possible to do a task29 on the blackstone like on the Leo (http://forum.xda-developers.com/showthread.php?t=644781) ?
Click to expand...
Click to collapse
Yes it is possible I use it on my Blackstone without any problems.
Only thing you need think about is to download the one without anythings from HD2 and to download a radio for Blackstone.
Rainbow86

eucher said:
task29 without drivers, without mtty.
anyone to say me if :
is it possible to do a task29 on the blackstone like on the Leo (http://forum.xda-developers.com/showthread.php?t=644781) ?
Click to expand...
Click to collapse
"Just unzip and run task29.exe . You may replace ruu_signed.nbh with the radio of your choice."
If i understand the first post of the thread right, you have to exchange the supplied "ruu_signed.nbh" with a blackstone radio rom, as mentioned above.

Rainbow86 said:
Yes it is possible I use it on my Blackstone without any problems.
Only thing you need think about is to download the one without anythings from HD2 and to download a radio for Blackstone.
Rainbow86
Click to expand...
Click to collapse
you mean to say, you've used the Task 29 in the Leo/HD2 Thread and paired it with
a Blackstone radio and flashed this in the Blackstone?
and it all went well? how can one be certain that it has indeed formatted
the ROM partition of the Blackstones drive?

jigners said:
you mean to say, you've used the Task 29 in the Leo/HD2 Thread and paired it with
a Blackstone radio and flashed this in the Blackstone?
and it all went well? how can one be certain that it has indeed formatted
the ROM partition of the Blackstones drive?
Click to expand...
Click to collapse
I guess the test would be to run it and let the phone boot up after. If there is no rom there will be nothing to boot into.
One can also use a splash.nbh file together with the Task29. It should be quicker as the file is smaller than a radio file.

ok, done some search and here are some good news
http://forum.xda-developers.com/showpost.php?p=5887613&postcount=81

nice
think i am gonna try it to see if it makes a difference
edit: performing it now will report if it will boot when its finished
edit2: the phone is defiently empty
i only see the samrt mobility screen
the red numbers in the right corner arent there either
gonna flahs a testrrom to see if it will work again
edit3: well it feels slightly faster but could be placebo

CONFIRMED: Task 29 Hex edited from HD2 thread
Task 29 from Leo thread:
Positively confirmed TO WORK for the Blackstone
but i have to install HSPL Olinex first
here are the steps i've done
1. made a folder and put together task 29 and added the .nbh file of Dutty
3.9xt (could be any ROM) note: i tried to pair it with a radio
.nbh file of Radio 1.17 but the process hit an error code while trying to run
task 29.
2. connected phone (using XP) then run task 29 exe file
3. when it finished (a long time) it booted but without the red numbers and
words on the lower right hand side - this is a confirmation that the device
has been formatted
4. made another folder with two files (DUtty 3.9XT .nbh file and the RUU)
5. run RUU (HSPL Olinex already installed previously) and the whole thing
worked
so im back with my FIRST EVER custom ROM for my old Blackstone
(got the HD2 now with TOpix 1.5.7
here is the Task 29 .exe file (use the first one, NOT ShaDrac's)
http://forum.xda-developers.com/showpost.php?p=5845908&postcount=1